arXiv subjects

Tonio Buonassisi

Publications and source records attributed to Tonio Buonassisi.

At least 37 records · Page 2Linked to original sources

arXiv2022

Introducing flexible perovskites to the IoT world using photovoltaic-powered wireless tags

Billions of everyday objects could become part of the Internet of Things (IoT) by augmentation with low-cost, long-range, maintenance-free wireless sensors. Radio Frequency Identification (RFID) is a low-cost wireless technology that could enable this vision, but it is constrained by short communication range and lack of sufficient energy available to power auxiliary electronics and sensors. Here, we explore the use of flexible perovskite photovoltaic cells to provide external power to semi-passive RFID tags to increase range and energy availability for external electronics such as microcontrollers and digital sensors. Perovskites are intriguing materials that hold the possibility to develop high-performance, low-cost, optically tunable (to absorb different light spectra), and flexible light energy harvesters. Our prototype perovskite photovoltaic cells on plastic substrates have an efficiency of 13% and a voltage of 0.88 V at maximum power under standard testing conditions. We built prototypes of RFID sensors powered with these flexible photovoltaic cells to demonstrate real-world applications. Our evaluation of the prototypes suggests that: i) flexible PV cells are durable up to a bending radius of 5 mm with only a 20 % drop in relative efficiency; ii) RFID communication range increased by 5x, and meets the energy needs (10-350 microwatt) to enable self-powered wireless sensors; iii) perovskite powered wireless sensors enable many battery-less sensing applications (e.g., perishable good monitoring, warehouse automation)

eess.SP↗

arXiv2022

What Information is Necessary and Sufficient to Predict Materials Properties using Machine Learning?

Conventional wisdom of materials modelling stipulates that both chemical composition and crystal structure are integral in the prediction of physical properties. However, recent developments challenge this by reporting accurate property-prediction machine learning (ML) frameworks using composition alone without knowledge of the local atomic environments or long-range order. To probe this behavior, we conduct a systematic comparison of supervised ML models built on composition only vs. composition plus structure features. Similar performance for property prediction is found using both models for compounds close to the thermodynamic convex hull. We hypothesize that composition embeds structural information of ground-state structures in support of composition-centric models for property prediction and inverse design of stable compounds.

cond-mat.mtrl-sci↗

arXiv2022

Processing Induced Distinct Charge Carrier Dynamics of Bulky Organic Halide Treated Perovskites

State-of-the-art metal halide perovskite-based photovoltaics often employ organic ammonium salts, AX, as a surface passivator, where A is a large organic cation and X is a halide. These surface treatments passivate the perovskite by forming layered perovskites (e.g., A2PbX4) or by AX itself serving as a surface passivation agent on the perovskite photoactive film. It remains unclear whether layered perovskites or AX is the ideal passivator due to an incomplete understanding of the interfacial impact and resulting photoexcited carrier dynamics of AX treatment. In the present study, we use TRPL measurements to selectively probe the different interfaces of glass/perovskite/AX to demonstrate the vastly distinct interfacial photoexcited state dynamics with the presence of A2PbX4 or AX. Coupling the TRPL results with X-ray diffraction and nanoscale microscopy measurements, we find that the presence of AX not only passivates the traps at the surface and the grain boundaries, but also induces an α/δ-FAPbI3 phase mixing that alters the carrier dynamics near the glass/perovskite interface and enhances the photoluminescence quantum yield. In contrast, the passivation with A2PbI4 is mostly localized to the surface and grain boundaries near the top surface where the availability of PbI2 directly determines the formation of A2PbI4. Such distinct mechanisms significantly impact the corresponding solar cell performance, and we find AX passivation that has not been converted to a layered perovskite allows for a much larger processing window (e.g., larger allowed variance of AX concentration which is critical for improving the eventual manufacturing yield) and more reproducible condition to realize device performance improvements, while A2PbI4 as a passivator yields a much narrower processing window. We expect these results to enable a more rational route for developing AX for perovskite.

cond-mat.mtrl-sci↗

arXiv2022

Machine Learning with Knowledge Constraints for Process Optimization of Open-Air Perovskite Solar Cell Manufacturing

Perovskite photovoltaics (PV) have achieved rapid development in the past decade in terms of power conversion efficiency of small-area lab-scale devices; however, successful commercialization still requires further development of low-cost, scalable, and high-throughput manufacturing techniques. One of the critical challenges of developing a new fabrication technique is the high-dimensional parameter space for optimization, but machine learning (ML) can readily be used to accelerate perovskite PV scaling. Herein, we present an ML-guided framework of sequential learning for manufacturing process optimization. We apply our methodology to the Rapid Spray Plasma Processing (RSPP) technique for perovskite thin films in ambient conditions. With a limited experimental budget of screening 100 process conditions, we demonstrated an efficiency improvement to 18.5% as the best-in-our-lab device fabricated by RSPP, and we also experimentally found 10 unique process conditions to produce the top-performing devices of more than 17% efficiency, which is 5 times higher rate of success than the control experiments with pseudo-random Latin hypercube sampling. Our model is enabled by three innovations: (a) flexible knowledge transfer between experimental processes by incorporating data from prior experimental data as a probabilistic constraint; (b) incorporation of both subjective human observations and ML insights when selecting next experiments; (c) adaptive strategy of locating the region of interest using Bayesian optimization first, and then conducting local exploration for high-efficiency devices. Furthermore, in virtual benchmarking, our framework achieves faster improvements with limited experimental budgets than traditional design-of-experiments methods (e.g., one-variable-at-a-time sampling).

cs.LG↗

arXiv2022

A Machine Learning and Computer Vision Approach to Rapidly Optimize Multiscale Droplet Generation

Generating droplets from a continuous stream of fluid requires precise tuning of a device to find optimized control parameter conditions. It is analytically intractable to compute the necessary control parameter values of a droplet-generating device that produces optimized droplets. Furthermore, as the length scale of the fluid flow changes, the formation physics and optimized conditions that induce flow decomposition into droplets also change. Hence, a single proportional integral derivative controller is too inflexible to optimize devices of different length scales or different control parameters, while classification machine learning techniques take days to train and require millions of droplet images. Therefore, the question is posed, can a single method be created that universally optimizes multiple length-scale droplets using only a few data points and is faster than previous approaches? In this paper, a Bayesian optimization and computer vision feedback loop is designed to quickly and reliably discover the control parameter values that generate optimized droplets within different length-scale devices. This method is demonstrated to converge on optimum parameter values using 60 images in only 2.3 hours, 30x faster than previous approaches. Model implementation is demonstrated for two different length-scale devices: a milliscale inkjet device and a microfluidics device.

cs.LG↗

arXiv2021

An invertible crystallographic representation for general inverse design of inorganic crystals with targeted properties

Realizing general inverse design could greatly accelerate the discovery of new materials with user-defined properties. However, state-of-the-art generative models tend to be limited to a specific composition or crystal structure. Herein, we present a framework capable of general inverse design (not limited to a given set of elements or crystal structures), featuring a generalized invertible representation that encodes crystals in both real and reciprocal space, and a property-structured latent space from a variational autoencoder (VAE). In three design cases, the framework generates 142 new crystals with user-defined formation energies, bandgap, thermoelectric (TE) power factor, and combinations thereof. These generated crystals, absent in the training database, are validated by first-principles calculations. The success rates (number of first-principles-validated target-satisfying crystals/number of designed crystals) ranges between 7.1% and 38.9%. These results represent a significant step toward property-driven general inverse design using generative models, although practical challenges remain when coupled with experimental synthesis.

physics.comp-ph↗

arXiv2021

Predicting antimicrobial activity of conjugated oligoelectrolyte molecules via machine learning

New antibiotics are needed to battle growing antibiotic resistance, but the development process from hit, to lead, and ultimately to a useful drug, takes decades. Although progress in molecular property prediction using machine-learning methods has opened up new pathways for aiding the antibiotics development process, many existing solutions rely on large datasets and finding structural similarities to existing antibiotics. Challenges remain in modelling of unconventional antibiotics classes that are drawing increasing research attention. In response, we developed an antimicrobial activity prediction model for conjugated oligoelectrolyte molecules, a new class of antibiotics that lacks extensive prior structure-activity relationship studies. Our approach enables us to predict minimum inhibitory concentration for E. coli K12, with 21 molecular descriptors selected by recursive elimination from a set of 5,305 descriptors. This predictive model achieves an R2 of 0.65 with no prior knowledge of the underlying mechanism. We find the molecular representation optimum for the domain is the key to good predictions of antimicrobial activity. In the case of conjugated oligoelectrolytes, a representation reflecting the 3-dimensional shape of the molecules is most critical. Although it is demonstrated with a specific example of conjugated oligoelectrolytes, our proposed approach for creating the predictive model can be readily adapted to other novel antibiotic candidate domains.

physics.app-ph↗

arXiv2021

Interpretable and Explainable Machine Learning for Materials Science and Chemistry

While the uptake of data-driven approaches for materials science and chemistry is at an exciting, early stage, to realise the true potential of machine learning models for successful scientific discovery, they must have qualities beyond purely predictive power. The predictions and inner workings of models should provide a certain degree of explainability by human experts, permitting the identification of potential model issues or limitations, building trust on model predictions and unveiling unexpected correlations that may lead to scientific insights. In this work, we summarize applications of interpretability and explainability techniques for materials science and chemistry and discuss how these techniques can improve the outcome of scientific studies. We discuss various challenges for interpretable machine learning in materials science and, more broadly, in scientific settings. In particular, we emphasize the risks of inferring causation or reaching generalization by purely interpreting machine learning models and the need of uncertainty estimates for model explanations. Finally, we showcase a number of exciting developments in other fields that could benefit interpretability in material science and chemistry problems.

cond-mat.mtrl-sci↗

arXiv2021

Opportunities for Machine Learning to Accelerate Halide Perovskite Commercialization and Scale-Up

While halide perovskites attract significant academic attention, examples of at-scale industrial production are still sparse. In this perspective, we review practical challenges hindering the commercialization of halide perovskites, and discuss how machine-learning (ML) tools could help: (1) active-learning algorithms that blend institutional knowledge and human expertise could help stabilize and rapidly update baseline manufacturing processes; (2) ML-powered metrology, including computer imaging, could help narrow the performance gap between large- and small-area devices; and (3) inference methods could help accelerate root-cause analysis by reconciling multiple data streams and simulations, focusing research effort on areas with highest probability for improvement. We conclude that to satisfy many of these challenges, incremental -- not radical -- adaptations of existing ML and statistical methods are needed. We identify resources to help develop in-house data-science talent, and propose how industry-academic partnerships could help adapt "ready-now" ML tools to specific industry needs, further improve process control by revealing underlying mechanisms, and develop "gamechanger" discovery-oriented algorithms to better navigate vast materials combination spaces and the literature.

cond-mat.mtrl-sci↗

arXiv2021

Accelerated automated screening of viscous graphene suspensions with various surfactants for optimal electrical conductivity

Functional composite thin films have a wide variety of applications in flexible and/or electronic devices, telecommunications and multifunctional emerging coatings. Rapid screening of their properties is a challenging task, especially with multiple components defining the targeted properties. In this work we present a manifold for accelerated automated screening of viscous graphene suspensions for optimal electrical conductivity. Using Opentrons OT2 robotic auto-pipettor, we tested 3 most industrially significant surfactants - PVP, SDS and T80 - by fabricating 288 samples of graphene suspensions in aqueous hydroxypropylmethylcellulose. Enabled by our custom motorized 4-point probe measurement setup and computer vision algorithms, we then measured electrical conductivity of every sample using custom and identified that the highest performance is achieved for PVP-based samples, peaking at 10.4 mS/cm. The automation of the experimental procedure allowed us to perform majority of the experiments using robots, while involvement of human researcher was kept to minimum. Overall the experiment was completed in less than 18 hours, only 3 of which involved humans.

physics.app-ph↗

arXiv2021

Discovering Equations that Govern Experimental Materials Stability under Environmental Stress using Scientific Machine Learning

While machine learning (ML) in experimental research has demonstrated impressive predictive capabilities, inductive reasoning and knowledge extraction remain elusive tasks, in part because of the difficulty extracting fungible knowledge representations from experimental data. In this manuscript, we use ML to infer the underlying dynamical differential equation (DE) from experimental data of degrading organic-inorganic methylammonium lead iodide (MAPI) perovskite thin films under environmental stressors (elevated temperature, humidity, and light). We apply a sparse regression algorithm that automatically identifies the differential equation describing the dynamics from time-series data. We find that the underlying DE governing MAPI degradation across a broad temperature range of 35 to 85°C is described minimally with three terms (specifically, a second-order polynomial), and not a simple single-order reaction (i.e. 0th, 1st, or 2nd-order reaction). We demonstrate how computer-derived results can aid the researcher to develop profound mechanistic insights. This DE corresponds to the Verhulst logistic function, which describes reaction kinetics analogous in functional form to autocatalytic or self-propagating reactions, suggesting future strategies to suppress MAPI degradation. We examine the robustness of our conclusions to experimental luck-of-the-draw variance and Gaussian noise using a combination of experiment and simulation, and describe the experimental limits within which this methodology can be applied. Our study demonstrates the application of scientific ML in experimental chemical and materials systems, highlighting the promise and challenges associated with ML-aided scientific discovery.

cond-mat.mtrl-sci↗

arXiv2021

Benchmarking the Performance of Bayesian Optimization across Multiple Experimental Materials Science Domains

In the field of machine learning (ML) for materials optimization, active learning algorithms, such as Bayesian Optimization (BO), have been leveraged for guiding autonomous and high-throughput experimentation systems. However, very few studies have evaluated the efficiency of BO as a general optimization algorithm across a broad range of experimental materials science domains. In this work, we evaluate the performance of BO algorithms with a collection of surrogate model and acquisition function pairs across five diverse experimental materials systems, namely carbon nanotube polymer blends, silver nanoparticles, lead-halide perovskites, as well as additively manufactured polymer structures and shapes. By defining acceleration and enhancement metrics for general materials optimization objectives, we find that for surrogate model selection, Gaussian Process (GP) with anisotropic kernels (automatic relevance detection, ARD) and Random Forests (RF) have comparable performance and both outperform the commonly used GP without ARD. We discuss the implicit distributional assumptions of RF and GP, and the benefits of using GP with anisotropic kernels in detail. We provide practical insights for experimentalists on surrogate model selection of BO during materials optimization campaigns.

cond-mat.mtrl-sci↗

arXiv2021

Online Preconditioning of Experimental Inkjet Hardware by Bayesian Optimization in Loop

High-performance semiconductor optoelectronics such as perovskites have high-dimensional and vast composition spaces that govern the performance properties of the material. To cost-effectively search these composition spaces, we utilize a high-throughput experimentation method of rapidly printing discrete droplets via inkjet deposition, in which each droplet is comprised of a unique permutation of semiconductor materials. However, inkjet printer systems are not optimized to run high-throughput experimentation on semiconductor materials. Thus, in this work, we develop a computer vision-driven Bayesian optimization framework for optimizing the deposited droplet structures from an inkjet printer such that it is tuned to perform high-throughput experimentation on semiconductor materials. The goal of this framework is to tune to the hardware conditions of the inkjet printer in the shortest amount of time using the fewest number of droplet samples such that we minimize the time and resources spent on setting the system up for material discovery applications. We demonstrate convergence on optimum inkjet hardware conditions in 10 minutes using Bayesian optimization of computer vision-scored droplet structures. We compare our Bayesian optimization results with stochastic gradient descent.

cs.CV↗

arXiv2020

Machine learning and high-throughput robust design of P3HT-CNT composite thin films for high electrical conductivity

Combining high-throughput experiments with machine learning allows quick optimization of parameter spaces towards achieving target properties. In this study, we demonstrate that machine learning, combined with multi-labeled datasets, can additionally be used for scientific understanding and hypothesis testing. We introduce an automated flow system with high-throughput drop-casting for thin film preparation, followed by fast characterization of optical and electrical properties, with the capability to complete one cycle of learning of fully labeled ~160 samples in a single day. We combine regio-regular poly-3-hexylthiophene with various carbon nanotubes to achieve electrical conductivities as high as 1200 S/cm. Interestingly, a non-intuitive local optimum emerges when 10% of double-walled carbon nanotubes are added with long single wall carbon nanotubes, where the conductivity is seen to be as high as 700 S/cm, which we subsequently explain with high fidelity optical characterization. Employing dataset resampling strategies and graph-based regressions allows us to account for experimental cost and uncertainty estimation of correlated multi-outputs, and supports the proving of the hypothesis linking charge delocalization to electrical conductivity. We therefore present a robust machine-learning driven high-throughput experimental scheme that can be applied to optimize and understand properties of composites, or hybrid organic-inorganic materials.

physics.app-ph↗

arXiv2020

A robust low data solution: dimension prediction of semiconductor nanorods

Precise control over dimension of nanocrystals is critical to tune the properties for various applications. However, the traditional control through experimental optimization is slow, tedious and time consuming. Herein a robust deep neural network-based regression algorithm has been developed for precise prediction of length, width, and aspect ratios of semiconductor nanorods (NRs). Given there is limited experimental data available (28 samples), a Synthetic Minority Oversampling Technique for regression (SMOTE-REG) has been employed for the first time for data generation. Deep neural network is further applied to develop regression model which demonstrated the well performed prediction on both the original and generated data with a similar distribution. The prediction model is further validated with additional experimental data, showing accurate prediction results. Additionally, Local Interpretable Model-Agnostic Explanations (LIME) is used to interpret the weight for each variable, which corresponds to its importance towards the target dimension, which is approved to be well correlated well with experimental observations.

cs.LG↗

arXiv2020

Bridging the gap between photovoltaics R&D and manufacturing with data-driven optimization

Novel photovoltaics, such as perovskites and perovskite-inspired materials, have shown great promise due to high efficiency and potentially low manufacturing cost. So far, solar cell R&D has mostly focused on achieving record efficiencies, a process that often results in small batches, large variance, and limited understanding of the physical causes of underperformance. This approach is intensive in time and resources, and ignores many relevant factors for industrial production, particularly the need for high reproducibility and high manufacturing yield, and the accompanying need of physical insights. The record-efficiency paradigm is effective in early-stage R&D, but becomes unsuitable for industrial translation, requiring a repetition of the optimization procedure in the industrial setting. This mismatch between optimization objectives, combined with the complexity of physical root-cause analysis, contributes to decade-long timelines to transfer new technologies into the market. Based on recent machine learning and technoeconomic advances, our perspective articulates a data-driven optimization framework to bridge R&D and manufacturing optimization approaches. We extend the maximum-efficiency optimization paradigm by considering two additional dimensions: a technoeconomic figure of merit and scalable physical inference. Our framework naturally aligns different stages of technology development with shared optimization objectives, and accelerates the optimization process by providing physical insights.

physics.app-ph↗

arXiv2020

Techno-economic model of a second-life energy storage system for utility-scale solar power considering li-ion calendar and cycle aging

While the use of energy storage combined with grid-scale photovoltaic power plants continues to grow, given current lithium-ion battery prices, there remains uncertainty about the profitability of these solar-plus-storage projects. At the same time, the rapid proliferation of electric vehicles is creating a fleet of millions of lithium-ion batteries that will be deemed unsuitable for the transportation industry once they reach 80 percent of their original capacity. The repurposing and deployment of these batteries as stationary energy storage provides an opportunity to reduce the cost of solar-plus-storage systems, if the economics can be proven. We present a techno-economic model of a solar-plus-second-life energy storage project in California, including a data-based model of lithium nickel manganese cobalt oxide battery degradation, to predict its capacity fade over time, and compare it to a project that uses a new lithium-ion battery. By setting certain control policy limits, to minimize cycle aging, we show that a system with SOC limits in a 65 to 15 percent range, extends the project life to over 16 years, assuming a battery reaches its end-of-life at 60 percent of its original capacity. Under these conditions, a second-life project is more economically favorable than a project that uses a new battery and 85 to 20 percent SOC limits, for second-life battery costs that are less than 80 percent of the new battery. The same system reaches break-even and profitability for second-life battery costs that are less than 60 percent of the new battery. Our model shows that using current benchmarked data for the capital and O&M costs of solar-plus-storage systems, and a semi-empirical data-based degradation model, it is possible for EV manufacturers to sell second-life batteries for less than 60 percent of their original price to developers of profitable solar-plus-storage projects.

physics.soc-ph↗

arXiv2019

How much physics is in a current-voltage curve? Inferring defect properties from photovoltaic device measurements

Defect-assisted recombination processes are critical to understand, as they frequently limit photovoltaic (PV) device performance. However, the physical parameters governing these processes can be extremely challenging to measure, requiring specialized techniques and sample preparation. And yet the fact that they limit performance as measured by current-voltage (JV) characterization indicates that they must have some detectable signal in that measurement. In this work, we use numerical device models that explicitly account for these parameters with high-throughput JV measurements and Bayesian inference to construct probability distributions over recombination parameters, showing the ability to recover values consistent with previously-reported literature measurements. The Bayesian approach enables easy incorporation of data and models from other sources; we demonstrate this with temperature dependence of carrier capture cross-sections. The ability to extract these fundamental physical parameters from standardized, automated measurements on completed devices is promising for both established industrial PV technologies and newer research-stage ones.

physics.app-ph↗