arXiv subjects

Sung-Kwan Mo

Publications and source records attributed to Sung-Kwan Mo.

At least 73 records · Page 4Linked to original sources

arXiv2018

Observation of Topologically Protected States at Crystalline Phase Boundaries in Single-layer WSe2

Transition metal dichalcogenide (TMD) materials are unique in the wide variety of structural and electronic phases they exhibit in the two-dimensional (2D) single-layer limit. Here we show how such polymorphic flexibility can be used to achieve topological states at highly ordered phase boundaries in a new quantum spin Hall insulator (QSHI), 1T'-WSe2. We observe helical states at the crystallographically-aligned interface between quantum a spin Hall insulating domain of 1T'-WSe2 and a semiconducting domain of 1H-WSe2 in contiguous single layers grown using molecular beam epitaxy (MBE). The QSHI nature of single-layer 1T'-WSe2 was verified using ARPES to determine band inversion around a 120 meV energy gap, as well as STM spectroscopy to directly image helical edge-state formation. Using this new edge-state geometry we are able to directly confirm the predicted penetration depth of a helical interface state into the 2D bulk of a QSHI for a well-specified crystallographic direction. The clean, well-ordered topological/trivial interfaces observed here create new opportunities for testing predictions of the microscopic behavior of topologically protected boundary states without the complication of structural disorder.

cond-mat.mtrl-sci↗

arXiv2018

Gapped Nearly Free-Standing Graphene on an SiC(0001) Substrate Induced by Manganese Atoms

The electron band structure of manganese-adsorbed graphene on an SiC(0001) substrate has been studied using angle-resolved photoemission spectroscopy. Upon introducing manganese atoms, the conduction band of graphene completely disappears and the valence band maximum is observed at 0.4 eV below Fermi energy. At the same time, the slope of the valence band decreases, approaching the electron band structure calculated using the local density approximation method. While the former provides experimental evidence of the formation of nearly free-standing graphene on an SiC substrate, concomitant with a metal-to-insulator transition, the latter suggests that its electronic correlations can be modified by foreign atoms. These results pave the way for promising device applications using graphene that is semiconducting and charge neutral.

cond-mat.mtrl-sci↗

arXiv2018

Emergence of Kondo resonance in graphene intercalated with cerium

The interaction between a magnetic impurity, such as cerium (Ce) atom, and surrounding electrons has been one of the core problems in understanding many-body interaction in solid and its relation to magnetism. Kondo effect, the formation of a new resonant ground state with quenched magnetic moment, provides a general framework to describe many-body interaction in the presence of magnetic impurity. In this Letter, a combined study of angle-resolved photoemission (ARPES) and dynamic mean-field theory (DMFT) on Ce-intercalated graphene shows that Ce-induced localized states near Fermi energy, $E_{\rm F}$, hybridized with the graphene $π$ band, exhibit gradual increase in spectral weight upon decreasing temperature. The observed temperature dependence follows the expectations from the Kondo picture in the weak coupling limit. Our results provide a novel insight how Kondo physics emerges in the sea of two-dimensional Dirac electrons.

cond-mat.str-el↗

arXiv2018

Experimental and Theoretical Electronic Structure and Symmetry Effects in Ultrathin NbSe2 Films

Layered quasi-two-dimensional transition metal dichalcogenides (TMDCs), which can be readily made in ultrathin films, offer excellent opportunities for studying how dimensionality affects electronic structure and physical properties. Among all TMDCs, NbSe2 is of special interest; bulk NbSe2 hosts a charge-density-wave phase at low temperatures and has the highest known superconducting transition temperature, and these properties can be substantially modified in the ultrathin film limit. Motivated by these effects, we report herein a study of few-layer NbSe2 films, with a well-defined single-domain orientation, epitaxially grown on Gallium Arsenide (GaAs). Angle-resolved photoemission spectroscopy (ARPES) was used to determine the electronic band structure and the Fermi surface as a function of layer thickness; first-principles band structure calculations were performed for comparison. The results show interesting changes as the film thickness increases from a monolayer (ML) to several layers. The most notable changes occur between a ML and a bilayer, where the inversion symmetry in bulk NbSe2 is preserved in the bilayer but not in the ML. The results illustrate some basic dimensional effects and provide a basis for further exploring and understanding the properties of NbSe2.

cond-mat.mes-hall↗

arXiv2017

Gapped Electronic Structure of Epitaxial Stanene on InSb(111)

Stanene (single-layer grey tin), with an electronic structure akin to that of graphene but exhibiting a much larger spin-orbit gap, offers a promising platform for room-temperature electronics based on the quantum spin Hall (QSH) effect. This material has received much theoretical attention, but a suitable substrate for stanene growth that results in an overall gapped electronic structure has been elusive; a sizable gap is necessary for room-temperature applications. Here, we report a study of stanene epitaxially grown on the (111)B-face of indium antimonide (InSb). Angle-resolved photoemission spectroscopy (ARPES) measurements reveal a gap of 0.44 eV, in agreement with our first-principles calculations. The results indicate that stanene on InSb(111) is a strong contender for electronic QSH applications.

cond-mat.mtrl-sci↗

arXiv2017

Temperature-Dependent Electron-Electron Interaction in Graphene on SrTiO3

The electron band structure of graphene on SrTiO3 substrate has been investigated as a function of temperature. The high-resolution angle-resolved photoemission study reveals that the spectral width at Fermi energy and the Fermi velocity of graphene on SrTiO3 are comparable to those of graphene on a BN substrate. Near the charge neutrality, the energy-momentum dispersion of graphene exhibits a strong deviation from the well-known linearity, which is magnified as temperature decreases. Such modification resembles the characteristics of enhanced electron-electron interaction. Our results not only suggest that SrTiO3 can be a plausible candidate as a substrate material for applications in graphene-based electronics, but also provide a possible route towards the realization of a new type of strongly correlated electron phases in the prototypical two-dimensional system via the manipulation of temperature and a proper choice of dielectric substrates.

cond-mat.mtrl-sci↗

arXiv2017

Hole doping, hybridization gap, and electronic correlation in graphene on a platinum substrate

The interaction between graphene and substrates provides a viable routes to enhance functionality of both materials. Depending on the nature of electronic interaction at the interface, the electron band structure of graphene is strongly influenced, allowing us to make use the intrinsic properties of graphene or to design additional functionality in graphene. Here, we present an angle-resolved photoemission study on the interaction between graphene and a platinum substrate. The formation of an interface between graphene and platinum leads to a strong deviation in the electronic structure of graphene not only from its freestanding form but also from the behavior observed on typical metals. The combined study on the experimental and theoretical electron band structure unveils the unique electronic properties of graphene on a platinum substrate, which singles out graphene/platinum as a model system investigating graphene on a metallic substrate with strong interaction.

cond-mat.mtrl-sci↗

arXiv2017

Elemental topological Dirac semimetal: α-Sn on InSb(111)

Three-dimensional (3D) topological Dirac semimetals (TDSs) are rare but important as a versatile platform for exploring exotic electronic properties and topological phase transitions. A quintessential feature of TDSs is 3D Dirac fermions associated with bulk electronic states near the Fermi level. Using angle-resolved photoemission spectroscopy (ARPES), we have observed such bulk Dirac cones in epitaxially-grown α-Sn films on InSb(111), the first such TDS system realized in an elemental form. First-principles calculations confirm that epitaxial strain is key to the formation of the TDS phase. A phase diagram is established that connects the 3D TDS phase through a singular point of a zero-gap semimetal phase to a topological insulator (TI) phase. The nature of the Dirac cone crosses over from 3D to 2D as the film thickness is reduced.

cond-mat.mtrl-sci↗

arXiv2017

Realization of Quantum Spin Hall State in Monolayer 1T'-WTe2

A quantum spin Hall (QSH) insulator is a novel two-dimensional quantum state of matter that features quantized Hall conductance in the absence of magnetic field, resulting from topologically protected dissipationless edge states that bridge the energy gap opened by band inversion and strong spin-orbit coupling. By investigating electronic structure of epitaxially grown monolayer 1T'-WTe2 using angle-resolved photoemission (ARPES) and first principle calculations, we observe clear signatures of the topological band inversion and the band gap opening, which are the hallmarks of a QSH state. Scanning tunneling microscopy measurements further confirm the correct crystal structure and the existence of a bulk band gap, and provide evidence for a modified electronic structure near the edge that is consistent with the expectations for a QSH insulator. Our results establish monolayer 1T'-WTe2 as a new class of QSH insulator with large band gap in a robust two-dimensional materials family of transition metal dichalcogenides (TMDCs).

cond-mat.mtrl-sci↗

arXiv2016

ARPES study of the epitaxially grown topological crystalline insulator SnTe(111)

SnTe is a prototypical topological crystalline insulator, in which the gapless surface state is protected by a crystal symmetry. The hallmark of the topological properties in SnTe is the Dirac cones projected to the surfaces with mirror symmetry, stemming from the band inversion near the L points of its bulk Brillouin zone, which can be measured by angle-resolved photoemission. We have obtained the (111) surface of SnTe film by molecular beam epitaxy on BaF2(111) substrate. Photon-energy-dependence of in situ angle-resolved photoemission, covering multiple Brillouin zones in the direction perpendicular tothe (111) surface, demonstrate the projected Dirac cones at the Gamma_bar and M_bar points of the surface Brillouinzone. In addition, we observe a Dirac-cone-like band structure at the Gamma point of the bulk Brillouin zone,whose Dirac energy is largely different from those at the Gamma_bar and M_bar points.

cond-mat.mtrl-sci↗

arXiv2016

Non-rigid band shift and non-monotonic electronic structure changes upon doping in the normal state of the pnictide high temperature superconductor Ba2(Fe1-xCox)2As2

We report systematic Angle Resolved Photoemission (ARPES) experiments using different photon polarizations and experimental geometries and find that the doping evolution of the normal state of Ba(Fe1-xCox)2As2 deviates significantly from the predictions of a rigid band model. The data reveal a non-monotonic dependence upon doping of key quantities such as band filling, bandwidth of the electron pocket, and quasiparticle coherence. Our analysis suggests that the observed phenomenology and the inapplicability of the rigid band model in Co-doped Ba122 are due to electronic correlations, and not to either the size of the impurity potential, or self-energy effects due to impurity scattering. Our findings indicate that the effects of doping in pnictides are much more complicated than currently believed. More generally, they indicate that a deep understanding of the evolution of the electronic properties of the normal state, which requires an understanding of the doping process, remains elusive even for the 122 iron-pnictides, which are viewed as the least correlated of the high-TC unconventional superconductors.

cond-mat.supr-con↗

arXiv2016

Ubiquitous strong electron phonon coupling at the interface of FeSe/SrTiO3

The high temperature superconductivity in single-unit-cell (1UC) FeSe on SrTiO3 (STO)(001) and the observation of replica bands by angle-resolved photoemission spectroscopy (ARPES) have led to the conjecture that the coupling between FeSe electron and the STO phonon is responsible for the enhancement of Tc over other FeSe-based superconductors1,2. However the recent observation of a similar superconducting gap in FeSe grown on the (110) surface of STO raises the question of whether a similar mechanism applies3,4. Here we report the ARPES study of the electronic structure of FeSe grown on STO(110). Similar to the results in FeSe/STO(001), clear replica bands are observed. We also present a comparative study of STO (001) and STO(110) bare surfaces, where photo doping generates metallic surface states. Similar replica bands separating from the main band by approximately the same energy are observed, indicating this coupling is a generic feature of the STO surfaces and interfaces. Our findings suggest that the large superconducting gaps observed in FeSe films grown on two different STO surface terminations are likely enhanced by a common coupling between FeSe electrons and STO phonons.

cond-mat.supr-con↗

arXiv2016

Electronic Structure, Surface Doping, and Optical Response in Epitaxial WSe2 Thin Films

High quality WSe2 films have been grown on bilayer graphene (BLG) with layer-by-layer control of thickness using molecular beam epitaxy (MBE). The combination of angle-resolved photoemission (ARPES), scanning tunneling microscopy/spectroscopy (STM/STS), and optical absorption measurements reveal the atomic and electronic structures evolution and optical response of WSe2/BLG. We observe that a bilayer of WSe2 is a direct bandgap semiconductor, when integrated in a BLG-based heterostructure, thus shifting the direct-indirect band gap crossover to trilayer WSe2. In the monolayer limit, WSe2 shows a spin-splitting of 475 meV in the valence band at the K point, the largest value observed among all the MX2 (M = Mo, W; X = S, Se) materials. The exciton binding energy of monolayer-WSe2/BLG is found to be 0.21 eV, a value that is orders of magnitude larger than that of conventional 3D semiconductors, yet small as compared to other 2D transition metal dichalcogennides (TMDCs) semiconductors. Finally, our finding regarding the overall modification of the electronic structure by an alkali metal surface electron doping opens a route to further control the electronic properties of TMDCs.

cond-mat.mtrl-sci↗

arXiv2016

Observation of charge density wave order in 1D mirror twin boundaries of single-layer MoSe2

Properties of two-dimensional transition metal dichalcogenides are highly sensitive to the presence of defects in the crystal structure. A detailed understanding of defect structure may lead to control of material properties through defect engineering. Here we provide direct evidence for the existence of isolated, one-dimensional charge density waves at mirror twin boundaries in single-layer MoSe2. Our low-temperature scanning tunneling microscopy/spectroscopy measurements reveal a substantial bandgap of 60 - 140 meV opening at the Fermi level in the otherwise one dimensional metallic structure. We find an energy-dependent periodic modulation in the density of states along the mirror twin boundary, with a wavelength of approximately three lattice constants. The modulations in the density of states above and below the Fermi level are spatially out of phase, consistent with charge density wave order. In addition to the electronic characterization, we determine the atomic structure and bonding configuration of the one-dimensional mirror twin boundary by means of high-resolution non-contact atomic force microscopy. Density functional theory calculations reproduce both the gap opening and the modulations of the density of states.

cond-mat.mes-hall↗

arXiv2016

Observation of Unusual Topological Surface States in Half-Heusler Compounds LnPtBi (Ln=Lu, Y)

Topological quantum materials represent a new class of matter with both exotic physical phenomena and novel application potentials. Many Heusler compounds, which exhibit rich emergent properties such as unusual magnetism, superconductivity and heavy fermion behaviour, have been predicted to host non-trivial topological electronic structures. The coexistence of topological order and other unusual properties makes Heusler materials ideal platform to search for new topological quantum phases (such as quantum anomalous Hall insulator and topological superconductor). By carrying out angle-resolved photoemission spectroscopy (ARPES) and ab initio calculations on rare-earth half-Heusler compounds LnPtBi (Ln=Lu, Y), we directly observed the unusual topological surface states on these materials, establishing them as first members with non-trivial topological electronic structure in this class of materials. Moreover, as LnPtBi compounds are non-centrosymmetric superconductors, our discovery further highlights them as promising candidates of topological superconductors.

cond-mat.mtrl-sci↗

arXiv2015

Characterization of collective ground states in single-layer NbSe2

Layered transition metal dichalcogenides (TMDs) are ideal systems for exploring the effects of dimensionality on correlated electronic phases such as charge density wave (CDW) order and superconductivity. In bulk NbSe2 a CDW sets in at TCDW = 33 K and superconductivity sets in at Tc = 7.2 K. Below Tc these electronic states coexist but their microscopic formation mechanisms remain controversial. Here we present an electronic characterization study of a single 2D layer of NbSe2 by means of low temperature scanning tunneling microscopy/spectroscopy (STM/STS), angle-resolved photoemission spectroscopy (ARPES), and electrical transport measurements. We demonstrate that 3x3 CDW order in NbSe2 remains intact in 2D. Superconductivity also still remains in the 2D limit, but its onset temperature is depressed to 1.9 K. Our STS measurements at 5 K reveal a CDW gap of Δ = 4 meV at the Fermi energy, which is accessible via STS due to the removal of bands crossing the Fermi level for a single layer. Our observations are consistent with the simplified (compared to bulk) electronic structure of single-layer NbSe2, thus providing new insight into CDW formation and superconductivity in this model strongly-correlated system.

cond-mat.mes-hall↗

arXiv2015

Monolayer charge-neutral graphene on platinum with extremely weak electron-phonon coupling

Epitaxial growth of graphene on transition metal substrates is an important route for obtaining large scale graphene. However, the interaction between graphene and the substrate often leads to multiple orientations, distorted graphene band structure, large doping and strong electron-phonon coupling. Here we report the growth of monolayer graphene with high crystalline quality on Pt(111) substrate by using a very low concentration of an internal carbon source with high annealing temperature. The controlled growth leads to electronically decoupled graphene: it is nearly charge neutral and has extremely weak electron-phonon coupling (coupling strength $λ$ $\approx$ 0.056) as revealed by angle-resolved photoemission spectroscopic measurements. The thermodynamics and kinetics of the carbon diffusion process is investigated by DFT calculation. Such graphene with negligible graphene-substrate interaction provides an important platform for fundamental research as well as device applications when combined with a nondestructive sample transfer technique.

cond-mat.mtrl-sci↗

arXiv2015

Observation of universal strong orbital-dependent correlation effects in iron chalcogenides

Establishing the appropriate theoretical framework for unconventional superconductivity in the iron-based materials requires correct understanding of both the electron correlation strength and the role of Fermi surfaces. This fundamental issue becomes especially relevant with the discovery of the iron chalcogenide (FeCh) superconductors, the only iron-based family in proximity to an insulating phase. Here, we use angle-resolved photoemission spectroscopy (ARPES) to measure three representative FeCh superconductors, FeTe0.56Se0.44, K0.76Fe1.72Se2, and monolayer FeSe film grown on SrTiO3. We show that, these FeChs are all in a strongly correlated regime at low temperatures, with an orbital-selective strong renormalization in the dxy bands despite having drastically different Fermi-surface topologies. Furthermore, raising temperature brings all three compounds from a metallic superconducting state to a phase where the dxy orbital loses all spectral weight while other orbitals remain itinerant. These observations establish that FeChs display universal orbital-selective strong correlation behaviors that are insensitive to the Fermi surface topology, and are close to an orbital-selective Mott phase (OSMP), hence placing strong constraints for theoretical understanding of iron-based superconductors.

cond-mat.supr-con↗