arXiv subjects

Subhasis Chattopadhyay

Publications and source records attributed to Subhasis Chattopadhyay.

At least 37 records · Page 2Linked to original sources

arXiv2019

Numerical studies on effect of operating conditions and geometrical components on the timing response and efficiency of RPC

A detailed numerical simulation has been performed to investigate the timing properties of a standard RPC geometry in order to optimize its application in INO-ICAL experiment designed for studying atmospheric neutrinos. The timing information provided by the RPC is an important observable in the experiment to determine the direction of the neutrinos. Effects of various operating conditions and design components on the RPC timing response, mainly the average signal arrival time and the time resolution have been studied in this context. The dependence of the detector efficiency on the same parameters has also been presented.

physics.ins-det↗

arXiv2019

Effect of simulating parity-odd observables in high energy heavy ion collisions on Balance Functions of charged particles and elliptic flow of pions

At the early stage of heavy ion collisions, non-trivial topologies of the gauge fields can be created resulting in an imbalance of axial charge density and eventually separation of electric charges along the direction of the magnetic field produced in such collisions. This process is called the chiral magnetic effect (CME). In this work we implement such a charge separation at the partonic level in AMPT for Au+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV to study its consequence on experimental observables. We present the effects on the pion elliptic flow ($v_2$) and the charged particle balance function (BF) for varying strengths of initial charge separation. We find that the shape of the balance function is sensitive to the increasing charge separation. $v_2$ of pion shows a strong decreasing trend at higher transverse momenta ($p_T$) with increasing charge separation. Charge balance functions show a peak at $Δϕ\sim 180 $ with charge separation implemented in the partonic level as expected for the parity violation. We have also calculated parity observable $γ$ in the form of BF's moments. $γ$ shows a decreasing trend with charge separation. It has a negative value for charge separation produced by flipping more than 30 $\%$ of quarks in the parton level. We also notice that $<γ>$ for the same charge correlation and the opposite charge correlation shows negative and positive values, respectively.

nucl-th↗

arXiv2018

A Proof-of-principle for Time-Of-Flight Positron Emission Tomography Imaging

Time-Of-Flight (TOF) is a noble technique that is used in Positron Emission Tomography (PET) imaging worldwide. The scintillator based imaging system that is being used around the world for TOF-PET is very expensive. Multi-gap Resistive Plate Chambers (MRPCs) are gaseous detectors which are easy to fabricate, inexpensive and have excellent position and timing resolution. They can be used as a suitable alternative to highly expensive scintillators. For the sole purpose of TOF-PET, a pair of 18 cm $\times$ 18 cm, 5 gap, glass-based MRPC modules have been fabricated. Our main aim was to determine the shift in the position of the source (Na-22) with these fabricated MRPCs. In this document, the details of the experimental results will be presented.

physics.ins-det↗

arXiv2018

Development and Characterization of 6-gap Bakelite Multi-gap Resistive Plate Chamber

The Multi-gap Resistive Plate Chamber (MRPC) is an advanced form of Resistive Plate Chamber (RPC) detector where the gas gap is divided into sub-gaps. MRPCs are known for their good time resolution and detection efficiency for charged particles. They have found suitable applications in several high energy physics experiments like ALICE in LHC, CERN, Geneva, Switzerland, and STAR in RHIC, BNL, USA. As they have very good time resolution and are of low cost, they can be a suitable replacement for very expensive scintillators used in Positron Emission Tomography Imaging. The MRPCs that are being used nowadays are developed with glass electrodes. We have made an attempt to develop a 6-gap MRPC using bakelite electrodes. The outer electrodes are of dimensions 15 cm $\times$ 15 cm $\times$ 0.3 cm and the inner electrodes are of dimension 14 cm $\times$ 14 cm $\times$ 0.05 cm. The glossy finished electrode surfaces have not been treated with any oil like linseed, silicone for smoothness. The performance of the detector has been studied measuring the efficiency, noise rate and time resolution with cosmic rays. This effort is towards the development of a prototype for Positron Emission Tomography with the Time-Of-Flight technique using MRPCs. Details of the development procedure and performance studies have been presented here.

physics.ins-det↗

arXiv2018

Investigating the radial flow like effects using identified triggered correlation in pp collisions at $\sqrt{s}$ = 7 TeV

An inclusive baryon to meson enhancement with increase in multiplicity has been observed in pp collisions at $\sqrt{s}$= 7 TeV. Such a striking feature of the data can be explained by approaches based on hydrodynamics and multi-parton interactions (MPI) coupled with color reconnection (CR) mechanism. In this paper, we investigate the multiplicity evolution of the charged particle yields associated with pions and protons selected from the intermediate $p_{T}$ region where the inclusive baryon to meson enhancement has been observed. The study has been peformed using EPOS 3 (hydrodynamics) and PYTHIA 8 (MPI with CR) event generators in pp collisions at 7 TeV. We find that the response of the individual pion and proton triggered correlation towards these two mechanisms is different and can be used to disentangle the effect of one from the other. The current study can, therefore, provide important insights on the origin of radial flow like effects in high multiplicity pp collisions at the LHC energies.

hep-ph↗

arXiv2017

Physics Potential of the ICAL detector at the India-based Neutrino Observatory (INO)

The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separately over a wide range of energies and path lengths. The primary focus of this experiment is to explore the Earth matter effects by observing the energy and zenith angle dependence of the atmospheric neutrinos in the multi-GeV range. This study will be crucial to address some of the outstanding issues in neutrino oscillation physics, including the fundamental issue of neutrino mass hierarchy. In this document, we present the physics potential of the detector as obtained from realistic detector simulations. We describe the simulation framework, the neutrino interactions in the detector, and the expected response of the detector to particles traversing it. The ICAL detector can determine the energy and direction of the muons to a high precision, and in addition, its sensitivity to multi-GeV hadrons increases its physics reach substantially. Its charge identification capability, and hence its ability to distinguish neutrinos from antineutrinos, makes it an efficient detector for determining the neutrino mass hierarchy. In this report, we outline the analyses carried out for the determination of neutrino mass hierarchy and precision measurements of atmospheric neutrino mixing parameters at ICAL, and give the expected physics reach of the detector with 10 years of runtime. We also explore the potential of ICAL for probing new physics scenarios like CPT violation and the presence of magnetic monopoles.

physics.ins-det↗

arXiv2017

Elliptic flow of $ϕ$-meson at intermediate $p_{T}$: Influence of mass versus quark number

We have studied elliptic flow ($v_{2}$) of $ϕ$-mesons in the framework of a multi phase transport (AMPT) model at LHC energy. In the realms of AMPT model we observe $ϕ$-mesons at intermediate transverse momentum ($p_{T}$) deviate from the previously observed (at RHIC) particle type grouping of $v_{2}$ according to the number of quark content i.e, baryons and mesons. Recent results from the ALICE Collaboration have shown that $ϕ$-meson and proton $v_{2}$ has a similar trend, possibly indicating that particle type grouping might be due to the mass of the particles and not the quark content. A stronger radial boost at LHC compared to RHIC seems to offer a consistent explanation to such observation. However, recalling that $ϕ$-mesons decouple from the hadronic medium before additional radial flow is build-up in the hadronic phase, similar pattern in $ϕ$-meson and proton $v_{2}$ may not be due to radial flow alone. Our study reveals that models incorporating $ϕ$-meson production from $K\bar{K}$ fusion in the hadronic rescattering phase also predict a comparable magnitude of $ϕ$-meson and proton $v_{2}$ particularly in the intermediate region of $p_{T}$. Whereas, $v_{2}$ of $ϕ$-mesons created in the partonic phase is in agreement with quark-coalescence motivated baryon-meson grouping of hadron $v_{2}$. This observation seems to provide a plausible alternative interpretation for the apparent mass-like behaviour of $ϕ$-meson $v_{2}$. We have also observed a violation of hydrodynamical mass ordering between proton and $ϕ$-meson $v_{2}$ further supporting that $ϕ$-mesons are negligibly affected by the collective radial flow in the hadronic phase due to the small in-medium hadronic interaction cross sections.

nucl-th↗

arXiv2016

Thermalization of dense hadronic matter in Au + Au collisions at the energies available at FAIR

The conditions of local thermodynamic equilibrium of baryons (non-strange, strange) and mesons (strange) are presented for central Au + Au collisions at FAIR energies using the microscopic transport model UrQMD. The net particle density, longitudinal-to-transverse pressure anisotropy and inverse slope parameters of the energy spectra of non-strange and strange hadrons are calculated inside a cell in the central region within rapidity window $|y| < 1.0$ at different time steps after the collision. We observed that the strangeness content is dominated by baryons at all energies, however contribution from mesons become significant at higher energies. The time scale obtained from local pressure (momentum) isotropization and thermalization of energy spectra are nearly equal and found to decrease with increase in laboratory energy. The equilibrium thermodynamic properties of the system are obtained with statistical thermal model. The time evolution of the entropy densities at FAIR energies are found very similar with the ideal hydrodynamic behaviour at top RHIC energy.

nucl-th↗

arXiv2016

Project X: Physics Opportunities

Part 2 of "Project X: Accelerator Reference Design, Physics Opportunities, Broader Impacts". In this Part, we outline the particle-physics program that can be achieved with Project X, a staged superconducting linac for intensity-frontier particle physics. Topics include neutrino physics, kaon physics, muon physics, electric dipole moments, neutron-antineutron oscillations, new light particles, hadron structure, hadron spectroscopy, and lattice-QCD calculations. Part 1 is available as arXiv:1306.5022 [physics.acc-ph] and Part 3 is available as arXiv:1306.5024 [physics.acc-ph].

hep-ex↗

arXiv2016

Numerical study on the effect of design parameters and spacers on RPC signal and timing properties

Numerical calculations have been performed to understand the reason for the observed non-uniform response of a Resistive Plate Chamber (RPC) in a few critical regions such as near edge spacers and corners of the device. In this context, the signal from a RPC due to the passage of muons through different regions has been computed. Also, a simulation of RPC timing properties is presented along with the effect of the applied field, gas mixture and geometrical components.

physics.ins-det↗

arXiv2016

Testing of coalescence mechanism in high energy heavy ion collisions using two-particle correlations with identified particle trigger

In central Au-Au collisions at top RHIC energy, two particle correlation measurements with identified hadron trigger have shown attenuation of near side proton triggered jet-like yield at intermediate transverse momentum ($p{_T}$), 2$< p{_T} <$ 6 GeV/$\it{c}$. The attenuation has been attributed to the anomalous baryon enhancement observed in the single inclusive measurements at the same $p{_T}$ range. The enhancement has been found to be in agreement with the models invoking coalescence of quarks as a mechanism of hadronization. Baryon enhancement has also been observed at LHC in the single inclusive spectra. We study the consequence of such an enhancement on two particle correlations at LHC energy within the framework of A Multi Phase Transport (AMPT) model that implements quark coalescence as a mode of hadronization. In this paper we have calculated the proton over pion ratio and the near side per trigger yield associated to pion and proton triggers at intermediate $p{_T}$ from String Melting (SM) version of AMPT. Results obtained are contrasted with the AMPT Default (Def.) which does not include coalescence. Baryon enhancement has been observed in AMPT SM at intermediate $p{_T}$. Near side jet-like correlated yield associated to baryon (proton) trigger in the momentum region where baryon generation is enhanced is found to be suppressed as compared to the corresponding yields for the meson (pion) trigger in most central Pb-Pb events. No such effect has been found in the Default version of AMPT.

nucl-th↗

arXiv2016

Effect of plate roughness on the field near RPC plates

The inner surfaces of the electrodes encompassing the gas volume of a Resistive Plate Chamber (RPC) have been found to exhibit asperities with, grossly, three kinds of features. The desired uniform electric field within the gas volume of RPC is expected to be affected due to the presence of these asperities, which will eventually affect the final response from the detector. In this work, an attempt has been made to model the highly complex roughness of the electrode surfaces and compute its effect on the electrostatic field within RPC gas chamber. The calculations have been performed numerically using Finite Element Method (FEM) and Boundary Element Method (BEM) and the two methods have been compared in this context.

physics.ins-det↗

arXiv2016

Performance of a large size triple GEM detector at high particle rate for CBM Experiment at FAIR

In CBM Experiment at FAIR, dimuons will be detected by a Muon Chamber (MUCH) consisting of segmented absorbers of varying widths and tracking chambers sandwiched between the absorber-pairs. In this fixed target heavy-ion collision experiment, operating at highest interaction rate of $10~MHz$ for $Au+Au$ collision, after the first MUCH detector station in its inner radial ring will face a particle rate of $1~MHz/cm^2$. To operate at such a high particle density, GEM technology based detectors have been selected for the first two stations of MUCH. We have reported earlier the performance of several small-size GEM detector prototypes built at VECC for use in MUCH. In this work, we report on a large GEM chamber prototype tested with proton beam of momentum $2.36~GeV/c$ at COSY-Jüelich Germany. The detector was read out using nXYTER ASIC operated in self-triggering mode. An efficiency higher than $96\%$ at $ΔV_{GEM}~=~375.2~V$ was achieved. The variation of efficiency with the rate of incoming protons has been found to vary within $2\%$ when tested up to a maximum rate of $2.8~MHz/cm^2$. The gain was found to be stable at high particle rate with a maximum variation of $\sim~9\%$.

physics.ins-det↗

arXiv2016

Fabrication and Characterisation of Oil-Free Large High Pressure Laminate Resistive Plate Chamber

A large (240 cm $\times$ 120 cm $\times$ 0.2 cm) oil-free High Pressure Laminate (HPL), commonly referred as "bakelite", Resistive Plate Chamber (RPC) has been developed at VECC-Kolkata using locally available P-302 OLTC grade HPL. The chamber has been operated in streamer mode using Argon, Freon(R134a) and Iso-butane in a ratio of 34:57:9 by volume. The electrodes and glue samples have been characterised by measuring their electrical parameters like bulk resistivity and surface resistivity. The performance of the chamber has been studied by measuring the efficiency, its uniformity and stability in detection of cosmic muons. Timing measurement has been performed at a central location of the chamber. The chamber showed an efficiency $>$95$\%$ and time resolution ($σ$), at the point of measurement, $\sim$0.83 ns at 9000V. Details of the material characterisation, fabrication procedure and performance studies have been discussed.

physics.ins-det↗

arXiv2016

Long Term Performance Studies of Large Oil-Free Bakelite Resistive Plate Chamber

Several high energy physics and neutrino physics experiments worldwide require large-size RPCs to cover wide acceptances. The muon tracking systems in the Iron calorimeter (ICAL) in the INO experiment, India and the near detector in DUNE at Fermilab are two such examples. A (240 cm $\times$ 120 cm $\times$ 0.2 cm) bakelite RPC has been built and tested at Variable Energy Cyclotron Centre, Kolkata, using indigenous materials procured from the local market. No additional lubricant, like oil has been used on the electrode surfaces for smoothening. The chamber is in operation for $>$ 365 days. We have tested the chamber for its long term operation. The leakage current, bulk resistivity, efficiency, noise rate and time resolution of the chamber have been found to be quite stable during the testing peroid. It showed an efficiency $>$ 95$\%$ with an average time resolution of $\sim$0.83 ns at the point of measurement at 9000 V throughout the testing period. Details of the long term performance of the chamber have been discussed.

physics.ins-det↗

arXiv2015

A Novel Method for Soft Error Mitigation in FPGA using Adaptive Cross Parity Code

Field Programmable Gate Arrays (FPGAs) are more prone to be affected by transient faults in presence of radiation and other environmental hazards compared to Application Specific Integrated Circuits (ASICs). Hence, error mitigation and recovery techniques are absolutely necessary to protect the FPGA hardware from soft errors arising due to such transient faults. In this paper, a new efficient multi-bit error correcting method for FPGAs is proposed using adaptive cross parity check (ACPC) code. ACPC is easy to implement and the needed decoding circuit is also simple. In the proposed scheme total configuration memory is partitioned into two parts. One part will contain ACPC hardware, which is static and assumed to be unaffected by any kind of errors. Other portion will store the binary file for logic, which is to be protected from transient error and is assumed to be dynamically reconfigurable (Partial reconfigurable area). Binary file from the secondary memory passes through ACPC hardware and the bits for forward error correction (FEC) field are calculated before entering into the reconfigurable portion. In the runtime scenario, the data from the dynamically reconfigurable portion of the configuration memory will be read back and passed through the ACPC hardware. The ACPC hardware will correct the errors before the data enters into the dynamic configuration memory. We propose a first of its kind methodology for novel transient fault correction using ACPC code for FPGAs. To validate the design we have tested the proposed methodology with Kintex FPGA. We have also measured different parameters like critical path, power consumption, overhead resource and error correction efficiency to estimate the performance of our proposed method.

cs.AR↗

arXiv2015

High speed fault tolerant secure communication for muon chamber using fpga based gbt emulator

The Compressed Baryonic Matter (CBM) experiment is a part of the Facility for Antiproton and Ion Research (FAIR) in Darmstadt at the GSI. The CBM experiment will investigate the highly compressed nuclear matter using nucleus-nucleus collisions. This experiment will examine heavy-ion collisions in fixed target geometry and will be able to measure hadrons, electrons and muons. CBM requires precise time synchronization, compact hardware, radiation tolerance, self-triggered front-end electronics, efficient data aggregation schemes and capability to handle high data rate (up to several TB/s). As a part of the implementation of read out chain of MUCH in India, we have tried to implement FPGA based emulator of GBTx in India. GBTx is a radiation tolerant ASIC that can be used to implement multipurpose high speed bidirectional optical links for high-energy physics (HEP) experiments and is developed by CERN. GBTx will be used in highly irradiated area and more prone to be affected by multi bit error. To mitigate this effect instead of single bit error correcting RS code we have used two bit error correcting (15, 7) BCH code. It will increase the redundancy which in turn increases the reliability of the coded data. So the coded data will be less prone to be affected by noise due to radiation. Data will go from detector to PC through multiple nodes through the communication channel. In order to make the data communication secure, advanced encryption standard (AES - a symmetric key cryptography) and RSA (asymmetric key cryptography) are used after the channel coding.

cs.AR↗

arXiv2015

FPGA based High Speed Data Acquisition System for High Energy Physics Application

In high energy physics experiments (HEP), high speed and fault resilient data communication is needed between detectors/sensors and the host PC. Transient faults can occur in the communication hardware due to various external effects like presence of charged particles, noise in the environment or radiation effects in HEP experiments and that leads to single/multiple bit error. In order to keep the communication system functional in such a radiation environment where direct intervention of human is not possible, a high speed data acquisition (DAQ) architecture is necessary which supports error recovery. This design presents an efficient implementation of field programmable gate array (FPGA) based high speed DAQ system with optical communication link supported by multi-bit error correcting model. The design has been implemented on Xilinx Kintex-7 board and is tested for board to board communication as well as for PC communication using PCI (Peripheral Component Interconnect express). Data communication speed up to 4.8 Gbps has been achieved in board to board and board to PC communication and estimation of resource utilization and critical path delay are also measured.

physics.ins-det↗