arXiv subjects

Steph Sallum

Publications and source records attributed to Steph Sallum.

At least 55 records · Page 3Linked to original sources

arXiv2023

A Large Double-ring Disk around the Taurus M Dwarf J04124068+2438157

Planet formation imprints signatures on the physical structures of disks. In this paper, we present high-resolution ($\sim$50 mas, 8 au) Atacama Large Millimeter/submillimeter Array (ALMA) observations of 1.3 mm dust continuum and CO line emission toward the disk around the M3.5 star 2MASS J04124068+2438157. The dust disk consists only of two narrow rings at radial distances of 0.47 and 0.78 arcsec ($\sim$70 and 116 au), with Gaussian $σ$ widths of 5.6 and 8.5 au, respectively. The width of the outer ring is smaller than the estimated pressure scale height by $\sim25\%$, suggesting dust trapping in a radial pressure bump. The dust disk size, set by the location of the outermost ring, is significantly larger (by $3σ$) than other disks with similar millimeter luminosity, which can be explained by an early formation of local pressure bump to stop radial drift of millimeter dust grains. After considering the disk's physical structure and accretion properties, we prefer planet--disk interaction over dead zone or photoevaporation models to explain the observed dust disk morphology. We carry out high-contrast imaging at $L'$ band using Keck/NIRC2 to search for potential young planets, but do not identify any source above $5σ$. Within the dust gap between the two rings, we reach a contrast level of $\sim$7 mag, constraining the possible planet below $\sim$2--4 $M_{\rm Jup}$. Analyses of the gap/ring properties suggest a $\sim$Saturn mass planet at $\sim$90 au is likely responsible for the formation of the outer ring, which can be potentially revealed with JWST.

astro-ph.EP↗

arXiv2022

Detecting planetary mass companions near the water frost-line using JWST interferometry

JWST promises to be the most versatile infrared observatory for the next two decades. The Near Infrared and Slitless Spectrograph (NIRISS) instrument, when used in the Aperture Masking Interferometry (AMI) mode, will provide an unparalleled combination of angular resolution and sensitivity compared to any existing observatory at mid-infrared wavelengths. Using simulated observations in conjunction with evolutionary models, we present the capability of this mode to image planetary mass companions around nearby stars at small orbital separations near the circumstellar water frost-line for members of the young, kinematic moving groups Beta Pictoris, TW Hydrae, as well as the Taurus-Auriga association. We show that for appropriately chosen stars, JWST/NIRISS operating in the AMI mode can image sub-Jupiter companions near the water frost-lines with ~68% confidence. Among these, M-type stars are the most promising. We also show that this JWST mode will improve the minimum inner working angle by as much as ~50% in most cases when compared to the survey results from the best ground-based exoplanet direct imaging facilities (e.g. VLT/SPHERE). We also discuss how the NIRISS/AMI mode will be especially powerful for the mid-infrared characterization of the numerous exoplanets expected to be revealed by Gaia. When combined with dynamical masses from Gaia, such measurements will provide a much more robust characterization of the initial entropies of these young planets, thereby placing powerful constraints on their early thermal histories.

astro-ph.EP↗

arXiv2022

The Near Infrared Imager and Slitless Spectrograph for JWST -- V. Kernel Phase Imaging and Data Analysis

Kernel phase imaging (KPI) enables the direct detection of substellar companions and circumstellar dust close to and below the classical (Rayleigh) diffraction limit. We present a kernel phase analysis of JWST NIRISS full pupil images taken during the instrument commissioning and compare the performance to closely related NIRISS aperture masking interferometry (AMI) observations. For this purpose, we develop and make publicly available the custom "Kpi3Pipeline" enabling the extraction of kernel phase observables from JWST images. The extracted observables are saved into a new and versatile kernel phase FITS file (KPFITS) data exchange format. Furthermore, we present our new and publicly available "fouriever" toolkit which can be used to search for companions and derive detection limits from KPI, AMI, and long-baseline interferometry observations while accounting for correlated uncertainties in the model fitting process. Among the four KPI targets that were observed during NIRISS instrument commissioning, we discover a low-contrast (~1:5) close-in (~1 $λ/D$) companion candidate around CPD-66~562 and a new high-contrast (~1:170) detection separated by ~1.5 $λ/D$ from 2MASS~J062802.01-663738.0. The 5-$σ$ companion detection limits around the other two targets reach ~6.5 mag at ~200 mas and ~7 mag at ~400 mas. Comparing these limits to those obtained from the NIRISS AMI commissioning observations, we find that KPI and AMI perform similar in the same amount of observing time. Due to its 5.6 times higher throughput if compared to AMI, KPI is beneficial for observing faint targets and superior to AMI at separations >325 mas. At very small separations (<100 mas) and between ~250-325 mas, AMI slightly outperforms KPI which suffers from increased photon noise from the core and the first Airy ring of the point-spread function.

astro-ph.IM↗

arXiv2022

Efficient detection and characterization of exoplanets within the diffraction limit: nulling with a mode-selective photonic lantern

Coronagraphs allow for faint off-axis exoplanets to be observed, but are limited to angular separations greater than a few beam widths. Accessing closer-in separations would greatly increase the expected number of detectable planets, which scales inversely with the inner working angle. The Vortex Fiber Nuller (VFN) is an instrument concept designed to characterize exoplanets within a single beam-width. It requires few optical elements and is compatible with many coronagraph designs as a complementary characterization tool. However, the peak throughput for planet light is limited to about 20%, and the measurement places poor constraints on the planet location and flux ratio. We propose to augment the VFN design by replacing its single-mode fiber with a six-port mode-selective photonic lantern, retaining the original functionality while providing several additional ports that reject starlight but couple planet light. We show that the photonic lantern can also be used as a nuller without a vortex. We present monochromatic simulations characterizing the response of the Photonic Lantern Nuller (PLN) to astrophysical signals and wavefront errors, and show that combining exoplanet flux from the nulled ports significantly increases the overall throughput of the instrument. We show using synthetically generated data that the PLN detects exoplanets more effectively than the VFN. Furthermore, with the PLN, the exoplanet can be partially localized, and its flux ratio constrained. The PLN has the potential to be a powerful characterization tool complementary to traditional coronagraphs in future high-contrast instruments.

astro-ph.IM↗

arXiv2022

Simulating the performance of aperture mask designs for SCALES

Interferometric techniques such as aperture masking have the potential to enhance spatial resolution capabilities when imaging moderate-contrast sources with small angular size, such as close-in exoplanets and circumstellar disks around distant young stars. The Slicer Combined with an Array of Lenslets for Exoplanet Spectroscopy (SCALES) instrument, currently under development, is a lenslet integral field spectrograph that will enable the W. M. Keck Observatory to carry out high-contrast direct imaging of exoplanets between 2 and 5 microns. We explore the potential benefit of aperture masking to SCALES by testing the contrast achievable by several mask designs. The scalessim software package was used to simulate observations at wavelength bins in the M, L, and K bands, with optical path difference (OPD) maps used to simulate realistic Keck adaptive optics performance. Noise from astrophysical and instrumental sources was also applied to simulated signals. Mask designs were assessed based on depth of the generated contrast curves.

astro-ph.IM↗

arXiv2022

Design of an IR Imaging Channel for the Keck Observatory SCALES Instrument

A next-generation instrument named, Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy (SCALES), is being planned for the W. M. Keck Observatory. SCALES will have an integral field spectrograph (IFS) and a diffraction-limited imaging channel to discover and spectrally characterize the directly imaged exoplanets. Operating at thermal infrared wavelengths (1-5 micron, and a goal of 0.6-5 micron), the imaging channel of the SCALES is designed to cover a 12"x 12" field of view with low distortions and high throughput. Apart from expanding the mid-infrared science cases and providing a potential upgrade/alternative for the NIRC2, the H2RG detector of the imaging channel can take high-resolution images of the pupil to aid the alignment process.Further, the imaging camera would also assist in small field acquisition for the IFS arm. In this work, we present the optomechanical design of the imager and evaluate its capabilities and performances.

astro-ph.IM↗

arXiv2021

End-to-end Simulation of the SCALES Integral Field Spectrograph

We present end-to-end simulations of SCALES, the third generation thermal-infrared diffraction limited imager and low/med-resolution integral field spectrograph (IFS) being designed for Keck. The 2-5 micron sensitivity of SCALES enables detection and characterization of a wide variety of exoplanets, including exoplanets detected through long-baseline astrometry, radial-velocity planets on wide orbits, accreting protoplanets in nearby star-forming regions, and reflected-light planets around the nearest stars. The simulation goal is to generate high-fidelity mock data to assess the scientific capabilities of the SCALES instrument at current and future design stages. The simulation processes arbitrary-resolution input intensity fields with a proposed observation pattern into an entire mock dataset of raw detector read-out lenslet-based IFS frames with calibrations and metadata, which are then reduced by the IFS data reduction pipeline to be analyzed by the user.

astro-ph.IM↗

arXiv2021

Information Content Approach to Trade Studies for SCALES

The advantage of having a high-fidelity instrument simulation tool developed in tandem with novel instrumentation is having the ability to investigate, in isolation and in combination, the wide parameter space set by the instrument design. SCALES, the third generation thermal-infrared diffraction limited imager and low/med-resolution integral field spectrograph being designed for Keck, is an instrument unique in design in order to optimize for its driving science case of direct detection and characterization of thermal emission from cold exoplanets. This warranted an end-to-end simulation tool that systematically produces realistic mock data from SCALES to probe the recovery of injected signals under changes in instrument design parameters. In this paper, we quantify optomechanical tolerance and detector electronic requirements set by the fiducial science cases using information content analysis, and test the consequences of updates to the design of the instrument on meeting these requirements.

astro-ph.IM↗

arXiv2021

The Planetary Systems Imager Adaptive Optics System: An Initial Optical Design and Performance Analysis Tools for the PSI-Red AO System

The Planetary Systems Imager (PSI) is a proposed instrument for the Thirty Meter Telescope (TMT) that provides an extreme adaptive optics (AO) correction to a multi-wavelength instrument suite optimized for high contrast science. PSI's broad range of capabilities, spanning imaging, polarimetry, integral field spectroscopy, and high resolution spectroscopy from 0.6-5 microns, with a potential channel at 10 microns, will enable breakthrough science in the areas of exoplanet formation and evolution. Here, we present a preliminary optical design and performance analysis toolset for the 2-5 microns component of the PSI AO system, which must deliver the wavefront quality necessary to support infrared high contrast science cases. PSI-AO is a two-stage system, with an initial deformable mirror and infrared wavefront sensor providing a common wavefront correction to all PSI science instruments followed by a dichroic that separates "PSI-Red" (2-5 microns) from "PSI-Blue" (0.5-1.8 microns). To meet the demands of visible-wavelength high contrast science, the PSI-Blue arm will include a second deformable mirror and a visible-wavelength wavefront sensor. In addition to an initial optical design of the PSI-Red AO system, we present a preliminary set of tools for an end-to-end AO simulation that in future work will be used to demonstrate the planet-to-star contrast ratios achievable with PSI-Red.

astro-ph.IM↗

arXiv2021

First light of a holographic aperture mask: Observation at the Keck OSIRIS Imager

We report on the design, construction, and commissioning of a prototype aperture masking technology implemented at the Keck OSIRIS Imager: the holographic aperture mask. Holographic aperture masking (HAM) aims at (i) increasing the throughput of sparse aperture masking (SAM) by selectively combining all subapertures across a telescope pupil in multiple interferograms using a phase mask, and (ii) adding low-resolution spectroscopic capabilities. Using liquid-crystal geometric phase patterns, we manufacture a HAM mask that uses an 11-hole SAM design as the central component and a holographic component comprising 19 different subapertures. Thanks to a multilayer liquid-crystal implementation, the mask has a diffraction efficiency higher than 96% from 1.1 to 2.5 micron. We create a pipeline that extracts monochromatic closure phases from the central component as well as multiwavelength closure phases from the holographic component. We test the performance of the HAM mask in the laboratory and on-sky. The holographic component yields 26 closure phases with spectral resolutions between R$\sim$6.5 and R$\sim$15. On April 19, 2019, we observed the binary star HDS 1507 in the Hbb filter ($λ_0 = 1638$ nm and $Δλ= 330$ nm) and retrieved a constant separation of 120.9 $\pm 0.5$ mas for the independent wavelength bins, which is in excellent agreement with literature values. For both the laboratory measurements and the observations of unresolved reference stars, we recorded nonzero closure phases -- a potential source of systematic error that we traced to polarization leakage of the HAM optic. We propose a future upgrade that improves the performance, reducing this effect to an acceptable level. Holographic aperture masking is a simple upgrade of SAM with increased throughput and a new capability of simultaneous low-resolution spectroscopy that provides new differential observables.

astro-ph.IM↗

arXiv2020

Update on the Preliminary Design of SCALES: the Santa Cruz Array of Lenslets for Exoplanet Spectroscopy

SCALES (Santa Cruz Array of Lenslets for Exoplanet Spectroscopy) is a 2-5 micron high-contrast lenslet integral-field spectrograph (IFS) driven by exoplanet characterization science requirements and will operate at W. M. Keck Observatory. Its fully cryogenic optical train uses a custom silicon lenslet array, selectable coronagraphs, and dispersive prisms to carry out integral field spectroscopy over a 2.2 arcsec field of view at Keck with low ($<300$) spectral resolution. A small, dedicated section of the lenslet array feeds an image slicer module that allows for medium spectral resolution ($5000-10 000$), which has not been available at the diffraction limit with a coronagraphic instrument before. Unlike previous IFS exoplanet instruments, SCALES is capable of characterizing cold exoplanet and brown dwarf atmospheres ($<600$ K) at bandpasses where these bodies emit most of their radiation while capturing relevant molecular spectral features.

astro-ph.IM↗

arXiv2020

ELT Imaging of MWC 297 from the 23-m LBTI: Complex Disk Structure and a Companion Candidate

Herbig Ae/Be stars represent the early outcomes of star formation and the initial stages of planet formation at intermediate stellar masses. Understanding both of these processes requires detailed characterization of their disk structures and companion frequencies. We present new 3.7 micron imaging of the Herbig Be star MWC 297 from non-redundant masking observations on the phase-controlled, 23-m Large Binocular Telescope Interferometer. The images reveal complex disk structure on the scales of several au, as well as a companion candidate. We discuss physical interpretations for these features, and demonstrate that the imaging results are independent of choices such as priors, regularization hyperparameters, and error bar estimates. With an angular resolution of ~17 mas, these data provide the first robust ELT-resolution view of a distant young star.

astro-ph.SR↗

arXiv2020

On the diversity of asymmetries in gapped protoplanetary disks

Protoplanetary disks with large inner dust cavities are thought to host massive planetary or substellar companions. These disks show asymmetries and rings in the millimeter continuum, caused by dust trapping in pressure bumps, and potentially vortices or horseshoes. The origin of the asymmetries and their diversity remains unclear. We present a comprehensive study of 16 disks for which the gas surface density profile has been constrained by CO isotopologue data. We compare the azimuthal extents of the dust continuum profiles with the local gas surface density in each disk, and find that the asymmetries correspond to higher Stokes numbers or low gas surface density. We discuss which asymmetric structures can be explained by a horseshoe, a vortex or spiral density waves. Second, we reassess the gas gap radii from the $^{13}$CO maps, which are about a factor 2 smaller than the dust ring radii, suggesting that companions in these disks are in the brown dwarf mass regime ($\sim 15-50 M_{\rm Jup}$) or in the Super-Jovian mass regime ($\sim 3-15 M_{\rm Jup}$) on eccentric orbits. This is consistent with the estimates from contrast curves on companion mass limits. These curves rule out (sub)stellar companions ($q>$0.05) for the majority of the sample at the gap location, but it remains possible at even smaller radii. Third, we find that spiral arms in scattered light images are primarily detected around high luminosity stars with disks with wide gaps, which can be understood by the dependence of the spiral arm pitch angle on disk temperature and companion mass.

astro-ph.EP↗

arXiv2019

New Spatially Resolved Imaging of the SR 21 Transition Disk and Constraints on the Small-Grain Disk Geometry

We present new 0.6 - 4 $μ$m imaging of the SR 21 transition disk from Keck/NIRC2 and Magellan/MagAO. The protoplanetary disk around SR 21 has a large (~ 30 - 40 AU) clearing first inferred from its spectral energy distribution and later detected in sub-millimeter imaging. Both the gas and small dust grains are known to have a different morphology, with an inner truncation in CO at ~7 AU, and micron-sized dust detected within the millimeter clearing. Previous near-infrared imaging could not distinguish between an inner dust disk with a truncation at ~7 AU or one that extended to the sublimation radius. The imaging data presented here require an inner dust disk radius of a few AU, and complex structure such as a warp or spiral. We present a parametric warped disk model that can reproduce the observations. Reconciling the images with the spectral energy distribution gathered from the literature suggests grain growth to ~2 - 5 $μ$m within the sub-millimeter clearing. The complex disk structure and possible grain growth can be connected to dynamical shaping by a giant-planet mass companion, a scenario supported by previous observational and theoretical studies.

astro-ph.SR↗

arXiv2019

The Demographics and Atmospheres of Giant Planets with the ELTs

Gas giants are the most readily detectable exoplanets but fundamental questions about their system architectures, formation, migration, and atmospheres have been unanswerable with the current generation of ground- and space-based facilities. The dominant techniques to detect and characterize giant planets $-$ radial velocities, transits, direct imaging, microlensing, and astrometry $-$ are each isolated to a limited range of planet masses, separations, ages, and temperatures. These windows into the arrangement and physical properties of giant planets have spawned new questions about the timescale and location of their assembly; the distributions of planet mass and orbital separation at young and old ages; the composition and structure of their atmospheres; and their orbital and rotational angular momentum architectures. The ELTs will address these questions by building bridges between these islands of mass, orbital distance, and age. The angular resolution, collecting area, all-sky coverage, and novel instrumentation suite of these facilities are needed to provide a complete map of the orbits and atmospheric evolution of gas giant planets (0.3$-$10 $M_\mathrm{Jup}$) across space (0.1$-$100 AU) and time (1 Myr to 10 Gyr). This white paper highlights the scientific potential of the GMT and TMT to address these outstanding questions, with a particular focus on the role of direct imaging and spectroscopy of large samples of giant planets that will soon be made available with $Gaia$.

astro-ph.EP↗

arXiv2019

Imaging Giant Protoplanets with the ELTs

We have now accumulated a wealth of observations of the planet-formation environment and of mature planetary systems. These data allow us to test and refine theories of gas-giant planet formation by placing constraints on the conditions and timescale of this process. Yet a number of fundamental questions remain unanswered about how protoplanets accumulate material, their photospheric properties and compositions, and how they interact with protoplanetary disks. While we have begun to detect protoplanet candidates during the last several years, we are presently only sensitive to the widest separation, highest mass / accretion rate cases. Current observing facilities lack the angular resolution and inner working angle to probe the few-AU orbital separations where giant planet formation is thought to be most efficient. They also lack the contrast to detect accretion rates that would form lower mass gas giants and ice giants. Instruments and telescopes coming online over the next decade will provide high contrast in the inner giant-planet-forming regions around young stars, allowing us to build a protoplanet census and to characterize planet formation in detail for the first time.

astro-ph.EP↗

arXiv2019

Protoplanetary Disk Science Enabled by Extremely Large Telescopes

The processes that transform gas and dust in circumstellar disks into diverse exoplanets remain poorly understood. One key pathway is to study exoplanets as they form in their young ($\sim$few~Myr) natal disks. Extremely Large Telescopes (ELTs) such as GMT, TMT, or ELT, can be used to establish the initial chemical conditions, locations, and timescales of planet formation, via (1)~measuring the physical and chemical conditions in protoplanetary disks using infrared spectroscopy and (2)~studying planet-disk interactions using imaging and spectro-astrometry. Our current knowledge is based on a limited sample of targets, representing the brightest, most extreme cases, and thus almost certainly represents an incomplete understanding. ELTs will play a transformational role in this arena, thanks to the high spatial and spectral resolution data they will deliver. We recommend a key science program to conduct a volume-limited survey of high-resolution spectroscopy and high-contrast imaging of the nearest protoplanetary disks that would result in an unbiased, holistic picture of planet formation as it occurs.

astro-ph.EP↗

arXiv2019

Comparing Non-Redundant Masking and Filled-Aperture Kernel Phase for Exoplanet Detection and Characterization

The limitations of adaptive optics and coronagraph performance make exoplanet detection close to λ/D extremely difficult with conventional imaging methods. The technique of non-redundant masking (NRM), which turns a filled aperture into an interferometric array, has pushed the planet detection parameter space to within λ/D. For high Strehl, the related filled-aperture kernel phase technique can achieve resolution comparable to NRM, without the associated dramatic decrease in throughput. We present non-redundant masking and kernel phase contrast curves generated for ground- and space-based instruments. We use both real and simulated observations to assess the performance of each technique, and discuss their capabilities for different exoplanet science goals such as broadband detection and spectral characterization.

astro-ph.IM↗