arXiv subjects

Sumei Sun

Publications and source records attributed to Sumei Sun.

At least 55 records · Page 3Linked to original sources

arXiv2024

Generative AI for Advanced UAV Networking

With the impressive achievements of chatGPT and Sora, generative artificial intelligence (GAI) has received increasing attention. Not limited to the field of content generation, GAI is also widely used to solve the problems in wireless communication scenarios due to its powerful learning and generalization capabilities. Therefore, we discuss key applications of GAI in improving unmanned aerial vehicle (UAV) communication and networking performance in this article. Specifically, we first review the key technologies of GAI and the important roles of UAV networking. Then, we show how GAI can improve the communication, networking, and security performances of UAV systems. Subsequently, we propose a novel framework of GAI for advanced UAV networking, and then present a case study of UAV-enabled spectrum map estimation and transmission rate optimization based on the proposed framework to verify the effectiveness of GAI-enabled UAV systems. Finally, we discuss some important open directions.

cs.NI↗

arXiv2024

Dynamic Cooperative MAC Optimization in RSU-Enhanced VANETs: A Distributed Approach

This paper presents an optimization approach for cooperative Medium Access Control (MAC) techniques in Vehicular Ad Hoc Networks (VANETs) equipped with Roadside Unit (RSU) to enhance network throughput. Our method employs a distributed cooperative MAC scheme based on Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) protocol, featuring selective RSU probing and adaptive transmission. It utilizes a dual timescale channel access framework, with a ``large-scale'' phase accounting for gradual changes in vehicle locations and a ``small-scale'' phase adapting to rapid channel fluctuations. We propose the RSU Probing and Cooperative Access (RPCA) strategy, a two-stage approach based on dynamic inter-vehicle distances from the RSU. Using optimal sequential planned decision theory, we rigorously prove its optimality in maximizing average system throughput per large-scale phase. For practical implementation in VANETs, we develop a distributed MAC algorithm with periodic location updates. It adjusts thresholds based on inter-vehicle and vehicle-RSU distances during the large-scale phase and accesses channels following the RPCA strategy with updated thresholds during the small-scale phase. Simulation results confirm the effectiveness and efficiency of our algorithm.

eess.SP↗

arXiv2024

Interactive AI with Retrieval-Augmented Generation for Next Generation Networking

With the advance of artificial intelligence (AI), the emergence of Google Gemini and OpenAI Q* marks the direction towards artificial general intelligence (AGI). To implement AGI, the concept of interactive AI (IAI) has been introduced, which can interactively understand and respond not only to human user input but also to dynamic system and network conditions. In this article, we explore an integration and enhancement of IAI in networking. We first comprehensively review recent developments and future perspectives of AI and then introduce the technology and components of IAI. We then explore the integration of IAI into the next-generation networks, focusing on how implicit and explicit interactions can enhance network functionality, improve user experience, and promote efficient network management. Subsequently, we propose an IAI-enabled network management and optimization framework, which consists of environment, perception, action, and brain units. We also design the pluggable large language model (LLM) module and retrieval augmented generation (RAG) module to build the knowledge base and contextual memory for decision-making in the brain unit. We demonstrate the effectiveness of the framework through case studies. Finally, we discuss potential research directions for IAI-based networks.

cs.NI↗

arXiv2024

Risk-Aware and Energy-Efficient AoI Optimization for Multi-Connectivity WNCS with Short Packet Transmissions

Age of Information (AoI) has been proposed to quantify the freshness of information for emerging real-time applications such as remote monitoring and control in wireless networked control systems (WNCSs). Minimization of the average AoI and its outage probability can ensure timely and stable transmission. Energy efficiency (EE) also plays an important role in WNCSs, as many devices are featured by low cost and limited battery. Multi-connectivity over multiple links enables a decrease in AoI, at the cost of energy. We tackle the unresolved problem of selecting the optimal number of connections that is both AoI-optimal and energy-efficient, while avoiding risky states. To address this issue, the average AoI and peak AoI (PAoI), as well as PAoI violation probability are formulated as functions of the number of connections. Then the EE-PAoI ratio is introduced to allow a tradeoff between AoI and energy, which is maximized by the proposed risk-aware, AoI-optimal and energy-efficient connectivity scheme. To obtain this, we analyze the property of the formulated EE-PAoI ratio and prove the monotonicity of PAoI violation probability. Interestingly, we reveal that the multi-connectivity scheme is not always preferable, and the signal-to-noise ratio (SNR) threshold that determines the selection of the multi-connectivity scheme is derived as a function of the coding rate. Also, the optimal number of connections is obtained and shown to be a decreasing function of the transmit power. Simulation results demonstrate that the proposed scheme enables more than 15 folds of EE-PAoI gain at the low SNR than the single-connectivity scheme.

cs.IT↗

arXiv2024

Goal-Oriented Communication, Estimation, and Control over Bidirectional Wireless Links

We consider a wireless networked control system (WNCS) with bidirectional imperfect links for real-time applications such as smart grids. To maintain the stability of WNCS, captured by the probability that plant state violates preset values, at minimal cost, heterogeneous physical processes are monitored by multiple sensors. This status information, such as dynamic plant state and Markov Process-based context information, is then received/estimated by the controller for remote control. However, scheduling multiple sensors and designing the controller with limited resources is challenging due to their coupling, delay, and transmission loss. We formulate a Constrained Markov Decision Problem (CMDP) to minimize violation probability with cost constraints. We reveal the relationship between the goal and different updating actions by analyzing the significance of information that incorporates goal-related usefulness and contextual importance. Subsequently, a goal-oriented deterministic scheduling policy is proposed. Two sensing-assisted control strategies and a control-aware estimation policy are proposed to improve the violation probability-cost tradeoff, integrated with the scheduling policy to form a goal-oriented co-design framework. Additionally, we explore retransmission in downlink transmission and qualitatively analyze its preference scenario. Simulation results demonstrate that the proposed goal-oriented co-design policy outperforms previous work in simultaneously reducing violation probability and cost

eess.SY↗

arXiv2024

Goal-Oriented Integration of Sensing, Communication, Computing, and Control for Mission-Critical Internet-of-Things

Driven by the development goal of network paradigm and demand for various functions in the sixth-generation (6G) mission-critical Internet-of-Things (MC-IoT), we foresee a goal-oriented integration of sensing, communication, computing, and control (GIS3C) in this paper. We first provide an overview of the tasks, requirements, and challenges of MC-IoT. Then we introduce an end-to-end GIS3C architecture, in which goal-oriented communication is leveraged to bridge and empower sensing, communication, control, and computing functionalities. By revealing the interplay among multiple subsystems in terms of key performance indicators and parameters, this paper introduces unified metrics, i.e., task completion effectiveness and cost, to facilitate S3C co-design in MC-IoT. The preliminary results demonstrate the benefits of GIS3C in improving task completion effectiveness while reducing costs. We also identify and highlight the gaps and challenges in applying GIS3C in the future 6G networks.

cs.NI↗

arXiv2023

Flexible-Position MIMO for Wireless Communications: Fundamentals, Challenges, and Future Directions

The flexible-position multiple-input multiple-output (FLP-MIMO), such as fluid antennas and movable antennas, is a promising technology for future wireless communications. This is due to the fact that the positions of antennas at the transceiver and reflector can be dynamically optimized to achieve better channel conditions and, as such, can provide high spectral efficiency (SE) and energy efficiency (EE) gains with fewer antennas. In this article, we introduce the fundamentals of FLP-MIMO systems, including hardware design, structure design, and potential applications. We shall demonstrate that FLP-MIMO, using fewer flexible antennas, can match the channel hardening achieved by a large number of fixed antennas. We will then analyze the SE-EE relationship for FLP-MIMO and fixed-position MIMO. Furthermore, we will design the optimal trajectory of flexible antennas to maximize system sum SE or total EE at a fixed travel distance of each antenna. Finally, several important research directions regarding FLP-MIMO communications are presented to facilitate further investigation.

cs.IT↗

arXiv2023

Multi-User Multi-IoT-Device Symbiotic Radio: A Novel Massive Access Scheme for Cellular IoT

Symbiotic radio (SR) is a promising technique to support cellular Internet-of-Things (IoT) by forming a mutualistic relationship between IoT and cellular transmissions. In this paper, we propose a novel multi-user multi-IoT-device SR system to enable massive access in cellular IoT. In the considered system, the base station (BS) transmits information to multiple cellular users, and a number of IoT devices simultaneously backscatter their information to these users via the cellular signal. The cellular users jointly decode the information from the BS and IoT devices. Noting that the reflective links from the IoT devices can be regarded as the channel uncertainty of the direct links, we apply the robust design method to design the beamforming vectors at the BS. Specifically, the transmit power is minimized under the cellular transmission outage probability constraints and IoT transmission sum rate constraints. The algorithm based on semi-definite programming and difference-of-convex programming is proposed to solve the power minimization problem. Moreover, we consider a special case where each cellular user is associated with several adjacent IoT devices and propose a direction of arrival (DoA)-based transmit beamforming design approach. The DoA-based approach requires only the DoA and angular spread (AS) of the direct links instead of the instantaneous channel state information (CSI) of the reflective link channels, leading to a significant reduction in the channel feedback overhead. Simulation results have substantiated the multi-user multi-IoT-device SR system and the effectiveness of the proposed beamforming approaches. It is shown that the DoA-based beamforming approach achieves comparable performance as the CSI-based approach in the special case when the ASs are small.

cs.IT↗

arXiv2023

Space-Time Shift Keying Aided OTFS Modulation for Orthogonal Multiple Access

Space-time shift keying-aided orthogonal time frequency space modulation-based multiple access (STSK-OTFS-MA) is proposed for reliable uplink transmission in high-Doppler scenarios. As a beneficial feature of our STSK-OTFS-MA system, extra information bits are mapped onto the indices of the active dispersion matrices, which allows the system to enjoy the joint benefits of both STSK and OTFS signalling. Due to the fact that both the time-, space- and DD-domain degrees of freedom are jointly exploited, our STSK-OTFS-MA achieves increased diversity and coding gains. To mitigate the potentially excessive detection complexity, the sparse structure of the equivalent transmitted symbol vector is exploited, resulting in a pair of low-complexity near-maximum likelihood (ML) multiuser detection algorithms. Explicitly, we conceive a progressive residual check-based greedy detector (PRCGD) and an iterative reduced-space check-based detector (IRCD). Then, we derive both the unconditional single-user pairwise error probability (SU-UPEP) and a tight bit error ratio (BER) union-bound for our single-user STSK-OTFS-MA system employing the ML detector. Furthermore, the discrete-input continuous-output memoryless channel (DCMC) capacity of the proposed system is derived. The optimal dispersion matrices (DMs) are designed based on the maximum attainable diversity and coding gain metrics. Finally, it is demonstrated that our STSK-OTFS-MA system achieves both a lower BER and a higher DCMC capacity than its conventional spatial modulation (SM) {and its orthogonal frequency-division multiplexing (OFDM) counterparts. As a benefit, the proposed system strikes a compelling BER vs. system complexity as well as BER vs. detection complexity trade-offs.

cs.IT↗

arXiv2023

Integrated Monostatic and Bistatic mmWave Sensing

Millimeter-wave (mmWave) signals provide attractive opportunities for sensing due to their inherent geometrical connections to physical propagation channels. Two common modalities used in mmWave sensing are monostatic and bistatic sensing, which are usually considered separately. By integrating these two modalities, information can be shared between them, leading to improved sensing performance. In this paper, we investigate the integration of monostatic and bistatic sensing in a 5G mmWave scenario, implement the extended Kalman-Poisson multi-Bernoulli sequential filters to solve the sensing problems, and propose a method to periodically fuse user states and maps from two sensing modalities.

eess.SP↗

arXiv2023

Performance Analysis and Approximate Message Passing Detection of Orthogonal Time Sequency Multiplexing Modulation

In orthogonal time sequency multiplexing (OTSM) modulation, the information symbols are conveyed in the delay-sequency domain upon exploiting the inverse Walsh Hadamard transform (IWHT). It has been shown that OTSM is capable of attaining a bit error ratio (BER) similar to that of orthogonal time-frequency space (OTFS) modulation at a lower complexity, since the saving of multiplication operations in the IWHT. Hence we provide its BER performance analysis and characterize its detection complexity. We commence by deriving its generalized input-output relationship and its unconditional pairwise error probability (UPEP). Then, its BER upper bound is derived in closed form under both ideal and imperfect channel estimation conditions, which is shown to be tight at moderate to high signal-to-noise ratios (SNRs). Moreover, a novel approximate message passing (AMP) aided OTSM detection framework is proposed. Specifically, to circumvent the high residual BER of the conventional AMP detector, we proposed a vector AMP-based expectation-maximization (VAMP-EM) detector for performing joint data detection and noise variance estimation. The variance auto-tuning algorithm based on the EM algorithm is designed for the VAMP-EM detector to further improve the convergence performance. The simulation results illustrate that the VAMP-EM detector is capable of striking an attractive BER vs. complexity trade-off than the state-of-the-art schemes as well as providing a better convergence. Finally, we propose AMP and VAMP-EM turbo receivers for low-density parity-check (LDPC)-coded OTSM systems. It is demonstrated that our proposed VAMP-EM turbo receiver is capable of providing both BER and convergence performance improvements over the conventional AMP solution.

cs.IT↗

arXiv2023

Goal-oriented Tensor: Beyond Age of Information Towards Semantics-Empowered Goal-Oriented Communications

Optimizations premised on open-loop metrics such as Age of Information (AoI) indirectly enhance the system's decision-making utility. We therefore propose a novel closed-loop metric named Goal-oriented Tensor (GoT) to directly quantify the impact of semantic mismatches on goal-oriented decision-making utility. Leveraging the GoT, we consider a sampler & decision-maker pair that works collaboratively and distributively to achieve a shared goal of communications. We formulate a two-agent infinite-horizon Decentralized Partially Observable Markov Decision Process (Dec-POMDP) to conjointly deduce the optimal deterministic sampling policy and decision-making policy. To circumvent the curse of dimensionality in obtaining an optimal deterministic joint policy through Brute-Force-Search, a sub-optimal yet computationally efficient algorithm is developed. This algorithm is predicated on the search for a Nash Equilibrium between the sampler and the decision-maker. Simulation results reveal that the proposed sampler & decision-maker co-design surpasses the current literature on AoI and its variants in terms of both goal achievement utility and sparse sampling rate, signifying progress in the semantics-conscious, goal-driven sparse sampling design.

cs.IT↗

arXiv2023

Goal-oriented Tensor: Beyond AoI Towards Semantics-Empowered Goal-oriented Communications

The intricate interplay of source dynamics, unreliable channels, and staleness of information has long been recognized as a significant impediment for the receiver to achieve accurate, timely, and most importantly, goal-oriented decision making. Thus, a plethora of promising metrics, such as Age of Information, Value of Information, and Mean Square Error, have emerged to quantify these underlying adverse factors. Following this avenue, optimizing these metrics has indirectly improved the utility of goal-oriented decision making. Nevertheless, no metric has hitherto been expressly devised to evaluate the utility of a goal-oriented decision-making process. To this end, this paper investigates a novel performance metric, the Goal-oriented Tensor (GoT), to directly quantify the impact of semantic mismatches on the goal-oriented decision making. Based on the GoT, we consider a sampler-decision maker pair that work collaboratively and distributively to achieve a shared goal of communications. We formulate an infinite-horizon Decentralized Partially Observable Markov Decision Process (Dec-POMDP) to conjointly deduce the optimal deterministic sampling policy and decision-making policy. The simulation results reveal that the sampler-decision maker co-design surpasses the current literature on AoI and its variants in terms of both goal achievement utility and sparse sampling rate, signifying a notable accomplishment for a sparse sampler and goal-oriented decision maker co-design.

cs.IT↗

arXiv2023

Deep Reinforcement Learning for Distributed Dynamic Coordinated Beamforming in Massive MIMO Cellular Networks

To accommodate the explosive wireless traffics, massive multiple-input multiple-output (MIMO) is regarded as one of the key enabling technologies for next-generation communication systems. In massive MIMO cellular networks, coordinated beamforming (CBF), which jointly designs the beamformers of multiple base stations (BSs), is an efficient method to enhance the network performance. In this paper, we investigate the sum rate maximization problem in a massive MIMO mobile cellular network, where in each cell a multi-antenna BS serves multiple mobile users simultaneously via downlink beamforming. Although existing optimization-based CBF algorithms can provide near-optimal solutions, they require realtime and global channel state information (CSI), in addition to their high computation complexity. It is almost impossible to apply them in practical wireless networks, especially highly dynamic mobile cellular networks. Motivated by this, we propose a deep reinforcement learning based distributed dynamic coordinated beamforming (DDCBF) framework, which enables each BS to determine the beamformers with only local CSI and some historical information from other BSs.Besides, the beamformers can be calculated with a considerably lower computational complexity by exploiting neural networks and expert knowledge, i.e., a solution structure observed from the iterative procedure of the weighted minimum mean square error (WMMSE) algorithm. Moreover, we provide extensive numerical simulations to validate the effectiveness of the proposed DRL-based approach. With lower computational complexity and less required information, the results show that the proposed approach can achieve comparable performance to the centralized iterative optimization algorithms.

cs.IT↗

arXiv2023

Semantic Information Marketing in The Metaverse: A Learning-Based Contract Theory Framework

In this paper, we address the problem of designing incentive mechanisms by a virtual service provider (VSP) to hire sensing IoT devices to sell their sensing data to help creating and rendering the digital copy of the physical world in the Metaverse. Due to the limited bandwidth, we propose to use semantic extraction algorithms to reduce the delivered data by the sensing IoT devices. Nevertheless, mechanisms to hire sensing IoT devices to share their data with the VSP and then deliver the constructed digital twin to the Metaverse users are vulnerable to adverse selection problem. The adverse selection problem, which is caused by information asymmetry between the system entities, becomes harder to solve when the private information of the different entities are multi-dimensional. We propose a novel iterative contract design and use a new variant of multi-agent reinforcement learning (MARL) to solve the modelled multi-dimensional contract problem. To demonstrate the effectiveness of our algorithm, we conduct extensive simulations and measure several key performance metrics of the contract for the Metaverse. Our results show that our designed iterative contract is able to incentivize the participants to interact truthfully, which maximizes the profit of the VSP with minimal individual rationality (IR) and incentive compatibility (IC) violation rates. Furthermore, the proposed learning-based iterative contract framework has limited access to the private information of the participants, which is to the best of our knowledge, the first of its kind in addressing the problem of adverse selection in incentive mechanisms.

cs.AI↗

arXiv2023

SenseFi: A Library and Benchmark on Deep-Learning-Empowered WiFi Human Sensing

WiFi sensing has been evolving rapidly in recent years. Empowered by propagation models and deep learning methods, many challenging applications are realized such as WiFi-based human activity recognition and gesture recognition. However, in contrast to deep learning for visual recognition and natural language processing, no sufficiently comprehensive public benchmark exists. In this paper, we review the recent progress on deep learning enabled WiFi sensing, and then propose a benchmark, SenseFi, to study the effectiveness of various deep learning models for WiFi sensing. These advanced models are compared in terms of distinct sensing tasks, WiFi platforms, recognition accuracy, model size, computational complexity, feature transferability, and adaptability of unsupervised learning. It is also regarded as a tutorial for deep learning based WiFi sensing, starting from CSI hardware platform to sensing algorithms. The extensive experiments provide us with experiences in deep model design, learning strategy skills and training techniques for real-world applications. To the best of our knowledge, this is the first benchmark with an open-source library for deep learning in WiFi sensing research. The benchmark codes are available at https://github.com/xyanchen/WiFi-CSI-Sensing-Benchmark.

cs.LG↗

arXiv2023

Achieving Covert Communication in Large-Scale SWIPT-Enabled D2D Networks

We aim to secure a large-scale device-to-device (D2D) network against adversaries. The D2D network underlays a downlink cellular network to reuse the cellular spectrum and is enabled for simultaneous wireless information and power transfer (SWIPT). In the D2D network, the transmitters communicate with the receivers, and the receivers extract information and energy from their received radio-frequency (RF) signals. In the meantime, the adversaries aim to detect the D2D transmission. The D2D network applies power control and leverages the cellular signal to achieve covert communication (i.e., hide the presence of transmissions) so as to defend against the adversaries. We model the interaction between the D2D network and adversaries by using a two-stage Stackelberg game. Therein, the adversaries are the followers minimizing their detection errors at the lower stage and the D2D network is the leader maximizing its network utility constrained by the communication covertness and power outage at the upper stage. Both power splitting (PS)-based and time switch (TS)-based SWIPT schemes are explored. We characterize the spatial configuration of the large-scale D2D network, adversaries, and cellular network by stochastic geometry. We analyze the adversary's detection error minimization problem and adopt the Rosenbrock method to solve it, where the obtained solution is the best response from the lower stage. Taking into account the best response from the lower stage, we develop a bi-level algorithm to solve the D2D network's constrained network utility maximization problem and obtain the Stackelberg equilibrium. We present numerical results to reveal interesting insights.

cs.IT↗

arXiv2022

AirFi: Empowering WiFi-based Passive Human Gesture Recognition to Unseen Environment via Domain Generalization

WiFi-based smart human sensing technology enabled by Channel State Information (CSI) has received great attention in recent years. However, CSI-based sensing systems suffer from performance degradation when deployed in different environments. Existing works solve this problem by domain adaptation using massive unlabeled high-quality data from the new environment, which is usually unavailable in practice. In this paper, we propose a novel augmented environment-invariant robust WiFi gesture recognition system named AirFi that deals with the issue of environment dependency from a new perspective. The AirFi is a novel domain generalization framework that learns the critical part of CSI regardless of different environments and generalizes the model to unseen scenarios, which does not require collecting any data for adaptation to the new environment. AirFi extracts the common features from several training environment settings and minimizes the distribution differences among them. The feature is further augmented to be more robust to environments. Moreover, the system can be further improved by few-shot learning techniques. Compared to state-of-the-art methods, AirFi is able to work in different environment settings without acquiring any CSI data from the new environment. The experimental results demonstrate that our system remains robust in the new environment and outperforms the compared systems.

cs.CV↗