arXiv subjects

Tobin J. Marks

Publications and source records attributed to Tobin J. Marks.

28 records · Page 2Linked to original sources

arXiv2014

Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing

In the last three decades, zero-dimensional, one-dimensional, and two-dimensional carbon nanomaterials (i.e., fullerenes, carbon nanotubes, and graphene, respectively) have attracted significant attention from the scientific community due to their unique electronic, optical, thermal, mechanical, and chemical properties. While early work showed that these properties could enable high performance in selected applications, issues surrounding structural inhomogeneity and imprecise assembly have impeded robust and reliable implementation of carbon nanomaterials in widespread technologies. However, with recent advances in synthesis, sorting, and assembly techniques, carbon nanomaterials are experiencing renewed interest as the basis of numerous scalable technologies. Here, we present an extensive review of carbon nanomaterials in electronic, optoelectronic, photovoltaic, and sensing devices with a particular focus on the latest examples based on the highest purity samples. Specific attention is devoted to each class of carbon nanomaterial, thereby allowing comparative analysis of the suitability of fullerenes, carbon nanotubes, and graphene for each application area. In this manner, this article will provide guidance to future application developers and also articulate the remaining research challenges confronting this field.

cond-mat.mes-hall↗

arXiv2013

Gate-tunable carbon nanotube-MoS2 heterojunction p-n diode

The p-n junction diode and field-effect transistor (FET) are the two most ubiquitous building blocks of modern electronics and optoelectronics. In recent years, the emergence of reduced dimensionality materials has suggested that these components can be scaled down to atomic thicknesses. Although high performance field-effect devices have been achieved from monolayered materials and their heterostructures, a p-n heterojunction diode derived from ultrathin materials is notably absent and constrains the fabrication of complex electronic and optoelectronic circuits. Here, we demonstrate a gate-tunable p-n heterojunction diode using semiconducting single-walled carbon nanotubes (s-SWCNTs) and single-layer molybdenum disulfide (SL-MoS2) as p-type and n-type semiconductors, respectively. The vertical stacking of these two direct band gap semiconductors forms a heterojunction with electrical characteristics that can be tuned with an applied gate bias to achieve a wide range of charge transport behavior ranging from insulating to rectifying with forward-to-reverse bias current ratios exceeding 10^4. This heterojunction diode also responds strongly to optical irradiation with an external quantum efficiency (EQE) of 25% and fast photoresponse < 15 μs. Since SWCNTs have a diverse range of electrical properties as a function of chirality, and since an increasing number of atomically thin 2D nanomaterials are being isolated, the gate-tunable p-n heterojunction concept presented here should be widely generalizable to realize diverse ultrathin, high-performance electronics and optoelectronics.

cond-mat.mtrl-sci↗

arXiv2013

Low Frequency Electronic Noise in Single-Layer MoS2 Transistors

Ubiquitous low frequency 1/f noise can be a limiting factor in the performance and application of nanoscale devices. Here, we quantitatively investigate low frequency electronic noise in single-layer transition metal dichalcogenide MoS2 field-effect transistors. The measured 1/f noise can be explained by an empirical formulation of mobility fluctuations with the Hooge parameter ranging between 0.005 and 2.0 in vacuum (< 10-5 Torr). The field-effect mobility decreased and the noise amplitude increased by an order of magnitude in ambient conditions, revealing the significant influence of atmospheric adsorbates on charge transport. In addition, single Lorentzian generation-recombination noise was observed to increase by an order of magnitude as the devices were cooled from 300 K to 6.5 K.

cond-mat.mes-hall↗

arXiv2013

Elucidating the photoresponse of ultrathin MoS2 field-effect transistors by scanning photocurrent microscopy

The mechanisms underlying the intrinsic photoresponse of few-layer (FL) molybdenum disulphide (MoS2) field-effect transistors are investigated via scanning photocurrent microscopy. We attribute the locally enhanced photocurrent to band-bending assisted separation of photoexcited carriers at the MoS2/Au interface. The wavelength-dependent photocurrents of few layer MoS2 transistors qualitatively follow the optical absorption spectra of MoS2, providing direct evidence of interband photoexcitation. Time and spectrally resolved photocurrent measurements at varying external electric fields and carrier concentrations establish that drift-diffusion currents dominate photothermoelectric currents in devices under bias.

cond-mat.mes-hall↗

arXiv2013

Optimization of graphene dry etching conditions via combined microscopic and spectroscopic analysis

Single-layer graphene structures and devices are commonly defined using reactive ion etching and plasma etching with O2 or Ar as the gaseous etchants. Although optical microscopy and Raman spectroscopy are widely used to determine the appropriate duration of dry etching, additional characterization with atomic force microscopy (AFM) reveals that residual graphene and/or etching byproducts persist beyond the point where the aforementioned methods suggest complete graphene etching. Recognizing that incomplete etching may have deleterious effects on devices and/or downstream processing, AFM characterization is used here to determine optimal etching conditions that eliminate graphene dry etching residues.

cond-mat.mtrl-sci↗

arXiv2013

Band-Like Transport in High Mobility Unencapsulated Single-Layer MoS2 Transistors

Ultra-thin MoS2 has recently emerged as a promising two-dimensional semiconductor for electronic and optoelectronic applications. Here, we report high mobility (>60 cm2/Vs at room temperature) field-effect transistors that employ unencapsulated single-layer MoS2 on oxidized Si wafers with a low level of extrinsic contamination. While charge transport in the sub-threshold regime is consistent with a variable range hopping model, monotonically decreasing field-effect mobility with increasing temperature suggests band-like transport in the linear regime. At temperatures below 100 K, temperature-independent mobility is limited by Coulomb scattering, whereas, at temperatures above 100 K, phonon-limited mobility decreases as a power law with increasing temperature.

cond-mat.mes-hall↗

arXiv2013

Quantitatively Enhanced Reliability and Uniformity of High-κ Dielectrics on Graphene Enabled by Self-Assembled Seeding Layers

The full potential of graphene in integrated circuits can only be realized with a reliable ultra-thin high-κ top-gate dielectric. Here, we report the first statistical analysis of the breakdown characteristics of dielectrics on graphene, which allows the simultaneous optimization of gate capacitance and the key parameters that describe large-area uniformity and dielectric strength. In particular, vertically heterogeneous and laterally homogenous Al2O3 and HfO2 stacks grown via atomic-layer deposition and seeded by a molecularly thin perylene-3,4,9,10-tetracarboxylic dianhydride organic monolayer exhibit high uniformities (Weibull shape parameter β > 25) and large breakdown strengths (Weibull scale parameter, EBD > 7 MV/cm) that are comparable to control dielectrics grown on Si substrates.

cond-mat.mtrl-sci↗

arXiv2013

Extrinsic and Intrinsic Photoresponse in Monodisperse Carbon Nanotube Thin Film Transistors

Spectroscopic, time-resolved scanning photocurrent microscopy is shown to distinguish the intrinsic photoresponse of monodisperse semiconducting (99%) single-walled carbon nanotubes (SWCNTs) from the extrinsic photoresponse of the substrate. A persistent positive photocurrent induced by near-IR excitation is attributed to the generation of free carriers by inter-band excitation in SWCNTs. For shorter excitation wavelengths, absorption by the Si substrate generates two types of photocurrent: a transient positive photoresponse, identified as a displacement current, and a persistent negative photocurrent that arises from photogating of the SWCNT thin film.

cond-mat.mes-hall↗

arXiv2012

Fundamental Performance Limits of Carbon Nanotube Thin-Film Transistors Achieved Using Hybrid Molecular Dielectrics

In the past decade, semiconducting carbon nanotube thin films have been recognized as contending materials for wide-ranging applications in electronics, energy, and sensing. In particular, improvements in large-area flexible electronics have been achieved through independent advances in post-growth processing to resolve metallic versus semiconducting carbon nanotube heterogeneity, in improved gate dielectrics, and in self-assembly processes. Moreover, controlled tuning of specific device components has afforded fundamental probes of the trade-offs between materials properties and device performance metrics. Nevertheless, carbon nanotube transistor performance suitable for real-world applications awaits understanding-based progress in the integration of independently pioneered device components. We achieve this here by integrating high-purity semiconducting carbon nanotube films with a custom-designed hybrid inorganic-organic gate dielectric. This synergistic combination of materials circumvents conventional design trade-offs, resulting in concurrent advances in several transistor performance metrics such as transconductance (6.5 μS/μm), intrinsic field-effect mobility (147 cm^2/Vs), sub-threshold swing (150 mV/decade), and on/off ratio (5 x 10^5), while also achieving hysteresis-free operation in ambient conditions.

cond-mat.mtrl-sci↗

arXiv2010

How water meets a very hydrophobic surface

Is there a low-density region ('gap') between water and a hydrophobic surface? Previous X-ray/neutron reflectivity results have been inconsistent because the effect (if any) is sub-resolution for the surfaces studied. We have used X-ray reflectivity to probe the interface between water and more hydrophobic smooth surfaces. The depleted region width increases with contact angle and becomes larger than the resolution, allowing definitive measurements. Large fluctuations are predicted at this interface; however, we find that their contribution to the interface roughness is too small to measure.

cond-mat.soft↗