Searcharxiv⌕ Search

arXiv subjects

Sundeep Rangan

Publications and source records attributed to Sundeep Rangan.

At least 127 records · Page 7Linked to original sources

Inference for Generalized Linear Models via Alternating Directions and Bethe Free Energy Minimization

Generalized Linear Models (GLMs), where a random vector $\mathbf{x}$ is observed through a noisy, possibly nonlinear, function of a linear transform $\mathbf{z}=\mathbf{Ax}$ arise in a range of applications in nonlinear filtering and regression. Approximate Message Passing (AMP) methods, based on loopy belief propagation, are a promising class of approaches for approximate inference in these models. AMP methods are computationally simple, general, and admit precise analyses with testable conditions for optimality for large i.i.d. transforms $\mathbf{A}$. However, the algorithms can easily diverge for general $\mathbf{A}$. This paper presents a convergent approach to the generalized AMP (GAMP) algorithm based on direct minimization of a large-system limit approximation of the Bethe Free Energy (LSL-BFE). The proposed method uses a double-loop procedure, where the outer loop successively linearizes the LSL-BFE and the inner loop minimizes the linearized LSL-BFE using the Alternating Direction Method of Multipliers (ADMM). The proposed method, called ADMM-GAMP, is similar in structure to the original GAMP method, but with an additional least-squares minimization. It is shown that for strictly convex, smooth penalties, ADMM-GAMP is guaranteed to converge to a local minima of the LSL-BFE, thus providing a convergent alternative to GAMP that is stable under arbitrary transforms. Simulations are also presented that demonstrate the robustness of the method for non-convex penalties as well.

cs.IT↗

Hybrid Spectrum Access for mmWave Networks

While spectrum at millimeter wave (mmWave) frequencies is less scarce than at traditional frequencies below 6 GHz, still it is not unlimited, in particular if we consider the requirements from other services using the same band and the need to license mmWave bands to multiple mobile operators. Therefore, an efficient spectrum access scheme is critical to harvest the maximum benefit from emerging mmWave technologies. In this paper, motivated by previous results where spectrum pooling was proved to be more feasible at high mmWave frequencies, we study the performance of a hybrid spectrum scheme where exclusive access is used at frequencies in the 20/30 GHz range while spectrum pooling/unlicensed spectrum is used at frequencies around 70 GHz. Our preliminary results show that hybrid spectrum access is a promising approach for mmWave networks, and motivate further studies to achieve a more complete understanding of both technical and non technical implications.

cs.NI↗

Comparative Analysis of Initial Access Techniques in 5G mmWave Cellular Networks

The millimeter wave frequencies (roughly above 10 GHz) offer the availability of massive bandwidth to greatly increase the capacity of fifth generation (5G) cellular wireless systems. However, to overcome the high isotropic pathloss at these frequencies, highly directional transmissions will be required at both the base station (BS) and the mobile user equipment (UE) to establish sufficient link budget in wide area networks. This reliance on directionality has important implications for control layer procedures. Initial access in particular can be significantly delayed due to the need for the BS and the UE to find the initial directions of transmission. This paper provides a survey of several recently proposed techniques. Detection probability and delay analysis is performed to compare various techniques including exhaustive and iterative search. We show that the optimal strategy depends on the target SNR regime.

cs.NI↗

Multi-Connectivity in 5G mmWave Cellular Networks

The millimeter wave (mmWave) frequencies offer the potential of orders of magnitude increases in capacity for next-generation cellular wireless systems. However, links in mmWave networks are highly susceptible to blocking and may suffer from rapid variations in quality. Connectivity to multiple cells - both in the mmWave and in the traditional lower frequencies - is thus considered essential for robust connectivity. However, one of the challenges in supporting multi-connectivity in the mmWave space is the requirement for the network to track the direction of each link in addition to its power and timing. With highly directional beams and fast varying channels, this directional tracking may be the main bottleneck in realizing robust mmWave networks. To address this challenge, this paper proposes a novel measurement system based on (i) the UE transmitting sounding signals in directions that sweep the angular space, (ii) the mmWave cells measuring the instantaneous received signal strength along with its variance to better capture the dynamics and, consequently, the reliability of a channel/direction and, finally, (iii) a centralized controller making handover and scheduling decisions based on the mmWave cell reports and transmitting the decisions either via a mmWave cell or conventional microwave cell (when control signaling paths are not available). We argue that the proposed scheme enables efficient and highly adaptive cell selection in the presence of the channel variability expected at mmWave frequencies.

cs.NI↗

Understanding Noise and Interference Regimes in 5G Millimeter-Wave Cellular Networks

With the severe spectrum shortage in conventional cellular bands, millimeter-wave (mmWave) frequencies have been attracting growing attention for next-generation micro- and picocellular wireless networks. A fundamental and open question is whether mmWave cellular networks are likely to be noise- or interference-limited. Identifying in which regime a network is operating is critical for the design of MAC and physical-layer procedures and to provide insights on how transmissions across cells should be coordinated to cope with interference. This work uses the latest measurement-based statistical channel models to accurately assess the Interference-to-Noise Ratio (INR) in a wide range of deployment scenarios. In addition to cell density, we also study antenna array size and antenna patterns, whose effects are critical in the mmWave regime. The channel models also account for blockage, line-of-sight and non-line-of-sight regimes as well as local scattering, that significantly affect the level of spatial isolation.

cs.NI↗

Channel Dynamics and SNR Tracking in Millimeter Wave Cellular Systems

The millimeter wave (mmWave) frequencies are likely to play a significant role in fifth-generation (5G) cellular systems. A key challenge in developing systems in these bands is the potential for rapid channel dynamics: since mmWave signals are blocked by many materials, small changes in the position or orientation of the handset relative to objects in the environment can cause large swings in the channel quality. This paper addresses the issue of tracking the signal to noise ratio (SNR), which is an essential procedure for rate prediction, handover and radio link failure detection. A simple method for estimating the SNR from periodic synchronization signals is considered. The method is then evaluated using real experiments in common blockage scenarios combined with outdoor statistical models.

cs.NI↗

Transport Layer Performance in 5G mmWave Cellular

The millimeter wave (mmWave) bands are likely to play a significant role in next generation cellular systems due to the possibility of very high throughput thanks to the availability of massive bandwidth and high-dimensional antennas. Especially in Non-Line-of-Sight conditions, significant variations in the received RF power can occur as a result of the scattering from nearby building and terrain surfaces. Scattering objects come and go as the user moves through the local environment. At the higher end of the mmWave band, rough surface scatter generates cluster-based small-scale fading, where signal levels can vary by more than 20 dB over just a few wavelengths. This high level of channel variability may present significant challenges for congestion control. Using our recently developed end-to-end mmWave ns3-based framework, this paper presents the first performance evaluation of TCP congestion control in next-generation mmWave networks. Importantly, the framework can incorporate detailed models of the mmWave channel, beam- forming and tracking algorithms, and builds on statistical channel models derived from real measurements in New York City, as well as detailed ray traces.

cs.IT↗

Resource Sharing in 5G mmWave Cellular Networks

In this paper, we discuss resource sharing, a key dimension in mmWave network design in which spectrum, access and/or network infrastructure resources can be shared by multiple operators. It is argued that this sharing paradigm will be essential to fully exploit the tremendous amounts of bandwidth and the large number of antenna degrees of freedom available in these bands, and to provide statistical multiplexing to accommodate the highly variable nature of the traffic. In this paper, we investigate and compare various sharing configurations in order to capture the enhanced potential of mmWave communications. Our results reflect both the technical and the economical aspects of the various sharing paradigms. We deliver a number of key insights, corroborated by detailed simulations, which include an analysis of the effects of the distinctive propagation characteristics of the mmWave channel, along with a rigorous multi-antenna characterization. Key findings of this study include (i) the strong dependence of the comparative results on channel propagation and antenna characteristics, and therefore the need to accurately model them, and (ii) the desirability of a full spectrum and infrastructure sharing configuration, which may result in increased user rate as well as in economical advantages for both service provider.

cs.IT↗

The Potential of Resource Sharing in 5G Millimeter-Wave Bands

With the severe spectrum shortage in conventional cellular bands, the millimeter (mmWave) frequencies, roughly above 10~GHz, have been attracting growing attention for next-generation micro- and pico- cellular wireless networks. A fundamental and open question is how these bands should be used by cellular operators. Cellular spectrum has been traditionally allocated following an exclusive ownership model. However, in this paper we argue that the distinct nature of mmWave communication -- the massive bandwidth degrees of freedom, directional isolation and high susceptibility to blockage -- suggest that spectrum and infrastructure sharing between multiple operators may be necessary to exploit the full potential of these bands. High-level capacity analyses are presented that reveal significant possible gains under spectrum and infrastructure sharing, even under minimal coordination between operators. Moreover, we discuss how network technologies including software defined networks (SDNs) and network function virtualization (NFV) can easily enable resource sharing by having a programmable core entity provide transparent inter-operator access to the end user.

cs.NI↗

Propagation Path Loss Models for 5G Urban Micro- and Macro-Cellular Scenarios

This paper presents and compares two candidate large-scale propagation path loss models, the alpha-beta-gamma (ABG) model and the close-in (CI) free space reference distance model, for the design of fifth generation (5G) wireless communication systems in urban micro- and macro-cellular scenarios. Comparisons are made using the data obtained from 20 propagation measurement campaigns or ray-tracing studies from 2 GHz to 73.5 GHz over distances ranging from 5 m to 1429 m. The results show that the one-parameter CI model has a very similar goodness of fit (i.e., the shadow fading standard deviation) in both line-of-sight and non-line-of-sight environments, while offering substantial simplicity and more stable behavior across frequencies and distances, as compared to the three-parameter ABG model. Additionally, the CI model needs only one very subtle and simple modification to the existing 3GPP floating-intercept path loss model (replacing a constant with a close-in free space reference value) in order to provide greater simulation accuracy, more simplicity, better repeatability across experiments, and higher stability across a vast range of frequencies.

cs.IT↗

Achieving Ultra-Low Latency in 5G Millimeter Wave Cellular Networks

The IMT 2020 requirements of 20 Gbps peak data rate and 1 millisecond latency present significant engineering challenges for the design of 5G cellular systems. Use of the millimeter wave (mmWave) bands above 10 GHz --- where vast quantities of spectrum are available --- is a promising 5G candidate that may be able to rise to the occasion. However, while the mmWave bands can support massive peak data rates, delivering these data rates on end-to-end service while maintaining reliability and ultra-low latency performance will require rethinking all layers of the protocol stack. This papers surveys some of the challenges and possible solutions for delivering end-to-end, reliable, ultra-low latency services in mmWave cellular systems in terms of the Medium Access Control (MAC) layer, congestion control and core network architecture.

cs.NI↗

An Overview of Signal Processing Techniques for Millimeter Wave MIMO Systems

Communication at millimeter wave (mmWave) frequencies is defining a new era of wireless communication. The mmWave band offers higher bandwidth communication channels versus those presently used in commercial wireless systems. The applications of mmWave are immense: wireless local and personal area networks in the unlicensed band, 5G cellular systems, not to mention vehicular area networks, ad hoc networks, and wearables. Signal processing is critical for enabling the next generation of mmWave communication. Due to the use of large antenna arrays at the transmitter and receiver, combined with radio frequency and mixed signal power constraints, new multiple-input multiple-output (MIMO) communication signal processing techniques are needed. Because of the wide bandwidths, low complexity transceiver algorithms become important. There are opportunities to exploit techniques like compressed sensing for channel estimation and beamforming. This article provides an overview of signal processing challenges in mmWave wireless systems, with an emphasis on those faced by using MIMO communication at higher carrier frequencies.

cs.IT↗

Iterative Reconstruction of Rank-One Matrices in Noise

We consider the problem of estimating a rank-one matrix in Gaussian noise under a probabilistic model for the left and right factors of the matrix. The probabilistic model can impose constraints on the factors including sparsity and positivity that arise commonly in learning problems. We propose a family of algorithms that reduce the problem to a sequence of scalar estimation computations. These algorithms are similar to approximate message passing techniques based on Gaussian approximations of loopy belief propagation that have been used recently in compressed sensing. Leveraging analysis methods by Bayati and Montanari, we show that the asymptotic behavior of the algorithm is described by a simple scalar equivalent model, where the distribution of the estimates at each iteration is identical to certain scalar estimates of the variables in Gaussian noise. Moreover, the effective Gaussian noise level is described by a set of state evolution equations. The proposed approach to deriving algorithms thus provides a computationally simple and general method for rank-one estimation problems with a precise analysis in certain high-dimensional settings.

cs.IT↗

5G mmWave Module for ns-3 Network Simulator

The increasing demand of data, along with the spectrum scarcity, are motivating a urgent shift towards exploiting new bands. This is the main reason behind identifying mmWaves as the key disruptive enabling technology for 5G cellular networks. Indeed, utilizing new bands means facing new challenges; in this context, they are mainly related to the radio propagation, which is shorter in range and more sensitive to obstacles. The resulting key aspects that need to be taken into account when designing mmWave cellular systems are directionality and link intermittency. The lack of network level results motivated this work, which aims at providing the first of a kind open source mmWave framework, based on the network simulator ns-3. The main focus of this work is the modeling of customizable channel, physical (PHY) and medium access control (MAC) layers for mmWave systems. The overall design and architecture of the model are discussed in details. Finally, the validity of our proposed framework is corroborated through the simulation of a simple scenario.

cs.NI↗

Dynamic Time-domain Duplexing for Self-backhauled Millimeter Wave Cellular Networks

Millimeter wave (mmW) bands between 30 and 300 GHz have attracted considerable attention for next-generation cellular networks due to vast quantities of available spectrum and the possibility of very high-dimensional antenna ar-rays. However, a key issue in these systems is range: mmW signals are extremely vulnerable to shadowing and poor high-frequency propagation. Multi-hop relaying is therefore a natural technology for such systems to improve cell range and cell edge rates without the addition of wired access points. This paper studies the problem of scheduling for a simple infrastructure cellular relay system where communication between wired base stations and User Equipment follow a hierarchical tree structure through fixed relay nodes. Such a systems builds naturally on existing cellular mmW backhaul by adding mmW in the access links. A key feature of the proposed system is that TDD duplexing selections can be made on a link-by-link basis due to directional isolation from other links. We devise an efficient, greedy algorithm for centralized scheduling that maximizes network utility by jointly optimizing the duplexing schedule and resources allocation for dense, relay-enhanced OFDMA/TDD mmW networks. The proposed algorithm can dynamically adapt to loading, channel conditions and traffic demands. Significant throughput gains and improved resource utilization offered by our algorithm over the static, globally-synchronized TDD patterns are demonstrated through simulations based on empirically-derived channel models at 28 GHz.

cs.NI↗

Directional Cell Discovery in Millimeter Wave Cellular Networks

The acute disparity between increasing bandwidth demand and available spectrum, has brought millimeter wave (mmW) bands to the forefront of candidate solutions for the next-generation cellular networks. Highly directional transmissions are essential for cellular communication in these frequencies to compensate for high isotropic path loss. This reliance on directional beamforming, however, complicates initial cell search since the mobile and base station must jointly search over a potentially large angular directional space to locate a suitable path to initiate communication. To address this problem, this paper proposes a directional cell discovery procedure where base stations periodically transmit synchronization signals, potentially in time-varying random directions, to scan the angular space. Detectors for these signals are derived based on a Generalized Likelihood Ratio Test (GLRT) under various signal and receiver assumptions. The detectors are then simulated under realistic design parameters and channels based on actual experimental measurements at 28~GHz in New York City. The study reveals two key findings: (i) digital beamforming can significantly outperform analog beamforming even when the digital beamforming uses very low quantization to compensate for the additional power requirements; and (ii) omni-directional transmissions of the synchronization signals from the base station generally outperforms random directional scanning.

cs.IT↗

HARQ Buffer Management: An Information-Theoretic View

A key practical constraint on the design of Hybrid automatic repeat request (HARQ) schemes is the size of the on-chip buffer that is available at the receiver to store previously received packets. In fact, in modern wireless standards such as LTE and LTE-A, the HARQ buffer size is one of the main drivers of the modem area and power consumption. This has recently highlighted the importance of HARQ buffer management, that is, of the use of buffer-aware transmission schemes and of advanced compression policies for the storage of received data. This work investigates HARQ buffer management by leveraging information-theoretic achievability arguments based on random coding. Specifically, standard HARQ schemes, namely Type-I, Chase Combining and Incremental Redundancy, are first studied under the assumption of a finite-capacity HARQ buffer by considering both coded modulation, via Gaussian signaling, and Bit Interleaved Coded Modulation (BICM). The analysis sheds light on the impact of different compression strategies, namely the conventional compression log-likelihood ratios and the direct digitization of baseband signals, on the throughput. Then, coding strategies based on layered modulation and optimized coding blocklength are investigated, highlighting the benefits of HARQ buffer-aware transmission schemes. The optimization of baseband compression for multiple-antenna links is also studied, demonstrating the optimality of a transform coding approach.

cs.IT↗

Low Power Analog-to-Digital Conversion in Millimeter Wave Systems: Impact of Resolution and Bandwidth on Performance

The wide bandwidth and large number of antennas used in millimeter wave systems put a heavy burden on the power consumption at the receiver. In this paper, using an additive quantization noise model, the effect of analog-digital conversion (ADC) resolution and bandwidth on the achievable rate is investigated for a multi-antenna system under a receiver power constraint. Two receiver architectures, analog and digital combining, are compared in terms of performance. Results demonstrate that: (i) For both analog and digital combining, there is a maximum bandwidth beyond which the achievable rate decreases; (ii) Depending on the operating regime of the system, analog combiner may have higher rate but digital combining uses less bandwidth when only ADC power consumption is considered, (iii) digital combining may have higher rate when power consumption of all the components in the receiver front-end are taken into account.

cs.IT↗