arXiv subjects

Thi Ngoc Anh Mai

Publications and source records attributed to Thi Ngoc Anh Mai.

6 recordsLinked to original sources

arXiv2026

Facile hBN-hBN Interfacial Overlap Engineering for Enhanced Quantum Emitter Formation

Quantum emitters in two-dimensional materials, particularly hBN, are promising platforms for quantum technologies. However, achieving high-density emitters at predetermined locations while preserving optical quality remains challenging. Here, we introduce a facile, cost-effective double-layer all-dry transfer approach to deterministically create overlap regions between hBN flakes. These pre-defined capped regions exhibit a significantly enhanced emitter density, with up to a 15-fold increase compared to uncapped areas. Importantly, this method does not compromise emitter quality: emitters within overlap regions demonstrate excellent optical performance, including high signal-to-background and signal-to-noise ratios, large Debye-Waller factors, high brightness, and strong spectral stability. Possible defect configurations are also discussed to contextualize the observed emission characteristics. This scalable strategy enables preferential formation of quantum emitters in targeted regions, achieving higher densities than simple treatments such as plasma irradiation while avoiding the complexity of advanced fabrication techniques. The approach provides a practical pathway for integrating high-quality quantum emitters into scalable quantum photonic platforms.

cond-mat.mtrl-sci↗

arXiv2026

Nanoscale Fluorescence Thermometry: Probes, Recent Advances and Emerging Directions

The transition of materials and devices to nanometer, atomic, and quantum scales makes thermal characterization increasingly challenging, driving the need for advanced nanoscale thermometry. Fluorescence nanothermometry has emerged as a powerful approach, enabling remote, spatially resolved temperature measurements with sub-micrometer-to-nanometer precision across applications in nanoelectronics, microfluidics, and biological systems. In these systems, temperature is inferred from variations in fluorescence observables, including spectral position, intensity, linewidth, and excited-state dynamics. This review provides a comprehensive and critical overview of fluorescence nanothermometry, covering fundamental mechanisms, material platforms, recent advances, and emerging applications. It further presents a critical evaluation of key challenges and discusses emerging strategies and future research directions toward achieving robust, real-time thermometry. It is anticipated that this review will stimulate further advances in material platforms and system design, accelerating the development of accurate, scalable, and application-ready nanoscale thermometers.

physics.optics↗

arXiv2025

Laser-Induced Heating in Diamonds: Influence of Substrate Thermal Conductivity and Interfacial Polymer Layers

Diamonds hosting color centers possess intrinsically high thermal conductivity; therefore, laser-induced heating has often received little attention. However, when placed on substrates with low thermal conductivity, localized heating of diamonds under laser excitation can become significant, and the presence of an interfacial polymer layer between substrate and diamond further amplifies this effect. Yet, the relationship between substrate thermal conductivity, polymer thickness, and laser heating remains to be established. Here, a systematic investigation is presented on laser-induced heating of silicon-vacancy diamond on substrates with varying thermal conductivity and interfacial polymer thickness. Results reveal that even at a low excitation power of 737~$μ$W/$μ$m$^2$, thin amorphous holey carbon -- the lowest-conductivity substrate ($\sim$0.2~W~m$^{-1}$~K$^{-1}$) studied -- exhibits substantial heating, while glass ($\sim$1.4~W~m$^{-1}$~K$^{-1}$) and polydimethylsiloxane (PDMS, $\sim$0.35~W~m$^{-1}$~K$^{-1}$) show noticeable heating only above 2.95~mW/$μ$m$^2$. For polymer interlayers, a thickness of just 2.2~$μ$m induces significant heating at 2.95~mW/$μ$m$^2$ and above, highlighting strong influence of both substrate and polymer thickness on local heating response. Experimental findings are further validated using COMSOL Multiphysics simulations with a steady-state 3D heat transfer model. These results provide practical guidance for substrate selection and sample preparation, enabling optimization of conditions for optical thermometry and quantum sensing applications.

cond-mat.mtrl-sci↗

arXiv2025

Quantum Emitters in Hexagonal Boron Nitride: Principles, Engineering and Applications

Solid-state quantum emitters, molecular-sized complexes releasing a single photon at a time, have garnered much attention owing to their use as a key building block in various quantum technologies. Among these, quantum emitters in hexagonal boron nitride (hBN) have emerged as front runners with superior attributes compared to other competing platforms. These attributes are attainable thanks to the robust, two-dimensional lattice of the material formed by the extremely strong B-N bonds. This review discusses the fundamental properties of quantum emitters in hBN and highlights recent progress in the field. The focus is on the fabrication and engineering of these quantum emitters facilitated by state-of-the-art equipment. Strategies to integrate the quantum emitters with dielectric and plasmonic cavities to enhance their optical properties are summarized. The latest developments in new classes of spin-active defects, their predicted structural configurations, and the proposed suitable quantum applications are examined. Despite the current challenges, quantum emitters in hBN have steadily become a promising platform for applications in quantum information science.

cond-mat.mtrl-sci↗

arXiv2023

Fiber-based Ratiometric Optical Thermometry with Silicon-Vacancy in Microdiamonds

Fiber optic all-optical thermometry is a promising technology to track temperature at a micro-scale while designing efficient and reliable microelectronic devices and components. In this work, we demonstrate a novel real-time ratiometric fiber optic thermometry technique based on silicon-vacancy (SiV) diamond that shows the highest temperature resolution (22.91 KHz^(-1/2) Wcm^(-2)) and spatial resolution (~7.5 um) among all-optical fiber-based thermosensors reported to date. Instead of analyzing the spectral features of temperature-dependent SiV signal, coming from SiV micro-diamond fixed on the fiber tip, an alternative parallel detection method based on filtering optics and photon counters is proposed to read out the sample temperature in real-time. The signal collection efficiency of the fiber is also investigated numerically with semi-analytic ray-optical analysis and then compared with our experimental study. We finally demonstrate the performance of the thermosensor by monitoring the temperature at distinct locations in a lab-built graphite-based microheater device. Our work introduces a reconfigurable method for temperature monitoring in microelectronic, microfluidic devices, or biological environments and unlocks a new direction for fiber-based all-optical thermometry research.

physics.optics↗

arXiv2023

Cryogenic Thermal Shock Effects on Optical Properties of Quantum Emitters in Hexagonal Boron Nitride

Solid-state quantum emitters are vital building blocks for quantum information science and quantum technology. Among various types of solid-state emitters discovered to date, color centers in hexagonal boron nitride have garnered tremendous traction in recent years thanks to their environmental robustness, high brightness and room-temperature operation. Most recently, these quantum emitters have been employed for satellite-based quantum key distribution. One of the most important requirements to qualify these emitters for space-based applications is their optical stability against cryogenic thermal shock. Such understanding has, however, remained elusive to date. Here, we report on the effects caused by such thermal shock which induces random, irreversible changes in the spectral characteristics of the quantum emitters. By employing a combination of structural characterizations and density functional calculations, we attribute the observed changes to lattice strains caused by the cryogenic temperature shock. Our study shed light on the stability of the quantum emitters under extreme conditions, similar to those countered in outer space.

physics.app-ph↗