SearcharxivSearch

arXiv subjects

Ting Cui

Publications and source records attributed to Ting Cui.

17 recordsLinked to original sources

$3d_{z^2}$ orbital delocalization and magnetic collapse in superconducting (La,Pr)$_3$Ni$_2$O$_{7-\delta}$ films

The recent discovery of Ruddlesden--Popper (RP) nickelate thin-film superconductors has opened a new frontier in unconventional superconductivity. Its realization requires both compressive epitaxial strain and highly oxidative growth conditions, yet the microscopic pathway from the parent phase to the superconducting phase remains elusive. Here, X-ray absorption spectra and resonant inelastic X-ray scattering are employed to track this evolution by independently tuning strain and oxygen content in (La,Pr)$_3$Ni$_2$O$_{7-\delta}$ thin films. We uncover a remarkable two-step narrative. First, signatures of delocalization emerge in the same way upon two independent tunings: Spectral weight transfers from a ''Upper Hubbard''-like peak to the hole-like peak associated with O $2p_z$ state, and in parallel, the initially localized Ni $3d_{z^2}$ orbital becomes more itinerant followed by the broadening and weakening of $dd$ orbital excitations. Second, as itinerancy increases, long-range spin-density-wave (SDW) order is suppressed in both intensity and correlation length, indicating direct competition with superconductivity. Yet, short-range magnons persist: they become damped but their bandwidth stays unchanged. Our results paint a coherent picture that both strain and oxygenation drive the RP bilayer nickelates towards the superconducting instability, where the O $2p_z$ and Ni $3d_{z^2}$ orbitals become delocalized. Concomitantly, the long-range magnetic order loses coherence and gets suppressed. These findings establish an orbital-selective route to RP nickelate superconductivity, in which the delocalization of the $2p_z$ and $3d_{z^2}$ orbitals and the robust short-range magnons upon the melting of SDW order are prerequisites, providing strong constraints for theory and the roadmap for designing nickelate superconductors.

cond-mat.supr-con

Observation of square-like moire lattice and quasicrystalline order in twisted rock-salt nitrides

Twistronics, which exploits moire modulation of lattice and electronic structures in twisted bilayers, has emerged as a powerful approach to engineer novel quantum states. Recent efforts have expanded beyond two dimensional van der Waals (vdWs) crystals to more complex, strongly correlated materials, where interfacial moire effects can dominate physical properties. Here we demonstrate a generalizable route to fabricate twisted bilayers of transition metal nitrides with vdWs like interfaces, using freestanding CrN membranes as a model system. Twisted bilayer CrN (tCrN) is realized by employing cubic alkaline earth metal monoxides as sacrificial layers, enabling the assembly of clean, controllable interfaces. Electron ptychography reveals well defined, periodic square moire superlattices in tCrN. For a twist angle of 16.3 degree, we identify a nearly commensurate moire lattice with coincident Cr columns, whereas at 45 degree we uncover localized octagonal quasicrystalline order with clear self-similarity. These results establish a practical platform for twisted TMNs and open avenues to explore moire-induced atomic configurations and emergent correlated phenomena in nitride based heterostructures.

cond-mat.mtrl-sci

Unusual strain relaxation and Dirac semimetallic behavior in epitaxial antiperovskite nitrides

Antiperovskite nitrides (X3AN) are the structural analogues to perovskite oxides, while their epitaxial growth and electronic properties remain largely unexplored. We report the successful synthesis of Ni3InN thin films on substrates with different lattice constants. First-principles phonon calculations confirm the dynamical stability of cubic phase Ni3InN, providing the basis for epitaxial synthesis. High-resolution scanning transmission electron microscopy reveals coherent (001)-oriented interfaces when Ni3InN is grown on LaAlO3 and SrTiO3, while an unexpected (011)-orientation forms on DyScO3, aligning with surface-energy predictions. Transport measurements highlight a strain-controlled Fermi-liquid behavior, correlated with variations in the Ni-3d bandwidth and hybridization. Band structure calculations reveal a dual character near the Fermi level: a high-mobility Dirac-like band and a Ni-3d manifold that drives strange-metal transport with a reduced slope compared to oxide perovskites. The formal Ni valence (+2/3) places Ni3InN in an overdoped correlated-metal regime, distinguishing from most perovskite oxides. This positions antiperovskite nitrides as a promising platform for investigating overdoped Fermi liquids and strange-metal behavior.

cond-mat.mtrl-sci

When Large Language Models Meet UAV Projects: An Empirical Study from Developers' Perspective

In recent years, unmanned aerial vehicles (UAVs) have become increasingly popular in our daily lives and have attracted significant research interest in software engineering. At the same time, large language models (LLMs) have made notable advancements in language understanding, reasoning, and generation, making LLM applications in UAVs a promising research direction. However, existing studies have largely remained in preliminary exploration with a limited understanding of real-world practice, which causes an academia-industry gap and hinders the application of LLMs in UAVs. To address this, we conducted the first empirical study to investigate how LLMs support UAVs. To characterize common tasks and application scenarios of real-world UAV-LLM practices, we conducted a large-scale empirical study involving 997 research papers and 1,509 GitHub projects. The results classified nine common tasks (e.g., Natural Language Command Parsing) in four UAV workflows (e.g., Information Input) undertaken by LLMs in real-world UAV projects and revealed a large difference in the task distribution of research efforts and industry practices. To gain deeper insight into these differences and understand developers' perspectives on the application of LLMs in UAVs, we conducted a survey of practitioners, receiving 52 valid responses from 15 countries. The results revealed that while 40.4% of developers have attempted to apply LLMs to UAV tasks, 59.6% still face challenges integrating their UAV projects with advanced LLM capabilities. Their feedback attributes these challenges to five factors, including technological maturity, performance, safety, cost, and others, and provides practical implications for researchers and developers in conducting UAV-LLM practices.

cs.SE

Advancing Antiferromagnetic Nitrides via Metal Alloy Nitridation

Nitride materials, valued for their structural stability and exceptional physical properties, have garnered significant interest in both fundamental research and technological applications. The fabrication of high-quality nitride thin films is essential for advancing their use in microelectronics and spintronics. Yet, achieving single-crystal nitride thin films with excellent structural integrity remains a challenge. Here, we introduce a straightforward yet innovative metallic alloy nitridation technique for the synthesis of stable single-crystal nitride thin films. By subjecting metal alloy thin films to a controlled nitridation process, nitrogen atoms integrate into the lattice, driving structural transformations while preserving high epitaxial quality. Combining nanoscale magnetic imaging with a diamond nitrogen-vacancy (NV) probe, X-ray magnetic linear dichroism, and comprehensive transport measurements, we confirm that the nitridated films exhibit a robust antiferromagnetic character with a zero net magnetic moment. This work not only provides a refined and reproducible strategy for the fabrication of nitride thin films but also lays a robust foundation for exploring their burgeoning device applications.

cond-mat.mtrl-sci

Designing Optimal Distorted-Octahedra Superlattices for Strong Topological Hall Effect

Topologically protected spin states hold great promise for applications in next generation of memory circuits and spintronic devices. These intriguing textures typically emerge in bulk materials or heterostructures with broken inversion symmetry, accompanied by an enhanced Dzyaloshinskii-Moriya interaction (DMI). In this study, we successfully induced the topological Hall effect (THE) in atomically designed (DyScO3)n/(SrRuO3)n (DnSn) superlattices over a significant range of temperatures (10~120K) and thicknesses (16~40nm). Using magnetic force microscopy (MFM), we observed the formation and stability of magnetic domains, such as topological skyrmions. By precisely controlling the interlayer thickness (n) and biaxial strain, we elucidated the mechanisms underlying the modulation and induction of magnetic topological states. Supporting evidence was provided by scanning transmission electron microscopy (STEM) and X-ray absorption spectroscopy (XAS), thereby lending further credence to our conclusions. These heterostructures offer a universal method for exploring topological phenomena driven by distorted octahedra, while enhancing the integrability and addressability of topologically protected functional devices.

cond-mat.mtrl-sci

Charge transfer induced insulating state at antiperovskite/perovskite heterointerfaces

Heterointerfaces have been pivotal in unveiling extraordinary interfacial properties and enabling multifunctional material platforms. Despite extensive research on all-oxide interfaces, heterointerfaces between different material classes, such as oxides and nitrides, remain underexplored. Here we present the fabrication of a high-quality Dirac metal antiperovskite Ni3InN, characterized by an extremely low temperature coefficient of resistivity, approximately 1.8*10^-8 {\Omega}*cm/K, over a broad temperature range. Atomically sharp heterointerfaces between Ni3InN and SrVO3 were constructed, revealing intriguing interfacial phenomena. Leveraging layer-resolved scanning transmission electron microscopy and electron energy loss spectroscopy, we identified pronounced charge transfer across the well-ordered interface. Remarkably, this interfacial electron transfer from Ni3InN to SrVO3 induces an insulating interfacial layer and an emergent magnetic moment within the Ni3InN layer, consistent with first-principles calculations. These findings pave the way for novel electronic and spintronic applications by enabling tunable interfacial properties in nitride/oxide systems.

cond-mat.mtrl-sci

Confined Magnetization at the Sublattice-Matched Ruthenium Oxide Heterointerface

Creating a heterostructure by combining two magnetically and structurally distinct ruthenium oxides is a crucial approach for investigating their emergent magnetic states and interactions. Previously, research has predominantly concentrated on the intrinsic properties of the ferromagnet SrRuO3 and recently discovered altermagnet RuO2 solely. Here, we engineered an ultrasharp sublattice-matched heterointerface using pseudo-cubic SrRuO3 and rutile RuO2, conducting an in-depth analysis of their spin interactions. Structurally, to accommodate the lattice symmetry mismatch, the inverted RuO2 layer undergoes an in-plane rotation of 18 degrees during epitaxial growth on SrRuO3 layer, resulting in an interesting and rotational interface with perfect crystallinity and negligible chemical intermixing. Performance-wise, the interfacial layer of 6 nm in RuO2 adjacent to SrRuO3 exhibits a nonzero magnetic moment, contributing to an enhanced anomalous Hall effect (AHE) at low temperatures. Furthermore, our observations indicate that, in contrast to SrRuO3 single layers, the AHE of [(RuO2)15/(SrRuO3)n] heterostructures shows nonlinear behavior and reaches its maximum when the SrRuO3 thickness reaches tens of nm. These results suggest that the interfacial magnetic interaction surpasses that of all-perovskite oxides (~5-unit cells). This study underscores the significance and potential applications of magnetic interactions based on the crystallographic asymmetric interfaces in the design of spintronic devices.

cond-mat.mtrl-sci

Deteriorated Interlayer Coupling in Twisted Bilayer Cobaltites

A wealth of remarkable behaviors is observed at the interfaces between magnetic oxides due to the coexistence of Coulomb repulsion and interatomic exchange interactions. While previous research has focused on bonded oxide heterointerfaces, studies on magnetism in van der Waals interfaces remain rare. In this study, we stacked two freestanding cobaltites with precisely controlled twist angles. Scanning transmission electron microscopy revealed clear and ordered moir\'e patterns, which exhibit an inverse relationship with the twist angle. We found that the Curie temperature in the twisted region is reduced by approximately 13 K compared to the single-layer region using nitrogen-vacancy (NV) magnetometry. This phenomenon may be related to the weakening of the orbital hybridization between oxygen ions and transition metal ions in the unbonded interfaces. Our findings suggest a potential avenue for modulating magnetic interactions in correlated systems through twist, providing opportunities for the discovery of unknown quantum states.

cond-mat.mtrl-sci

Metal-to-insulator transition in oxide semimetals by anion doping

Oxide semimetals exhibiting both nontrivial topological characteristics stand as exemplary parent compounds and multiple degrees of freedom, offering great promise for the realization of novel electronic states. In this study, we present compelling evidence of profound structural and transport phase shifts in a recently uncovered oxide semimetal, SrNbO3, achieved through effective in-situ anion doping. Notably, a remarkable increase in resistivity of more than three orders of magnitude at room temperature is observed upon nitrogen-doping. The extent of electronic modulation in SrNbO3 is strongly correlated with the misfit strain, underscoring its phase instability to both chemical doping and crystallographic symmetry variations. Using first-principles calculations, we discern that elevating the level of nitrogen doping induces an upward shift in the conductive bands of SrNbO3-dNd. Consequently, a transition from a metallic state to an insulating state becomes apparent as the nitrogen concentration reaches a threshold of 1/3. This investigation sheds light on the potential of anion engineering in oxide semimetals, offering pathways for manipulating their physical properties. These insights hold promise for future applications that harness these materials for tailored functionalities.

cond-mat.mtrl-sci

Strain mediated phase crossover in Ruddlesden Popper nickelates

Recent progress on the signatures of pressure-induced high temperature superconductivity in Ruddlesden Popper (RP) nickelates (Lan+1NinO3n+1) has attracted growing interest in both theoretical calculations and experimental efforts. The fabrication of high-quality single crystalline RP nickelate thin films is critical for possible reducing the superconducting transition pressure and advancing applications in microelectronics in the future. In this study, we report the observations of an active phase transition in RP nickelate films induced by misfit strain. We found that RP nickelate films favor the perovskite structure (n = infinite) under tensile strains, while compressive strains stabilize the La3Ni2O7 (n = 2) phase. The selection of distinct phases is governed by the strain dependent formation energy and electronic configuration. In compressively strained La3Ni2O7, we experimentally determined splitting energy is ~0.2 eV and electrons prefer to occupy in-plane orbitals. First principles calculations unveil a robust coupling between strain effects and the valence state of Ni ions in RP nickelates, suggesting a dual driving force for the inevitable phase co-existence transition in RP nickelates. Our work underscores the sensitivity of RP nickelate formation to epitaxial strain, presenting a significant challenge in fabricating pure-phase RP nickelate films. Therefore, special attention to stacking defects and grain boundaries between different RP phases is essential when discussing the pressure-induced superconductivity in RP nickelates.

cond-mat.supr-con

Syntropic spin alignment at the interface between ferromagnetic and superconducting nitrides

The magnetic correlations at the superconductor/ferromagnet (S/F) interfaces play a crucial role in realizing dissipation-less spin-based logic and memory technologies, such as triplet-supercurrent spin-valves and "{\pi}" Josephson junctions. Here we report the coexistence of an induced large magnetic moment and a crypto ferromagnetic state at high-quality nitride S/F interfaces. Using polarized neutron reflectometry and d. c. SQUID measurements, we quantitatively determined the magnetization profile of S/F bilayer and confirmed the induced magnetic moment in the adjacent superconductor only exists below TC. Interestingly, the direction of the induced moment in the superconductors was unexpectedly parallel to that in the ferromagnet, which contrasts with earlier findings in S/F heterostructures based on metals or oxides. The first-principles calculations verify the observed unusual interfacial spin texture is caused by the Heisenberg direct exchange coupling through d orbital overlapping and severe charge transfer across the interfaces. Our work establishes an incisive experimental probe for understanding the magnetic proximity behavior at S/F interfaces and provides a prototype epitaxial building block for superconducting spintronics.

cond-mat.supr-con

Miniature Magnetic Nano islands in a Morphotropic Cobaltite Matrix

High-density magnetic memories are key components in spintronics, quantum computing, and energy-efficient electronics. Reduced dimensionality and magnetic domain stability at the nanoscale are essential for the miniaturization of magnetic storage units. Yet, inducing magnetic order, and selectively tuning spin-orbital coupling at specific locations have remained challenging. Here we demonstrate the construction of switchable magnetic nano-islands in a nonmagnetic matrix based on cobaltite homo-structures. The magnetic and electronic states are laterally modified by epitaxial strain, which is regionally controlled by freestanding membranes. Atomically sharp grain boundaries isolate the crosstalk between magnetically distinct regions. The minimal size of magnetic nano-islands reaches 35 nm in diameter, enabling an areal density of 400 Gbit per inch square. Besides providing an ideal platform for precisely controlled read and write schemes, this methodology can enable scalable and patterned memories on silicon and flexible substrates for various applications.

cond-mat.mtrl-sci

Synthesis of functional nitride membranes using sacrificial water-soluble BaO layers

Transition metal nitrides (TMNs) exhibit fascinating physical properties that hold great potential in future device applications. To stack two-dimensional TMNs with other functional materials that have dissimilar orientations and symmetries requires to separate epitaxial TMNs from the growth substrates. However, the lattice constants of TMNs are not compatible with those of most sacrificial layers, leading to a great challenge to fabricate high-quality single crystalline TMN membranes. In this letter, we report the application of a water-soluble BaO sacrificial layer as a general approach to create freestanding TMN membranes. Taken CrN as an example, the relatively small lattice mismatch and identical cubic structure between BaO and CrN ensure the growth of heterostructures. Millimeter-size CrN membrane allows us to directly observe the planar-view of atomic structure and to correlate its electronic state with intrinsic transport properties. Our work provides the opportunity to fabricate freestanding TMN membranes and the ability to transfer them to arbitrary substrates. The integration of TMN membranes with other materials will stimulate further studies in the emergent phenomena at heterointerfaces.

cond-mat.mtrl-sci

Emergent magnetic states and tunable exchange bias at all 3d nitride heterointerfaces

Interfacial magnetism stimulates the discovery of giant magnetoresistance and spin-orbital coupling across the heterointerfaces, facilitating the intimate correlation between spin transport and complex magnetic structures. Over decades, functional heterointerfaces composed of nitrides are seldomly explored due to the difficulty in synthesizing high-quality and correct composition nitride films. Here we report the fabrication of single-crystalline ferromagnetic Fe3N thin films with precisely controlled thickness. As film thickness decreasing, the magnetization deteriorates dramatically, and electronic state transits from metallic to insulating. Strikingly, the high-temperature ferromagnetism maintains in a Fe3N layer with a thickness down to 2 u. c. (~ 8 {\AA}). The magnetoresistance exhibits a strong in-plane anisotropy and meanwhile the anomalous Hall resistance reserves its sign when Fe3N layer thickness exceeds 5 u. c. Furthermore, we observe a sizable exchange bias at the interfaces between a ferromagnetic Fe3N and an antiferromagnetic CrN. The exchange bias field and saturation moment strongly depend on the controllable bending curvature using cylinder diameter engineering (CDE) technique, implying the tunable magnetic states under lattice deformation. This work provides a guideline for exploring functional nitride films and applying their interfacial phenomena for innovative perspectives towards the practical applications.

cond-mat.mtrl-sci

Topological cavity based on slow light topological edge mode for broadband Purcell enhancement

Slow light in topological valley photonic crystal structures offers new possibilities to enhance light-matter interaction. We report a topological cavity based on slow light topological edge mode for broadband Purcell enhancement. The topological edge modes with large group indices over 100 can be realized with a bearded interface between two topologically distinct valley photonic crystals, featuring the greatly enhanced Purcell factor because of the increased local density of states. In the slow light regime, the topological cavity supports much more cavity modes with higher quality factor than that in the fast light regime, which is both demonstrated theoretically and experimentally. We demonstrate the cavity enables the broadband Purcell enhancement together with substantial Purcell factor, benefiting from dense cavity modes with high quality factor in a wide spectral range. It has great benefit to the realization of high-efficiency quantum-dot-based single-photon sources and entangled-photon sources with less restriction on spectral match. Such topological cavity could serve as a significant building block toward the development of photonic integrated circuits with embedded quantum emitters.

physics.optics

Weak value amplification via second-order correlated technique

We propose a new framework combining weak measurement and second-order correlated technique. The theoretical analysis shows that WVA experiment can also be implemented by a second-order correlated system. We then build two-dimensional second-order correlated function patterns for achieving higher amplification factor and discuss the signal-to-noise ratio influence. Several advantages can be obtained by our proposal. For instance, detectors with high resolution are not necessary. Moreover, detectors with low saturation intensity are available in WVA setup. Finally, type-one technical noise can be effectively suppressed.

physics.optics