arXiv subjects

Tianyue Zheng

Publications and source records attributed to Tianyue Zheng.

27 records · Page 2Linked to original sources

arXiv2023

MUSE-Fi: Contactless MUti-person SEnsing Exploiting Near-field Wi-Fi Channel Variation

Having been studied for more than a decade, Wi-Fi human sensing still faces a major challenge in the presence of multiple persons, simply because the limited bandwidth of Wi-Fi fails to provide a sufficient range resolution to physically separate multiple subjects. Existing solutions mostly avoid this challenge by switching to radars with GHz bandwidth, at the cost of cumbersome deployments. Therefore, could Wi-Fi human sensing handle multiple subjects remains an open question. This paper presents MUSE-Fi, the first Wi-Fi multi-person sensing system with physical separability. The principle behind MUSE-Fi is that, given a Wi-Fi device (e.g., smartphone) very close to a subject, the near-field channel variation caused by the subject significantly overwhelms variations caused by other distant subjects. Consequently, focusing on the channel state information (CSI) carried by the traffic in and out of this device naturally allows for physically separating multiple subjects. Based on this principle, we propose three sensing strategies for MUSE-Fi: i) uplink CSI, ii) downlink CSI, and iii) downlink beamforming feedback, where we specifically tackle signal recovery from sparse (per-user) traffic under realistic multi-user communication scenarios. Our extensive evaluations clearly demonstrate that MUSE-Fi is able to successfully handle multi-person sensing with respect to three typical applications: respiration monitoring, gesture detection, and activity recognition.

cs.NI↗

arXiv2023

AutoFed: Heterogeneity-Aware Federated Multimodal Learning for Robust Autonomous Driving

Object detection with on-board sensors (e.g., lidar, radar, and camera) play a crucial role in autonomous driving (AD), and these sensors complement each other in modalities. While crowdsensing may potentially exploit these sensors (of huge quantity) to derive more comprehensive knowledge, \textit{federated learning} (FL) appears to be the necessary tool to reach this potential: it enables autonomous vehicles (AVs) to train machine learning models without explicitly sharing raw sensory data. However, the multimodal sensors introduce various data heterogeneity across distributed AVs (e.g., label quantity skews and varied modalities), posing critical challenges to effective FL. To this end, we present AutoFed as a heterogeneity-aware FL framework to fully exploit multimodal sensory data on AVs and thus enable robust AD. Specifically, we first propose a novel model leveraging pseudo-labeling to avoid mistakenly treating unlabeled objects as the background. We also propose an autoencoder-based data imputation method to fill missing data modality (of certain AVs) with the available ones. To further reconcile the heterogeneity, we finally present a client selection mechanism exploiting the similarities among client models to improve both training stability and convergence rate. Our experiments on benchmark dataset confirm that AutoFed substantially improves over status quo approaches in both precision and recall, while demonstrating strong robustness to adverse weather conditions.

cs.LG↗

arXiv2021

MoRe-Fi: Motion-robust and Fine-grained Respiration Monitoring via Deep-Learning UWB Radar

Crucial for healthcare and biomedical applications, respiration monitoring often employs wearable sensors in practice, causing inconvenience due to their direct contact with human bodies. Therefore, researchers have been constantly searching for contact-free alternatives. Nonetheless, existing contact-free designs mostly require human subjects to remain static, largely confining their adoptions in everyday environments where body movements are inevitable. Fortunately, radio-frequency (RF) enabled contact-free sensing, though suffering motion interference inseparable by conventional filtering, may offer a potential to distill respiratory waveform with the help of deep learning. To realize this potential, we introduce MoRe-Fi to conduct fine-grained respiration monitoring under body movements. MoRe-Fi leverages an IR-UWB radar to achieve contact-free sensing, and it fully exploits the complex radar signal for data augmentation. The core of MoRe-Fi is a novel variational encoder-decoder network; it aims to single out the respiratory waveforms that are modulated by body movements in a non-linear manner. Our experiments with 12 subjects and 66-hour data demonstrate that MoRe-Fi accurately recovers respiratory waveform despite the interference caused by body movements. We also discuss potential applications of MoRe-Fi for pulmonary disease diagnoses.

cs.LG↗

arXiv2021

RF-Net: a Unified Meta-learning Framework for RF-enabled One-shot Human Activity Recognition

Radio-Frequency (RF) based device-free Human Activity Recognition (HAR) rises as a promising solution for many applications. However, device-free (or contactless) sensing is often more sensitive to environment changes than device-based (or wearable) sensing. Also, RF datasets strictly require on-line labeling during collection, starkly different from image and text data collections where human interpretations can be leveraged to perform off-line labeling. Therefore, existing solutions to RF-HAR entail a laborious data collection process for adapting to new environments. To this end, we propose RF-Net as a meta-learning based approach to one-shot RF-HAR; it reduces the labeling efforts for environment adaptation to the minimum level. In particular, we first examine three representative RF sensing techniques and two major meta-learning approaches. The results motivate us to innovate in two designs: i) a dual-path base HAR network, where both time and frequency domains are dedicated to learning powerful RF features including spatial and attention-based temporal ones, and ii) a metric-based meta-learning framework to enhance the fast adaption capability of the base network, including an RF-specific metric module along with a residual classification module. We conduct extensive experiments based on all three RF sensing techniques in multiple real-world indoor environments; all results strongly demonstrate the efficacy of RF-Net compared with state-of-the-art baselines.

eess.SP↗

arXiv2021

Enhancing RF Sensing with Deep Learning: A Layered Approach

In recent years, radio frequency (RF) sensing has gained increasing popularity due to its pervasiveness, low cost, non-intrusiveness, and privacy preservation. However, realizing the promises of RF sensing is highly nontrivial, given typical challenges such as multipath and interference. One potential solution leverages deep learning to build direct mappings from the RF domain to target domains, hence avoiding complex RF physical modeling. While earlier solutions exploit only simple feature extraction and classification modules, an emerging trend adds functional layers on top of elementary modules for more powerful generalizability and flexible applicability. To better understand this potential, this article takes a layered approach to summarize RF sensing enabled by deep learning. Essentially, we present a four-layer framework: physical, backbone, generalization, and application. While this layered framework provides readers a systematic methodology for designing deep interpreted RF sensing, it also facilitates making improvement proposals and hints at future research opportunities.

eess.SP↗

arXiv2021

RF-Based Human Activity Recognition Using Signal Adapted Convolutional Neural Network

Human Activity Recognition (HAR) plays a critical role in a wide range of real-world applications, and it is traditionally achieved via wearable sensing. Recently, to avoid the burden and discomfort caused by wearable devices, device-free approaches exploiting RF signals arise as a promising alternative for HAR. Most of the latest device-free approaches require training a large deep neural network model in either time or frequency domain, entailing extensive storage to contain the model and intensive computations to infer activities. Consequently, even with some major advances on device-free HAR, current device-free approaches are still far from practical in real-world scenarios where the computation and storage resources possessed by, for example, edge devices, are limited. Therefore, we introduce HAR-SAnet which is a novel RF-based HAR framework. It adopts an original signal adapted convolutional neural network architecture: instead of feeding the handcraft features of RF signals into a classifier, HAR-SAnet fuses them adaptively from both time and frequency domains to design an end-to-end neural network model. We apply point-wise grouped convolution and depth-wise separable convolutions to confine the model scale and to speed up the inference execution time. The experiment results show that the recognition accuracy of HAR-SAnet outperforms state-of-the-art algorithms and systems.

cs.NI↗

arXiv2021

V2iFi: in-Vehicle Vital Sign Monitoring via Compact RF Sensing

Given the significant amount of time people spend in vehicles, health issues under driving condition have become a major concern. Such issues may vary from fatigue, asthma, stroke, to even heart attack, yet they can be adequately indicated by vital signs and abnormal activities. Therefore, in-vehicle vital sign monitoring can help us predict and hence prevent these issues. Whereas existing sensor-based (including camera) methods could be used to detect these indicators, privacy concern and system complexity both call for a convenient yet effective and robust alternative. This paper aims to develop V2iFi, an intelligent system performing monitoring tasks using a COTS impulse radio mounted on the windshield. V2iFi is capable of reliably detecting driver's vital signs under driving condition and with the presence of passengers, thus allowing for potentially inferring corresponding health issues. Compared with prior work based on Wi-Fi CSI, V2iFi is able to distinguish reflected signals from multiple users, and hence provide finer-grained measurements under more realistic settings. We evaluate V2iFi both in lab environments and during real-life road tests; the results demonstrate that respiratory rate, heart rate, and heart rate variability can all be estimated accurately. Based on these estimation results, we further discuss how machine learning models can be applied on top of V2iFi so as to improve both physiological and psychological wellbeing in driving environments.

eess.SP↗

arXiv2021

SiWa: See into Walls via Deep UWB Radar

Being able to see into walls is crucial for diagnostics of building health; it enables inspections of wall structure without undermining the structural integrity. However, existing sensing devices do not seem to offer a full capability in mapping the in-wall structure while identifying their status (e.g., seepage and corrosion). In this paper, we design and implement SiWa as a low-cost and portable system for wall inspections. Built upon a customized IR-UWB radar, SiWa scans a wall as a user swipes its probe along the wall surface; it then analyzes the reflected signals to synthesize an image and also to identify the material status. Although conventional schemes exist to handle these problems individually, they require troublesome calibrations that largely prevent them from practical adoptions. To this end, we equip SiWa with a deep learning pipeline to parse the rich sensory data. With an ingenious construction and innovative training, the deep learning modules perform structural imaging and the subsequent analysis on material status, without the need for parameter tuning and calibrations. We build SiWa as a prototype and evaluate its performance via extensive experiments and field studies; results confirm that SiWa accurately maps in-wall structures, identifies their materials, and detects possible failures, suggesting a promising solution for diagnosing building health with lower effort and cost.

eess.SP↗

arXiv2017

Cross-Age LFW: A Database for Studying Cross-Age Face Recognition in Unconstrained Environments

Labeled Faces in the Wild (LFW) database has been widely utilized as the benchmark of unconstrained face verification and due to big data driven machine learning methods, the performance on the database approaches nearly 100%. However, we argue that this accuracy may be too optimistic because of some limiting factors. Besides different poses, illuminations, occlusions and expressions, cross-age face is another challenge in face recognition. Different ages of the same person result in large intra-class variations and aging process is unavoidable in real world face verification. However, LFW does not pay much attention on it. Thereby we construct a Cross-Age LFW (CALFW) which deliberately searches and selects 3,000 positive face pairs with age gaps to add aging process intra-class variance. Negative pairs with same gender and race are also selected to reduce the influence of attribute difference between positive/negative pairs and achieve face verification instead of attributes classification. We evaluate several metric learning and deep learning methods on the new database. Compared to the accuracy on LFW, the accuracy drops about 10%-17% on CALFW.

cs.CV↗