arXiv subjects

T. J. B. M. Janssen

Publications and source records attributed to T. J. B. M. Janssen.

31 records · Page 2Linked to original sources

arXiv2012

Gigahertz quantized charge pumping in graphene quantum dots

Single electron pumps are set to revolutionize electrical metrology by enabling the ampere to be re-defined in terms of the elementary charge of an electron. Pumps based on lithographically-fixed tunnel barriers in mesoscopic metallic systems and normal/superconducting hybrid turnstiles can reach very small error rates, but only at MHz pumping speeds corresponding to small currents of the order 1 pA. Tunable barrier pumps in semiconductor structures have been operated at GHz frequencies, but the theoretical treatment of the error rate is more complex and only approximate predictions are available. Here, we present a monolithic, fixed barrier single electron pump made entirely from graphene. We demonstrate pump operation at frequencies up to 1.4 GHz, and predict the error rate to be as low as 0.01 parts per million at 90 MHz. Combined with the record-high accuracy of the quantum Hall effect and proximity induced Josephson junctions, accurate quantized current generation brings an all-graphene closure of the quantum metrological triangle within reach. Envisaged applications for graphene charge pumps outside quantum metrology include single photon generation via electron-hole recombination in electrostatically doped bilayer graphene reservoirs, and for readout of spin-based graphene qubits in quantum information processing.

cond-mat.mes-hall↗

arXiv2012

Towards a quantum representation of the ampere using single electron pumps

Electron pumps generate a macroscopic electric current by controlled manipulation of single electrons. Despite intensive research towards a quantum current standard over the last 25 years, making a fast and accurate quantised electron pump has proved extremely difficult. Here we demonstrate that the accuracy of a semiconductor quantum dot pump can be dramatically improved by using specially designed gate drive waveforms. Our pump can generate a current of up to 150 pA, corresponding to almost a billion electrons per second, with an experimentally demonstrated current accuracy better than 1.2 parts per million (ppm) and strong evidence, based on fitting data to a model, that the true accuracy is approaching 0.01 ppm. This type of pump is a promising candidate for further development as a realisation of the SI base unit ampere, following a re-definition of the ampere in terms of a fixed value of the elementary charge.

cond-mat.mes-hall↗

arXiv2012

Precision comparison of the quantum Hall effect in graphene and gallium arsenide

The half-integer quantum Hall effect in epitaxial graphene is compared with high precision to the well known integer effect in a GaAs/AlGaAs heterostructure. We find no difference between the quantised resistance values within the relative standard uncertainty of our measurement of $8.7\times 10^{-11}$. The result places new tighter limits on any possible correction terms to the simple relation $R_{\rm K}=h/e^2$, and also demonstrates that epitaxial graphene samples are suitable for application as electrical resistance standards of the highest metrological quality. We discuss the characterisation of the graphene sample used in this experiment and present the details of the cryogenic current comparator bridge and associated uncertainty budget.

cond-mat.mes-hall↗

arXiv2011

Graphene, universality of the quantum Hall effect and redefinition of the SI system

The Système Internationale d'unités (SI system) is about to undergo its biggest change in half a century by redefining the units for mass and current in terms of the fundamental constants h and e, respectively. This change crucially relies on the exactness of the relationships which link these constants to measurable quantities. Here we directly compare the integer quantum Hall effect in epitaxial graphene with that in GaAs/AlGaAs heterostructures. We find no difference of the quantized resistance value within the relative standard uncertainty of our measurement of 8.6\times10-11, being the most stringent test of the universality of the quantum Hall effect in terms of material independence.

cond-mat.mes-hall↗

arXiv2011

Anomalously strong pinning of the filling factor nu=2 in epitaxial graphene

We explore the robust quantization of the Hall resistance in epitaxial graphene grown on Si-terminated SiC. Uniquely to this system, the dominance of quantum over classical capacitance in the charge transfer between the substrate and graphene is such that Landau levels (in particular, the one at exactly zero energy) remain completely filled over an extraordinarily broad range of magnetic fields. One important implication of this pinning of the filling factor is that the system can sustain a very high nondissipative current. This makes epitaxial graphene ideally suited for quantum resistance metrology, and we have achieved a precision of 3 parts in 10^10 in the Hall resistance quantization measurements.

cond-mat.mes-hall↗

arXiv2010

Single- and few-electron dynamic quantum dots in a perpendicular magnetic field

We present experimental studies of the current pumped through a dynamic quantum dot over a wide range of magnetic fields. At low fields we observe repeatable structure indicating increased confinement of the electrons in the dynamic dot. At higher fields (B>3T), we observe structure which changes markedly from device to device suggesting that in this regime the transport is sensitive to local disorder. The results are significant for the development of dynamic quantum dot pumps as quantum standards of electrical current.

cond-mat.mes-hall↗

arXiv2010

Accurate high speed single-electron quantum dot preparation

Using standard microfabrication techniques it is now possible to construct devices, which appear to reliably manipulate electrons one at a time. These devices have potential use as building blocks in quantum computing devices, or as a standard of electrical current derived only from a frequency and the fundamental charge. To date the error rate in semiconductor 'tuneable-barrier' pump devices, those which show most promise for high frequency operation, have not been tested in detail. We present high accuracy measurements of the current from an etched GaAs quantum dot pump, operated at zero source-drain bias voltage with a single AC-modulated gate driving the pump cycle. By comparison with a reference current derived from primary standards, we show that the electron transfer accuracy is better than 15 parts per million. High-resolution studies of the dependence of the pump current on the quantum dot tuning parameters also reveal possible deviations from a model used to describe the pumping cycle.

cond-mat.mes-hall↗

arXiv2009

SiC Graphene Suitable For Quantum Hall Resistance Metrology

We report the first observation of the quantum Hall effect in epitaxial graphene. The result described in the submitted manuscript fills the yawning gap in the understanding of the electronic properties of this truly remarkable material and demonstrate suitability of the silicon carbide technology for manufactiring large area high quality graphene. Having found the quantum Hall effect in several devices produced on distant parts of a single large-area wafer, we can confirm that material synthesized on the Si-terminated face of SiC promises a suitable platform for the implementations of quantum resistance metrology at elevated temperatures and, in the longer term, opens bright prospects for scalable electronics based on graphene.

cond-mat.mes-hall↗

arXiv2008

Enhanced current quantization in high frequency electron pumps in a perpendicular magnetic field

We present experimental results of high frequency quantized charge pumping through a quantum dot formed by the electric field arising from applied voltages in a GaAs/AlGaAs system in the presence of a perpendicular magnetic field B. Clear changes are observed in the quantized current plateaus as a function of applied magnetic field. We report on the robustness in the length of the quantized plateaus and improvements in the quantization as a result of the applied B field.

cond-mat.mes-hall↗

arXiv2007

Single-parameter non-adiabatic quantized charge pumping

Controlled charge pumping in an AlGaAs/GaAs gated nanowire by single-parameter modulation is studied experimentally and theoretically. Transfer of integral multiples of the elementary charge per modulation cycle is clearly demonstrated. A simple theoretical model shows that such a quantized current can be generated via loading and unloading of a dynamic quasi-bound state. It demonstrates that non-adiabatic blockade of unwanted tunnel events can obliterate the requirement of having at least two phase-shifted periodic signals to realize quantized pumping. The simple configuration without multiple pumping signals might find wide application in metrological experiments and quantum electronics.

cond-mat.mes-hall↗

arXiv2006

Low-dimensional light-emitting transistor with tunable recombination zone

We present experimental and numerical studies of a light-emitting transistor comprising two quasi-lateral junctions between a two-dimensional electron and hole gas. These lithographically defined junctions are fabricated by etching of a modulation doped GaAs/AlGaAs heterostructure. In this device electrons and holes can be directed to the same area by drain and gate voltages, defining a recombination zone tunable in size and position. It could therefore provide an architecture for probing low-dimensional devices by analysing the emitted light of the recombination zone.

cond-mat.mes-hall↗

arXiv2003

Quantized charge pumping through a quantum dot by surface acoustic waves

We present a realization of quantized charge pumping. A lateral quantum dot is defined by metallic split gates in a GaAs/AlGaAs heterostructure. A surface acoustic wave whose wavelength is twice the dot length is used to pump single electrons through the dot at a frequency f=3GHz. The pumped current shows a regular pattern of quantization at values I=nef over a range of gate voltage and wave amplitude settings. The observed values of n, the number of electrons transported per wave cycle, are determined by the number of electronic states in the quantum dot brought into resonance with the fermi level of the electron reservoirs during the pumping cycle.

cond-mat.mes-hall↗

arXiv2003

Quantized charge transport through a static quantum dot using a surface acoustic wave

We present a detailed study of the surface acoustic wave mediated quantized transport of electrons through a split gate device containing an impurity potential defined quantum dot within the split gate channel. A new regime of quantized transport is observed at low RF powers where the surface acoustic wave amplitude is comparable to the quantum dot charging energy. In this regime resonant transport through the single-electron dot state occurs which we interpret as turnstile-like operation in which the traveling wave amplitude modulates the entrance and exit barriers of the quantum dot in a cyclic fashion at GHz frequencies. For high RF powers, where the amplitude of the surface acoustic wave is much larger than the quantum dot energies, the quantized acoustoelectric current transport shows behavior consistent with previously reported results. However, in this regime, the number of quantized current plateaus observed and the plateau widths are determined by the properties of the quantum dot, demonstrating that the microscopic detail of the potential landscape in the split gate channel has a profound influence on the quantized acoustoelectric current transport.

cond-mat.mes-hall↗