arXiv subjects

Subhasis Chattopadhyay

Publications and source records attributed to Subhasis Chattopadhyay.

At least 19 recordsLinked to original sources

arXiv2026

Impact of Baryon anti-Baryon annihilation on hyperon ($\Lambda$, $\bar\Lambda$) production and apparent strangeness enhancement in $\bar\Lambda/\bar{p}$ in heavy ion collisions at SPS energy

A deconfined medium of quarks and gluon, called the Quark-Gluon Plasma (QGP) is produced when heavy-nuclei are collided at relativistic energies. The QGP formation is often characterized by a phenomenon called strangeness enhancement where, the relative production of strange-to-non-strange particles are enhanced in central collisions compared to peripheral or proton-proton interactions. Besides the enhancement in K/$\pi$ ratios, a non-monotonic energy dependence was also reported for $\bar{\Lambda}$ to $\bar{p}$ ratios at CERN SPS, attributed to a signature for the strangeness enhancement as well. As anti-particles are produced directly from the reaction, the $\bar{\Lambda}$/$\bar{p}$ ratios are considered as a cleaner probe for the strangeness enhancement. However, at this energy range hadronic interactions have a dominant role to play and, importantly for $\bar{\Lambda}$ and $\bar{p}$, processes like baryon-anti-baryon ($\mathrm{B\bar{B}}$) annihilation can have a significant impact. In this work, we use a hadronic transport model UrQMD, to investigate the role of baryon-anti-baryon ($\mathrm{B\bar{B}}$) annihilation on $\Lambda$, $\bar{\Lambda}$ hyperon production and its effect on $\bar{\Lambda}$/$\bar{p}$ ratios. The UrQMD calculations that include $\mathrm{B\bar{B}}$ annihilation can produce the trend of average transverse mass spectra for $\Lambda$ and $\bar{\Lambda}$, as well as, the characteristic enhancement in $\bar{\Lambda}$/$\bar{p}$ ratios in data as a function of centrality and collision energy. Furthermore, $\bar{\Lambda}$/$\bar{p}$ ratios extracted from the feed-down corrected SPS data are seen to be in good agreement with UrQMD model calculations with $\mathrm{B\bar{B}}$ annihilation. This suggests that $\bar{\Lambda}$/$\bar{p}$ enhancement is not necessarily because of strangeness enhancement and $\mathrm{B\bar{B}}$ annihilation has a significant role to play.

nucl-th↗

arXiv2026

Searching for initial state fluctuations in heavy ion collisions at FAIR energy using Principal Component Analysis

In high energy heavy ion collisions, the initial configurations of the colliding nuclei play an important role in determining the reaction type and the products of the reaction. The initial arrangement of nucleons within the overlap region of two colliding nuclei is generally asymmetric and such asymmetries reflect themselves in the measurement final state momentum anisotropy. Also initial distribution of the nucleons are subjected to large quantum fluctuation causing large energy deposition in a small region. The final state observables related momentum anisotropies although sensitive to such localized fluctuations but their true effect gets diluted because these observables are calculated by averaging over a set of events. Also, such fluctuations in the initial states are random and uncontrolled. Thus, identifying their effect from event-averaged final state observable is difficult. However, it would be interesting to know the origin of such fluctuations and how these fluctuation are eventually translated to the final state. In this work, we at first introduce such localized fluctuations in the initial configurations, also called hot spots, by implementing spatial rearrangements of nucleon position in the colliding nuclei in the central Pb+Pb collisions at E$_{lab}$=20 AGeV ($\sqrt{s}$=6.27 GeV) using the UrQMD event generator. Then the final state distributions of one or two dimensional variables e.g., ($\eta$, $\phi$, $p_T$) and ($\eta-p_T$, $\phi-p_T$, $\eta-\phi$) of the produced pions are analysed using the principal component analysis (PCA) technique. The eigenvalues of the principal components have been studied for various initial configurations, event fractions containing hot spots in the initial condition and for event centralities with an aim to find it's sensitivity to the initial hot spot configurations.

nucl-th↗

arXiv2025

Reexamination of eccentricity scaling of elliptic flow and incomplete thermalization scenario in heavy-ion collisions at energies available at CERN Large Hadron Collider

In this article, we reexamine the formulation for extraction of Knudsen number ($K$), the ratio of shear viscosity to entropy density ($\eta/s$), within the incomplete thermalization scenario, using eccentricity scaling of elliptic flow ($v_{2}$) of final state hadrons. Data on centrality dependence of charged hadron $v_{2}$ in Xe-Xe and Pb-Pb collisions, measured by ALICE and CMS collaborations at LHC are analyzed for this purpose. Results have been compared using two different models of collision namely Glauber Monte Carlo and TRENTO. The measured $v_{2}$, even for $\sqrt{s_{NN}}=5.02$ TeV most central Pb-Pb collisions is found to be below the ideal hydrodynamic limit by at least $15 \%$. Extracted $\eta/s$ of the medium exhibit heavy dependence on the employed initial conditions. Impact of the Pade approximants based alternative formulation of the functional relation between $v_{2}$ and $K$ are also investigated in detail. Our studies reconfirm the importance of clarifying the initial state configuration as well as the inbuilt ambiguities in employing the transport approach based on incomplete equilibrium in a strongly coupled regime at LHC.

hep-ph↗

arXiv2023

Parallelization of Garfield++ and neBEM to simulate space charge effects in RPCs

Numerical simulation of avalanches, saturated avalanches, and streamers can help us understand the detector physics of Resistive Plate Chambers (RPC). 3D Monte Carlo simulation of an avalanche inside an RPC, the transition from avalanche to saturated avalanche to streamer may help the search for the optimum voltage and alternate gas mixtures. This task is dauntingly resource-hungry, especially when space charge effects become important, which often coincides with important regimes of operation of these devices. By modifying the electric field inside the RPC dynamically, the space charge plays a crucial role in determining the response of the detector. In this work, a numerical model has been proposed to calculate the dynamic space-charge field inside an RPC and the same has been implemented in the Garfield++ framework. By modeling space charge as the large number of line charges and using the multithreading technique OpenMP to calculate electric field, drift line, electron gain, and space charge field, it has been possible to maintain time consumption within reasonable limits. For this purpose, a new class, pAvalancheMC has been introduced in Garfield++. The calculations have been successfully verified with those from existing solvers and an example is provided to show the performance of pAvalancheMC. Moreover, the details of the transition of an avalanche into a saturated avalanche have been discussed. The induced charge distribution is calculated for a timing RPC and results are verified with the experiment.

physics.ins-det↗

arXiv2022

Numerical simulation of the response of single gap timing RPCs with the space charge effects and Garfield++

In this article, we report the simulated response of timing RPCs of different gas gaps. A 3D Montecarlo code was developed and integrated with Garfield++ to simulate the avalanche processes with space charge effects which allow actual charge and timing spectrums. The results of this study are presented with examples of timing RPCs of gas gaps 0.02 cm and 0.03 cm.

physics.ins-det↗

arXiv2022

Investigating the role of partonic and hadronic dynamics in mass splitting of elliptic anisotropy in p-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The mass ordering of $v_{2}^{hadron}$ is regarded as one of the key signatures of collective behaviour in ultra relativistic heavy ion collisions. This observation has been found to be in compliance with the hydrodynamical response of a strongly interacting system to the initial spatial anisotropy. Flow co-efficients measured with identified particles in p-Pb/d-Au collisions have shown similar mass-splitting of $v_{2}^{hadron}$ indicating towards the presence of collective dynamics in small collision systems. Arguably, small size in the overlap geometry of such colliding systems may not be suitable for hydrodynamical treatment that demands an early thermalization. Studies based on a multi phase transport model suggests that elliptic or triangular anisotropy is primarily due to escape mechanism of partons rather than hydro like collectivity and mass ordering of $v_{2}^{hadron}$ can be generated from coalescence dynamics as implemented in string melting version of AMPT even when parton azimuthal directions are randomized. In this work, studies have been performed on p-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV using AMPT model which has been found to explain the elliptic and traingular flow in such a system where escape mechanism is the dominant source of flow generation. We report that the mass splitting of $v_{2}^{hadron}$ can originate independently both at the partonic and hadronic level in the string melting version of the AMPT model.

hep-ph↗

arXiv2022

Ridge from jet-medium interaction in p-Pb collisions at $\sqrt{s_{NN} }$ = 5.02 TeV

In this paper we report the effect of the jet-medium interplay as implemented in EPOS 3 on the ridge like structure observed in high multiplicity p-Pb collisions at $\sqrt{s_{NN}} = $ 5.02 TeV. EPOS 3 takes into account hydrodynamically expanding bulk matter, jets and the jet-medium interaction. The basis of this model is multiple scatterings where each scattering finally produces flux tube / string. In the higher multiplicity event classes where the flux tube/string density is higher, there is a finite probability that the strings will pick up quarks and antiquarks (or diquarks) from the bulk (core) for flux tube breaking to produce jet hadrons (corona) instead of producing them via usual Schwinger mechanism. This will eventually create a correlation between core and corona and also influence the corona-corona correlation as the corona particles containing quarks and antiquarks (or diquarks) from the bulk also carry the fluid information. We report the relative contributions of the core-core, core-corona, corona-core and corona-corona correlations towards the ridge in the high and low multiplicity p-Pb collisions at $\sqrt{s_{NN}} = $ 5.02 TeV using the data generated by EPOS 3. The multiplicity evolution of the ridges in all the cases is also reported.

hep-ph↗

arXiv2022

Effect of radial flow on two particle correlations with identified triggers at intermediate $p_{T}$ in p-Pb collisions at $\sqrt{s_{NN}} = $ 5.02 TeV

Results from the two-particle correlation between identified triggers (pions ($π^{\pm}$) , protons (p/$\bar{p}$))) and un-identified charged particles at intermediate transverse momentum ($p_{T}$) in p-Pb collisions at $\sqrt{s_{NN}} = $ 5.02 TeV have been presented. The events generated from a hybrid Monte-Carlo event generator, EPOS 3.107 that implements a flux-tube initial conditions followed by event by event 3+1D viscous hydrodynamical evolution, have been analysed to calculate two-dimensional correlation functions in $Δη$-$Δϕ$. The strength of angular correlations at small relative angles (jet-like correlations), quantified in terms of near-side jet-like per-trigger yield has been calculated as a function of the event multiplicity. The yield associated with pion triggers exhibit negligible multiplicity dependence, while the proton-triggered yield shows a gradual suppression from low to high multiplicity events. In small collision systems like p-Pb where jet modification is expected to be less dominant, the observed suppression may be associated with the hydrodynamical evolution of the bulk system that generates an outward radial flow. Analogous measurements in Au-Au collisions at RHIC energy have shown a hint of dilution in proton-triggered correlation at its highest multiplicity suggesting that the soft physics processes in p-Pb and heavy ion collisions may have qualitative similarity.

nucl-ex↗

arXiv2022

Development of a water-based cooling system for the Muon Chamber detector system of the CBM experiment

A water-based cooling system is being investigated to meet the cooling requirement of the Gas Electron Multiplier (GEM) based Muon Chamber (MuCh) detector system of the Compressed Baryonic Matter (CBM) experiment at GSI, Germany. The system is based on circulating cold water through the channels inside an aluminium plate. The aluminium plate is attached to a GEM chamber. A feasibility study is conducted on one small and two real-size prototype cooling plates. A microcontroller based unit has been built and integrated into the system to achieve automatic control and monitoring of temperature on plate surface. The real-size prototypes have been used in a test beam experiment at the CERN SPS (Super Proton Synchrotron) with the lead beam on a lead target. A setup using three prototype modules has been prepared in the lab for testing in a simulated real life environment. This paper discusses the working principle, mechanical design, fabrication, and test results of the cooling prototypes in detail.

physics.ins-det↗

arXiv2022

Numerical study of effects of electrode parameters and image charge on the electric field configuration of RPCs

The working of a resistive plate chamber depends on the electric field applied inside the gas gap. The strength of this electric field inside the gas gap depends on parameters like electrode thickness, permittivity, gas gap, among others. The applied electric field can get significantly modified by space charge effect. This can be a major concern while working in high rate particle physics experiments. Accumulation of space charge generated due to consecutive avalanches can distort the applied field. During this investigation, we have observed that the strength of this perturbation in electric field is a function of the amount of charge, electrode thickness, permittivity, and gas gap. In this paper, we have studied the dependence of the applied field on parameters linked to RPC fabrication, mentioned above. In addition, we have used the method of image to calculate the additional polarisation field due to space charge for a basic five layers of the geometry of an RPC. The variation of the perturbation in electric field with the same three parameters electrode thickness, permittivity, gas gap has also been discussed.

physics.ins-det↗

arXiv2022

Performance of a prototype bakelite RPC at GIF++ using self-triggered electronics for the CBM Experiment at FAIR

The Muon Chamber (MuCh) is a sub-system of the Compressed Baryonic Matter (CBM) experiment for the detection of low-mass-vector mesons produced in high energy heavy-ion collisions at beam energies ranging from 2 AGeV to 11 AGeV and decaying in the di-muon channel. MuCh consists of a segmented absorber and four detector triplet stations sandwiched between the absorber segments. At the 3rd and 4th stations of MuCh, Resistive Plate Chambers (RPCs) have been conceived for muon tracking. We have tested the performance of a low resistivity bakelite RPC prototype equipped with self-triggered front end electronics (MuCh-XYTER) for the CBM Muon Chamber. A systematic study on the muon detection efficiency and time resolution has been carried out in a high-rate photon background at the Gamma Irradiation Facility (GIF++) at CERN. The details of the measurement setup and the results are presented here.

physics.ins-det↗

arXiv2021

Longitudinal asymmetry in heavy ion collisions at RHIC

The longitudinal asymmetry arises in relativistic heavy ion collisions due to fluctuation in the number of participating nucleons. This asymmetry causes a shift in the center of mass rapidity of the participant zone. The rapidity shift as well as the longitudinal asymmetry have been found to be significant at the top LHC energy for collisions of identical nuclei. We study the longitudinal asymmetry and its effect on charged particle rapidity distribution and anisotropic flow parameters at relatively lower RHIC energies using a model calculation. The rapidity shift is found to be more pronounced for peripheral collisions, smaller systems and also for lower beam energies due to longitudinal asymmetry. A detailed study has been done by associating the average rapidity shift to a polynomial relation where the coefficients of this polynomial characterize the effect of the asymmetry. We show that the rapidity shift may affect observables significantly at RHIC energies.

nucl-th↗

arXiv2021

Electro-magnetic field fluctuation and its correlation with the participant plane in Au+Au and isobaric collisions at $\sqrt{s_{NN}}=200$ GeV

Intense transient electric ({\bf E}) and magnetic ({\bf B}) fields are produced in the high energy heavy-ion collisions. The electromagnetic fields produced in such high-energy heavy-ion collisions are proposed to give rise to a multitude of exciting phenomenon including the Chiral Magnetic Effect. We use a Monte Carlo (MC) Glauber model to calculate the electric and magnetic fields, more specifically their scalar product $\bf{E}\cdot\bf{B}$, as a function of space-time on an event-by-event basis for the Au+Au collisions at $\sqrt{s_{NN}}=200$ GeV for different centrality classes. We also calculate the same for the isobars Ruthenium and Zirconium at $\sqrt{s_{NN}}=200$ GeV. In the QED sector $\bf{E}\cdot\bf{B}$ acts as a source of Chiral Separation Effect, Chiral Magnetic Wave, etc., which are associated phenomena to the Chiral Magnetic Effect. We also study the relationships between the electromagnetic symmetry plane angle defined by $\bf{E}\cdot\bf{B}$ ($ψ_{E.B}$) and the participant plane angle $ψ_{P}$ defined from the participating nucleons for the second-fifth order harmonics.

hep-ph↗

arXiv2021

Estimation of initial state structures in high energy heavy-ion collisions using Principal Component Analysis (PCA)

In high-energy heavy-ion collisions, structures in the initial collision zone are a matter of intense investigation, both from theory and experimental points of view. A large number of models have been developed to represent the initial state of the collision including Glauber model, Colour Glass Condensate (CGC) among others. Another important aspect of the study is to investigate proper observables that will be sensitive to the initial collision zone. In this work, we have discussed a formalism to implement the spatial clusters at the partonic level in the string melting version of the AMPT model for PbPb collisions at $\sqrt{s_{NN}}$ = 200 GeV. These clusters are then propagated through the AMPT hadronization scheme. The Principal Component Analysis (PCA) has been used on the $η$, $ϕ$ and $p_T$ distributions of the produced charged particles and the eigenvalues have been compared before and after the implementation of the clustering. It is found that for all these three different distributions, all the prominent PCA modes have shown sensitivity to the clustering. A centrality dependent study has also been performed on those eigenvalues.

nucl-th↗

arXiv2021

Correlation between initial spatial anisotropy and final momentum anisotropies in relativistic heavy ion collisions

The particle momentum anisotropy ($v_n$) produced in relativistic nuclear collisions is considered to be a response of the initial geometry or the spatial anisotropy $ε_n$ of the system formed in these collisions. The linear correlation between $ε_n$ and $v_n$ quantifies the efficiency at which the initial spatial eccentricity is converted to final momentum anisotropy in heavy ion collisions. We study the transverse momentum, collision centrality, and beam energy dependence of this correlation for different charged particles using a hydrodynamical model framework. The ($ε_n -v_n$) correlation is found to be stronger for central collisions and also for n=2 compared to that for n=3 as expected. However, the transverse momentum ($p_T$) dependent correlation coefficient shows interesting features which strongly depends on the mass as well as $p_T$ of the emitted particle. The correlation strength is found to be larger for lighter particles in the lower $p_T$ region. We see that the relative fluctuation in anisotropic flow depends strongly in the value of $η/s$ specially in the region $p_T <1$ GeV unlike the correlation coefficient which does not show significant dependence on $η/s$.

nucl-th↗

arXiv2021

Study of medium modified jet shape observables in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV using EPOS and JEWEL event generators

The jet-medium interaction in high energy heavy ion collisions is an important phenomena to characterize the hot and dense medium produced in such collisions. The study of medium-induced modifications to the substructure of inclusive charged jets indicates a redistribution of energy inside the jet cone and provides insight into the energy loss mechanisms of jets in the medium. We investigate the in-medium modification to two jet shape observables i.e., the differential jet shape ($ρ$(r)) and the angularity (g) in the most central $Pb-Pb$ collisions at $\sqrt{s_{NN}} ~=~ 2.76 $ TeV using two commonly used event generators i.e., JEWEL (recoil OFF) and EPOS-3 in the jet-p$_T$ range of 20-40 GeV/c. JEWEL with recoil OFF has been used primarily as a reference system as that has been found to explain the global jet observables satisfactorily but lacks in jet-shape variables at higher jet-radii. EPOS-3 that explains the bulk properties in such collisions quite well takes into account a hydrodynamically evolving bulk matter, jets and hard-soft interactions. A comparison between the results from these models shows that while JEWEL (recoil OFF) does not explain the distribution of lost energy at higher radii with respect to the jet-axis, EPOS-3 explains the effect quite well. However, in EPOS-3, the partonic energy loss mechanism and secondary hard-soft interactions during hadronization and hadronic cascade phase are different from the conventional jet energy loss models. The current study can, therefore, provide important new insights on mechanisms regarding the modeling of the medium and hard-soft interactions in heavy ion collisions.

hep-ph↗

arXiv2020

Numerical study of space charge electric field inside Resistive Plate Chamber

Resistive plate chamber (RPC) is one of the state-of-the-art particle detection technology for the High Energy Physics (HEP) experiments. The basic operating mechanism of an RPC involves ionization of gas due to the passage of charged particles followed by electron transport , avalanche, and subsequent electromagnetic induction on readout strips due to the movement of the electrons and ions. Especially during streamer mode of operation, the electric field applied to the RPC can get significantly modified due to the presence of large number of electrons and ions. In this study, we have worked on dominant issues related to the estimation of electric field due to the space charge arising out of the presence of electrons, ions within an RPC. For this purpose we have considered two approaches: representation of the space charge cloud as (a) a collection of ring charges, and (b) as a collection of line charges. The results from these different methods have been compared with results available in the literature.

physics.ins-det↗

arXiv2019

Numerical studies on effect of operating conditions and geometrical components on the timing response and efficiency of RPC

A detailed numerical simulation has been performed to investigate the timing properties of a standard RPC geometry in order to optimize its application in INO-ICAL experiment designed for studying atmospheric neutrinos. The timing information provided by the RPC is an important observable in the experiment to determine the direction of the neutrinos. Effects of various operating conditions and design components on the RPC timing response, mainly the average signal arrival time and the time resolution have been studied in this context. The dependence of the detector efficiency on the same parameters has also been presented.

physics.ins-det↗