arXiv subjects

Thiago P. Mayer Alegre

Publications and source records attributed to Thiago P. Mayer Alegre.

At least 19 recordsLinked to original sources

arXiv2026

Efficient Conversion of Optical to Mechanical States Close to the Single-Quantum Level

Coherent interfaces between optical photons and mechanical excitations provide a promising route towards phonon-state engineering and hybrid quantum information processing. Cavity optomechanical systems enable such interfaces via optomechanically induced transparency (OMIT), allowing coherent mapping between traveling optical fields and localized mechanical modes. However, previous implementations of OMIT conversion protocols were limited to classical input signals with large coherent state photon numbers due to room temperature operation and corresponding thermal mechanical noise. Here, we demonstrate efficient low-noise photon-phonon state transfer close to the single-quantum regime in an optomechanical crystal operated at Millikelvin temperatures. Using weak coherent optical input pulses at the few-photon level, we achieve a record-level photon-phonon conversion efficiency of $η=0.76$, a mechanical storage lifetime of $T_\mathrm{1}=7.3~μs$, and a tunable conversion bandwidth exceeding 4.5 MHz. Hanbury Brown-Twiss measurements of the retrieved signal demonstrate the coherent nature of the converted phononic state, evidencing low added thermal noise in the conversion process ($n_\mathrm{th}=9.0$). These results establish optomechanical crystals as efficient optical interfaces to GHz mechanical modes and provide a pathway toward deterministic single-quantum-level mechanical state preparation.

quant-ph↗

arXiv2026

From order to chaos in a chip-scale Kerr parametric oscillator

Integrated photonics has enabled a wide class of chip-scale light sources and quantum technologies. Within this field, microresonator-based degenerate optical parametric oscillators (DOPOs) have gained prominence. Above a critical power threshold, these systems undergo spontaneous symmetry breaking to settle into one of two stable, π-phase-shifted states -- a mechanism successfully used for quantum random number generation and photonic Ising machines. Here, we show that DOPOs based on the Kerr nonlinearity host a significantly broader range of nonlinear dynamics than previously explored. Using a silicon nitride microring resonator, we experimentally identify Hopf bifurcations that trigger a transition from stationary operation to self-sustained oscillations at MHz frequencies. By adjusting pump detunings and powers, we achieve turnkey control over these oscillatory regimes, navigating the system between stable binary states and periodic limit cycles. Furthermore, we report the experimental observation of period-doubling bifurcations, which numerical simulations reveal as the precursor to a cascading instability culminating in chaos at elevated pump powers. Our results establish a framework for controlling nonlinear instabilities in chip-scale parametric oscillators, with applications in programmable photonic hardware and dynamical optical computing.

physics.optics↗

arXiv2026

Low-noise Optomechanical Single Phonon-photon Conversion for Quantum Networks

Nano-structured optomechanical crystals (OMC) form an interface between mechanical modes with long coherence times and telecom optical photons, ideal for long-distance distribution of quantum information. However, the implementation of scalable quantum networks based on OMCs has been inhibited by thermal mechanical noise. Here, we overcome this limitation using a quasi-two-dimensional OMC and generate single photons via single phonon-photon conversion. In this work, we verify the low thermal noise and high purity of the generated single photons through a Hanbury Brown-Twiss experiment with $g^{(2)}(0)=0.35^{+0.10}_{-0.08}$. We perform Hong-Ou-Mandel interference of the emitted photons showcasing the indistinguishability and coherence with visibility $V=0.52 \pm 0.15$ after 1.43 km fiber delay. Lastly, we use two-photon interference to measure the temporal wavepackets of optomechanically generated single photons demonstrating narrow bandwidths as low as 10 MHz. Our results pave the way for multinode quantum networks of mechanical oscillators and hybrid entanglement generation between mechanical oscillators and telecom quantum emitters.

quant-ph↗

arXiv2026

Hybridized-band parametric oscillations in coupled Kerr microresonators

Coupled resonators form band-like optical states that support rich nonlinearities beyond what is possible in single resonators. In these systems, four-wave mixing mediates interband coupling, displaying multimode dynamics that span both spatial and spectral degrees of freedom. In this study, we propose a framework describing the onset and control of hybridized optical parametric oscillation in three coupled silicon nitride microring resonators. In a symmetric configuration, we observe the emergence of diverse phase-matching pathways defined by the dispersive band structure. We develop an analytical model that captures the parametric gain of these interband processes and derive closed-form expressions for the dominant gain maxima; the analytical framework itself readily extends to more complex coupled networks. We further report an asymmetric design that co-engineers mode overlap and dispersion to operate on a compact 7-GHz spacing, free from mode competition. Our findings establish design principles for engineering nonlinear dynamics in coupled-resonator platforms, with implications for coherent photonic computing and quantum information processing.

physics.optics↗

arXiv2024

Optomechanical microgear cavity

We introduce a novel optomechanical microgear cavity for both optical and mechanical isotropic materials, featuring a single etch configuration. The design leverages a conjunction of phononic and photonic crystal-like structures to achieve remarkable confinement of both optical and mechanical fields. The microgear cavity we designed in amorphous silicon nitride exhibits a mechanical resonance at 4.8 GHz, and whispering gallery modes in the near-infrared, with scattering-limited quality factors above the reported material limit of up $10^7$. Notably, the optomechanical photoelastic overlap contribution reaches 75% of the ideal configuration seen in a floating ring structure.

physics.optics↗

arXiv2024

Tunable Degenerate Optical Parametric Oscillation with Coupled Microresonators

Microresonator-based degenerate optical parametric oscillation (DOPO) has recently been explored as a compelling platform for all-optical computing and quantum information applications, such as truly random number generation and the production of squeezed states of light. Emerging research has highlighted the potential of coupled microresonators, or photonic molecules, as a novel avenue for spectral engineering, unlocking an extra degree of freedom for the optimization of four-wave mixing interactions. Here, we demonstrate DOPO within the coupled modes of a silicon nitride triple-state photonic molecule. Our design introduces a distinctive mechanism for spectral engineering, using microheaters to individually tune the resonance spectral positions, thus enabling dynamic local dispersion control within the coupled modes. We successfully generate a DOPO signal with active efficiency control and explore the optical mode spacing in the tens of gigahertz range to use native phase-locked optical pumps driven by a radio-frequency source.

physics.optics↗

arXiv2023

Dissipative Optomechanics in High-Frequency Nanomechanical Resonators

The coherent transduction of information between microwave and optical domains is a fundamental building block for future quantum networks. A promising way to bridge these widely different frequencies is using high-frequency nanomechanical resonators interacting with low-loss optical modes. State-of-the-art optomechanical devices rely on purely dispersive interactions that are enhanced by a large photon population in the cavity. Additionally, one could use dissipative optomechanics, where photons can be scattered directly from a waveguide into a resonator hence increasing the degree of control of the acousto-optic interplay. Hitherto, such dissipative optomechanical interaction was only demonstrated at low mechanical frequencies, precluding prominent applications such as the quantum state transfer between photonic and phononic domains. Here, we show the first dissipative optomechanical system operating in the sideband-resolved regime, where the mechanical frequency is larger than the optical linewidth. Exploring this unprecedented regime, we demonstrate the impact of dissipative optomechanical coupling in reshaping both mechanical and optical spectra. Our figures represent a two-order-of-magnitude leap in the mechanical frequency and a tenfold increase in the dissipative optomechanical coupling rate compared to previous works. Further advances could enable the individual addressing of mechanical modes and help mitigate optical nonlinearities and absorption in optomechanical devices.

physics.optics↗

arXiv2023

Synchronization of silicon thermal-free-carrier oscillators

Recent exploration of collective phenomena in oscillator arrays has highlighted its potential for accessing a range of physical phenomena, from fundamental quantum many-body dynamics to the solution of practical optimization problems using photonic Ising machines. Spontaneous oscillations often arise in these oscillator arrays as an imbalance between gain and loss. Due to coupling between array individuals, the spontaneous oscillation is constrained and lead to interesting collective behavior, such as synchronized oscillations in optomechanical oscillator arrays, ferromagnetic-like coupling in delay-coupled optical parametric oscillators and binary phase states in coupled laser arrays. A key aspect of arrays is not only the coupling between its individuals but also their compliance towards neighbor stimuli. One self-sustaining photonic oscillator that can be readily implemented in a scalable foundry-based technology is based on the interaction of free-carriers, temperature and optical field of a resonant silicon photonic microcavity. Here we demonstrate that these silicon thermal-free-carrier oscillators are extremely compliant to external excitation and can be synchronized up to their 16$^\text{th}$ harmonic using a weak seed. Exploring this unprecedented compliance to external stimuli, we also demonstrate robust synchronization between two thermal free carrier oscillators.

physics.optics↗

arXiv2022

Third-harmonic generation in silica wedge resonators

Whispering-gallery-mode microcavities are known to have high optical quality factor, making them suitable for nonlinear optical interactions. Here, third-harmonic generation is observed using a relatively small radius wedge silicon oxide optical microcavity. The small radii wedge microdisks can be dispersion-tailored to obtain either normal or anomalous group velocity dispersion. In our case, we operate in the normal dispersion regime preventing frequency comb generation by suppressing infrared cascading four-wave mixing. This allows for a clean third harmonic generation at phase-matched visible optical modes. Tunability of the third-harmonic emission is obtained due to a combination of the thermo-optical and Kerr effects. An additional thermal control of the phase matching condition allows for optimizing third-harmonic generation, and agreement between this process and couple-mode theory is demonstrated.

physics.optics↗

arXiv2022

Optomechanical quantum teleportation

Quantum teleportation, the faithful transfer of an unknown input state onto a remote quantum system, is a key component in long distance quantum communication protocols and distributed quantum computing. At the same time, high frequency nano-optomechanical systems hold great promise as nodes in a future quantum network, operating on-chip at low-loss optical telecom wavelengths with long mechanical lifetimes. Recent demonstrations include entanglement between two resonators, a quantum memory and microwave to optics transduction. Despite these successes, quantum teleportation of an optical input state onto a long-lived optomechanical memory is an outstanding challenge. Here we demonstrate quantum teleportation of a polarization-encoded optical input state onto the joint state of a pair of nanomechanical resonators. Our protocol also allows for the first time to store and retrieve an arbitrary qubit state onto a dual-rail encoded optomechanical quantum memory. This work demonstrates the full functionality of a single quantum repeater node, and presents a key milestone towards applications of optomechanical systems as quantum network nodes.

quant-ph↗

arXiv2022

Silicon anisotropy in a bi-dimensional optomechanical cavity

In this work, we study the effects of mechanical anisotropy in a 2D optomechanical crystal geometry. We fabricate and measure devices with different orientations, showing the dependence of the mechanical spectrum and the optomechanical coupling with the relative angle of the device to the crystallography directions of silicon. Our results show that the device orientation strongly affects its mechanical band structure, which makes the devices more susceptible to fabrication imperfections. Finally, we show that our device is compatible with cryogenic measurements reaching ground state occupancy of 0.2 phonons at mK temperature.

quant-ph↗

arXiv2022

Optimization of diamond optomechanical crystal cavities

Due to recent development of growing and processing techniques for high-quality single crystal diamond, the large scale production of diamond optomechanical crystal cavities becomes feasible, enabling optomechanical devices that can operate in higher mechanical frequencies and be coupled to two-level systems based on diamond color centers. In this paper we describe a design optimization method to produce diamond optomechanical crystal (OMC) cavities operating at the high-cooperativity regime (close to unity) at room temperature.

physics.optics↗

arXiv2021

Accurate modeling and characterization of photothermal forces in optomechanics

Photothermal effects have been pointed out as prominent sources of forces in optomechanical systems, competing with the standard radiation pressure interactions. In this Article, we derive a novel and accurate model for the prediction of photothermal forces and establish how some previous proposals can be complemented to yield precise results. As a proof-of-concept, we perform numerical and experimental tests on GaAs microdisks cavities and obtain striking agreement with our framework, revealing the importance of considering surface photothermal forces and the effects of multiple thermal modes in microphotonic devices.

physics.optics↗

arXiv2020

Designing of strongly confined short-wave Brillouin phonons in silicon waveguide periodic lattices

We propose a feasible waveguide design optimized for harnessing Stimulated Brillouin Scattering with long-lived phonons. The design consists of a fully suspended ridge waveguide surrounded by a 1D phononic crystal that mitigates losses to the substrate while providing the needed homogeneity for the build-up of the optomechanical interaction. The coupling factor of these structures was calculated to be 0.54 (W.m)$^{-1}$ for intramodal backward Brillouin scattering with its fundamental TE-like mode and 4.5(W.m)$^{-1}$ for intramodal forward Brillouin scattering. The addition of the phononic crystal provides a 30 dB attenuation of the mechanical displacement after only five unitary cells, possibly leading to a regime where the acoustic losses are only limited by fabrication. As a result, the total Brillouin gain, which is proportional to the product of the coupling and acoustic quality factors, is nominally equal to the idealized fully suspended waveguide.

physics.optics↗

arXiv2020

Quasinormal-mode perturbation theory for dissipative and dispersive optomechanics

Despite the several novel features arising from the dissipative optomechanical coupling, such effect remains vastly unexplored due to the lack of a simple formalism that captures non-Hermiticity in optomechanical systems. In this Letter, we show that quasinormal-mode-based perturbation theory is capable of correctly predicting both dispersive and dissipative optomechanical couplings. We validate our model through simulations and also by comparison with experimental results reported in the literature. Finally, we apply this formalism to plasmonic systems, used for molecular optomechanics, where strong dissipative coupling signatures in the amplification of vibrational modes are observed.

physics.optics↗

arXiv2020

Alumina coating for dispersion management in ultra-high Q microresonators

Silica optical microspheres often exhibit ultra-high quality factors, yet, their group velocity dispersion, which is crucial for nonlinear optics applications, can only be coarsely tuned. We experimentally demonstrate that group-velocity dispersion of a silica microsphere can be engineered by coating it with conformal nanometric layers of alumina, yet preserving its ultra-high optical quality factors (\num{\sim e7}) at telecom wavelengths. Using the atomic layer deposition technique for the dielectric coating, which ensures nm-level thickness control, we not only achieve a fine dispersion tailoring but also maintain a low surface roughness and material absorption to ensure a low optical loss. Numerical simulations supporting our experimental results show that the alumina layer thickness is a promising technique for precise tuning of group-velocity dispersion. As an application we demonstrate the generation of Kerr optical frequency combs, showing that the alumina coatings can also sustain the high optical intensities necessary for nonlinear optical phenomena.

physics.optics↗

arXiv2020

Proposal for optomechanical quantum teleportation

We present a novel discrete-variable quantum teleportation scheme using pulsed optomechanics. In our proposal, we demonstrate how an unknown optical input state can be transferred onto the joint state of a pair of mechanical oscillators, without physically interacting with one another. We further analyze how experimental imperfections will affect the fidelity of the teleportation and highlight how our scheme can be realized in current state-of-the-art optomechanical systems.

quant-ph↗

arXiv2020

Dispersion tailoring in wedge microcavities for Kerr comb generation

The shaping of group velocity dispersion in microresonators is an important component in the generation of wideband optical frequency combs. Small resonators - with tight bending radii - offer the large free-spectral range desirable for wide comb formation. However, the tighter bending usually limit comb formation as it enhances normal group velocity dispersion. We experimentally demonstrate that engineering the sidewall angle of small-radius (100 $μ$m), 3 $μ$m-thick silica wedge microdisks enables dispersion tuning in both normal and anomalous regimes, without significantly affecting the free spectral range. A microdisk with wedge angle of $55^{\circ}$ (anomalous dispersion) is used to demonstrate a 300 nm bandwidth Kerr optical frequency comb.

physics.optics↗