arXiv subjects

Tommaso Lunghi

Publications and source records attributed to Tommaso Lunghi.

At least 19 recordsLinked to original sources

arXiv2021

Supermode-based second harmonic generation in a nonlinear interferometer

We demonstrate supermode-based second harmonic generation in an integrated nonlinear interferometer made of linear and nonlinear directional couplers. We use a fully-fibered pump shaper to demonstrate second harmonic generation pumped by the symmetric or anti-symmetric fundamental spatial modes. The selection of the pumping mode and thus of a specific SHG spectral profile is achieved through the selection of the fundamental wavelength and via a robust phase setting scheme. We use two methods: either post-selecting or actively setting the pumping mode. Such a modal phase matching paves the way for classical and quantum applications of coupled nonlinear photonic circuits, where multimode excitation, encoding and detection are a route for multiplexing and scaling up light-processing.

physics.optics↗

arXiv2020

Configurable heralded two-photon Fock-states on a chip

Progress in integrated photonics enables combining several elementary functions on single substrates for realizing advanced functionnalized chips. We report a monolithic integrated quantum photonic realization on lithium niobate, where nonlinear optics and electro-optics properties have been harnessed simultaneously for generating heralded configurable, two-photon states. Taking advantage of a picosecond pump laser and telecom components, we demonstrate the production of various path-coded heralded two-photon states, showing 94\% raw visibility for Hong-Ou-Mandel interference. The versatility and performance of such a highly integrated photonic entanglement source enable exploring more complex quantum information processing protocols finding application in communication, metrology and processing tasks.

quant-ph↗

arXiv2020

Photorefractive effect in LiNbO$_3$-based integrated-optical circuits for continuous variable experiments

We investigate the impact of photorefractive effect on lithium niobate integrated quantum photonic circuits dedicated to continuous variable on-chip experiments. The circuit main building blocks, i.e. cavities, directional couplers, and periodically poled nonlinear waveguides are studied. This work demonstrates that, even when the effect of photorefractivity is weaker than spatial mode hopping, they might compromise the success of on-chip quantum photonics experiments. We describe in detail the characterization methods leading to the identification of this possible issue. We also study to which extent device heating represents a viable solution to counter this effect. We focus on photorefractive effect induced by light at 775 nm, in the context of the generation of non-classical light at 1550 nm telecom wavelength.

quant-ph↗

arXiv2019

Chip-based squeezing at a telecom wavelength

We demonstrate a squeezing experiment exploiting the association of integrated optics and telecom technology as key features for compact, stable, and practical continuous variable quantum optics. In our setup, squeezed light is generated by single pass spontaneous parametric down conversion on a lithium niobate photonic circuit and detected by an homodyne detector whose interferometric part is directly integrated on the same platform. The remaining parts of the experiment are implemented using commercial plug-and-play devices based on guided-wave technologies. We measure, for a CW pump power of 40\,mW, a squeezing level of $-2.00\pm0.05$\,dB, (antisqueezing $+2.80\pm0.05$\,dB) thus confirming the validity of our approach and opening the way toward miniaturized and easy-to-handle continuous variable based quantum systems.

quant-ph↗

arXiv2018

Broadband integrated beam splitter using spatial adiabatic passage

Light routing and manipulation are important aspects of integrated optics. They essentially rely on beam splitters which are at the heart of interferometric setups and active routing. The most common implementations of beam splitters suffer either from strong dispersive response (directional couplers) or tight fabrication tolerances (multimode interference couplers). In this paper we fabricate a robust and simple broadband integrated beam splitter based on lithium niobate with a splitting ratio achromatic over more than 130 nm. Our architecture is based on spatial adiabatic passage, a technique originally used to transfer entirely an optical beam from a waveguide to another one that has been shown to be remarkably robust against fabrication imperfections and wavelength dispersion. Our device shows a splitting ratio of 0.52$\pm $0.03 and 0.48$\pm $0.03 from 1500\,nm up to 1630\,nm. Furthermore, we show that suitable design enables the splitting in output beams with relative phase 0 or $π$. Thanks to their independence to material dispersion, these devices represent simple, elementary components to create achromatic and versatile photonic circuits.

quant-ph↗

arXiv2017

Fully guided-wave photon pair source for quantum applications

We report a fully guided-wave source of polarisation entangled photons based on a periodically poled lithium niobate waveguide mounted in a Sagnac interferometer. We demonstrate the source's quality by converting polarisation entanglement to postselection-free energy-time entanglement for which we obtain a near-optimal $S$-parameter of $2.75 \pm 0.02$, i.e. a violation of the Bell inequality by more than 35 standard deviations. The exclusive use of guided-wave components makes our source compact and stable which is a prerequisite for increasingly complex quantum applications. Additionally, our source offers a great versatility in terms of photon pair emission spectrum and generated quantum state, making it suitable for a broad range of quantum applications such as cryptography and metrology. In this sense, we show how to use our source for chromatic dispersion measurements in optical fibres which opens new avenues in the field of quantum metrology.

quant-ph↗

arXiv2017

High-quality photonic entanglement for wavelength-multiplexed quantum communication based on a silicon chip

We report an efficient energy-time entangled photon-pair source based on four-wave mixing in a CMOS-compatible silicon photonics ring resonator. Thanks to suitable optimization, the source shows a large spectral brightness of 400\,pairs of entangled photons /s/MHz for $\rm 500\,μW$ pump power. Additionally, the resonator has been engineered so as to generate a frequency comb structure compatible with standard telecom dense wavelength division multiplexers. We demonstrate high-purity energy-time entanglement, i.e., free of photonic noise, with near perfect raw visibilities ($>$~98\%) between various channel pairs in the telecom C-band. Such a compact source stands as a path towards more complex quantum photonic circuits dedicated to quantum communication systems.

quant-ph↗

arXiv2016

On-chip generation of heralded photon-number states

Beyond the use of genuine monolithic integrated optical platforms, we report here a hybrid strategy enabling on-chip generation of configurable heralded two-photon states. More specifically, we combine two different fabrication techniques, \textit{i.e.}, non-linear waveguides on lithium niobate for efficient photon-pair generation and femtosecond-laser-direct-written waveguides on glass for photon manipulation. Through real-time device manipulation capabilities, a variety of path-coded heralded two-photon states can be produced, ranging from product to entangled states. Those states are engineered with high levels of purity, assessed by fidelities of 99.5$\pm$8\% and 95.0$\pm$8\%, respectively, obtained via quantum interferometric measurements. Our strategy therefore stands as a milestone for further exploiting entanglement-based protocols, relying on engineered quantum states, and enabled by scalable and compatible photonic circuits.

quant-ph↗

arXiv2016

Quantum photonics at telecom wavelengths based on lithium niobate waveguides

Integrated optical components on lithium niobate play a major role in standard high-speed communication systems. Over the last two decades, after the birth and positioning of quantum information science, lithium niobate waveguide architectures have emerged as one of the key platforms for enabling photonics quantum technologies. Due to mature technological processes for waveguide structure integration, as well as inherent and efficient properties for nonlinear optical effects, lithium niobate devices are nowadays at the heart of many photon-pair or triplet sources, single-photon detectors, coherent wavelength-conversion interfaces, and quantum memories. Consequently, they find applications in advanced and complex quantum communication systems, where compactness, stability, efficiency, and interconnectability with other guided-wave technologies are required. In this review paper, we first introduce the material aspects of lithium niobate, and subsequently discuss all of the above mentioned quantum components, ranging from standard photon-pair sources to more complex and advanced circuits.

quant-ph↗

arXiv2016

Optimal analysis of ultra broadband energy-time entanglement for high bit-rate dense wavelength division multiplexed quantum networks

We demonstrate an experimental method for measuring energy-time entanglement over almost 80 nm spectral bandwidth in a single shot with a quantum bit error rate below 0.5%. Our scheme is extremely cost-effective and efficient in terms of resources as it employs only one source of entangled photons and one fixed unbalanced interferometer per phase-coded analysis basis. We show that the maximum analysis spectral bandwidth is obtained when the analysis interferometers are properly unbalanced, a strategy which can be straightforwardly applied to most of today's experiments based on energy-time and time-bin entanglement. Our scheme has therefore a great potential for boosting bit rates and reducing the resource overhead of future entanglement-based quantum key distribution systems.

quant-ph↗

arXiv2016

Entanglement distribution over 150 km in wavelength division multiplexed channels for quantum cryptography

Granting information privacy is of crucial importance in our society, notably in fiber communication networks. Quantum cryptography provides a unique means to establish, at remote locations, identical strings of genuine random bits, with a level of secrecy unattainable using classical resources. However, several constraints, such as non-optimized photon number statistics and resources, detectors' noise, and optical losses, currently limit the performances in terms of both achievable secret key rates and distances. Here, these issues are addressed using an approach that combines both fundamental and off-the-shelves technological resources. High-quality bipartite photonic entanglement is distributed over a 150 km fiber link, exploiting a wavelength demultiplexing strategy implemented at the end-user locations. It is shown how coincidence rates scale linearly with the number of employed telecommunication channels, with values outperforming previous realizations by almost one order of magnitude. Thanks to its potential of scalability and compliance with device-independent strategies, this system is ready for real quantum applications, notably entanglement-based quantum cryptography.

quant-ph↗

arXiv2016

A self-testing quantum random number generator

The generation of random numbers is a task of paramount importance in modern science. A central problem for both classical and quantum randomness generation is to estimate the entropy of the data generated by a given device. Here we present a protocol for self-testing quantum random number generation, in which the user can monitor the entropy in real-time. Based on a few general assumptions, our protocol guarantees continuous generation of high quality randomness, without the need for a detailed characterization of the devices. Using a fully optical setup, we implement our protocol and illustrate its self-testing capacity. Our work thus provides a practical approach to quantum randomness generation in a scenario of trusted but error-prone devices.

quant-ph↗

arXiv2015

Practical relativistic bit commitment

Bit commitment is a fundamental cryptographic primitive in which Alice wishes to commit a secret bit to Bob. Perfectly secure bit commitment between two mistrustful parties is impossible through asynchronous exchange of quantum information. Perfect security is however possible when Alice and Bob each split into several agents exchanging classical information at times and locations suitably chosen to satisfy specific relativistic constraints. In this Letter we first revisit a previously proposed scheme that realizes bit commitment using only classical communication. We prove that the protocol is secure against quantum adversaries for a duration limited by the light-speed communication time between the locations of the agents. We then propose a novel multi-round scheme based on finite-field arithmetic that extends the commitment time beyond this limit, and we prove its security against classical attacks. Finally, we present an implementation of these protocols using dedicated hardware and we show how it could be used to realize commitments of duration ranging up to 212 milliseconds by agents occupying antipodal locations on the Earth.

quant-ph↗

arXiv2014

Free-running InGaAs single photon detector with 1 dark count per second at 10% efficiency

We present a free-running single photon detector for telecom wavelengths based on a negative feedback avalanche photodiode (NFAD). A dark count rate as low as 1 cps was obtained at a detection efficiency of 10%, with an afterpulse probability of 2.2% for 20 μs of deadtime. This was achieved by using an active hold-off circuit and cooling the NFAD with a free-piston stirling cooler down to temperatures of -110${^o}$C. We integrated two detectors into a practical, 625 MHz clocked quantum key distribution system. Stable, real-time key distribution in presence of 30 dB channel loss was possible, yielding a secret key rate of 350 bps.

quant-ph↗

arXiv2014

Afterpulsing studies of low noise InGaAs/InP single-photon negative feedback avalanche diodes

We characterize the temporal evolution of the afterpulse probability in a free-running negative feedback avalanche diode (NFAD) over an extended range, from $\sim$300 ns to $\sim$1 ms. This is possible thanks to an extremely low dark count rate on the order of 1 cps at 10% efficiency, achieved by operating the NFAD at a temperatures as low as 143 K. Experimental results in a large range of operating temperatures (223-143 K) are compared with a legacy afterpulsing model based on multiple trap families at discrete energy levels, which is found to be lacking in physical completeness. Subsequently, we expand on a recent proposal which considers a continuous spectrum of traps by introducing well defined edges to the spectrum, which are experimentally observed.

physics.ins-det↗

arXiv2014

Absolute calibration of fiber-coupled single-photon detector

We show a setup for characterising the efficiency of a single-photon-detector absolutely and with a precision better of 1%. Since the setup does not rely on calibrated devices and can be implemented with standard-optic components, it can be realised in any laboratory. Our approach is based on an Erbium-Doped-Fiber-Amplifier (EDFA) radiometer as a primary measurement standard for optical power, and on an ultra-stable source of spontaneous emission. As a proof of principle, we characterise the efficiency of an InGaAs/InP single-photon detector. We verified the correctness of the characterisation with independent measurements. In particular, the measurement of the optical power made with the EDFA radiometer has been compared to that of the Swiss Federal Office of Metrology using a transfer power meter. Our approach is suitable for frequent characterisations of high-efficient single-photon detectors.

physics.ins-det↗

arXiv2013

A fast and versatile QKD system with hardware key distillation and wavelength multiplexing

We present a 625 MHz clocked coherent one-way quantum key distribution (QKD) system which continuously distributes secret keys over an optical fibre link. To support high secret key rates, we implemented a fast hardware key distillation engine which allows for key distillation rates up to 4 Mbps in real time. The system employs wavelength multiplexing in order to run over only a single optical fibre and is compactly integrated in 19-inch 2U racks. We optimized the system considering a security analysis that respects finite-key-size effects, authentication costs, and system errors. Using fast gated InGaAs single photon detectors, we reliably distribute secret keys with rates up to 140 kbps and over 25 km of optical fibre, for a security parameter of 4E-9.

quant-ph↗

arXiv2012

Sine gating detector with simple filtering for low-noise infra-red single photon detection at room temperature

We present and analyze a gated single photon avalanche detector using a sine gating scheme with a simple but effective low-pass filtering technique for fast low-noise single photon detection at telecom wavelength. The detector is characterized by 130 ps short gates applied with a frequency of 1.25 GHz, yields only 70 ps timing jitter and noise probabilities as low as 7E-7 per gate at 10% detection efficiency. We show that the detector is suitable for high rate quantum key distribution (QKD) and even at room temperature it could allow for QKD over distances larger than 25 km.

quant-ph↗