arXiv subjects

Su Kong Chong

Publications and source records attributed to Su Kong Chong.

17 recordsLinked to original sources

arXiv2024

Giant Hall Switching by Surface-State-Mediated Spin-Orbit Torque in a Hard Ferromagnetic Topological Insulator

Topological insulators (TI) and magnetic topological insulators (MTI) can apply highly efficient spin-orbit torque (SOT) and manipulate the magnetization with their unique topological surface states with ultra-high efficiency. Here, we demonstrate efficient SOT switching of a hard MTI, V-doped (Bi,Sb)2Te3 (VBST) with a large coercive field that can prevent the influence of an external magnetic field. A giant switched anomalous Hall resistance of 9.2 $kΩ$ is realized, among the largest of all SOT systems, which makes the Hall channel a good readout and eliminates the need to fabricate complicated magnetic tunnel junction (MTJ) structures. The SOT switching current density can be reduced to $2.8\times10^5 A/cm^2$. Moreover, as the Fermi level is moved away from the Dirac point by both gate and composition tuning, VBST exhibits a transition from edge-state-mediated to surface-state-mediated transport, thus enhancing the SOT effective field to $1.56\pm 0.12 T/ (10^6 A/cm^2)$ and the interfacial charge-to-spin conversion efficiency to $3.9\pm 0.3 nm^{-1}$. The findings establish VBST as an extraordinary candidate for energy-efficient magnetic memory devices.

cond-mat.mes-hall↗

arXiv2024

Ultrafast dynamics of wavelength-sensitive magnons in unconventional compensated semiconducting antiferromagnet

Antiferromagnet is a promising candidate for the next generation spintronic devices, benefiting from its ultrafast dynamics and spontaneous zero stray field. However, the understanding of their ultrafast spin behaviors is lacking due to the challenges of controlling/detecting the quenched net magnetization. Unconventional compensated semiconducting antiferromagnets present strong time-reversal symmetry breaking, spin splitting in the momentum space, and suitable bandgap for optical control/detection. Thus, it is a powerful platform to uncover the ultrafast dynamics of antiferromagnets. Here, we show an exotic wavelength-dependent spin dynamic in the unconventional compensated semiconducting antiferromagnet α-MnTe via time-resolved quadratic magneto-optical Kerr effect measurement, where the probing photon energy of the laser matches its bandgap. This direct excitation and detection of distinct magnon modes reveal varying spin behaviors and time characteristics in a broad temperature range. It originates from the spins triggered at different bands of electronic structures and is depicted in an energy transfer model among electrons, phonons, and magnons. Our study of exotic optical properties in this unconventional semiconducting antiferromagnet fulfills the missing information of spin evolution in the time domain and paves the way for its utilization in ultrafast spintronic devices.

physics.app-ph↗

arXiv2024

Reentrant quantum anomalous Hall effect in molecular beam epitaxy-grown MnBi2Te4 thin films

In this study, we investigate intrinsic magnetic topological insulator MnBi2Te4 thin films grown by molecular beam epitaxy. We observe a reentrant quantum anomalous Hall effect when the Fermi energy enters the valance band and magnetic field equals zero, indicating the emergence of the Chern Anderson insulator state. The discovery opens a new avenue for realizing the QAH effect and underscores the fundamental role of both Berry curvature and Anderson localization.

cond-mat.mes-hall↗

arXiv2024

Tunning the number of chiral edge channels in a fixed quantum anomalous Hall system

Quantum anomalous Hall (QAH) insulators exhibit chiral edge channels characterized by vanishing longitudinal conductance and quantized Hall conductance of Ce2/h, wherein the Chern number C is an integer equal to the number of the parallel chiral edge channels. These chiral edge channels conduct dissipationless transport in QAH insulators, making them pivotal for applications in low-consumption electronics and topological quantum computing. While the QAH effect with multiple chiral edge channels (i.e., C >1) has been demonstrated in multilayers consisting of magnetic topological insulators and normal insulators, the channel number remains fixed for a given sample. Here, we unveil the tunability of the number of chiral edge channels within a single QAH insulator device. By tuning the magnetization of individual layers within the multilayer system, Chern insulating states with different Chern numbers are unveiled. The tunable Chern number was corroborated by our theoretical calculations. Furthermore, we conducted layer-dependent calculations to elucidate the contribution of the Chern number from different layers in the multilayer. Our findings demonstrate an extra degree of freedom in manipulating the chiral edge channels in QAH insulators. This newfound tunability offers extra dimension for the implementation of the QAH-based multi-channel dissipationless transport.

cond-mat.mes-hall↗

arXiv2023

Pressure tunable quantum anomalous Hall states in a topological antiferromagnet

Mechanical modulation of the lattice parameter can modify the electronic structure and manipulate the magnetic coupling of a material without introducing impurities. Inspired by success in pressure-controlled magnetism, we investigate the effect of hydrostatic pressure on quantized Chern states in the antiferromagnetic topological insulator MnBi2Te4, using transport as a probe. We show that pressure can enhance the robustness of quantum anomalous Hall (QAH) phases that are otherwise delicate in 7SL MnBi2Te4 and in the spin-flop (SF) state of 8SL MnBi2Te4. We explain our findings using a coupled Dirac cone model of MnBi2Te4, which identifies stronger hybridization between van der Waals layers as the driver of topological states. We further demonstrate that moderate pressures readily available in laboratory systems can provide reversible control of magnetic and topological phases. Our results reveal a strong connection between the mechanical engineering of band topology and magnetism.

cond-mat.mes-hall↗

arXiv2023

Implementing Microwave Impedance Microscopy in a Dilution Refrigerator

We report the implementation of a dilution-refrigerator-based scanning microwave impedance microscope (MIM) with a base temperature of ~ 100 mK. The vibration noise of our apparatus with tuning-fork feedback control is as low as 1 nm. Using this setup, we have demonstrated the imaging of quantum anomalous Hall states in magnetically (Cr and V) doped (Bi, Sb)2Te3 thin films grown on mica substrates. Both the conductive edge modes and topological phase transitions near coercive fields of Cr-doped and V-doped layers are visualized in the field-dependent results. Our work establishes the experimental platform for investigating nanoscale quantum phenomena under ultralow temperatures.

cond-mat.mes-hall↗

arXiv2023

Structural tuning magnetism and topology in a magnetic topological insulator

To date, the most widely-studied quantum anomalous Hall insulator (QAHI) platform is achieved by dilute doping of magnetic ions into thin films of the alloyed tetradymite topological insulator (TI) (Bi$_{1-x}$Sb$_x$)$_2$Te$_3$ (BST). In these films, long-range magnetic ordering of the transition metal substituants opens an exchange gap $Δ$ in the topological surface states, stabilizing spin-polarized, dissipationless edge channels with a nonzero Chern number $\mathcal{C}$. The long-range ordering of the spatially separated magnetic ions is itself mediated by electronic states in the host TI, leading to a sophisticated feedback between magnetic and electronic properties. Here we present a study of the electronic and magnetic response of a BST-based QAHI system to structural tuning via hydrostatic pressure. We identify a systematic closure of the topological gap under compressive strain accompanied by a simultaneous enhancement in the magnetic ordering strength. Combining these experimental results with first-principle calculations we identify structural deformation as a strong tuning parameter to traverse a rich topological phase space and modify magnetism in the magnetically doped BST system.

cond-mat.mes-hall↗

arXiv2022

Anomalous Landau quantization in intrinsic magnetic topological insulators

The intrinsic magnetic topological insulators, Mn(Bi1-xSbx)2Te4, in their spin-aligned strong field configuration have been identified as a Weyl semimetal with single pair of Weyl nodes1-4. A direct consequence of the Weyl state is the layer-dependent Chern number (C) in thin film quantization. Previous reports in MnBi2Te4 thin films revealed the higher C states in the spin alignment by either increasing the film thickness5 or controlling chemical potential into electron doping6-8. A clear picture of the higher Chern states is still missing as the situation is complicated by the emerging of surface band Landau levels (LLs) in magnetic field. Here, we report a tunable layer-dependent of C= 1 state with the Sb substitutions by performing a detailed analysis of the quantization states in Mn(Bi1-xSbx)2Te4 dualgated devices, consistent with the calculations of the bulk Weyl point separations in the compounds. The observed Hall quantization plateaus for our thicker Mn(Bi1-xSbx)2Te4 films under strong magnetic fields can be interpreted from a theory of surface and bulk spin-polarized Landau levels spectrum in thin film magnetic topological insulators. Our results demonstrate that Mn(Bi1-xSbx)2Te4 thin films provide a highly tunable platform for probing the physics of the anomalous Landau quantization that is strongly sensitive to magnetic order.

cond-mat.mes-hall↗

arXiv2022

Distinguishing two-component anomalous Hall effect from topological Hall effect

In transport, the topological Hall effect (THE) presents itself as non-monotonic features (or humps and dips) in the Hall signal and is widely interpreted as a sign of chiral spin textures, like magnetic skyrmions. However, when anomalous Hall effect (AHE) is also present, the co-existence of two AHEs could give rise to similar artifacts, making it difficult to distinguish between genuine THE with AHE and two-component AHE. Here we confirm genuine THE with AHE by means of transport and magneto-optical Kerr effect (MOKE) microscopy, in which magnetic skyrmions are directly observed, and find that genuine THE occurs in the transition region of the AHE. In sharp contrast, the artifact "THE", or two-component AHE occurs well beyond the saturation of the "AHE component" (under the false assumption of THE+AHE). Furthermore, we distinguish artifact "THE" from genuine THE by three methods: 1. Minor loops, 2. Temperature dependence, 3. Gate dependence. Minor loops of genuine THE with AHE are always within the full loop, while minor loops of the artifact "THE" may reveal a single loop that cannot fit into the "AHE component". Besides, the temperature or gate dependence of the artifact "THE" may also be accompanied by a polarity change of the "AHE component", as the non-monotonic features vanish, while the temperature dependence of genuine THE with AHE reveals no such change. Our work may help future researchers to exercise cautions and use these methods to examine carefully in order to ascertain genuine THE.

cond-mat.mtrl-sci↗

arXiv2022

Unidirectional Spin Hall Magnetoresistance in Antiferromagnetic Heterostructures

Unidirectional spin Hall magnetoresistance (USMR) has been widely reported in the heavy metal / ferromagnet (HM/FM) bilayer systems. We observe the USMR in the Pt/α-Fe2O3 bilayers where the α-Fe2O3 is an antiferromagnetic (AFM) insulator. Systematic field and temperature dependent measurements confirm the magnonic origin of the USMR. The appearance of AFM-USMR is driven by the imbalance of creation and annihilation of AFM magnons by spin orbit torque due to thermal random field. However, unlike its ferromagnetic counterpart, theoretical modeling reveals that the USMR in Pt/α-Fe2O3 is determined by the antiferromagtic magnon number, and with a non-monotonic field dependence. Our findings extend the generality of the USMR which pave the ways for the highly sensitive detection of AF spin state.

cond-mat.mes-hall↗

arXiv2022

Nanomechanical Characterization of an Antiferromagnetic Topological Insulator

The antiferromagnetic topological insulator MnBi2Te4 (MBT) exhibits an ideal platform to study exotic topological phenomena and magnetic properties. The transport signatures of magnetic phase transitions in the MBT family materials have been well-studied. However, their mechanical properties and magneto-mechanical coupling have not been well-explored. We use nanoelectromechanical systems to study the intrinsic magnetism in MBT thin flakes via their magnetostrictive coupling. We investigate mechanical resonance signatures of magnetic phase transitions from antiferromagnetic (AFM) to canted antiferromagnetic (cAFM) to ferromagnetic (FM) phases versus magnetic field at different temperatures. The spin-flop transitions in MBT are revealed by frequency shifts of mechanical resonance. With temperatures going above TN, the transitions disappear in the resonance frequency map, consistent with transport measurements. We use a magnetostrictive model to correlate the frequency shifts with the spin-canting states. Our work demonstrates a technique to study magnetic phase transitions, magnetization and magnetoelastic properties of the magnetic topological insulator.

cond-mat.mes-hall↗

arXiv2021

Mesoscopic Transport of Quantum Anomalous Hall Effect in Sub-Micron Size Regime

The quantum anomalous Hall (QAH) effect has been demonstrated in two-dimensional topological insulator systems incorporated with ferromagnetism. However, a comprehensive understanding of mesoscopic transport in sub-micron QAH devices has yet been established. Here we fabricated miniaturized QAH devices with channel widths down to 600 nm, where the QAH features are still preserved. A back-scattering channel is formed in narrow QAH devices through percolative hopping between 2D compressible puddles. Large resistance fluctuations are observed in narrow devices near the coercive field, which is associated with collective interference between intersecting paths along domain walls when the device geometry is smaller than the phase coherence length $L_ϕ$. Through measurement of size-dependent breakdown current, we confirmed that the chiral edge states are confined at the physical boundary with its width on the order of Fermi wavelength.

cond-mat.mes-hall↗

arXiv2020

Topological Phase Transitions in a Hybridized Three-Dimensional Topological Insulator

As the thickness of a three-dimensional (3D) topological insulator (TI) becomes comparable to the penetration depth of the surface states, quantum tunneling between surfaces turns their gapless Dirac electronic structure into a gapped surface state. Analytical formulation suggests that the hybridization gap scales exponentially with decrease in number of layers while the system oscillates between topologically trivial and non-trivial insulators. This work explores the transport properties of a 3D TI in the inter-surface hybridization regime. By experimentally probing the hybridization gap as a function of BiSbTeSe2 thickness using three different methods, we map the crossover from the 3D to 2D state. In the 2D topological state, we observe a finite longitudinal conductance at ~2e2/h when the Fermi level is aligned within the surface gap, indicating a quantum spin Hall (QSH) state. Additionally, we study the response of trivial and non-trivial hybridization gapped states modulated by external out-of-plane magnetic and electric fields. Our revelations of surface gap-closing and/or reopening features are strongly indicative of topological phase transitions (TPTs) in the hybridization gap regime, realizing magnetic/electric field switching between band insulating and QSH states with immense potential for practical applications.

cond-mat.mes-hall↗

arXiv2020

Landau Levels of Topologically-Protected Surface States Probed by Dual-Gated Quantum Capacitance

Spectroscopy of discrete Landau levels (LLs) in bulk-insulating three-dimensional topological insulators (3D TIs) in perpendicular magnetic field characterizes the Dirac nature of their surface states. Despite a number of studies demonstrating the quantum Hall effect (QHE) of topological surface states, quantitative evaluation of the LL energies, which serve as fundamental electronic quantities for study of the quantum states, is still limited. In this work, we explore the density of states of LLs by measuring quantum capacitance (CQ) in a truly bulk insulating 3D TI via a van der Waals heterostructure configuration. By applying dual gate voltages, we access the individual surface states' LLs and extract their chemical potentials to quantify the LL spacings of each surface. We evaluate the LLs' energies at two distinguished QH states, namely dissipationless (ν= +/-1) and dissipative (ν= 0) states in the 3D TI.

cond-mat.mes-hall↗

arXiv2020

Tunable Coupling between Surface States of a Three-Dimensional Topological Insulator in the Quantum Hall Regime

The paired top and bottom Dirac surface states, each associated with a half-integer quantum Hall (QH) effect, and a resultant integer QH conductance (νe2/h), are hallmarks of a three-dimensional (3D) topological insulator (TI). In a dual-gated system, chemical potentials of the paired surface states are controlled through separate gates. In this work, we establish tunable capacitive coupling between the surface states of a bulk-insulating TI BiSbTeSe2 and study the effect of this coupling on QH plateaus and Landau level (LL) fan diagram via dual-gate control. We observe non-linear QH transitions at low charge density in strongly-coupled surface states, which are related to the charge-density-dependent coupling strength. A splitting of the N= 0 LL at the charge neutrality point for thin devices (but thicker than the 2D limit) indicates inter-surface hybridization possibly beyond single-particle effects. By applying capacitor charging models to the surface states, we explore their chemical potential as a function of charge density and extract the fundamental electronic quantity of LL energy gaps from dual-gated transport and capacitance measurements. These studies are essential for the realization of exotic quantum effects such as topological exciton condensation.

cond-mat.mes-hall↗

arXiv2018

Topological Insulator-Based van der Waals Heterostructures for Effective Control of Massless and Massive Dirac Fermions

Three dimensional (3D) topological insulators (TIs) are an important class of materials with applications in electronics, spintronics and quantum computing. With the recent development of truly bulk insulating 3D TIs, it has become possible to realize surface dominated phenomena in electrical transport measurements e.g. the quantum Hall (QH) effect of massless Dirac fermions in topological surface states (TSS). However, to realize more advanced devices and phenomena, there is a need for a platform to tune the TSS or modify them e.g. gap them by proximity with magnetic insulators, in a clean manner. Here we introduce van der Waals (vdW) heterostructures in the form of topological insulator/insulator/graphite to effectively control chemical potential of the TSS. Two types of gate dielectrics, normal insulator hexagonal boron nitride (hBN) and ferromagnetic insulator Cr2Ge2Te6 (CGT) are utilized to tune charge density of TSS in the quaternary TI BiSbTeSe2. hBN/graphite gating in the QH regime shows improved quantization of TSS by suppression of magnetoconductivity of massless Dirac fermions. CGT/graphite gating of massive Dirac fermions in the QH regime yields half-quantized Hall conductance steps and a measure of the Dirac gap. Our work shows the promise of the vdW platform in creating advanced high-quality TI-based devices.

cond-mat.mes-hall↗

arXiv2018

Enhancement in surface mobility and quantum transport of Bi_(2-x)Sb_(x)Te_(3-y)Se_(y) topological insulator by controlling the crystal growth conditions

Despite numerous studies on three-dimensional topological insulators (3D TIs), the controlled growth of high quality (bulk-insulating and high mobility) TIs remains a challenging subject. This study investigates the role of growth methods on the synthesis of single crystal stoichiometric BiSbTeSe2 (BSTS). Three types of BSTS samples are prepared using three different methods, namely melting growth (MG), Bridgman growth (BG) and two-step melting-Bridgman growth (MBG). Our results show that the crystal quality of the BSTS depend strongly on the growth method. Crystal structure and composition analyses suggest a better homogeneity and highly-ordered crystal structure in BSTS grown by MBG method. This correlates well to sample electrical transport properties, where a substantial improvement in surface mobility is observed in MBG BSTS devices. The enhancement in crystal quality and mobility allow the observation of well-developed quantum Hall effect at low magnetic field.

cond-mat.mtrl-sci↗