arXiv subjects

Thierry Souverin

Publications and source records attributed to Thierry Souverin.

6 recordsLinked to original sources

arXiv2026

Early Telescope Throughput Results from the Collimated Beam Projector at the Vera C. Rubin Observatory

The Vera C. Rubin Observatory LSST requires precise photometric calibration to meet its science goals, particularly for cosmological analyses based on Type Ia supernovae. The Collimated Beam Projector (CBP) has been developed to support this effort by projecting monochromatic point sources of known wavelength and flux directly into the telescope aperture, enabling direct in situ measurements of the full system throughput. We present initial results demonstrating the CBP capability to characterize the instrumental response of the Rubin Telescope and to measure the transmission profiles of LSSTCam broadband filters. In particular, the CBP enables spatially resolved mapping of filter bandpass edge shifts across the focal plane, which can vary by several nanometers as a function of the ray angle of incidence. These early results establish the CBP as a powerful photometric calibration tool and lay the groundwork for continuous throughput monitoring throughout LSST operations.

astro-ph.IM↗

arXiv2026

StarDICE IV: correcting visible photometry from atmospheric gray extinction using thermal infrared observations

Ground-based surveys such as the Vera C. Rubin Observatory's Legacy Survey of Space and Time require photometric calibration that is both long-term stable and spatially uniform at the sub-per cent level, even during non-photometric conditions. Achieving this precision motivates new approaches to characterize atmospheric transmission, particularly to mitigate grey extinction from clouds. The StarDICE experiment aims to establish a metrology chain linking laboratory standards to astrophysical fluxes with 1 mmag accuracy in the $\textit{griz}$ bands, a goal for which controlling variable atmospheric effects is essential. We present a method that corrects photometric measurements using simultaneous radiometric information from an infrared thermal camera. The grey-extinction model is fit on an image-by-image basis using thermal radiance excess and the difference between synthetic and instrumental fluxes of calibration stars, without requiring assumptions about the spatial structure of extinction. The method relies on a forward model that incorporates environmental monitoring, radiative-transfer simulations, and Gaia DR3 stellar catalogues. Using data from a remote observing system that repeatedly monitored two fields under diverse atmospheric conditions, we show that the corrections reduce residuals between corrected and reference magnitudes and produce extinction maps with 2-arcmin resolution and ~0.01 mag accuracy. Using this technique, we can recover data acquired under non-photometric conditions with a precision comparable to data obtained under photometric conditions. For the most affected exposures, the mean absolute error improves from 0.64 to 0.11 mag, and temporal extinction variations can be reduced to 0.025 mag per source. We discuss the implications of this technique for future surveys and outline directions for further refinement.

astro-ph.IM↗

arXiv2024

StarDICE III: Characterization of the photometric instrument with a Collimated Beam Projector

The measurement of type Ia supernovae magnitudes provides cosmological distances, which can be used to constrain dark energy parameters. Large photometric surveys require a substantial improvement in the calibration precision of their photometry to reduce systematic uncertainties in cosmological constraints. The StarDICE experiment is designed to establish accurate broadband flux references for these surveys, aiming for sub-percent precision in magnitude measurements. This requires a precise measurement of the filter bandpasses of both the StarDICE and survey instruments with sub-nanometer accuracy. To that end, we have developed the Collimated Beam Projector (CBP), an optical device capable of calibrating the throughput of an astronomical telescope and of its filters. The CBP is built from a tunable laser source and a reversed telescope to emit a parallel monochromatic light beam that is continuously monitored in flux and wavelength. The CBP output light flux is measured using a large area photodiode, previously calibrated relative to a NIST photodiode. We derive the StarDICE telescope throughput and filter transmissions from the CBP measurements, anchoring it to the absolute calibration provided by the NIST. After analyzing the systematic uncertainties, we achieved sub-nanometer accuracy in determining filter central wavelengths, measured each filter transmission with a precision of 0.5% per 1nm bin, and detected out-of-band leakages at 0.01%. Furthermore, we have synthesized the equivalent transmission for full pupil illumination from four sample positions in the StarDICE telescope mirror, with an accuracy of approximately 0.2nm for central wavelengths and 7mmag for broadband fluxes. We demonstrated our ability to characterize a telescope throughput down to the mmag, and paved the way for future developments, such as a portable CBP version for in-situ transmission monitoring.

astro-ph.IM↗

arXiv2024

Accurate measurement of telescope filter bandpasses with a Collimated Beam Projector and impact on cosmological parameters

The measurement of magnitudes with different filters in photometric surveys gives access to cosmological distances and parameters. However, for current and future large surveys like the ZTF, DES, HSC or LSST, the photometric calibration uncertainties are almost comparable to statistical uncertainties in the error budget of type Ia cosmology analysis, which limits our ability to use type Ia supernovae for precision cosmology. The knowledge of the bandpasses of the survey filters at the per-mill level can help reach the sub-percent precision for magnitudes. We show how a misknowledge of the bandpasses central wavelengths or of the presence of out-of-band leakages leads to biased cosmological measurements. Then, we present how to measure the filter throughputs at the required precision with a Collimated Beam Projector.

astro-ph.IM↗

arXiv2022

StarDICE I: sensor calibration bench and absolute photometric calibration of a Sony IMX411 sensor

The Hubble diagram of type-Ia supernovae (SNe-Ia) provides cosmological constraints on the nature of dark energy with an accuracy limited by the flux calibration of currently available spectrophotometric standards. The StarDICE experiment aims at establishing a 5-stage metrology chain from NIST photodiodes to stars, with a targeted accuracy of \SI{1}{mmag} in $griz$ colors. We present the first two stages, resulting in the calibration transfer from NIST photodiodes to a demonstration \SI{150}{Mpixel} CMOS sensor (Sony IMX411ALR as implemented in the QHY411M camera by QHYCCD). As a side-product, we provide full characterization of this camera. A fully automated spectrophotometric bench is built to perform the calibration transfer. The sensor readout electronics is studied using thousands of flat-field images from which we derive stability, high resolution photon transfer curves and estimates of the individual pixel gain. The sensor quantum efficiency is then measured relative to a NIST-calibrated photodiode. Flat-field scans at 16 different wavelengths are used to build maps of the sensor response. We demonstrate statistical uncertainty on quantum efficiency below \SI{0.001}{e^-/γ} between \SI{387}{nm} and \SI{950}{nm}. Systematic uncertainties in the bench optics are controlled at the level of \SI{1e-3}{e^-/γ}. Uncertainty in the overall normalization of the QE curve is 1\%. Regarding the camera we demonstrate stability in steady state conditions at the level of \SI{32.5}{ppm}. Homogeneity in the response is below \SI{1}{\percent} RMS across the entire sensor area. Quantum efficiency stays above \SI{50}{\percent} in most of the visible range, peaking well above \SI{80}{\percent} between \SI{440}{nm} and \SI{570}{nm}. Differential non-linearities at the level of \SI{1}{\percent} are detected. A simple 2-parameter model is proposed to mitigate the effect.

astro-ph.IM↗

arXiv2022

An Estimator for Lensing Potential from Galaxy Number Counts

We derive an estimator for the lensing potential from galaxy number counts which contains a linear and a quadratic term. We show that this estimator has a much larger signal-to-noise ratio than the corresponding estimator from intensity mapping. This is due to the additional lensing term in the number count angular power spectrum which is present already at linear order. We estimate the signal-to-noise ratio for future photometric surveys. Particularly at high redshifts, $z\gtrsim 1.5$, the signal to noise ratio can become of order 30. Therefore, the number counts in photometric surveys would be an excellent means to measure tomographic lensing spectra.

astro-ph.CO↗