arXiv subjects

Tomás Palacios

Publications and source records attributed to Tomás Palacios.

12 recordsLinked to original sources

arXiv2025

High Breakdown Electric Field (> 5 MV/cm) in UWBG AlGaN Transistors

We report on the design and demonstration of ultra-wide bandgap (UWBG) AlGaN-channel metal-insulator heterostructure field effect transistors (HEFTs) for high-power, high-frequency applications. We find that the integration of gate dielectrics and field plates greatly improves the breakdown field in these devices, with state-of-art average breakdown field of 5.3 MV/cm (breakdown voltage > 260 V) with an associated maximum current density of 342 mA/mm, and cut-off frequency of 9.1 GHz. Furthermore, low trap-related impact was observed from minimal gate and drain lag estimated from pulsed I-V characteristics. The reported results provide the potential of UWBG AlGaN HEFTs for the next generation high-power radio frequency applications.

cond-mat.mtrl-sci↗

arXiv2024

Remote-contact catalysis for target-diameter semiconducting carbon nanotube array

Electrostatic catalysis has been an exciting development in chemical synthesis (beyond enzymes catalysis) in recent years, boosting reaction rates and selectively producing certain reaction products. Most of the studies to date have been focused on using external electric field (EEF) to rearrange the charge distribution in small molecule reactions such as Diels-Alder addition, carbene reaction, etc. However, in order for these EEFs to be effective, a field on the order of 1 V/nm (10 MV/cm) is required, and the direction of the EEF has to be aligned with the reaction axis. Such a large and oriented EEF will be challenging for large-scale implementation, or materials growth with multiple reaction axis or steps. Here, we demonstrate that the energy band at the tip of an individual single-walled carbon nanotube (SWCNT) can be spontaneously shifted in a high-permittivity growth environment, with its other end in contact with a low-work function electrode (e.g., hafnium carbide or titanium carbide). By adjusting the Fermi level at a point where there is a substantial disparity in the density of states (DOS) between semiconducting (s-) and metallic (m-) SWCNTs, we achieve effective electrostatic catalysis for s-SWCNT growth assisted by a weak EEF perturbation (200V/cm). This approach enables the production of high-purity (99.92%) s-SWCNT horizontal arrays with narrow diameter distribution (0.95+-0.04 nm), targeting the requirement of advanced SWCNT-based electronics for future computing. These findings highlight the potential of electrostatic catalysis in precise materials growth, especially for s-SWCNTs, and pave the way for the development of advanced SWCNT-based electronics.

physics.app-ph↗

arXiv2020

Designing Artificial Two-Dimensional Landscapes via Room-Temperature Atomic-Layer Substitution

Manipulating materials with atomic-scale precision is essential for the development of next-generation material design toolbox. Tremendous efforts have been made to advance the compositional, structural, and spatial accuracy of material deposition and patterning. The family of 2D materials provides an ideal platform to realize atomic-level material architectures. The wide and rich physics of these materials have led to fabrication of heterostructures, superlattices, and twisted structures with breakthrough discoveries and applications. Here, we report a novel atomic-scale material design tool that selectively breaks and forms chemical bonds of 2D materials at room temperature, called atomic-layer substitution (ALS), through which we can substitute the top layer chalcogen atoms within the 3-atom-thick transition-metal dichalcogenides using arbitrary patterns. Flipping the layer via transfer allows us to perform the same procedure on the other side, yielding programmable in-plane multi-heterostructures with different out-of-plane crystal symmetry and electric polarization. First-principle calculations elucidate how the ALS process is overall exothermic in energy and only has a small reaction barrier, facilitating the reaction to occur at room temperature. Optical characterizations confirm the fidelity of this design approach, while TEM shows the direct evidence of Janus structure and suggests the atomic transition at the interface of designed heterostructure. Finally, transport and Kelvin probe measurements on MoXY (X,Y=S,Se; X and Y corresponding to the bottom and top layers) lateral multi-heterostructures reveal the surface potential and dipole orientation of each region, and the barrier height between them. Our approach for designing artificial 2D landscape down to a single layer of atoms can lead to unique electronic, photonic and mechanical properties previously not found in nature.

cond-mat.mtrl-sci↗

arXiv2020

Impact of $Al_2O_3$ Passivation on the Photovoltaic Performance of Vertical $WSe_2$ Schottky Junction Solar Cells

Transition metal dichalcogenide (TMD) materials have emerged as promising candidates for thin film solar cells due to their wide bandgap range across the visible wavelengths, high absorption coefficient and ease of integration with both arbitrary substrates as well as conventional semiconductor technologies. However, reported TMD-based solar cells suffer from relatively low external quantum efficiencies (EQE) and low open circuit voltage due to unoptimized design and device fabrication. This paper studies $Pt/WSe_2$ vertical Schottky junction solar cells with various $WSe_2$ thicknesses in order to find the optimum absorber thickness.Also, we show that the photovoltaic performance can be improved via $Al_2O_3$ passivation which increases the EQE by up to 29.5% at 410 nm wavelength incident light. The overall resulting short circuit current improves through antireflection coating, surface doping, and surface trap passivation effects. Thanks to the ${Al_2O_3}$ coating, this work demonstrates a device with open circuit voltage ($V_{OC}$) of 380 mV and short circuit current density ($J_{SC}$) of 10.7 $mA/cm^2$. Finally, the impact of Schottky barrier height inhomogeneity at the $Pt/WSe_2$ contact is investigated as a source of open circuit voltage lowering in these devices

physics.app-ph↗

arXiv2020

Deep-Learning-Enabled Fast Optical Identification and Characterization of Two-Dimensional Materials

Advanced microscopy and/or spectroscopy tools play indispensable role in nanoscience and nanotechnology research, as it provides rich information about the growth mechanism, chemical compositions, crystallography, and other important physical and chemical properties. However, the interpretation of imaging data heavily relies on the "intuition" of experienced researchers. As a result, many of the deep graphical features obtained through these tools are often unused because of difficulties in processing the data and finding the correlations. Such challenges can be well addressed by deep learning. In this work, we use the optical characterization of two-dimensional (2D) materials as a case study, and demonstrate a neural-network-based algorithm for the material and thickness identification of exfoliated 2D materials with high prediction accuracy and real-time processing capability. Further analysis shows that the trained network can extract deep graphical features such as contrast, color, edges, shapes, segment sizes and their distributions, based on which we develop an ensemble approach topredict the most relevant physical properties of 2D materials. Finally, a transfer learning technique is applied to adapt the pretrained network to other applications such as identifying layer numbers of a new 2D material, or materials produced by a different synthetic approach. Our artificial-intelligence-based material characterization approach is a powerful tool that would speed up the preparation, initial characterization of 2D materials and other nanomaterials and potentially accelerate new material discoveries.

cond-mat.mtrl-sci↗

arXiv2019

Evidence for a pressure-induced phase transition of few-layer graphene to 2D diamond

We unveil the diamondization mechanism of few-layer graphene compressed in the presence of water, providing robust evidence for the pressure-induced formation of 2D diamond. High-pressure Raman spectroscopy provides evidence of a phase transition occurring in the range of 4-7 GPa for 5-layer graphene and graphite. The pressure-induced phase is partially transparent and indents the silicon substrate. Our combined theoretical and experimental results indicate a gradual top-bottom diamondization mechanism, consistent with the formation of diamondene, a 2D ferromagnetic semiconductor. High-pressure x-ray diffraction on graphene indicates the formation of hexagonal diamond, consistent with the bulk limit of eclipsed-conformed diamondene.

cond-mat.mtrl-sci↗

arXiv2019

Realization of 2D Crystalline Metal Nitrides via Selective Atomic Substitution

Two-dimensional (2D) transition metal nitrides (TMNs) are new members in the 2D materials family with a wide range of applications. Particularly, highly crystalline and large area thin films of TMNs are potentially promising for applications in electronic and optoelectronic devices; however, the synthesis of such TMNs has not yet been achieved. Here, we report the synthesis of few-nanometer thin Mo5N6 crystals with large area and high quality via in situ chemical conversion of layered MoS2 crystals. The structure and quality of the ultrathin Mo5N6 crystal are confirmed using transmission electron microscopy, Raman spectroscopy and X-ray photoelectron spectroscopy. The large lateral dimensions of Mo5N6 crystals are inherited from the MoS2 crystals that are used for the conversion. Atomic force microscopy characterization reveals the thickness of Mo5N6 crystals is reduced to about 1/3 of the MoS2 crystal. Electrical measurements show the obtained Mo5N6 samples are metallic with high electrical conductivity (~ 100 Ω sq-1), which is comparable to graphene. The versatility of this general approach is demonstrated by expanding the method to synthesize W5N6 and TiN. Our strategy offers a new direction for preparing 2D TMNs with desirable characteristics, opening a door for studying fundamental physics and facilitating the development of next generation electronics.

cond-mat.mtrl-sci↗

arXiv2018

Giant intrinsic photoresponse in pristine graphene

When the Fermi level matches the Dirac point in graphene, the reduced charge screening can dramatically enhance electron-electron (e-e) scattering to produce a strongly interacting Dirac liquid. While the dominance of e-e scattering already leads to novel behaviors, such as electron hydrodynamic flow, further exotic phenomena have been predicted to arise specifically from the unique kinematics of e-e scattering in massless Dirac systems. Here, we use optoelectronic probes, which are highly sensitive to the kinematics of electron scattering, to uncover a giant intrinsic photocurrent response in pristine graphene. This photocurrent emerges exclusively at the charge neutrality point and vanishes abruptly at non-zero charge densities. Moreover, it is observed at places with broken reflection symmetry, and it is selectively enhanced at free graphene edges with sharp bends. Our findings reveal that the photocurrent relaxation is strongly suppressed by a drastic change of fast photocarrier kinematics in graphene when its Fermi level matches the Dirac point. The emergence of robust photocurrents in neutral Dirac materials promises new energy-harvesting functionalities and highlights intriguing electron dynamics in the optoelectronic response of Dirac fluids.

cond-mat.mes-hall↗

arXiv2018

Impact of 2D-Graphene on SiN Passivated AlGaN/GaN MIS-HEMTs under Mist Exposure

The effect of a two dimensional (2D) graphene layer (GL) on top of the silicon nitride (SiN) passivation layer of AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistors (MIS-HEMTs) has been systematically analyzed. Results showed that in the devices without the GL, the maximum drain current density (I_D,max) and the maximum transconductance (g_m,max) decreased gradually as the mist exposure time increased, up to 23% and 10%, respectively. Moreover, the gate lag ratio (GLR) increased around 10% during mist exposure. In contrast, devices with a GL showed a robust behavior and not significant changes in the electrical characteristics in both DC and pulsed conditions. The origin of these behaviors has been discussed and the results pointed to the GL as the key factor for improving the moisture resistance of the SiN passivation layer.

physics.app-ph↗

arXiv2017

Direct optical detection of Weyl fermion chirality in a topological semimetal

A Weyl semimetal (WSM) is a novel topological phase of matter, in which Weyl fermions (WFs) arise as pseudo-magnetic monopoles in its momentum space. The chirality of the WFs, given by the sign of the monopole charge, is central to the Weyl physics, since it directly serves as the sign of the topological number and gives rise to exotic properties such as Fermi arcs and the chiral anomaly. Despite being the defining property of a WSM, the chirality of the WFs has never been experimentally measured. Here, we directly detect the chirality of the WFs by measuring the photocurrent in response to circularly polarized mid-infrared light. The resulting photocurrent is determined by both the chirality of WFs and that of the photons. Our results pave the way for realizing a wide range of theoretical proposals for studying and controlling the WFs and their associated quantum anomalies by optical and electrical means. More broadly, the two chiralities, analogous to the two valleys in 2D materials, lead to a new degree of freedom in a 3D crystal with potential novel pathways to store and carry information.

cond-mat.mtrl-sci↗

arXiv2016

Bright Room-Temperature Single Photon Emission from Defects in Gallium Nitride

Single photon emitters play a central role in many photonic quantum technologies. A promising class of single photon emitters consists of atomic color centers in wide-bandgap crystals, such as diamond silicon carbide and hexagonal boron nitride. However, it is currently not possible to grow these materials as sub-micron thick films on low-refractive index substrates, which is necessary for mature photonic integrated circuit technologies. Hence, there is great interest in identifying quantum emitters in technologically mature semiconductors that are compatible with suitable heteroepitaxies. Here, we demonstrate robust single photon emitters based on defects in gallium nitride (GaN), the most established and well understood semiconductor that can emit light over the entire visible spectrum. We show that the emitters have excellent photophysical properties including a brightness in excess of 500x10^3 counts/s. We further show that the emitters can be found in a variety of GaN wafers, thus offering reliable and scalable platform for further technological development. We propose a theoretical model to explain the origin of these emitters based on cubic inclusions in hexagonal gallium nitride. Our results constitute a feasible path to scalable, integrated on-chip quantum technologies based on GaN.

cond-mat.mtrl-sci↗

arXiv2015

Parallel Stitching of Two-Dimensional Materials

Diverse parallel stitched two-dimensional heterostructures are synthesized, including metal-semiconductor (graphene-MoS2), semiconductor-semiconductor (WS2-MoS2), and insulator-semiconductor (hBN-MoS2), directly through selective sowing of aromatic molecules as the seeds in chemical vapor deposition (CVD) method. Our methodology enables the large-scale fabrication of lateral heterostructures with arbitrary patterns, and clean and precisely aligned interfaces, which offers tremendous potential for its application in integrated circuits.

cond-mat.mtrl-sci↗