arXiv subjects

Stephane Roux

Publications and source records attributed to Stephane Roux.

At least 19 recordsLinked to original sources

arXiv2013

Efficient binary tomographic reconstruction

Tomographic reconstruction of a binary image from few projections is considered. A novel {\em heuristic} algorithm is proposed, the central element of which is a nonlinear transformation $ψ(p)=\log(p/(1-p))$ of the probability $p$ that a pixel of the sought image be 1-valued. It consists of backprojections based on $ψ(p)$ and iterative corrections. Application of this algorithm to a series of artificial test cases leads to exact binary reconstructions, (i.e recovery of the binary image for each single pixel) from the knowledge of projection data over a few directions. Images up to $10^6$ pixels are reconstructed in a few seconds. A series of test cases is performed for comparison with previous methods, showing a better efficiency and reduced computation times.

physics.class-ph↗

arXiv2012

A phenomenological theory of Eulerian and Lagrangian velocity fluctuations in turbulent flows

A phenomenological theory of the fluctuations of velocity occurring in a fully developed homogeneous and isotropic turbulent flow is presented. The focus is made on the fluctuations of the spatial (Eulerian) and temporal (Lagrangian) velocity increments. The universal nature of the intermittency phenomenon as observed in experimental measurements and numerical simulations is shown to be fully taken into account by the multiscale picture proposed by the multifractal formalism, and its extensions to the dissipative scales and to the Lagrangian framework. The article is devoted to the presentation of these arguments and to their comparisons against empirical data. In particular, explicit predictions of the statistics, such as probability density functions and high order moments, of the velocity gradients and acceleration are derived. In the Eulerian framework, at a given Reynolds number, they are shown to depend on a single parameter function called the singularity spectrum and to a universal constant governing the transition between the inertial and dissipative ranges. The Lagrangian singularity spectrum compares well with its Eulerian counterpart by a transformation based on incompressibility, homogeneity and isotropy and the remaining constant is shown to be difficult to estimate on empirical data. It is finally underlined the limitations of the increment to quantify accurately the singular nature of Lagrangian velocity. This is confirmed using higher order increments unbiased by the presence of linear trends, as they are observed on velocity along a trajectory.

physics.flu-dyn↗

arXiv2007

Three dimensional image correlation from X-Ray computed tomography of solid foam

A new methodology is proposed to estimate 3D displacement fields from pairs of images obtained from X-Ray Computed Micro Tomography (XCMT). Contrary to local approaches, a global approach is followed herein that evaluates {\em continuous} displacement fields. Although any displacement basis could be considered, the procedure is specialized to finite element shape functions. The method is illustrated with the analysis of a compression test on a polypropylene solid foam (independently studied in a companion paper). A good stability of the measured displacement field is obtained for cubic element sizes ranging from 16 voxels to 6 voxels.

physics.class-ph↗

arXiv2007

Walls Inhibit Chaotic Mixing

We report on experiments of chaotic mixing in a closed vessel, in which a highly viscous fluid is stirred by a moving rod. We analyze quantitatively how the concentration field of a low-diffusivity dye relaxes towards homogeneity, and we observe a slow algebraic decay of the inhomogeneity, at odds with the exponential decay predicted by most previous studies. Visual observations reveal the dominant role of the vessel wall, which strongly influences the concentration field in the entire domain and causes the anomalous scaling. A simplified 1D model supports our experimental results. Quantitative analysis of the concentration pattern leads to scalings for the distributions and the variance of the concentration field consistent with experimental and numerical results.

cond-mat.stat-mech↗

arXiv2004

Light scattering from cold rolled aluminum surfaces

We present experimental light scattering measurements from aluminum surfaces obtained by cold rolling. We show that our results are consistent with a scale invariant description of the roughness of these surfaces. The roughness parameters that we obtain from the light scattering experiment are consistent with those obtained from Atomic Force Microscopy measurements.

cond-mat.other↗

arXiv2004

Material independent crack arrest statistics

The propagation of (planar) cracks in a heterogeneous brittle material characterized by a random field of toughness is considered, taking into account explicitly the effect of the crack front roughness on the local stress intensity factor. In the so-called strong-pinning regime, the onset of crack propagation appears to map onto a second-order phase transition characterized by universal critical exponents which are independent of the local characteristics of the medium. Propagation over large distances can be described by using a simple one-dimensional description, with a correlation length and an effective macroscopic toughness distribution that scale in a non-trivial fashion with the crack front length. As an application of the above concepts, the arrest of indentation cracks is addressed, and the analytical expression for the statistical distribution of the crack radius at arrest is derived. The analysis of indentation crack radii on alumina is shown to obey the predicted algebraic expression for the radius distribution and its dependence on the indentation load.

cond-mat.other↗

arXiv2004

Effective toughness of heterogeneous brittle materials

A heterogeneous brittle material characterized by a random field of local toughness Kc(x) can be represented by an equivalent homogeneous medium of toughness, Keff. Homogenization refers to a process of estimating Keff from the local field Kc(x). An approach based on a perturbative expansion of the stress intensity factor along a rough crack front shows the occurrence of different regimes depending on the correlation length of the local toughness field in the direction of crack propagation. A `"weak pinning" regime takes place for long correlation lengths, where the effective toughness is the average of the local toughness. For shorter correlation lengths, a transition to "strong pinning" occurs leading to a much higher effective toughness, and characterized by a propagation regime consisting in jumps between pinning configurations.

cond-mat.other↗

arXiv2004

Electromagnetic wave scattering from conducting self-affine surfaces : An analytic and numerical study

We derive an analytical expression for the scattering of a scalar wave from a perfectly conducting self-affine one dimensional surface in the framework of the Kirchhoff approximation. We show that most of the results can be recovered via a scaling analysis. We identify the typical slope taken over one wavelength as the relevant parameter controlling the scattering process. We compare our predictions with direct numerical simulations performed on surfaces of varying roughness parameters and confirm the broad range of applicability of our description up to very large roughness. Finally we check that a non zero electrical resistivity provided small does not invalidate our results.

cond-mat.other↗

arXiv2004

Conformal Mapping on Rough Boundaries II: Applications to bi-harmonic problems

We use a conformal mapping method introduced in a companion paper to study the properties of bi-harmonic fields in the vicinity of rough boundaries. We focus our analysis on two different situations where such bi-harmonic problems are encountered: a Stokes flow near a rough wall and the stress distribution on the rough interface of a material in uni-axial tension. We perform a complete numerical solution of these two-dimensional problems for any univalued rough surfaces. We present results for sinusoidal and self-affine surface whose slope can locally reach 2.5. Beyond the numerical solution we present perturbative solutions of these problems. We show in particular that at first order in roughness amplitude, the surface stress of a material in uni-axial tension can be directly obtained from the Hilbert transform of the local slope. In case of self-affine surfaces, we show that the stress distribution presents, for large stresses, a power law tail whose exponent continuously depends on the roughness amplitude.

cond-mat.other↗

arXiv2004

Conformal Mapping on Rough Boundaries I: Applications to harmonic problems

The aim of this study is to analyze the properties of harmonic fields in the vicinity of rough boundaries where either a constant potential or a zero flux is imposed, while a constant field is prescribed at an infinite distance from this boundary. We introduce a conformal mapping technique that is tailored to this problem in two dimensions. An efficient algorithm is introduced to compute the conformal map for arbitrarily chosen boundaries. Harmonic fields can then simply be read from the conformal map. We discuss applications to "equivalent" smooth interfaces. We study the correlations between the topography and the field at the surface. Finally we apply the conformal map to the computation of inhomogeneous harmonic fields such as the derivation of Green function for localized flux on the surface of a rough boundary.

cond-mat.other↗

arXiv2004

Large scale numerical simulations of "ultrametric" long-range depinning

The depinning of an elastic line interacting with a quenched disorder is studied for long range interactions, applicable to crack propagation or wetting. An ultrametric distance is introduced instead of the Euclidean distance, allowing for a drastic reduction of the numerical complexity of the problem. Based on large scale simulations, two to three orders of magnitude larger than previously considered, we obtain a very precise determination of critical exponents which are shown to be indistinguishable from their Euclidean metric counterparts. Moreover the scaling functions are shown to be unchanged. The choice of an ultrametric distance thus does not affect the universality class of the depinning transition and opens the way to an analytic real space renormalization group approach.

cond-mat.other↗

arXiv2003

Universal depinning force fluctuations of an elastic line: Application to finite temperature behavior

The depinning of an elastic line in a random medium is studied via an extremal model. The latter gives access to the instantaneous depinning force for each successive conformation of the line. Based on conditional statistics the universal and non-universal parts of the depinning force distribution can be obtained. In particular the singular behavior close to a (macroscopic) critical threshold is obtained as a function of the roughness exponent of the front. We show moreover that the advance of the front is controlled by a very tenuous set of subcritical sites. Extension of the extremal model to a finite temperature is proposed, the scaling properties of which can be discussed based on the statistics of depinning force at zero temperature.

cond-mat↗

arXiv2003

Dual Multifractal Spectra

The multifractal formalism characterizes the scaling properties of a physical density rho as a function of the distance L. To each singularity alpha of the field is attributed a fractal dimension for its support f(alpha). An alternative representation has been proposed by Jensen considering the distribution of distances associated to a fixed mass. Computing these spectra for a multifractal Cantor set, it is shown that these two approaches are dual to each other, and that both spectra as well as the moment scaling exponents are simply related. We apply the same inversion formalism to exponents obtained for turbulent statistics in the GOY shell model and observe that the same duality relation holds here.

nlin.CD↗

arXiv2002

Shearing of loose granular materials: A statistical mesoscopic model

A two-dimensional lattice model for the formation and evolution of shear bands in granular media is proposed. Each lattice site is assigned a random variable which reflects the local density. At every time step, the strain is localized along a single shear-band which is a spanning path on the lattice chosen through an extremum condition. The dynamics consists of randomly changing the `density' of the sites only along the shear band, and then repeating the procedure of locating the extremal path and changing it. Starting from an initially uncorrelated density field, it is found that this dynamics leads to a slow compaction along with a non-trivial patterning of the system, with high density regions forming which shelter long-lived low-density valleys. Further, as a result of these large density fluctuations, the shear band which was initially equally likely to be found anywhere on the lattice, gets progressively trapped for longer and longer periods of time. This state is however meta-stable, and the system continues to evolve slowly in a manner reminiscent of glassy dynamics. Several quantities have been studied numerically which support this picture and elucidate the unusual system-size effects at play.

cond-mat.stat-mech↗

arXiv2002

Slow relaxation due to optimization and restructuring: Solution on a hierarchical lattice

Motivated by the large strain shear of loose granular materials we introduced a model which consists of consecutive optimization and restructuring steps leading to a self organization of a density field. The extensive connections to other models of statistical phyics are discussed. We investigate our model on a hierarchical lattice which allows an exact asymptotic renormalization treatment. A surprisingly close analogy is observed between the simulation results on the regular and the hierarchical lattices. The dynamics is characterized by the breakdown of ergodicity, by unusual system size effects in the development of the average density as well as by the age distribution, the latter showing multifractal properties.

cond-mat.stat-mech↗

arXiv2002

An extremal model for amorphous media plasticity

An extremal model for the plasticity of amorphous materials is studied in a simple two-dimensional anti-plane geometry. The steady-state is analyzed through numerical simulations. Long-range spatial and temporal correlations in local slip events are shown to develop, leading to non-trivial and highly anisotropic scaling laws. In particular, the plastic strain is shown to statistically concentrate over a region which tends to align perpendicular to the displacement gradient. By construction, the model can be seen as giving rise to a depinning transition, the threshold of which (i.e. the macroscopic yield stress) also reveal scaling properties reflecting the localization of the activity.

cond-mat.dis-nn↗

arXiv2002

Front propagation in random media: From extremal to activated dynamics

Front propagation in a random environment is studied close to the depinning threshold. At zero temperature we show that the depinning force distribution exhibits a universal behavior. This property is used to estimate the velocity of the front at very low temperature. We obtain a Arrhenius behavior with a prefactor depending on the temperature as a power law. These results are supported by numerical simulations.

cond-mat.dis-nn↗

arXiv2000

Self-Quenched Dynamics

We introduce a model for the slow relaxation of an energy landscape caused by its local interaction with a random walker whose motion is dictated by the landscape itself. By choosing relevant measures of time and potential this self-quenched dynamics can be mapped on to the ``True'' Self-Avoiding Walk model. This correspondence reveals that the average distance of the walker at time $t$ from its starting point is $R(t)\sim\log(t)^\gamma$, where $\gamma=2/3$ for one dimension and 1/2 for all higher dimensions. Furthermore, the evolution of the landscape is similar to that in growth models with extremal dynamics.

cond-mat.stat-mech↗