Searcharxiv⌕ Search

arXiv subjects

Tianyue Zheng

Publications and source records attributed to Tianyue Zheng.

At least 19 recordsLinked to original sources

FM-Receiver: A Foundation Model Enabled Unified Inner and Outer Neural Receiver Towards AI-Native Wireless Communications

With the development of artificial intelligence (AI) techniques, neural receivers, which apply AI to improve wireless receivers have been developed. However, most existing neural receivers apply deep learning only to the outer receiver while retaining conventional channel decoding for the inner receiver, which prevents joint optimization and makes it difficult to build efficient and unified AI-native receivers. To address this issue, we propose a foundation model (FM)-enabled unified neural receiver, FM-Receiver, that integrates the outer and inner receivers into a single AI-native framework, by leveraging the strong representation capability of FMs. Specifically, we introduce a grouped error correction code Transformer that performs symbol-level channel decoding, enabling seamless integration of the inner and outer receiver. Building on this, we illustrate the proposed FM-Receiver, that directly takes the received signals as input of FM and outputs the recovered transmitted bits. In addition, a three-stage configuration-adaptive pre-training strategy is designed to improve the generalization ability to diverse system configurations and scenarios. Extensive simulations show that the proposed FM-Receiver achieves better performance than baselines across different system configurations. It also demonstrates strong zero-shot generalization to unseen frequency bands and scenarios.

cs.IT↗

MUSE-FM: Multi-task Environment-aware Foundation Model for Wireless Communications

Recent advancements in foundation models (FMs) have attracted increasing attention in the wireless communication domain. Leveraging the powerful multi-task learning capability, FMs hold the promise of unifying multiple tasks of wireless communication with a single framework. Nevertheless, existing wireless FMs face limitations in the uniformity to address multiple tasks with diverse inputs/outputs across different communication scenarios. In this paper, we propose a MUlti-taSk Environment-aware FM (MUSE-FM) with a unified architecture to handle multiple tasks in wireless communications, while effectively incorporating scenario information. Specifically, to achieve task uniformity, we propose a unified prompt-guided data encoder-decoder pair to handle data with heterogeneous formats and distributions across different tasks. Besides, we integrate the environmental context as a multi-modal input, which serves as prior knowledge of environment and channel distributions and facilitates cross-scenario feature extraction. Simulation results illustrate that the proposed MUSE-FM outperforms existing methods for various tasks, and its prompt-guided encoder-decoder pair facilitates few-shot adaptation to new task configurations. Moreover, the incorporation of environment information improves the ability to adapt to different scenarios.

cs.IT↗

Unified Error Correction Code Transformer with Low Complexity

Channel coding is vital for reliable sixth-generation (6G) data transmission, employing diverse error correction codes for various application scenarios. Traditional decoders require dedicated hardware for each code, leading to high hardware costs. Recently, artificial intelligence (AI)-driven approaches, such as the error correction code Transformer (ECCT) and its enhanced version, the foundation error correction code Transformer (FECCT), have been proposed to reduce the hardware cost by leveraging the Transformer to decode multiple codes. However, their excessively high computational complexity of $\mathcal{O}(N^2)$ due to the self-attention mechanism in the Transformer limits scalability, where $N$ represents the sequence length. To reduce computational complexity, we propose a unified Transformer-based decoder that handles multiple linear block codes within a single framework. Specifically, a standardized unit is employed to align code length and code rate across different code types, while a redesigned low-rank unified attention module, with computational complexity of $\mathcal{O}(N)$, is shared across various heads in the Transformer. Additionally, a sparse mask, derived from the parity-check matrix's sparsity, is introduced to enhance the decoder's ability to capture inherent constraints between information and parity-check bits, improving decoding accuracy and further reducing computational complexity by $86\%$. Extensive experimental results demonstrate that the proposed unified Transformer-based decoder outperforms existing methods and provides a high-performance, low-complexity solution for next-generation wireless communication systems.

cs.IT↗

Generalizing WiFi Gesture Recognition via Large-Model-Aware Semantic Distillation and Alignment

WiFi-based gesture recognition has emerged as a promising RF sensing paradigm for enabling non-contact and privacy-preserving human-computer interaction in AIoT environments. However, existing methods often suffer from limited generalization and semantic expressiveness due to the domain-sensitive nature of Channel State Information and the lack of high-level gesture abstraction. To address these challenges, we propose a novel generalization framework, termed Large-Model-Aware Semantic Distillation and Alignment (GLSDA), which leverages the semantic prior of pre-trained large foundation models to enhance gesture representation learning in both in-domain and cross-domain scenarios. Specifically, we first design a dual-path CSI encoding pipeline that captures geometric and dynamic gesture patterns via CSI-Ratio phase sequences and Doppler spectrograms. These representations are then fed into a Multiscale Semantic Encoder, which learns robust temporal embeddings and aligns them with gesture semantics through cross-modal attention mechanisms. To further enhance category discrimination, we introduce a Semantic-Aware Soft Supervision scheme that encodes inter-class correlations and reduces label ambiguity, especially for semantically similar gestures. Finally, we develop a Robust Dual-Distillation strategy to compress the aligned model into a lightweight student network, jointly distilling intermediate features and semantic-informed soft labels from the teacher model. Extensive experiments on the Widar3.0 benchmark show that GLSDA consistently outperforms state-of-the-art methods in both in-domain and cross-domain gesture recognition tasks, while significantly reducing model size and inference latency. Our method offers a scalable and deployable solution for generalized RF-based gesture interfaces in real-world AIoT applications.

cs.CV↗

Empowering Near-Field Communications in Low-Altitude Economy with LLM: Fundamentals, Potentials, Solutions, and Future Directions

The low-altitude economy (LAE) is gaining significant attention from academia and industry. Fortunately, LAE naturally aligns with near-field communications in extremely large-scale MIMO (XL-MIMO) systems. By leveraging near-field beamfocusing, LAE can precisely direct beam energy to unmanned aerial vehicles, while the additional distance dimension boosts overall spectrum efficiency. However, near-field communications in LAE still face several challenges, such as the increase in signal processing complexity and the necessity of distinguishing between far and near-field users. Inspired by the large language models (LLM) with powerful ability to handle complex problems, we apply LLM to solve challenges of near-field communications in LAE. The objective of this article is to provide a comprehensive analysis and discussion on LLM-empowered near-field communications in LAE. Specifically, we first introduce fundamentals of LLM and near-field communications, including the key advantages of LLM and key characteristics of near-field communications. Then, we reveal the opportunities and challenges of near-field communications in LAE. To address these challenges, we present a LLM-based scheme for near-field communications in LAE, and provide a case study which jointly distinguishes far and near-field users and designs multi-user precoding matrix. Finally, we outline and highlight several future research directions and open issues.

eess.SP↗

Advancing Ubiquitous Wireless Connectivity through Channel Twinning

As an emerging trend in channel acquisition (CA), the concept of channel twinning (CT) has been proposed as a powerful enabler of ubiquitous connectivity in next-generation (xG) wireless systems. By fusing multimodal sensor data, CT advocates a high-fidelity and low-overhead CA paradigm, which is promising to provide accurate channel prediction in cross-domain and high-mobility scenarios of ubiquitous xG networks. However, existing literature lacks a universal CT architecture to address the challenges of heterogeneous scenarios, data, and resources in xG networks, which hinders the widespread deployment and applications of CT. This article discusses a new modularized CT architecture to bridge scene recognition, cooperative sensing, and decentralized training, comprising versatile model configuration, multimodal cooperative sensing, and lightweight twin modeling modules. Additionally, this article presents a detailed concept, technical features, and case studies of CT, outlines mainstream trends of realization methods, followed by potential applications of CT-empowered ubiquitous connectivity, and issues requiring future investigations.

eess.SP↗

Large Language Model Enabled Multi-Task Physical Layer Network

The advance of Artificial Intelligence (AI) is continuously reshaping the future 6G wireless communications. Particularly, the development of Large Language Models (LLMs) offers a promising approach to effectively improve the performance and generalization of AI in different physical-layer (PHY) tasks. However, most existing works finetune dedicated LLM networks for a single wireless communication task separately. Thus performing diverse PHY tasks requires extremely high training resources, memory usage, and deployment costs. To solve the problem, we propose a LLM-enabled multi-task PHY network to unify multiple tasks with a single LLM, by exploiting the excellent semantic understanding and generation capabilities of LLMs. Specifically, we first propose a multi-task LLM framework, which finetunes LLM to perform multi-user precoding, signal detection and channel prediction simultaneously. Besides, multi-task instruction module, input encoders, as well as output decoders, are elaborately designed to distinguish different tasks. The proposed design allows different wireless data types to be well aligned with the LLM input format. Moreover, low-rank adaptation (LoRA) is utilized for LLM fine-tuning. To reduce the memory requirement during LLM fine-tuning, a LoRA fine-tuning-aware quantization method is introduced. Extensive numerical simulations are also displayed to verify the effectiveness of the proposed method.

cs.IT↗

RayLoc: Wireless Indoor Localization via Fully Differentiable Ray-tracing

Wireless indoor localization has been a pivotal area of research over the last two decades, becoming a cornerstone for numerous sensing applications. However, conventional wireless localization methods rely on channel state information to perform blind modelling and estimation of a limited set of localization parameters. This oversimplification neglects many sensing scene details, resulting in suboptimal localization accuracy. To address this limitation, this paper presents a novel approach to wireless indoor localization by reformulating it as an inverse problem of wireless ray-tracing, inferring scene parameters that generates the measured CSI. At the core of our solution is a fully differentiable ray-tracing simulator that enables backpropagation to comprehensive parameters of the sensing scene, allowing for precise localization. To establish a robust localization context, RayLoc constructs a high-fidelity sensing scene by refining coarse-grained background model. Furthermore, RayLoc overcomes the challenges of sparse gradient and local minima by convolving the signal generation process with a Gaussian kernel. Extensive experiments showcase that RayLoc outperforms traditional localization baselines and is able to generalize to different sensing environments.

eess.SP↗

MERIT: Multimodal Wearable Vital Sign Waveform Monitoring

Cardiovascular disease (CVD) is the leading cause of death and premature mortality worldwide, with occupational environments significantly influencing CVD risk, underscoring the need for effective cardiac monitoring and early warning systems. Existing methods of monitoring vital signs require subjects to remain stationary, which is impractical for daily monitoring as individuals are often in motion. To address this limitation, we propose MERIT, a multimodality-based wearable system designed for precise ECG waveform monitoring without movement restrictions. Daily activities, involving frequent arm movements, can significantly affect sensor data and complicate the reconstruction of accurate ECG signals. To mitigate motion impact and enhance ECG signal reconstruction, we introduce a deep independent component analysis (Deep-ICA) module and a multimodal fusion module. We conducted experiments with 15 subjects. Our results, compared with commercial wearable devices and existing methods, demonstrate that MERIT accurately reconstructs ECG waveforms during various office activities, offering a reliable solution for fine-grained cardiac monitoring in dynamic environments.

eess.SY↗

t-READi: Transformer-Powered Robust and Efficient Multimodal Inference for Autonomous Driving

Given the wide adoption of multimodal sensors (e.g., camera, lidar, radar) by autonomous vehicles (AVs), deep analytics to fuse their outputs for a robust perception become imperative. However, existing fusion methods often make two assumptions rarely holding in practice: i) similar data distributions for all inputs and ii) constant availability for all sensors. Because, for example, lidars have various resolutions and failures of radars may occur, such variability often results in significant performance degradation in fusion. To this end, we present tREADi, an adaptive inference system that accommodates the variability of multimodal sensory data and thus enables robust and efficient perception. t-READi identifies variation-sensitive yet structure-specific model parameters; it then adapts only these parameters while keeping the rest intact. t-READi also leverages a cross-modality contrastive learning method to compensate for the loss from missing modalities. Both functions are implemented to maintain compatibility with existing multimodal deep fusion methods. The extensive experiments evidently demonstrate that compared with the status quo approaches, t-READi not only improves the average inference accuracy by more than 6% but also reduces the inference latency by almost 15x with the cost of only 5% extra memory overhead in the worst case under realistic data and modal variations.

cs.CV↗

Large Model for Small Data: Foundation Model for Cross-Modal RF Human Activity Recognition

Radio-Frequency (RF)-based Human Activity Recognition (HAR) rises as a promising solution for applications unamenable to techniques requiring computer visions. However, the scarcity of labeled RF data due to their non-interpretable nature poses a significant obstacle. Thanks to the recent breakthrough of foundation models (FMs), extracting deep semantic insights from unlabeled visual data become viable, yet these vision-based FMs fall short when applied to small RF datasets. To bridge this gap, we introduce FM-Fi, an innovative cross-modal framework engineered to translate the knowledge of vision-based FMs for enhancing RF-based HAR systems. FM-Fi involves a novel cross-modal contrastive knowledge distillation mechanism, enabling an RF encoder to inherit the interpretative power of FMs for achieving zero-shot learning. It also employs the intrinsic capabilities of FM and RF to remove extraneous features for better alignment between the two modalities. The framework is further refined through metric-based few-shot learning techniques, aiming to boost the performance for predefined HAR tasks. Comprehensive evaluations evidently indicate that FM-Fi rivals the effectiveness of vision-based methodologies, and the evaluation results provide empirical validation of FM-Fi's generalizability across various environments.

cs.CV↗

ISAC-Fi: Enabling Full-fledged Monostatic Sensing over Wi-Fi Communication

Whereas Wi-Fi communications have been exploited for sensing purpose for over a decade, the bistatic or multistatic nature of Wi-Fi still poses multiple challenges, hampering real-life deployment of integrated sensing and communication (ISAC) within Wi-Fi framework. In this paper, we aim to re-design WiFi so that monostatic sensing (mimicking radar) can be achieved over the multistatic communication infrastructure. Specifically, we propose, design, and implement ISAC-Fi as an ISAC-ready Wi-Fi prototype. We first present a novel self-interference cancellation scheme, in order to extract reflected (radio frequency) signals for sensing purpose in the face of transmissions. We then subtly revise existing Wi-Fi framework so as to seamlessly operate monostatic sensing under Wi-Fi communication standard. Finally, we offer two ISAC-Fi designs: while a USRP-based one emulates a totally re-designed ISAC-Fi device, another plug-andplay design allows for backward compatibility by attaching an extra module to an arbitrary Wi-Fi device. We perform extensive experiments to validate the efficacy of ISAC-Fi and also to demonstrate its superiority over existing Wi-Fi sensing proposals.

cs.NI↗

Near-Field Wideband Beam Training Based on Distance-Dependent Beam Split

Near-field beam training is essential for acquiring channel state information in 6G extremely large-scale multiple input multiple output (XL-MIMO) systems. To achieve low-overhead beam training, existing method has been proposed to leverage the near-field beam split effect, which deploys true-time-delay arrays to simultaneously search multiple angles of the entire angular range in a distance ring with a single pilot. However, the method still requires exhaustive search in the distance domain, which limits its efficiency. To address the problem, we propose a distance-dependent beam-split-based beam training method to further reduce the training overheads. Specifically, we first reveal the new phenomenon of distance-dependent beam split, where by manipulating the configurations of time-delay and phase-shift, beams at different frequencies can simultaneously scan the angular domain in multiple distance rings. Leveraging the phenomenon, we propose a near-field beam training method where both different angles and distances can simultaneously be searched in one time slot. Thus, a few pilots are capable of covering the whole angle-distance space for wideband XL-MIMO. Theoretical analysis and numerical simulations are also displayed to verify the superiority of the proposed method on beamforming gain and training overhead.

cs.IT↗

Coded Beam Training

In extremely large-scale multiple input multiple output (XL-MIMO) systems for future sixth-generation (6G) communications, codebook-based beam training stands out as a promising technology to acquire channel state information (CSI). Despite their effectiveness, when the pilot overhead is limited, existing beam training methods suffer from significant achievable rate degradation for remote users with low signal-to-noise ratio (SNR). To tackle this challenge, leveraging the error-correcting capability of channel codes, we introduce channel coding theory into hierarchical beam training to extend the coverage area. Specifically, we establish the duality between hierarchical beam training and channel coding, and the proposed coded beam training scheme serves as a general framework. Then, we present two specific implementations exemplified by coded beam training methods based on Hamming codes and convolutional codes, during which the beam encoding and decoding processes are refined respectively to better accommodate the beam training problem. Simulation results have demonstrated that the proposed coded beam training method can enable reliable beam training performance for remote users with low SNR while keeping training overhead low.

cs.IT↗

Adv-4-Adv: Thwarting Changing Adversarial Perturbations via Adversarial Domain Adaptation

Whereas adversarial training can be useful against specific adversarial perturbations, they have also proven ineffective in generalizing towards attacks deviating from those used for training. However, we observe that this ineffectiveness is intrinsically connected to domain adaptability, another crucial issue in deep learning for which adversarial domain adaptation appears to be a promising solution. Consequently, we proposed Adv-4-Adv as a novel adversarial training method that aims to retain robustness against unseen adversarial perturbations. Essentially, Adv-4-Adv treats attacks incurring different perturbations as distinct domains, and by leveraging the power of adversarial domain adaptation, it aims to remove the domain/attack-specific features. This forces a trained model to learn a robust domain-invariant representation, which in turn enhances its generalization ability. Extensive evaluations on Fashion-MNIST, SVHN, CIFAR-10, and CIFAR-100 demonstrate that a model trained by Adv-4-Adv based on samples crafted by simple attacks (e.g., FGSM) can be generalized to more advanced attacks (e.g., PGD), and the performance exceeds state-of-the-art proposals on these datasets.

cs.CV↗

HoloFed: Environment-Adaptive Positioning via Multi-band Reconfigurable Holographic Surfaces and Federated Learning

Positioning is an essential service for various applications and is expected to be integrated with existing communication infrastructures in 5G and 6G. Though current Wi-Fi and cellular base stations (BSs) can be used to support this integration, the resulting precision is unsatisfactory due to the lack of precise control of the wireless signals. Recently, BSs adopting reconfigurable holographic surfaces (RHSs) have been advocated for positioning as RHSs' large number of antenna elements enable generation of arbitrary and highly-focused signal beam patterns. However, existing designs face two major challenges: i) RHSs only have limited operating bandwidth, and ii) the positioning methods cannot adapt to the diverse environments encountered in practice. To overcome these challenges, we present HoloFed, a system providing high-precision environment-adaptive user positioning services by exploiting multi-band(MB)-RHS and federated learning (FL). For improving the positioning performance, a lower bound on the error variance is obtained and utilized for guiding MB-RHS's digital and analog beamforming design. For better adaptability while preserving privacy, an FL framework is proposed for users to collaboratively train a position estimator, where we exploit the transfer learning technique to handle the lack of position labels of the users. Moreover, a scheduling algorithm for the BS to select which users train the position estimator is designed, jointly considering the convergence and efficiency of FL. Our simulation results confirm that HoloFed achieves a 57% lower positioning error variance compared to a beam-scanning baseline and can effectively adapt to diverse environments.

eess.SP↗

Password-Stealing without Hacking: Wi-Fi Enabled Practical Keystroke Eavesdropping

The contact-free sensing nature of Wi-Fi has been leveraged to achieve privacy breaches, yet existing attacks relying on Wi-Fi CSI (channel state information) demand hacking Wi-Fi hardware to obtain desired CSIs. Since such hacking has proven prohibitively hard due to compact hardware, its feasibility in keeping up with fast-developing Wi-Fi technology becomes very questionable. To this end, we propose WiKI-Eve to eavesdrop keystrokes on smartphones without the need for hacking. WiKI-Eve exploits a new feature, BFI (beamforming feedback information), offered by latest Wi-Fi hardware: since BFI is transmitted from a smartphone to an AP in clear-text, it can be overheard (hence eavesdropped) by any other Wi-Fi devices switching to monitor mode. As existing keystroke inference methods offer very limited generalizability, WiKI-Eve further innovates in an adversarial learning scheme to enable its inference generalizable towards unseen scenarios. We implement WiKI-Eve and conduct extensive evaluation on it; the results demonstrate that WiKI-Eve achieves 88.9% inference accuracy for individual keystrokes and up to 65.8% top-10 accuracy for stealing passwords of mobile applications (e.g., WeChat).

cs.CR↗

OCHID-Fi: Occlusion-Robust Hand Pose Estimation in 3D via RF-Vision

Hand Pose Estimation (HPE) is crucial to many applications, but conventional cameras-based CM-HPE methods are completely subject to Line-of-Sight (LoS), as cameras cannot capture occluded objects. In this paper, we propose to exploit Radio-Frequency-Vision (RF-vision) capable of bypassing obstacles for achieving occluded HPE, and we introduce OCHID-Fi as the first RF-HPE method with 3D pose estimation capability. OCHID-Fi employs wideband RF sensors widely available on smart devices (e.g., iPhones) to probe 3D human hand pose and extract their skeletons behind obstacles. To overcome the challenge in labeling RF imaging given its human incomprehensible nature, OCHID-Fi employs a cross-modality and cross-domain training process. It uses a pre-trained CM-HPE network and a synchronized CM/RF dataset, to guide the training of its complex-valued RF-HPE network under LoS conditions. It further transfers knowledge learned from labeled LoS domain to unlabeled occluded domain via adversarial learning, enabling OCHID-Fi to generalize to unseen occluded scenarios. Experimental results demonstrate the superiority of OCHID-Fi: it achieves comparable accuracy to CM-HPE under normal conditions while maintaining such accuracy even in occluded scenarios, with empirical evidence for its generalizability to new domains.

cs.CV↗