Searcharxiv⌕ Search

arXiv subjects

Tim Weyrich

Publications and source records attributed to Tim Weyrich.

At least 19 recordsLinked to original sources

DIRT: Depth-completed Image-based Rendering using Two-band Blending for Live Novel-view Synthesis

State-of-the-art novel-view synthesis (NVS) methods commonly require per-scene optimization before rendering, limiting their applicability in live settings. Live or ad-hoc NVS, however, demands low-latency rendering during capture and strong generalization to new scenes. Some previous work tried to address this task by adapting training- and optimization-based methods, trading quality for low latency. We introduce a live NVS approach following traditional image-based rendering that operates on a posed set of depth sensor observations and images. Our method leverages explicit, sparse point-based geometry obtained from active sensors, resulting in a sparsely filled depth buffer that is completed in the (novel) target view's screen-space. Using this proxy, a posed set of images is projected into the target frame before fusing the resulting observations through a frequency-aware two-band blending strategy. The pipeline is entirely non-neural and optimization-free, requiring no training data or scene-specific optimization. As a result, our approach reduces the delay between capture and novel-view rendering and does not rely on favorable network generalization. We validate the method's applicability to heterogeneous sensor setups - including handheld RGB-D cameras, automotive LiDAR, and thermal cameras - as well as challenging scenarios, such as low light captures. Our experiments demonstrate that the approach outperforms prior methods in live reconstruction scenarios, while maintaining competitive performance in conventional NVS benchmarks.

cs.CV↗

MM-2FSK: Multimodal Frequency Shift Keying for Ultra-Efficient and Robust High-Resolution MIMO Radar Imaging

Accurate reconstruction of dynamic targets demands three-dimensional imaging at high temporal resolution. Radar is a particularly attractive sensing modality for this purpose due to its fast capture capabilities and robustness under varying lighting and weather conditions. Consequently, it has been successfully employed in a variety of dynamic applications, such as automotive and robotic perception. Nevertheless, dynamic sensing remains comparatively unexplored in operating regimes requiring near-field, high-fidelity surface reconstruction, as commonly targeted by large-aperture mmWave MIMO radars. Here, achieving high frame rates is challenged by the substantial computational cost of reconstruction, imposing stringent constraints on bandwidth, compute resources, and ultimately sensor capture rate. To enable fast captures at reduced computation cost, prior work explored few-tone imaging, reducing the number of transmitted frequencies at the expense of increased range-phase ambiguity; however, this requires coarse knowledge of the target position and is primarily designed to reconstruct flat surface geometries. We present MM-2FSK, which extends two-tone stepped frequency imaging with an external modality-agnostic per-point depth prior for precise near-field 3D imaging of geometrically complex surfaces. To address range-phase ambiguities, the prior is processed to mitigate inter-modality data mismatch, transformed into a radar-compatible representation, and integrated into signal processing as a phase constraint. In experiments with a mmWave FSCW MIMO radar and with representative priors obtained from a co-located optical sensor, we demonstrate superior depth accuracy of our method over comparable near-field few-tone radar imaging approaches in static and dynamic scenes, competitive with time- and resource-intensive measurements of many-tone backprojection.

eess.SP↗

MAROON: A Dataset for the Joint Characterization of Near-Field High-Resolution Radio-Frequency and Optical Depth Imaging Techniques

Utilizing the complementary strengths of wavelength-specific range or depth sensors is crucial for robust computer-assisted tasks such as autonomous driving. Despite this, there is still little research done at the intersection of optical depth sensors and radars operating close range, where the target is decimeters away from the sensors. Together with a growing interest in high-resolution imaging radars operating in the near field, the question arises how these sensors behave in comparison to their traditional optical counterparts. In this work, we take on the unique challenge of jointly characterizing depth imagers from both, the optical and radio-frequency domain using a multimodal spatial calibration. We collect data from four depth imagers, with three optical sensors of varying operation principle and an imaging radar. We provide a comprehensive evaluation of their depth measurements with respect to distinct object materials, geometries, and object-to-sensor distances. Specifically, we reveal scattering effects of partially transmissive materials and investigate the response of radio-frequency signals. All object measurements are made public in form of a multimodal dataset, called MAROON, which can be accessed at: https://vwirth.github.io/maroon

eess.IV↗

Feature-Guided Diffusion for Non-Differentiable Inverse Rendering

Inverse rendering is traditionally solved via differentiable renderers and gradient descent, which requires substantial problem-specific engineering and is prone to getting stuck in local minima due to ambiguities. Derivative-free approaches alleviate engineering requirements, but often heavily depend on a good problem initialization. In this work, we propose Feature-Informed Diffusion Evolution (FIDE), a fully black-box framework that requires no gradients or specific initialization: the renderer is treated as an opaque function whose only requirement is to produce images. Our key insight is feature guiding: rather than reducing each candidate rendering to a scalar loss value, we use a Vision Transformer (ViT) to extract dense visual features from it. We subsequently use these features to train a diffusion-based candidate proposal model, allowing the network to use visual cues to predict parameters that would match the target image. The candidate solutions proposed by this diffusion model are then refined in a closed loop with a CMA evolution strategy, continuously narrowing the proposal region as optimization progresses. We validate across diverse inverse problems from path tracing, vector splines, Voronoi shaders, and robotics, and demonstrate that feature-guiding substantially improves convergence over scalar-loss baselines and reliably escapes local minima where gradient-based methods stall.

cs.GR↗

Example-Based Feature Painting on Textures

In this work, we propose a system that covers the complete workflow for achieving controlled authoring and editing of textures that present distinctive local characteristics. These include various effects that change the surface appearance of materials, such as stains, tears, holes, abrasions, discoloration, and more. Such alterations are ubiquitous in nature, and including them in the synthesis process is crucial for generating realistic textures. We introduce a novel approach for creating textures with such blemishes, adopting a learning-based approach that leverages unlabeled examples. Our approach does not require manual annotations by the user; instead, it detects the appearance-altering features through unsupervised anomaly detection. The various textural features are then automatically clustered into semantically coherent groups, which are used to guide the conditional generation of images. Our pipeline as a whole goes from a small image collection to a versatile generative model that enables the user to interactively create and paint features on textures of arbitrary size. Notably, the algorithms we introduce for diffusion-based editing and infinite stationary texture generation are generic and should prove useful in other contexts as well. Project page: https://reality.tf.fau.de/pub/ardelean2025examplebased.html

cs.CV↗

3DPR: Single Image 3D Portrait Relight using Generative Priors

Rendering novel, relit views of a human head, given a monocular portrait image as input, is an inherently underconstrained problem. The traditional graphics solution is to explicitly decompose the input image into geometry, material and lighting via differentiable rendering; but this is constrained by the multiple assumptions and approximations of the underlying models and parameterizations of these scene components. We propose 3DPR, an image-based relighting model that leverages generative priors learnt from multi-view One-Light-at-A-Time (OLAT) images captured in a light stage. We introduce a new diverse and large-scale multi-view 4K OLAT dataset of 139 subjects to learn a high-quality prior over the distribution of high-frequency face reflectance. We leverage the latent space of a pre-trained generative head model that provides a rich prior over face geometry learnt from in-the-wild image datasets. The input portrait is first embedded in the latent manifold of such a model through an encoder-based inversion process. Then a novel triplane-based reflectance network trained on our lightstage data is used to synthesize high-fidelity OLAT images to enable image-based relighting. Our reflectance network operates in the latent space of the generative head model, crucially enabling a relatively small number of lightstage images to train the reflectance model. Combining the generated OLATs according to a given HDRI environment maps yields physically accurate environmental relighting results. Through quantitative and qualitative evaluations, we demonstrate that 3DPR outperforms previous methods, particularly in preserving identity and in capturing lighting effects such as specularities, self-shadows, and subsurface scattering. Project Page: https://vcai.mpi-inf.mpg.de/projects/3dpr/

cs.CV↗

Quantized FCA: Efficient Zero-Shot Texture Anomaly Detection

Zero-shot anomaly localization is a rising field in computer vision research, with important progress in recent years. This work focuses on the problem of detecting and localizing anomalies in textures, where anomalies can be defined as the regions that deviate from the overall statistics, violating the stationarity assumption. The main limitation of existing methods is their high running time, making them impractical for deployment in real-world scenarios, such as assembly line monitoring. We propose a real-time method, named QFCA, which implements a quantized version of the feature correspondence analysis (FCA) algorithm. By carefully adapting the patch statistics comparison to work on histograms of quantized values, we obtain a 10x speedup with little to no loss in accuracy. Moreover, we introduce a feature preprocessing step based on principal component analysis, which enhances the contrast between normal and anomalous features, improving the detection precision on complex textures. Our method is thoroughly evaluated against prior art, comparing favorably with existing methods. Project page: https://reality.tf.fau.de/pub/ardelean2025quantized.html

cs.CV↗

FruitNeRF++: A Generalized Multi-Fruit Counting Method Utilizing Contrastive Learning and Neural Radiance Fields

We introduce FruitNeRF++, a novel fruit-counting approach that combines contrastive learning with neural radiance fields to count fruits from unstructured input photographs of orchards. Our work is based on FruitNeRF, which employs a neural semantic field combined with a fruit-specific clustering approach. The requirement for adaptation for each fruit type limits the applicability of the method, and makes it difficult to use in practice. To lift this limitation, we design a shape-agnostic multi-fruit counting framework, that complements the RGB and semantic data with instance masks predicted by a vision foundation model. The masks are used to encode the identity of each fruit as instance embeddings into a neural instance field. By volumetrically sampling the neural fields, we extract a point cloud embedded with the instance features, which can be clustered in a fruit-agnostic manner to obtain the fruit count. We evaluate our approach using a synthetic dataset containing apples, plums, lemons, pears, peaches, and mangoes, as well as a real-world benchmark apple dataset. Our results demonstrate that FruitNeRF++ is easier to control and compares favorably to other state-of-the-art methods.

cs.CV↗

Efficient Perspective-Correct 3D Gaussian Splatting Using Hybrid Transparency

3D Gaussian Splats (3DGS) have proven a versatile rendering primitive, both for inverse rendering as well as real-time exploration of scenes. In these applications, coherence across camera frames and multiple views is crucial, be it for robust convergence of a scene reconstruction or for artifact-free fly-throughs. Recent work started mitigating artifacts that break multi-view coherence, including popping artifacts due to inconsistent transparency sorting and perspective-correct outlines of (2D) splats. At the same time, real-time requirements forced such implementations to accept compromises in how transparency of large assemblies of 3D Gaussians is resolved, in turn breaking coherence in other ways. In our work, we aim at achieving maximum coherence, by rendering fully perspective-correct 3D Gaussians while using a high-quality approximation of accurate blending, hybrid transparency, on a per-pixel level, in order to retain real-time frame rates. Our fast and perspectively accurate approach for evaluation of 3D Gaussians does not require matrix inversions, thereby ensuring numerical stability and eliminating the need for special handling of degenerate splats, and the hybrid transparency formulation for blending maintains similar quality as fully resolved per-pixel transparencies at a fraction of the rendering costs. We further show that each of these two components can be independently integrated into Gaussian splatting systems. In combination, they achieve up to 2$\times$ higher frame rates, 2$\times$ faster optimization, and equal or better image quality with fewer rendering artifacts compared to traditional 3DGS on common benchmarks.

cs.GR↗

Automatic Spatial Calibration of Near-Field MIMO Radar With Respect to Optical Depth Sensors

Despite an emerging interest in MIMO radar, the utilization of its complementary strengths in combination with optical depth sensors has so far been limited to far-field applications, due to the challenges that arise from mutual sensor calibration in the near field. In fact, most related approaches in the autonomous industry propose target-based calibration methods using corner reflectors that have proven to be unsuitable for the near field. In contrast, we propose a novel, joint calibration approach for optical RGB-D sensors and MIMO radars that is designed to operate in the radar's near-field range, within decimeters from the sensors. Our pipeline consists of a bespoke calibration target, allowing for automatic target detection and localization, followed by the spatial calibration of the two sensor coordinate systems through target registration. We validate our approach using two different depth sensing technologies from the optical domain. The experiments show the efficiency and accuracy of our calibration for various target displacements, as well as its robustness of our localization in terms of signal ambiguities.

cs.RO↗

Lite2Relight: 3D-aware Single Image Portrait Relighting

Achieving photorealistic 3D view synthesis and relighting of human portraits is pivotal for advancing AR/VR applications. Existing methodologies in portrait relighting demonstrate substantial limitations in terms of generalization and 3D consistency, coupled with inaccuracies in physically realistic lighting and identity preservation. Furthermore, personalization from a single view is difficult to achieve and often requires multiview images during the testing phase or involves slow optimization processes. This paper introduces Lite2Relight, a novel technique that can predict 3D consistent head poses of portraits while performing physically plausible light editing at interactive speed. Our method uniquely extends the generative capabilities and efficient volumetric representation of EG3D, leveraging a lightstage dataset to implicitly disentangle face reflectance and perform relighting under target HDRI environment maps. By utilizing a pre-trained geometry-aware encoder and a feature alignment module, we map input images into a relightable 3D space, enhancing them with a strong face geometry and reflectance prior. Through extensive quantitative and qualitative evaluations, we show that our method outperforms the state-of-the-art methods in terms of efficacy, photorealism, and practical application. This includes producing 3D-consistent results of the full head, including hair, eyes, and expressions. Lite2Relight paves the way for large-scale adoption of photorealistic portrait editing in various domains, offering a robust, interactive solution to a previously constrained problem. Project page: https://vcai.mpi-inf.mpg.de/projects/Lite2Relight/

cs.CV↗

Blind Localization and Clustering of Anomalies in Textures

Anomaly detection and localization in images is a growing field in computer vision. In this area, a seemingly understudied problem is anomaly clustering, i.e., identifying and grouping different types of anomalies in a fully unsupervised manner. In this work, we propose a novel method for clustering anomalies in largely stationary images (textures) in a blind setting. That is, the input consists of normal and anomalous images without distinction and without labels. What contributes to the difficulty of the task is that anomalous regions are often small and may present only subtle changes in appearance, which can be easily overshadowed by the genuine variance in the texture. Moreover, each anomaly type may have a complex appearance distribution. We introduce a novel scheme for solving this task using a combination of blind anomaly localization and contrastive learning. By identifying the anomalous regions with high fidelity, we can restrict our focus to those regions of interest; then, contrastive learning is employed to increase the separability of different anomaly types and reduce the intra-class variation. Our experiments show that the proposed solution yields significantly better results compared to prior work, setting a new state of the art. Project page: https://reality.tf.fau.de/pub/ardelean2024blind.html.

cs.CV↗

High-Fidelity Zero-Shot Texture Anomaly Localization Using Feature Correspondence Analysis

We propose a novel method for Zero-Shot Anomaly Localization on textures. The task refers to identifying abnormal regions in an otherwise homogeneous image. To obtain a high-fidelity localization, we leverage a bijective mapping derived from the 1-dimensional Wasserstein Distance. As opposed to using holistic distances between distributions, the proposed approach allows pinpointing the non-conformity of a pixel in a local context with increased precision. By aggregating the contribution of the pixel to the errors of all nearby patches we obtain a reliable anomaly score estimate. We validate our solution on several datasets and obtain more than a 40% reduction in error over the previous state of the art on the MVTec AD dataset in a zero-shot setting. Also see https://reality.tf.fau.de/pub/ardelean2024highfidelity.html.

cs.CV↗

Achieving Efficient and Realistic Full-Radar Simulations and Automatic Data Annotation by exploiting Ray Meta Data of a Radar Ray Tracing Simulator

In this work a novel radar simulation concept is introduced that allows to simulate realistic radar data for Range, Doppler, and for arbitrary antenna positions in an efficient way. Further, it makes it possible to automatically annotate the simulated radar signal by allowing to decompose it into different parts. This approach allows not only almost perfect annotations possible, but also allows the annotation of exotic effects, such as multi-path effects or to label signal parts originating from different parts of an object. This is possible by adapting the computation process of a Monte Carlo shooting and bouncing rays (SBR) simulator. By considering the hits of each simulated ray, various meta data can be stored such as hit position, mesh pointer, object IDs, and many more. This collected meta data can then be utilized to predict the change of path lengths introduced by object motion to obtain Doppler information or to apply specific ray filter rules in order obtain radar signals that only fulfil specific conditions, such as multiple bounces or containing specific object IDs. Using this approach, perfect and otherwise almost impossible annotations schemes can be realized.

eess.SP↗

Metameric Varifocal Holography

Computer-Generated Holography (CGH) offers the potential for genuine, high-quality three-dimensional visuals. However, fulfilling this potential remains a practical challenge due to computational complexity and visual quality issues. We propose a new CGH method that exploits gaze-contingency and perceptual graphics to accelerate the development of practical holographic display systems. Firstly, our method infers the user's focal depth and generates images only at their focus plane without using any moving parts. Second, the images displayed are metamers; in the user's peripheral vision, they need only be statistically correct and blend with the fovea seamlessly. Unlike previous methods, our method prioritises and improves foveal visual quality without causing perceptually visible distortions at the periphery. To enable our method, we introduce a novel metameric loss function that robustly compares the statistics of two given images for a known gaze location. In parallel, we implement a model representing the relation between holograms and their image reconstructions. We couple our differentiable loss function and model to metameric varifocal holograms using a stochastic gradient descent solver. We evaluate our method with an actual proof-of-concept holographic display, and we show that our CGH method leads to practical and perceptually three-dimensional image reconstructions.

cs.GR↗

Neural BRDF Representation and Importance Sampling

Controlled capture of real-world material appearance yields tabulated sets of highly realistic reflectance data. In practice, however, its high memory footprint requires compressing into a representation that can be used efficiently in rendering while remaining faithful to the original. Previous works in appearance encoding often prioritised one of these requirements at the expense of the other, by either applying high-fidelity array compression strategies not suited for efficient queries during rendering, or by fitting a compact analytic model that lacks expressiveness. We present a compact neural network-based representation of BRDF data that combines high-accuracy reconstruction with efficient practical rendering via built-in interpolation of reflectance. We encode BRDFs as lightweight networks, and propose a training scheme with adaptive angular sampling, critical for the accurate reconstruction of specular highlights. Additionally, we propose a novel approach to make our representation amenable to importance sampling: rather than inverting the trained networks, we learn to encode them in a more compact embedding that can be mapped to parameters of an analytic BRDF for which importance sampling is known. We evaluate encoding results on isotropic and anisotropic BRDFs from multiple real-world datasets, and importance sampling performance for isotropic BRDFs mapped to two different analytic models.

cs.GR↗

PhotoApp: Photorealistic Appearance Editing of Head Portraits

Photorealistic editing of portraits is a challenging task as humans are very sensitive to inconsistencies in faces. We present an approach for high-quality intuitive editing of the camera viewpoint and scene illumination in a portrait image. This requires our method to capture and control the full reflectance field of the person in the image. Most editing approaches rely on supervised learning using training data captured with setups such as light and camera stages. Such datasets are expensive to acquire, not readily available and do not capture all the rich variations of in-the-wild portrait images. In addition, most supervised approaches only focus on relighting, and do not allow camera viewpoint editing. Thus, they only capture and control a subset of the reflectance field. Recently, portrait editing has been demonstrated by operating in the generative model space of StyleGAN. While such approaches do not require direct supervision, there is a significant loss of quality when compared to the supervised approaches. In this paper, we present a method which learns from limited supervised training data. The training images only include people in a fixed neutral expression with eyes closed, without much hair or background variations. Each person is captured under 150 one-light-at-a-time conditions and under 8 camera poses. Instead of training directly in the image space, we design a supervised problem which learns transformations in the latent space of StyleGAN. This combines the best of supervised learning and generative adversarial modeling. We show that the StyleGAN prior allows for generalisation to different expressions, hairstyles and backgrounds. This produces high-quality photorealistic results for in-the-wild images and significantly outperforms existing methods. Our approach can edit the illumination and pose simultaneously, and runs at interactive rates.

cs.CV↗

Monocular Reconstruction of Neural Face Reflectance Fields

The reflectance field of a face describes the reflectance properties responsible for complex lighting effects including diffuse, specular, inter-reflection and self shadowing. Most existing methods for estimating the face reflectance from a monocular image assume faces to be diffuse with very few approaches adding a specular component. This still leaves out important perceptual aspects of reflectance as higher-order global illumination effects and self-shadowing are not modeled. We present a new neural representation for face reflectance where we can estimate all components of the reflectance responsible for the final appearance from a single monocular image. Instead of modeling each component of the reflectance separately using parametric models, our neural representation allows us to generate a basis set of faces in a geometric deformation-invariant space, parameterized by the input light direction, viewpoint and face geometry. We learn to reconstruct this reflectance field of a face just from a monocular image, which can be used to render the face from any viewpoint in any light condition. Our method is trained on a light-stage training dataset, which captures 300 people illuminated with 150 light conditions from 8 viewpoints. We show that our method outperforms existing monocular reflectance reconstruction methods, in terms of photorealism due to better capturing of physical premitives, such as sub-surface scattering, specularities, self-shadows and other higher-order effects.

cs.CV↗