arXiv subjects

Thomas Sand Jespersen

Publications and source records attributed to Thomas Sand Jespersen.

18 recordsLinked to original sources

arXiv2026

Spin Hall and Edelstein effects in a ballistic quantum dot with Rashba spin-orbit coupling

We study spin-resolved transport in a ballistic quantum dot with Rashba spin-orbit coupling, focusing on charge-to-spin conversion and spin Hall effect. In the regime where the dot size is comparable to the Fermi wavelength, we identify a clear crossover from weak localization to weak antilocalization as the Rashba coupling increases. This transition is accompanied by gate-tunable spin currents of Edelstein and spin Hall type, whose behavior reflects the underlying electron wavefunction interference. Notably, the Edelstein current shows an inflection point at the critical Rashba strength, signaling the crossover from weak localization to weak antilocalization. In the presence of an in-plane magnetic field we also report a transition in angular periodicity of the magnetoresistance -- from $\pi$ to $2\pi$ -- arising from the interplay between spin-orbit interaction and Zeeman coupling. These results establish a direct link between quantum coherence, charge-to-spin conversion, and geometric confinement in mesoscopic systems.

cond-mat.mes-hall↗

arXiv2026

Instability-driven mechanically locked states in functional oxide membranes

Mechanical instabilities in thin solids offer a powerful route to engineer nonlinear responses, yet their controlled use in functional crystalline oxides has remained largely unexplored. Notably, by changing the aspect ratio of solids, the energy landscape around equilibrium can be modified to induce non-linearities under lateral stresses through non-lateral deformations. These nonlinear systems can develop multiple local energy minima where the system can settle and switch between states through the application of a driving force. Crucially, recent advances in oxide thin film growth have enabled the fabrication of freestanding oxide membranes, paving a viable path for their use in bistable architecture, particularly at the nanoscale. Here, we demonstrate that freestanding oxide membranes, such as SrTiO3 (STO) and BaTiO3 (BTO), relax into well-defined metastable buckling states when transferred onto lithographically defined cavities. The membrane deformation is determined by the interplay between built-in residual strain, bending stiffness, and cavity geometry, resulting in reproducible bistable states with distinct strain distributions. Using a combination of atomic force microscopy, in-contact Kelvin probe measurements, and finite-element modelling, we reveal that these mechanically locked states directly shape the electromechanical potential landscape of ferroelectric BaTiO3. We further demonstrate reversible snapthrough transitions between mechanically degenerate states, establishing complex oxides as deterministic, geometry-tunable building blocks for nonlinear nanoelectromechanical architectures. Our results illustrate a general strategy for exploiting mechanical instabilities to encode and manipulate functional responses in ultrathin crystalline membranes.

cond-mat.mtrl-sci↗

arXiv2025

Leveraging high fluence and low pressure for pulsed laser deposition of high-mobility $γ$-Al$_2$O$_3$/SrTiO$_3$ heterostructure growth

High-mobility oxide heterostructures could be applied for high-frequency devices, transparent conductors, and spin-orbit logic devices. SrTiO$_3$ is one of the most studied oxide substrate materials for heterostructures. To date, the highest SrTiO3-based charge carrier mobility at 2 K was measured in the interfacial 2-dimensional electron gas (2DEG) of $γ$-Al$_2$O$_3$/SrTiO$_3$. The formation mechanism and origin of the high electron mobility are not yet fully understood. This investigation presents a successful growth protocol to synthesise high mobility $γ$-Al$_2$O$_3$/SrTiO$_3$ interfaces, and a description of the underlying growth optimisation. Furthermore, indicative features of high-mobility $γ$-Al$_2$O$_3$/SrTiO$_3$, including the room-temperature sheet resistance, are presented. Signs of epitaxial and crystalline growth are found in a high-mobility sample ($μ^{10K} = 1.6 \times 10^4 \mathrm{cm}^2/\mathrm{Vs}$). Outlining the growth mechanisms and comparing 40 samples, indicates that high-fluence ($F > 3\mathrm{J}/\mathrm{cm}^2$) and low pressure ($P \approx 1 \times 10^{-6} \mathrm{mbar}$) are essential growth parameters for high-mobility $γ$-Al$_2$O$_3$/SrTiO$_3$ interfaces. $γ$-Al$_2$O$_3$ having single-element cations allows higher laser fluences during growth, compared to thin films with multi-element cations such as LaAlO$_3$, without causing stoichiometric imbalances.

cond-mat.mtrl-sci↗

arXiv2025

Phase controlled multi-terminal Josephson junction in ternary hybrid nanowire

This work presents multiterminal Josephson junctions in hybrid semiconductor-superconductor InAsSb-Al nanocrosses. Hybrid nanocrosses are grown using molecular beam epitaxy and are formed through As-assisted merging of oppositely directed InAsSb nanowires. We explain this complex ternary merging mechanism using a temperature-dependent phase diagram and investigate the detailed crystal structure with atomic-resolution imaging. The hybrid nanoscrosses enabled the fabrication of multiterminal Josephson junction devices, which were characterized at low temperatures. The supercurrent through each terminal combination was measured as a function of the density in the junction and the relative phase of the terminals, which was controlled by an external magnetic field.

cond-mat.mtrl-sci↗

arXiv2025

Cryogenic performance of field-effect transistors and amplifiers based on selective area grown InAs nanowires

Indium-Arsenide (InAs) nanowire field-effect transistors (NWFETs) are promising platforms for high-speed, low-power nanoelectronics operating at cryogenic conditions, relevant for quantum information processing. We use selective area growth (SAG) of nanowires to realize scalable and planar nanowire device geometries that are compatible with standard semiconductor processing techniques. NWFETs are fabricated and their low temperature characteristics - including ION/IOFF ratios, threshold voltages, sub-threshold slope, interfacial trap density, hysteresis, and mobility - are characterized. The NWFETs operate effectively in integrated circuitry relying on saturation-mode operation. In sub-threshold applications such as amplifiers, we find bandwidths exceeding our cryostat wiring, but the gate hysteresis presents challenges for precise tuning of the amplifier operating point. We discuss the role of crystal imperfections and fabrication processes on the transistor characteristics and propose strategies for further improvements.

cond-mat.mes-hall↗

arXiv2025

Magnetism and nonlinear charge transport in NiFe2O4/{\gamma}-Al2O3/SrTiO3 heterostructure: Toward Spintronic Applications

We present the synthesis and study of the magnetic and electronic properties of NiFe2O4/{\gamma}-Al2O3/SrTiO3 heterostructure. The {\gamma}-Al2O3/SrTiO3 interface hosts a high-mobility two-dimensional electron gas (2DEG) with large spin-orbit coupling, making it promising for spintronics applications if it can be coupled to a suitable source of spin currents. Here, we synthesize a ferrimagnetic insulating NiFe2O4(001) layer on {\gamma}-Al2O3(001)/SrTiO3(001) using a low-temperature reactive sputtering at 150 deg C without compromising the mobility and charge carrier density of the 2DEG at the {\gamma}-Al2O3(001)/SrTiO3(001) interface. The sheet resistance of both {\gamma}-Al2O3/SrTiO3 and NiFe2O4/{\gamma}-Al2O3/SrTiO3 exhibits metallic behavior down to cryogenic temperatures, with a low temperature upturn driven by the Kondo-like scattering. Most importantly, NiFe2O4/{\gamma}-Al2O3/SrTiO3 behaves as a magnetic diode at low temperatures, and its rectification performance increases significantly with increasing magnetic field strength giving rise to a robust magneto-electronic rectification effect at low temperatures, which provides a first step towards the development of all-oxide heterostructures capable of efficient spin-charge conversion.

cond-mat.mtrl-sci↗

arXiv2025

$μ_\mathrm{2T}(n)$: A Method for Extracting the Density Dependent Mobility in Two-Terminal Nanodevices

Measuring carrier mobility as a function of the carrier density in semiconductors using Hall effect is the gold standard for quantifying scattering mechanisms. However, for nanostructures, the Hall effect is not applicable, and the density dependence of mobility is generally inaccessible, rendering Hall effect measurements impractical. Here, we present $μ_\mathrm{2T}(n)$, a new procedure allowing us to extract the density dependent mobility in two-terminal measured nano scale field effect transistors at zero magnetic field from conventional conductance vs gate voltage measurements. We validate $μ_\mathrm{2T}$ against standard Hall measurements and then apply the procedure to 256 individual two-terminal InAs nanowire FETs, extracting information about the scattering mechanisms. To illustrate its broad utility, we reanalyze published data in which mobility had been treated as density independent. Our method represents a new powerful tool for optimization and development of nanomaterials crucial for a wide range of new technologies.

cond-mat.mes-hall↗

arXiv2024

Statistical Reproducibility of Selective Area Grown InAs Nanowire Devices

New approaches such as selective area growth, where crystal growth is lithographically controlled, allow the integration of bottom-up grown semiconductor nanomaterials in large-scale classical and quantum nanoelectronics. This calls for assessment and optimization of the reproducibility between individual components. We quantify the structural and electronic statistical reproducibility within large arrays of nominally identical selective area growth InAs nanowires. The distribution of structural parameters is acquired through comprehensive atomic force microscopy studies and transmission electron microscopy. These are compared to the statistical distributions of the cryogenic electrical properties of 256 individual SAG nanowire field effect transistors addressed using cryogenic multiplexer circuits. Correlating measurements between successive thermal cycles allows distinguishing between the contributions of surface impurity scattering and fixed structural properties to device reproducibility. The results confirm the potential of SAG nanomaterials, and the methodologies for quantifying statistical metrics are essential for further optimization of reproducibility.

physics.app-ph↗

arXiv2023

Cryogenic Multiplexing with Bottom-Up Nanowires

Bottom-up grown nanomaterials play an integral role in the development of quantum technologies. Among these, semiconductor nanowires (NWs) are widely used in proof-of-principle experiments, however, difficulties in parallel processing of conventionally-grown NWs makes scalability unfeasible. Here, we harness selective area growth (SAG) to remove this road-block. We demonstrate large scale integrated SAG NW circuits consisting of 512 channel multiplexer/demultiplexer pairs, incorporating thousands of interconnected SAG NWs operating under deep cryogenic conditions. Multiplexers enable a range of new strategies in quantum device research and scaling by increase the device count while limiting the number of connections between room-temperature control electronics and the cryogenic samples. As an example of this potential we perform a statistical characterization of large arrays of identical SAG quantum dots thus establishing the feasibility of applying cross-bar gating strategies for efficient scaling of future SAG quantum circuits.

cond-mat.mes-hall↗

arXiv2022

Photon assisted tunneling of high order multiple Andreev reflections in epitaxial nanowire Josephson junctions

Semiconductor/superconductor hybrids exhibit a range of phenomena that can be exploited for the study of novel physics and the development of new technologies. Understanding the origin the energy spectrum of such hybrids is therefore a crucial goal. Here, we study Josephson junctions defined by shadow epitaxy on InAsSb/Al nanowires. The devices exhibit gate-tunable supercurrents at low temperatures and multiple Andreev reflections (MARs) at finite voltage bias. Under microwave irradiation, photon assisted tunneling (PAT) of MARs produces characteristic oscillating sidebands at quantized energies, which depend on MAR order, $n$, in agreement with a recently suggested modification of the classical Tien-Gordon equation. The scaling of the quantized energy spacings with microwave frequency provides independent confirmation of the effective charge $ne$ transferred by the $n^\mathrm{th}$ order tunnel process. The measurements suggest PAT as a powerful method for assigning the origin of low energy spectral features in hybrid Josephson devices.

cond-mat.mes-hall↗

arXiv2022

Doubling the mobility of InAs/InGaAs selective area grown nanowires

Selective area growth (SAG) of nanowires and networks promise a route toward scalable electronics, photonics and quantum devices based on III-V semiconductor materials. The potential of high-mobility SAG nanowires however is not yet fully realized, since interfacial roughness, misfit dislocations at the nanowire/substrate interface and non-uniform composition due to material intermixing all scatter electrons. Here, we explore SAG of highly lattice-mismatched InAs nanowires on insulating GaAs(001) substrates and address these key challenges. Atomically smooth nanowire/substrate interfaces are achieved with the use of atomic hydrogen (a-H) as an alternative to conventional thermal annealing for the native oxide removal. The problem of high lattice mismatch is addressed through an In$_x$Ga$_{1-x}$As buffer layer introduced between the InAs transport channel and the GaAs substrate. The Ga-In material intermixing observed in both the buffer layer and the channel is inhibited via careful tuning of the growth temperature. Performing scanning transmission electron microscopy and x-ray diffraction analysis along with low-temperature transport measurements we show that optimized In-rich buffer layers promote high quality InAs transport channels with the field-effect electron mobility over~10000~cm$^2$V$^{-1}$s$^{-1}$. This is twice as high as for non-optimized samples and among the highest reported for InAs selective area grown nanostructures.

cond-mat.mtrl-sci↗

arXiv2021

Superconductivity and parity preservation in as-grown In islands on InAs nanowires

We report in-situ synthesis of crystalline indium islands on InAs nanowires grown by molecular beam epitaxy. Structural analysis by transmission electron microscopy showed that In crystals grew in a tetragonal body-centred crystal structure within two families of orientations relative to wurtzite InAs. The crystalline islands had lengths < 500 nm and low-energy surfaces, suggesting that growth was driven mainly by surface energy minimization. Electrical transport through In/InAs devices exhibited Cooper pair charging, evidencing charge parity preservation and a pristine In/InAs interface, with an induced superconducting gap ~ 0.45 meV. Cooper pair charging persisted to temperatures > 1.2 K and magnetic fields ~ 0.7 T, demonstrating that In/InAs hybrids belong to an expanding class of semiconductor/superconductor hybrids operating over a wider parameter space than state-of-the-art Al-based hybrids. Engineering crystal morphology while isolating single islands using shadow epitaxy provides an interesting alternative to previous semiconductor/superconductor hybrid morphologies and device geometries.

cond-mat.mes-hall↗

arXiv2020

Shadow epitaxy for in-situ growth of generic semiconductor/superconductor devices

Uniform, defect-free crystal interfaces and surfaces are crucial ingredients for realizing high-performance nanoscale devices. A pertinent example is that advances in gate-tunable and topological superconductivity using semiconductor/superconductor electronic devices are currently built on the hard proximity-induced superconducting gap obtained from epitaxial indium arsenide/aluminium heterostructures. Fabrication of devices requires selective etch processes; these exist only for InAs/Al hybrids, precluding the use of other, potentially superior material combinations. We present a crystal growth platform -- based on three-dimensional structuring of growth substrates -- which enables synthesis of semiconductor nanowire hybrids with in-situ patterned superconductor shells. This platform eliminates the need for etching, thereby enabling full freedom in choice of hybrid constituents. We realise and characterise all the most frequently used architectures in superconducting hybrid devices, finding increased yield and electrostatic stability compared to etched devices, along with evidence of ballistic superconductivity. In addition to aluminium, we present hybrid devices based on tantalum, niobium and vanadium. This is the submitted version of the manuscript. The accepted, peer reviewed version is available from Advanced Materials: http://doi.org/10.1002/adma.201908411 Previous title: Shadow lithography for in-situ growth of generic semiconductor/superconductor devices

cond-mat.mes-hall↗

arXiv2019

On the emergence of conductivity at SrTiO3-based oxide interfaces -- an in-situ study

Heterostructures and crystal interfaces play a major role in state-of-the-art semiconductor devices and play a central role in the field of oxide electronics. In oxides the link between the microscopic properties of the interfaces and bulk properties of the resulting heterostructures challenge our fundamental understanding. Insights on the early growth stage of interfaces and its influence on resulting physical properties are scarce -- typically the information is inferred from post growth characterization. Here, we report on real time measurements of the transport properties of SrTiO3-based heterostructures while the crystal heterostructure is forming. Surprisingly, we detect a conducting interface already at the initial growth stage, much earlier than the well-established critical thickness limit for observing conductivity ex-situ after sample growth. We investigate how the conductivity depends on various physical processes occurring during pulsed laser depositions, including light illumination, particle bombardment by the plasma plume, interactions with the atmosphere and oxygen migration from SrTiO3 to the thin films of varying compositions. Using this approach, we propose a new design tool to control the electrical properties of interfaces in real time during their formation.

cond-mat.mtrl-sci↗

arXiv2017

Engineering Hybrid Epitaxial InAsSb/Al Nanowire Materials for Stronger Topological Protection

The combination of strong spin-orbit coupling, large $g$-factors, and the coupling to a superconductor can be used to create a topologically protected state in a semiconductor nanowire. Here we report on growth and characterization of hybrid epitaxial InAsSb/Al nanowires, with varying composition and crystal structure. We find the strongest spin-orbit interaction at intermediate compositions in zincblende InAs$_{1-x}$Sb$_{x}$ nanowires, exceeding that of both InAs and InSb materials, confirming recent theoretical studies \cite{winkler2016topological}. We show that the epitaxial InAsSb/Al interfaces allows for a hard induced superconducting gap and 2$e$ transport in Coulomb charging experiments, similar to experiments on InAs/Al and InSb/Al materials, and find measurements consistent with topological phase transitions at low magnetic fields due to large effective $g$-factors. Finally we present a method to grow pure wurtzite InAsSb nanowires which are predicted to exhibit even stronger spin-orbit coupling than the zincblende structure.

cond-mat.mes-hall↗

arXiv2016

Quantization of Hall Resistance at the Metallic Interface between an Oxide Insulator and SrTiO$_{3}$

The two-dimensional metal forming at the interface between an oxide insulator and SrTiO3 provides new opportunities for oxide electronics. However, the quantum Hall effect, one of the most fascinating effects of electrons confined in two dimensions, remains underexplored at these complex oxide heterointerfaces. Here, we report the experimental observation of quantized Hall resistance in a SrTiO3 heterointerface based on the modulation-doped amorphous-LaAlO$_{3}$/SrTiO$_{3}$ heterostructure, which exhibits both high electron mobility exceeding 10000 cm$^{2}$/Vs and low carrier density on the order of ~10$^{12}$ cm$^{-2}$. Along with unambiguous Shubnikov-de Haas oscillations, the spacing of the quantized Hall resistance suggests that the interface is comprised of a single quantum well with ten parallel conducting two-dimensional subbands. This provides new insight into the electronic structure of conducting oxide interfaces and represents an important step towards designing and understanding advanced oxide devices.

cond-mat.mtrl-sci↗

arXiv2016

Patterning of high mobility electron gases at complex oxide interfaces

Oxide interfaces provide an opportunity for electronics. However, patterning of electron gases at complex oxide interfaces is challenging. In particular, patterning of complex oxides while preserving a high electron mobility remains underexplored and inhibits the study of quantum mechanical effects where extended electron mean free paths are paramount. This letter presents an effective patterning strategy of both the amorphous-LaAlO$_3$/SrTiO$_3$ (a-LAO/STO) and modulation-doped amorphous- LaAlO$_3$/La$_{7/8}$Sr$_{1/8}$MnO$_3$/SrTiO$_3$ (a-LAO/LSM/STO) oxide interfaces. Our patterning is based on selective wet etching of amorphous-LSM (a-LSM) thin films which acts as a hard mask during subsequent depositions. Strikingly, the patterned modulation-doped interface shows electron mobilities up to ~8,700 cm$^2$/Vs at 2 K, which is among the highest reported values for patterned conducting complex oxide interfaces that usually are ~1,000 cm$^2$/Vs at 2 K.

cond-mat.mtrl-sci↗

arXiv2010

Gate-dependent spin-orbit coupling in multi-electron carbon nanotubes

Understanding how the orbital motion of electrons is coupled to the spin degree of freedom in nanoscale systems is central for applications in spin-based electronics and quantum computation. We demonstrate this coupling of spin and orbit in a carbon nanotube quantum dot in the general multi-electron regime in presence of finite disorder. Further, we find a strong systematic dependence of the spin-orbit coupling on the electron occupation of the quantum dot. This dependence, which even includes a sign change is not demonstrated in any other system and follows from the curvature-induced spin-orbit split Dirac-spectrum of the underlying graphene lattice. Our findings unambiguously show that the spin-orbit coupling is a general property of nanotube quantum dots which provide a unique platform for the study of spin-orbit effects and their applications.

cond-mat.mes-hall↗