arXiv subjects

Sunil Bhave

Publications and source records attributed to Sunil Bhave.

9 recordsLinked to original sources

arXiv2026

Push-Pull acousto-optic modulator based on non-suspended thin-film lithium niobate on silicon substrate

Acousto-optic modulators (AOMs) are particularly attractive for microwave-to-optical conversion, quantum transduction, and optical frequency manipulation. For these applications, chip-scale AOMs that combine high efficiency, broad bandwidth, and low optical loss are highly desirable. Although suspended and resonant AOMs can enhance modulation efficiency, they typically suffer from stability concerns and limited bandwidth. Here, we demonstrate a non-suspended built-in push-pull AOM on a thin-film lithium niobate (TFLN) on silicon substrate that simultaneously offers high efficiency and relatively broad bandwidth. We further investigate the orientation dependence of electromechanical coupling in X-cut TFLN by fabricating devices with different acoustic propagation directions and identify an optimized orientation for enhanced acousto-optic transduction. Our low-loss device achieves a half-wave voltage-length product of 1.004 V cm at 0.842 GHz with an interaction length of 400 micrometers, together with a relatively wide acousto-optic modulation bandwidth of 132.5 MHz. These results pave the way for efficient, practical integrated photonic-phononic links.

physics.optics↗

arXiv2026

FinLN: 3D Fin Lithium Niobate Acoustic Resonators

We demonstrate a three-dimensional fin lithium niobate (FinLN) acoustic resonator fabricated from thick lithium niobate on insulator using deep ion etching and sidewall electrode patterning. The FinLN geometry enables strong three-dimensional acoustic confinement and enhanced electromechanical coupling while maintaining a compact device footprint. The fabricated devices operate near 300 MHz and exhibit an effective electromechanical coupling coefficient of 6.2% with a mechanical quality factor of 430, in good agreement with finite-element simulations. Compared to planar surface acoustic wave resonators fabricated on the same wafer, the FinLN configuration achieves an 1.8x enhancement in effective coupling. This work establishes FinLN as a promising platform for compact, high-performance RF MEMS and piezo-optomechanical systems.

physics.app-ph↗

arXiv2024

Piezoelectric actuation for integrated photonics

Recent decades have seen significant advancements in integrated photonics, driven by improvements in nanofabrication technology. This field has developed from integrated semiconductor lasers and low-loss waveguides to optical modulators, enabling the creation of sophisticated optical systems on a chip scale capable of performing complex functions like optical sensing, signal processing, and metrology. The tight confinement of optical modes in photonic waveguides further enhances the optical nonlinearity, leading to a variety of nonlinear optical phenomena such as optical frequency combs, second-harmonic generation, and supercontinuum generation. Active tuning of photonic circuits is crucial not only for offsetting variations caused by fabrication in large-scale integration, but also serves as a fundamental component in programmable photonic circuits. Piezoelectric actuation in photonic devices offers a low-power, high-speed solution and is essential in the design of future photonic circuits due to its compatibility with materials like Si and Si3N4, which do not exhibit electro-optic effects. Here, we provide a detailed review of the latest developments in piezoelectric tuning and modulation, by examining various piezoelectric materials, actuator designs tailored to specific applications, and the capabilities and limitations of current technologies. Additionally, we explore the extensive applications enabled by piezoelectric actuators, including tunable lasers, frequency combs, quantum transducers, and optical isolators. These innovative ways of managing photon propagation and frequency on-chip are expected to be highly sought after in the future advancements of advanced photonic chips for both classical and quantum optical information processing and computing.

physics.optics↗

arXiv2023

Frequency agile photonic integrated external cavity laser

Recent advances in the development of ultra-low loss silicon nitride integrated photonic circuits have heralded a new generation of integrated lasers capable of reaching fiber laser coherence. However, these devices presently are based on self-injection locking of distributed feedback (DFB) laser diodes, increasing both the cost and requiring tuning of laser setpoints for their operation. In contrast, turn-key legacy laser systems use reflective semiconductor optical amplifiers (RSOA). While this scheme has been utilized for integrated photonics-based lasers, so far, no cost-effective RSOA-based integrated lasers exist that are low noise and simultaneously feature fast, mode-hop-free and linear frequency tuning as required for frequency modulated continuous wave (FMCW) LiDAR or for laser locking in frequency metrology. Here we overcome this challenge and demonstrate a RSOA-based, frequency agile integrated laser, that can be tuned with high speed, with high linearity at low power. This is achieved using monolithic integration of piezoelectrical actuators on ultra-low loss silicon nitride photonic integrated circuits in a Vernier filter-based laser scheme. The laser operates at 1550 nm, features 6 mW output power, 400 Hz intrinsic laser linewidth, and allows ultrafast wavelength switching within 7 ns rise time and 75 nW power consumption. In addition, we demonstrate the suitability for FMCW LiDAR by showing laser frequency tuning over 1.5 GHz at 100 kHz triangular chirp rate with nonlinearity of 0.25% after linearization, and use the source for measuring a target scene 10 m away with a 8.5 cm distance resolution.

physics.optics↗

arXiv2021

High-Field Magnetometry with Hyperpolarized Nuclear Spins

Quantum sensors have attracted broad interest in the quest towards sub-micronscale NMR spectroscopy. Such sensors predominantly operate at low magnetic fields. Instead, however, for high resolution spectroscopy, the high-field regime is naturally advantageous because it allows high absolute chemical shift discrimination. Here we propose and demonstrate a high-field spin magnetometer constructed from an ensemble of hyperpolarized ${}^{13}C$ nuclear spins in diamond. The ${}^{13}C$ nuclei are initialized via Nitrogen Vacancy (NV) centers and protected along a transverse Bloch sphere axis for minute-long periods. When exposed to a time-varying (AC) magnetic field, they undergo secondary precessions that carry an imprint of its frequency and amplitude. The method harnesses long rotating frame ${}^{13}C$ sensor lifetimes $T_2^{\prime}{>}$20s, and their ability to be continuously interrogated. For quantum sensing at 7T and a single crystal sample, we demonstrate spectral resolution better than 100 mHz (corresponding to a frequency precision ${<}$1ppm) and single-shot sensitivity better than 70pT. We discuss the advantages of nuclear spin magnetometers over conventional NV center sensors, including deployability in randomly-oriented diamond particles and in optically scattering media. Since our technique employs densely-packed ${}^{13}C$ nuclei as sensors, it demonstrates a new approach for magnetometry in the "coupled-sensor" limit. This work points to interesting opportunities for microscale NMR chemical sensors constructed from hyperpolarized nanodiamonds and suggests applications of dynamic nuclear polarization (DNP) in quantum sensing.

quant-ph↗

arXiv2021

Quantum coherent microwave-optical transduction using high overtone bulk acoustic resonances

A device capable of converting single quanta of the microwave field to the optical domain is an outstanding endeavour in the context of quantum interconnects between distant superconducting qubits, but likewise can have applications in other fields, such as radio astronomy or, in the classical realm, microwave photonics. A variety of transduction approaches, based on optomechanical or electro-optical interactions, have been proposed and realized, yet the required vanishing added noises and an efficiency approaching unity, have not yet been attained. Here we present a new transduction scheme that could in theory satisfy the requirements for quantum coherent bidirectional transduction. Our scheme relies on an intermediary mechanical mode, a high overtone bulk acoustic resonance (HBAR), to coherently couple microwave and optical photons through the piezoelectric and strain-optical effects. Its efficiency results from the combination of integrated Si3N4 photonic circuits with ultra low loss sustaining high intracavity photon numbers with the highly efficient microwave to mechanical transduction offered by piezoelectrically coupled HBAR. We develop a quantum theory for this multipartite system by first introducing a quantization method for the piezoelectric interaction between the microwave mode and the mechanical mode from first principles (which to our knowledge has not been presented in this form), and link the latter to the conventional Butterworth-Van Dyke model. The HBAR is subsequently coupled to a pair of hybridized optical modes from coupled optical ring cavities via the strain-optical effect. We analyze the conversion capabilities of the proposed device using signal flow graphs, and demonstrate that near quantum coherent transduction is possible, with realistic experimental parameters.

quant-ph↗

arXiv2020

Mechanical Quantum Sensing in the Search for Dark Matter

Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mechanical systems, in both the classical and quantum regimes, have enabled unprecedented levels of sensitivity. In this white paper, we outline recent ideas in the potential use of a range of solid-state mechanical sensing technologies to aid in the search for dark matter in a number of energy scales and with a variety of coupling mechanisms.

physics.ins-det↗

arXiv2019

Development of Quantum InterConnects for Next-Generation Information Technologies

Just as classical information technology rests on a foundation built of interconnected information-processing systems, quantum information technology (QIT) must do the same. A critical component of such systems is the interconnect, a device or process that allows transfer of information between disparate physical media, for example, semiconductor electronics, individual atoms, light pulses in optical fiber, or microwave fields. While interconnects have been well engineered for decades in the realm of classical information technology, quantum interconnects (QuICs) present special challenges, as they must allow the transfer of fragile quantum states between different physical parts or degrees of freedom of the system. The diversity of QIT platforms (superconducting, atomic, solid-state color center, optical, etc.) that will form a quantum internet poses additional challenges. As quantum systems scale to larger size, the quantum interconnect bottleneck is imminent, and is emerging as a grand challenge for QIT. For these reasons, it is the position of the community represented by participants of the NSF workshop on Quantum Interconnects that accelerating QuIC research is crucial for sustained development of a national quantum science and technology program. Given the diversity of QIT platforms, materials used, applications, and infrastructure required, a convergent research program including partnership between academia, industry and national laboratories is required. This document is a summary from a U.S. National Science Foundation supported workshop held on 31 October - 1 November 2019 in Alexandria, VA. Attendees were charged to identify the scientific and community needs, opportunities, and significant challenges for quantum interconnects over the next 2-5 years.

quant-ph↗

arXiv2019

Mechanically Modulated Microwave Circulator

This work presents a differential FBAR circulator that uses the bending mode to mechanically modulate the FBAR mode without any varactors or switches. The differential FBAR circulator achieves a 61.5 dB isolation (IX) with an insertion loss (IL) of 1.8 dB at 2.68 GHz, demonstrating the first MEMS-only circulator. The isolation bandwidth at -25 dB is 4.7 MHz and power handling of the circulator is limited by the FBARs to +34 dBm.

eess.SP↗