arXiv subjects

Tobias J. Kippenberg

Publications and source records attributed to Tobias J. Kippenberg.

At least 127 records · Page 7Linked to original sources

arXiv2020

Soliton microcomb based spectral domain optical coherence tomography

Spectral domain optical coherence tomography (SD-OCT) is a widely used and minimally invaive technique for bio-medical imaging [1]. SD-OCT typically relies on the use of superluminescent diodes (SLD), which provide a low-noise and broadband optical spectrum. Recent advances in photonic chipscale frequency combs [2, 3] based on soliton formation in photonic integrated microresonators provide an chipscale alternative illumination scheme for SD-OCT. Yet to date, the use of such soliton microcombs in OCT has not yet been analyzed. Here we explore the use of soliton microcombs in spectral domain OCT and show that, by using photonic chipscale Si3N4 resonators in conjunction with 1300 nm pump lasers, spectral bandwidths exceeding those of commercial SLDs are possible. We demonstrate that the soliton states in microresonators exhibit a noise floor that is ca. 3 dB lower than for the SLD at identical power, but can exhibit significantly lower noise performance for powers at the milliWatt level. We perform SD-OCT imaging on an ex vivo fixed mouse brain tissue using the soliton microcomb, alongside an SLD for comparison, and demonstrate the principle viability of soliton based SD-OCT. Importantly, we demonstrate that classical amplitude noise of all soliton comb teeth are correlated, i.e. common mode, in contrast to SLD or incoherent microcomb states [4], which should, in theory, improve the image quality. Moreover, we demonstrate the potential for circular ranging, i.e. optical sub-sampling [5, 6], due to the high coherence and temporal periodicity of the soliton state. Taken together, our work indicates the promising properties of soliton microcombs for SD-OCT.

physics.optics↗

arXiv2020

Optomechanical generation of a mechanical catlike state by phonon subtraction

We propose a scheme to prepare a macroscopic mechanical oscillator in a catlike state, close to a coherent state superposition. The mechanical oscillator, coupled by radiation-pressure interaction to a field in an optical cavity, is first prepared close to a squeezed vacuum state using a reservoir engineering technique. The system is then probed using a short optical pulse tuned to the lower motional sideband of the cavity resonance, realizing a photon-phonon swap interaction. A photon number measurement of the photons emerging from the cavity then conditions a phonon-subtracted catlike state with a negative Wigner distribution exhibiting separated peaks and multiple interference fringes. We show that this scheme is feasible using state-of-the-art photonic crystal optomechanical system.

quant-ph↗

arXiv2020

Monolithic piezoelectric control of soliton microcombs

High-speed laser frequency actuation is critical in all applications employing lasers and frequency combs, and is prerequisite for phase locking, frequency stabilization and stability transfer among multiple optical carriers. Soliton microcombs have emerged as chip-scale, broadband and low-power-consumption frequency comb sources.Yet, integrated microcombs relying on thermal heaters for on-chip actuation all exhibit only kilohertz actuation bandwidth. Consequently, high-speed actuation and locking of microcombs have been attained only with off-chip bulk modulators. Here, we present high-speed microcomb actuation using integrated components. By monolithically integrating piezoelectric AlN actuators on ultralow-loss Si3N4 photonic circuits, we demonstrate voltage-controlled soliton tuning, modulation and stabilization. The integrated AlN actuators feature bi-directional tuning with high linearity and low hysteresis, operate with 300 nW power and exhibit flat actuation response up to megahertz frequency, significantly exceeding bulk piezo tuning bandwidth. We use this novel capability to demonstrate a microcomb engine for parallel FMCW LiDAR, via synchronously tuning the laser and microresonator. By applying a triangular sweep at the modulation rate matching the frequency spacing of HBAR modes, we exploit the resonant build-up of bulk acoustic energy to significantly lower the required driving to a CMOS voltage of only 7 Volts. Our approach endows soliton microcombs with integrated, ultralow-power-consumption, and fast actuation, significantly expanding the repertoire of technological applications.

physics.app-ph↗

arXiv2019

Laser cooling of a nanomechanical oscillator to the zero-point energy

Optomechanical cavities in the well-resolved-sideband regime are ideally suited for the study of a myriad of quantum phenomena with mechanical systems, including backaction-evading measurements, mechanical squeezing, and generation of non-classical states. For these experiments, the mechanical oscillator should be prepared in its ground state; residual motion beyond the zero-point motion must be negligible. The requisite cooling of the mechanical motion can be achieved using the radiation pressure of light in the cavity by selectively driving the anti-Stokes optomechanical transition. To date, however, laser-absorption heating of optical systems far into the resolved-sideband regime has prohibited strong driving. For deep ground-state cooling, previous studies have therefore resorted to passive cooling in dilution refrigerators. Here, we employ a highly sideband-resolved silicon optomechanical crystal in a $^3$He buffer gas environment at $\sim 2\text{K}$ to demonstrate laser sideband cooling to a mean thermal occupancy of $0.09_{-0.01}^{+0.02}$ quantum (self-calibrated using motional sideband asymmetry), which is $-7.4\text{dB}$ of the oscillator's zero-point energy and corresponds to 92% ground state probability. Achieving such low occupancy by laser cooling opens the door to a wide range of quantum-optomechanical experiments in the optical domain.

quant-ph↗

arXiv2019

Massively parallel coherent laser ranging using soliton microcombs

Coherent ranging, also known as frequency-modulated continuous-wave (FMCW) laser based ranging (LIDAR) is currently developed for long range 3D distance and velocimetry in autonomous driving. Its principle is based on mapping distance to frequency, and to simultaneously measure the Doppler shift of reflected light using frequency chirped signals, similar to Sonar or Radar. Yet, despite these advantages, coherent ranging exhibits lower acquisition speed and requires precisely chirped and highly-coherent laser sources, hindering their widespread use and impeding Parallelization, compared to modern time-of-flight (TOF) ranging that use arrays of individual lasers. Here we demonstrate a novel massively parallel coherent LIDAR scheme using a photonic chip-based microcomb. By fast chirping the pump laser in the soliton existence range of a microcomb with amplitudes up to several GHz and sweep rate up to 10 MHz, the soliton pulse stream acquires a rapid change in the underlying carrier waveform, while retaining its pulse-to-pulse repetition rate. As a result, the chirp from a single narrow-linewidth pump laser is simultaneously transferred to all spectral comb teeth of the soliton at once, and allows for true parallelism in FMCW LIDAR. We demonstrate this approach by generating 30 distinct channels, demonstrating both parallel distance and velocity measurements at an equivalent rate of 3 Mpixel/s, with potential to improve sampling rates beyond 150 Mpixel/s and increase the image refresh rate of FMCW LIDAR up to two orders of magnitude without deterioration of eye safety. The present approach, when combined with photonic phase arrays based on nanophotonic gratings, provides a technological basis for compact, massively parallel and ultra-high frame rate coherent LIDAR systems.

physics.app-ph↗

arXiv2019

Fractal-like mechanical resonators with soft-clamped fundamental mode

Self-similar structures occur naturally and have been employed to engineer exotic physical properties. Here we show that acoustic modes of a fractal-like system of tensioned strings can display increased mechanical quality factors due to the enhancement of dissipation dilution. We describe a realistic resonator design in which the quality factor of the fundamental mode is enhanced by as much as two orders of magnitude compared to a simple string with the same size and tension. Our findings can open new avenues in force sensing, cavity quantum optomechanics and experiments with suspended test masses.

cond-mat.mes-hall↗

arXiv2019

Ultralow-Noise Photonic Microwave Synthesis using a Soliton Microcomb-based Transfer Oscillator

The synthesis of ultralow-noise microwaves is of both scientific and technological relevance for timing, metrology, communications and radio-astronomy. Today, the lowest reported phase noise signals are obtained via optical frequency-division using mode-locked laser frequency combs. Nonetheless, this technique ideally requires high repetition rates and tight comb stabilisation. Here, a soliton microcomb with a 14 GHz repetition rate is generated with an ultra-stable pump laser and used to derive an ultralow-noise microwave reference signal, with an absolute phase noise level below -60 dBc/Hz at 1 Hz offset frequency and -135 dBc/Hz at 10 kHz. This is achieved using a transfer oscillator approach, where the free-running microcomb noise (which is carefully studied and minimised) is cancelled via a combination of electronic division and mixing. Although this proof-of-principle uses an auxiliary comb for detecting the microcomb's offset frequency, we highlight the prospects of this method with future self-referenced integrated microcombs and electro-optic combs, that would allow for ultralow-noise microwave and sub-terahertz signal generators.

physics.app-ph↗

arXiv2019

Nanophotonic soliton-based microwave synthesizers

Microwave photonic technologies, which upshift the carrier into the optical domain to facilitate the generation and processing of ultrawide-band electronic signals at vastly reduced fractional bandwidths, have the potential to achieve superior performance compared to conventional electronics for targeted functions. For microwave photonic applications such as filters, coherent radars, subnoise detection, optical communications and low-noise microwave generation, frequency combs are key building blocks. By virtue of soliton microcombs, frequency combs can now be built using CMOS compatible photonic integrated circuits, operated with low power and noise, and have already been employed in system-level demonstrations. Yet, currently developed photonic integrated microcombs all operate with repetition rates significantly beyond those that conventional electronics can detect and process, compounding their use in microwave photonics. Here we demonstrate integrated soliton microcombs operating in two widely employed microwave bands, X- and K-band. These devices can produce more than 300 comb lines within the 3-dB-bandwidth, and generate microwave signals featuring phase noise levels below 105 dBc/Hz (140 dBc/Hz) at 10 kHz (1 MHz) offset frequency, comparable to modern electronic microwave synthesizers. In addition, the soliton pulse stream can be injection-locked to a microwave signal, enabling actuator-free repetition rate stabilization, tuning and microwave spectral purification, at power levels compatible with silicon-based lasers (<150 mW). Our results establish photonic integrated soliton microcombs as viable integrated low-noise microwave synthesizers. Further, the low repetition rates are critical for future dense WDM channel generation schemes, and can significantly reduce the system complexity of photonic integrated frequency synthesizers and atomic clocks.

physics.optics↗

arXiv2019

Two-Tone Optomechanical Instability and Its Fundamental Implications for Backaction-Evading Measurements

While quantum mechanics imposes a fundamental limit on the precision of interferometric measurements of mechanical motion due to measurement backaction, the nonlinear nature of the coupling also leads to parametric instabilities that place practical limits on the sensitivity by limiting the power in the interferometer. Such instabilities have been extensively studied in the context of gravitational wave detectors, and their presence has recently been reported in Advanced LIGO. Here, we observe experimentally and describe theoretically a new type of optomechanical instability that arises in two-tone backaction-evading (BAE) measurements, designed to overcome the standard quantum limit, and demonstrate the effect in the optical domain with a photonic crystal nanobeam, and in the microwave domain with a micromechanical oscillator coupled to a microwave resonator. In contrast to the well-known oscillatory parametric instability that occurs in single-tone, blue-detuned pumping, which is characterized by a vanishing effective mechanical damping, the parametric instability in balanced two-tone optomechanics is exponential, and is a result of small detuning errors in the two pump frequencies. Its origin can be understood in a rotating frame as the vanishing of the effective mechanical frequency due to an optical spring effect. Counterintuitively, the instability occurs even in the presence of perfectly balanced intracavity fields, and can occur for both signs of detuning. We find excellent quantitative agreement with our theoretical predictions. Since the constraints on tuning accuracy become stricter with increasing probe power, it imposes a fundamental limitation on BAE measurements, as well as other two-tone schemes. In addition to introducing a new limitation in two-tone BAE measurements, the results also introduce a new type of nonlinear dynamics in cavity optomechanics.

quant-ph↗

arXiv2019

Integrated turnkey soliton microcombs operated at CMOS frequencies

While soliton microcombs offer the potential for integration of powerful frequency metrology and precision spectroscopy systems, their operation requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components. Moreover, CMOS-rate microcombs, required in nearly all comb systems, have resisted integration because of their power requirements. Here, a regime for turnkey operation of soliton microcombs co-integrated with a pump laser is demonstrated and theoretically explained. Significantly, a new operating point is shown to appear from which solitons are generated through binary turn-on and turn-off of the pump laser, thereby eliminating all photonic/electronic control circuitry. These features are combined with high-Q $Si_3N_4$ resonators to fully integrate into a butterfly package microcombs with CMOS frequencies as low as 15 GHz, offering compelling advantages for high-volume production.

physics.optics↗

arXiv2019

Controlling free electrons with optical whispering-gallery modes

Free-electron beams serve as uniquely versatile probes of microscopic structure and composition, and have repeatedly revolutionized atomic-scale imaging, from solid-state physics to structural biology. Over the past decade, the manipulation and interaction of electrons with optical fields has seen significant progress, enabling novel imaging methods, schemes of near-field electron acceleration, and culminating in 4D microscopy techniques with both high temporal and spatial resolution. However, weak coupling strengths of electron beams to optical excitations are a standing issue for existing and emerging applications of optical free-electron control. Here, we demonstrate phase matched near-field coupling of a free-electron beam to optical whispering gallery modes of dielectric microresonators. The cavity-enhanced interaction with these optically excited modes imprints a strong phase modulation on co-propagating electrons, which leads to electron-energy sidebands up to hundreds of photon orders and a spectral broadening of 700 eV. Mapping the near-field interaction with ultrashort electron pulses in space and time, we trace the temporal ring-down of the microresonator following a femtosecond excitation and observe the cavity's resonant spectral response. Resonantly enhancing the coupling of electrons and light via optical cavities, with efficient injection and extraction, can open up novel applications such as continuous-wave acceleration, attosecond structuring, and real-time all-optical electron detection.

physics.optics↗

arXiv2019

Dynamics of soliton crystals in optical microresonators

Dissipative Kerr solitons in optical microresonators provide a unifying framework for nonlinear optical physics with photonic-integrated technologies and have recently been employed in a wide range of applications from coherent communications to astrophysical spectrometer calibration. Dissipative Kerr solitons can form a rich variety of stable states, ranging from breathers to multiple-soliton formations, among which, the recently discovered soliton crystals stand out. They represent temporally-ordered ensembles of soliton pulses, which can be regularly arranged by a modulation of the continuous-wave intracavity driving field. To date, however, the dynamics of soliton crystals remains mainly unexplored. Moreover, the vast majority of the reported crystals contained defects - missing or shifted pulses, breaking the symmetry of these states, and no procedure to avoid such defects was suggested. Here we explore the dynamical properties of soliton crystals and discover that often-neglected chaotic operating regimes of the driven optical microresonator are the key to their understanding. In contrast to prior work, we prove the viability of deterministic generation of $\mathrm{perfect}$ soliton crystal states, which correspond to a stable, defect-free lattice of optical pulses inside the cavity. We discover the existence of critical pump power, below which the stochastic process of soliton excitation suddenly becomes deterministic enabling faultless, device-independent access to perfect soliton crystals. Furthermore, we demonstrate the switching of soliton crystal states and prove that it is also tightly linked to the pump power and is only possible in the regime of transient chaos. Finally, we report a number of other dynamical phenomena experimentally observed in soliton crystals including the formation of breathers, transitions between soliton crystals, their melting, and recrystallization.

physics.optics↗

arXiv2019

Observation of stimulated Brillouin scattering in silicon nitride integrated waveguides

Silicon nitride (Si3N4) has emerged as a promising material for integrated nonlinear photonics and has been used for broadband soliton microcombs and low-pulse-energy supercontinuum generation. Therefore understanding all nonlinear optical properties of Si3N4 is important. So far, only stimulated Brillouin scattering (SBS) has not been reported. Here we observe, for the first time, backward SBS in fully cladded Si3N4 waveguides. The Brillouin gain spectrum exhibits an unusual multi-peak structure resulting from hybridization with with high-overtone bulk acoustic resonances (HBARs) of the silica cladding. The reported intrinsic Si3N4 Brillouin gain at 25 GHz is estimated as 7x10^-13 m/W. Moreover, the magnitude of the Si3N4 photoelastic constant is estimated as |p12| = 0.047 +/- 0.004. Since SBS imposes an optical power limitation for waveguides, our results explain the capability of Si3N4 to handle high optical power, central for integrated nonlinear photonics.

physics.optics↗

arXiv2019

Floquet dynamics in quantum measurement of mechanical motion

The radiation-pressure interaction between one or more laser fields and a mechanical oscillator gives rise to a wide range of phenomena: from sideband cooling and backaction-evading measurements to pondermotive and mechanical squeezing to entanglement and motional sideband asymmetry. In many protocols, such as dissipative mechanical squeezing, multiple lasers are utilized, giving rise to periodically driven optomechanical systems. Here we show that in this case, Floquet dynamics can arise due to presence of Kerr-type nonlinearities, which are ubiqitious in optomechanical systems. Specifically, employing multiple probe tones, we perform sideband asymmetry measurements, a macroscopic quantum effect, on a silicon optomechanical crystal sideband-cooled to 40% ground-state occupation. We show that the Floquet dynamics, resulting from the presence of multiple pump tones, gives rise to an artificially modified motional sideband asymmetry by redistributing thermal and quantum fluctuations among the initially independently scattered thermomechanical sidebands. For pump tones exhibiting large frequency separation, the dynamics is suppressed and accurate quantum noise thermometry demonstrated. We develop a theoretical model based on Floquet theory that accurately describes our observations. The resulting dynamics can be understood as resulting from a synthetic gauge field among the Fourier modes, which is created by the phase lag of the Kerr-type response. This novel phenomenon has wide-ranging implications for schemes utilizing several pumping tones, as commonly employed in backaction-evading measurements, dissipative optical squeezing, dissipative mechanical squeezing and quantum noise thermometry. Our observation may equally well be used for optomechanical Floquet engineering, e.g. generation of topological phases of sound by periodic time-modulation.

quant-ph↗

arXiv2019

Nanophotonic supercontinuum based mid-infrared dual-comb spectroscopy

High resolution and fast detection of molecular vibrational absorption is important for organic synthesis, pharmaceutical process and environmental monitoring, and is enabled by mid-infrared (mid-IR) laser frequency combs via dual-comb spectroscopy. Here, we demonstrate a novel and highly simplified approach to broadband mid-IR dual-comb spectroscopy via supercontinuum generation, achieved using unprecedented nanophotonic dispersion engineering that allows for flat-envelope, ultra-broadband mid-IR comb spectra. The mid-IR dual-comb has an instantaneous bandwidth covering the functional group region from 2800-3600 1/cm, comprising more than 100,000 comb lines, enabling parallel gas-phase detection with a high sensitivity, spectral resolution, and speed. In addition to the traditional functional groups, their isotopologues are also resolved in the supercontinuum based dual-comb spectroscopy. Our approach combines well established fiber laser combs, digital coherent data averaging, and integrated nonlinear photonics, each in itself a state-of-the-art technology, signalling the emergence of mid-IR dual-comb spectroscopy for use outside of the protected laboratory environment.

physics.optics↗

arXiv2019

Hybrid Integrated Photonics Using Bulk Acoustic Resonators

Microwave frequency acousto-optic modulation is realized by exciting high overtone bulk acoustic wave resonances (HBAR resonances) in the photonic stack. These confined mechanical stress waves transmit exhibit vertically transmitting, high quality factor (Q) acoustic Fabry Perot resonances that extend into the Gigahertz domain, and offer stress-optical interaction with the optical modes of the microresonator. Although HBAR are ubiquitously used in modern communication, and often exploited in superconducting circuits, this is the first time they have been incorporated on a photonic circuit based chip. The electro-acousto-optical interaction observed within the optical modes exhibits high actuation linearity, low actuation power and negligible crosstalk. Using the electro-acousto-optic interaction, fast optical resonance tuning is achieved with sub-nanosecond transduction time. By removing the silicon backreflection, broadband acoustic modulation at 4.1 and 8.7 GHz is realized with a 3 dB bandwidth of 250 MHz each. The novel hybrid HBAR nanophotonic platform demonstrated here, allowing on chip integration of micron-scale acoustic and photonic resonators, can find immediate applications in tunable microwave photonics, high bandwidth soliton microcomb stabilization, compact opto-electronic oscillators, and in microwave to optical conversion schemes. Moreover the hybrid platform allows implementation of momentum biasing, which allows realization of on chip non-reciprocal devices such as isolators or circulators and topological photonic bandstructures.

physics.app-ph↗

arXiv2019

Packaged photonic chip-based soliton microcomb using an ultralow-noise laser

Photonic chip-based soliton microcombs have shown rapid progress and have already been used in many system-level applications, including coherent communications, astrophysical spectrometer calibration and ultrafast ranging. While there has been substantial progress in realizing soliton microcombs that rely on compact laser diodes, culminating in devices that only utilize a semiconductor amplifier or a self-injection-locked laser as a pump source, accessing and generating single soliton states with electronically detectable line rates from a compact laser module has remained challenging. Here we demonstrate a current-initiated, $\mathrm{Si_3N_4}$ chip-based, 99-GHz soliton microcomb driven directly by an ultra-compact, low-noise laser. This approach does not require any fast laser tuning mechanism, and single soliton states can be accessed by changing the current of the laser diode. A simple, yet reliable, packaging technique has been developed to demonstrate the viability of such a microcomb system in field-deployable applications.

physics.app-ph↗

arXiv2019

High-Rate Photon Pairs and Sequential Time-Bin Entanglement with Si$_3$N$_4$ Ring Microresonators

Integrated photonics is increasing in importance for compact, robust, and scalable enabling quantum technologies. This is particularly interesting for developing quantum communication networks, where resources need to be deployed in the field. We exploit photonic chip-based $ \rm Si_3 N_4$ ring microresonators for the generation of photon pairs with low-loss, high-noise suppression and coincidence rates of $80\times 10^3\,$s$^{-1}$. A simple photonic noise characterisation technique is presented that distinguishes linear and nonlinear contributions that is useful for system design and optimisation. We then demonstrate an all-fibre $750\,$MHz clock-rate sequential Time-Bin entanglement scheme with raw interference visibilities $>\,98\,\%$.

quant-ph↗