Searcharxiv⌕ Search

arXiv subjects

Thomas C. Schmidt

Publications and source records attributed to Thomas C. Schmidt.

At least 91 records · Page 5Linked to original sources
arXiv2018

NDN, CoAP, and MQTT: A Comparative Measurement Study in the IoT

This paper takes a comprehensive view on the protocol stacks that are under debate for a future Internet of Things (IoT). It addresses the holistic question of which solution is beneficial for common IoT use cases. We deploy NDN and the two popular IP-based application protocols, CoAP and MQTT, in its different variants on a large-scale IoT testbed in single- and multi-hop scenarios. We analyze the use cases of scheduled periodic and unscheduled traffic under varying loads. Our findings indicate that (a) NDN admits the most resource-friendly deployment on nodes, and (b) shows superior robustness and resilience in multi-hop scenarios, while (c) the IP protocols operate at less overhead and higher speed in single-hop deployments. Most strikingly we find that NDN-based protocols are in significantly better flow balance than the UDP-based IP protocols and require less corrective actions.

cs.NI↗
arXiv2018

The Rise of Certificate Transparency and Its Implications on the Internet Ecosystem

In this paper, we analyze the evolution of Certificate Transparency (CT) over time and explore the implications of exposing certificate DNS names from the perspective of security and privacy. We find that certificates in CT logs have seen exponential growth. Website support for CT has also constantly increased, with now 33% of established connections supporting CT. With the increasing deployment of CT, there are also concerns of information leakage due to all certificates being visible in CT logs. To understand this threat, we introduce a CT honeypot and show that data from CT logs is being used to identify targets for scanning campaigns only minutes after certificate issuance. We present and evaluate a methodology to learn and validate new subdomains from the vast number of domains extracted from CT logged certificates.

cs.NI↗
arXiv2018

Simulation of Mixed Critical In-vehicular Networks

Future automotive applications ranging from advanced driver assistance to autonomous driving will largely increase demands on in-vehicular networks. Data flows of high bandwidth or low latency requirements, but in particular many additional communication relations will introduce a new level of complexity to the in-car communication system. It is expected that future communication backbones which interconnect sensors and actuators with ECU in cars will be built on Ethernet technologies. However, signalling from different application domains demands for network services of tailored attributes, including real-time transmission protocols as defined in the TSN Ethernet extensions. These QoS constraints will increase network complexity even further. Event-based simulation is a key technology to master the challenges of an in-car network design. This chapter introduces the domain-specific aspects and simulation models for in-vehicular networks and presents an overview of the car-centric network design process. Starting from a domain specific description language, we cover the corresponding simulation models with their workflows and apply our approach to a related case study for an in-car network of a premium car.

cs.NI↗
arXiv2018

MONICA in Hamburg: Towards Large-Scale IoT Deployments in a Smart City

Modern cities and metropolitan areas all over the world face new management challenges in the 21st century primarily due to increasing demands on living standards by the urban population. These challenges range from climate change, pollution, transportation, and citizen engagement, to urban planning, and security threats. The primary goal of a Smart City is to counteract these problems and mitigate their effects by means of modern ICT to improve urban administration and infrastructure. Key ideas are to utilise network communication to inter-connect public authorities; but also to deploy and integrate numerous sensors and actuators throughout the city infrastructure - which is also widely known as the Internet of Things (IoT). Thus, IoT technologies will be an integral part and key enabler to achieve many objectives of the Smart City vision. The contributions of this paper are as follows. We first examine a number of IoT platforms, technologies and network standards that can help to foster a Smart City environment. Second, we introduce the EU project MONICA which aims for demonstration of large-scale IoT deployments at public, inner-city events and give an overview on its IoT platform architecture. And third, we provide a case-study report on SmartCity activities by the City of Hamburg and provide insights on recent (on-going) field tests of a vertically integrated, end-to-end IoT sensor application.

cs.NI↗
arXiv2018

Towards a Rigorous Methodology for Measuring Adoption of RPKI Route Validation and Filtering

A proposal to improve routing security---Route Origin Authorization (ROA)---has been standardized. A ROA specifies which network is allowed to announce a set of Internet destinations. While some networks now specify ROAs, little is known about whether other networks check routes they receive against these ROAs, a process known as Route Origin Validation (ROV). Which networks blindly accept invalid routes? Which reject them outright? Which de-preference them if alternatives exist? Recent analysis attempts to use uncontrolled experiments to characterize ROV adoption by comparing valid routes and invalid routes. However, we argue that gaining a solid understanding of ROV adoption is impossible using currently available data sets and techniques. Our measurements suggest that, although some ISPs are not observed using invalid routes in uncontrolled experiments, they are actually using different routes for (non-security) traffic engineering purposes, without performing ROV. We conclude with a description of a controlled, verifiable methodology for measuring ROV and present three ASes that do implement ROV, confirmed by operators.

cs.NI↗
arXiv2018

HoPP: Robust and Resilient Publish-Subscribe for an Information-Centric Internet of Things

This paper revisits NDN deployment in the IoT with a special focus on the interaction of sensors and actuators. Such scenarios require high responsiveness and limited control state at the constrained nodes. We argue that the NDN request-response pattern which prevents data push is vital for IoT networks. We contribute HoP-and-Pull (HoPP), a robust publish-subscribe scheme for typical IoT scenarios that targets IoT networks consisting of hundreds of resource constrained devices at intermittent connectivity. Our approach limits the FIB tables to a minimum and naturally supports mobility, temporary network partitioning, data aggregation and near real-time reactivity. We experimentally evaluate the protocol in a real-world deployment using the IoT-Lab testbed with varying numbers of constrained devices, each wirelessly interconnected via IEEE 802.15.4 LowPANs. Implementations are built on CCN-lite with RIOT and support experiments using various single- and multi-hop scenarios.

cs.NI↗
arXiv2018

Connecting the World of Embedded Mobiles: The RIOT Approach to Ubiquitous Networking for the Internet of Things

The Internet of Things (IoT) is rapidly evolving based on low-power compliant protocol standards that extend the Internet into the embedded world. Pioneering implementations have proven it is feasible to inter-network very constrained devices, but had to rely on peculiar cross-layered designs and offer a minimalistic set of features. In the long run, however, professional use and massive deployment of IoT devices require full-featured, cleanly composed, and flexible network stacks. This paper introduces the networking architecture that turns RIOT into a powerful IoT system, to enable low-power wireless scenarios. RIOT networking offers (i) a modular architecture with generic interfaces for plugging in drivers, protocols, or entire stacks, (ii) support for multiple heterogeneous interfaces and stacks that can concurrently operate, and (iii) GNRC, its cleanly layered, recursively composed default network stack. We contribute an in-depth analysis of the communication performance and resource efficiency of RIOT, both on a micro-benchmarking level as well as by comparing IoT communication across different platforms. Our findings show that, though it is based on significantly different design trade-offs, the networking subsystem of RIOT achieves a performance equivalent to that of Contiki and TinyOS, the two operating systems which pioneered IoT software platforms.

cs.NI↗
arXiv2017

OpenCL Actors - Adding Data Parallelism to Actor-based Programming with CAF

The actor model of computation has been designed for a seamless support of concurrency and distribution. However, it remains unspecific about data parallel program flows, while available processing power of modern many core hardware such as graphics processing units (GPUs) or coprocessors increases the relevance of data parallelism for general-purpose computation. In this work, we introduce OpenCL-enabled actors to the C++ Actor Framework (CAF). This offers a high level interface for accessing any OpenCL device without leaving the actor paradigm. The new type of actor is integrated into the runtime environment of CAF and gives rise to transparent message passing in distributed systems on heterogeneous hardware. Following the actor logic in CAF, OpenCL kernels can be composed while encapsulated in C++ actors, hence operate in a multi-stage fashion on data resident at the GPU. Developers are thus enabled to build complex data parallel programs from primitives without leaving the actor paradigm, nor sacrificing performance. Our evaluations on commodity GPUs, an Nvidia TESLA, and an Intel PHI reveal the expected linear scaling behavior when offloading larger workloads. For sub-second duties, the efficiency of offloading was found to largely differ between devices. Moreover, our findings indicate a negligible overhead over programming with the native OpenCL API.

cs.DC↗
arXiv2016

Amplification and DRDoS Attack Defense -- A Survey and New Perspectives

The severity of amplification attacks has grown in recent years. Since 2013 there have been at least two attacks which involved over 300Gbps of attack traffic. This paper offers an analysis of these and many other amplification attacks. We compare a wide selection of different proposals for detecting and preventing amplification attacks, as well as proposals for tracing the attackers. Since source IP spoofing plays an important part in almost all of the attacks mentioned, a survey on the state of the art in spoofing defenses is also presented. This work acts as an introduction into amplification attacks and source IP address spoofing. By combining previous works into a single comprehensive bibliography, and with our concise discussion, we hope to prevent redundant work and encourage others to find practical solutions for defending against future amplification attacks.

cs.NI↗
arXiv2016

CAIR: Using Formal Languages to Study Routing, Leaking, and Interception in BGP

The Internet routing protocol BGP expresses topological reachability and policy-based decisions simultaneously in path vectors. A complete view on the Internet backbone routing is given by the collection of all valid routes, which is infeasible to obtain due to information hiding of BGP, the lack of omnipresent collection points, and data complexity. Commonly, graph-based data models are used to represent the Internet topology from a given set of BGP routing tables but fall short of explaining policy contexts. As a consequence, routing anomalies such as route leaks and interception attacks cannot be explained with graphs. In this paper, we use formal languages to represent the global routing system in a rigorous model. Our CAIR framework translates BGP announcements into a finite route language that allows for the incremental construction of minimal route automata. CAIR preserves route diversity, is highly efficient, and well-suited to monitor BGP path changes in real-time. We formally derive implementable search patterns for route leaks and interception attacks. In contrast to the state-of-the-art, we can detect these incidents. In practical experiments, we analyze public BGP data over the last seven years.

cs.NI↗
arXiv2016

A Case for Time Slotted Channel Hopping for ICN in the IoT

Recent proposals to simplify the operation of the IoT include the use of Information Centric Networking (ICN) paradigms. While this is promising, several challenges remain. In this paper, our core contributions (a) leverage ICN communication patterns to dynamically optimize the use of TSCH (Time Slotted Channel Hopping), a wireless link layer technology increasingly popular in the IoT, and (b) make IoT-style routing adaptive to names, resources, and traffic patterns throughout the network--both without cross-layering. Through a series of experiments on the FIT IoT-LAB interconnecting typical IoT hardware, we find that our approach is fully robust against wireless interference, and almost halves the energy consumed for transmission when compared to CSMA. Most importantly, our adaptive scheduling prevents the time-slotted MAC layer from sacrificing throughput and delay.

cs.NI↗
arXiv2015

TRAIL: Topology Authentication in RPL

The IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) was recently introduced as the new routing standard for the Internet of Things. Although RPL defines basic security modes, it remains vulnerable to topological attacks which facilitate blackholing, interception, and resource exhaustion. We are concerned with analyzing the corresponding threats and protecting future RPL deployments from such attacks. Our contributions are twofold. First, we analyze the state of the art, in particular the protective scheme VeRA and present two new rank order attacks as well as extensions to mitigate them. Second, we derive and evaluate TRAIL, a generic scheme for topology authentication in RPL. TRAIL solely relies on the basic assumptions of RPL that (1) the root node serves as a trust anchor and (2) each node interconnects to the root as part of a hierarchy. Using proper reachability tests, TRAIL scalably and reliably identifies any topological attacker without strong cryptographic efforts.

cs.NI↗
arXiv2015

RiPKI: The Tragic Story of RPKI Deployment in the Web Ecosystem

Web content delivery is one of the most important services on the Internet. Access to websites is typically secured via TLS. However, this security model does not account for prefix hijacking on the network layer, which may lead to traffic blackholing or transparent interception. Thus, to achieve comprehensive security and service availability, additional protective mechanisms are necessary such as the RPKI, a recently deployed Resource Public Key Infrastructure to prevent hijacking of traffic by networks. This paper argues two positions. First, that modern web hosting practices make route protection challenging due to the propensity to spread servers across many different networks, often with unpredictable client redirection strategies, and, second, that we need a better understanding why protection mechanisms are not deployed. To initiate this, we empirically explore the relationship between web hosting infrastructure and RPKI deployment. Perversely, we find that less popular websites are more likely to be secured than the prominent sites. Worryingly, we find many large-scale CDNs do not support RPKI, thus making their customers vulnerable. This leads us to explore business reasons why operators are hesitant to deploy RPKI, which may help to guide future research on improving Internet security.

cs.NI↗
arXiv2015

Revisiting Actor Programming in C++

The actor model of computation has gained significant popularity over the last decade. Its high level of abstraction makes it appealing for concurrent applications in parallel and distributed systems. However, designing a real-world actor framework that subsumes full scalability, strong reliability, and high resource efficiency requires many conceptual and algorithmic additives to the original model. In this paper, we report on designing and building CAF, the "C++ Actor Framework". CAF targets at providing a concurrent and distributed native environment for scaling up to very large, high-performance applications, and equally well down to small constrained systems. We present the key specifications and design concepts---in particular a message-transparent architecture, type-safe message interfaces, and pattern matching facilities---that make native actors a viable approach for many robust, elastic, and highly distributed developments. We demonstrate the feasibility of CAF in three scenarios: first for elastic, upscaling environments, second for including heterogeneous hardware like GPGPUs, and third for distributed runtime systems. Extensive performance evaluations indicate ideal runtime behaviour for up to 64 cores at very low memory footprint, or in the presence of GPUs. In these tests, CAF continuously outperforms the competing actor environments Erlang, Charm++, SalsaLite, Scala, ActorFoundry, and even the OpenMPI.

cs.PL↗
arXiv2015

The Abandoned Side of the Internet: Hijacking Internet Resources When Domain Names Expire

The vulnerability of the Internet has been demonstrated by prominent IP prefix hijacking events. Major outages such as the China Telecom incident in 2010 stimulate speculations about malicious intentions behind such anomalies. Surprisingly, almost all discussions in the current literature assume that hijacking incidents are enabled by the lack of security mechanisms in the inter-domain routing protocol BGP. In this paper, we discuss an attacker model that accounts for the hijacking of network ownership information stored in Regional Internet Registry (RIR) databases. We show that such threats emerge from abandoned Internet resources (e.g., IP address blocks, AS numbers). When DNS names expire, attackers gain the opportunity to take resource ownership by re-registering domain names that are referenced by corresponding RIR database objects. We argue that this kind of attack is more attractive than conventional hijacking, since the attacker can act in full anonymity on behalf of a victim. Despite corresponding incidents have been observed in the past, current detection techniques are not qualified to deal with these attacks. We show that they are feasible with very little effort, and analyze the risk potential of abandoned Internet resources for the European service region: our findings reveal that currently 73 /24 IP prefixes and 7 ASes are vulnerable to be stealthily abused. We discuss countermeasures and outline research directions towards preventive solutions.

cs.NI↗
arXiv2014

Information Centric Networking in the IoT: Experiments with NDN in the Wild

This paper explores the feasibility, advantages, and challenges of an ICN-based approach in the Internet of Things. We report on the first NDN experiments in a life-size IoT deployment, spread over tens of rooms on several floors of a building. Based on the insights gained with these experiments, the paper analyses the shortcomings of CCN applied to IoT. Several interoperable CCN enhancements are then proposed and evaluated. We significantly decreased control traffic (i.e., interest messages) and leverage data path and caching to match IoT requirements in terms of energy and bandwidth constraints. Our optimizations increase content availability in case of IoT nodes with intermittent activity. This paper also provides the first experimental comparison of CCN with the common IoT standards 6LoWPAN/RPL/UDP.

cs.NI↗
arXiv2014

The Role of the Internet of Things in Network Resilience

Disasters lead to devastating structural damage not only to buildings and transport infrastructure, but also to other critical infrastructure, such as the power grid and communication backbones. Following such an event, the availability of minimal communication services is however crucial to allow efficient and coordinated disaster response, to enable timely public information, or to provide individuals in need with a default mechanism to post emergency messages. The Internet of Things consists in the massive deployment of heterogeneous devices, most of which battery-powered, and interconnected via wireless network interfaces. Typical IoT communication architectures enables such IoT devices to not only connect to the communication backbone (i.e. the Internet) using an infrastructure-based wireless network paradigm, but also to communicate with one another autonomously, without the help of any infrastructure, using a spontaneous wireless network paradigm. In this paper, we argue that the vast deployment of IoT-enabled devices could bring benefits in terms of data network resilience in face of disaster. Leveraging their spontaneous wireless networking capabilities, IoT devices could enable minimal communication services (e.g. emergency micro-message delivery) while the conventional communication infrastructure is out of service. We identify the main challenges that must be addressed in order to realize this potential in practice. These challenges concern various technical aspects, including physical connectivity requirements, network protocol stack enhancements, data traffic prioritization schemes, as well as social and political aspects.

cs.NI↗