arXiv subjects

Tristan Pinsonneault-Marotte

Publications and source records attributed to Tristan Pinsonneault-Marotte.

At least 19 recordsLinked to original sources

arXiv2026

The Simons Observatory: Design and Initial Performance of the Detector Readout System for the Large-Aperture Telescope

We present the design, implementation, and initial performance of a highly multiplexed cryogenic superconducting detector readout system in the context of its deployment to the Simons Observatory large-aperture telescope (LAT). The Simons Observatory is a cosmic microwave background experiment located at 5,200 m in Chile's Atacama Desert. In addition to its 6 m LAT, whose broad range of science goals spans probing large-scale structure to searching for new Solar System objects, the observatory also currently includes three 0.42 m small-aperture telescopes, which search for signatures of primordial gravitational waves. Nearly 100,000 optically-coupled transition-edge sensor bolometers have been deployed across the observatory's four telescopes to enable these science goals. The readout systems for these telescopes use microwave frequency multiplexing to simultaneously read out 860 optically-coupled bolometers per transmission line. This is enabled by the large-scale fabrication of multiplexing chips which house radio-frequency superconducting quantum interference devices for each detector, and the development of room-temperature electronics to read out these bolometers. This has enabled the largest deployment of superconducting sensors for astronomical observations to date. This paper focuses on the design and implementation of the readout system for the 63,000 detectors in the LAT's cryogenic receiver. We present performance results from an early phase in the telescope's operation. We show that the readout system's performance enables the instrument to meet key benchmarks, including successful readout of 81.4% of its optically-coupled bolometers, which exceeds projections, and readout noise-equivalent current consistent with pre-deployment specifications.

astro-ph.IM↗

arXiv2026

The Simons Observatory: Commissioning of the Mid-Frequency Small Aperture Telescopes

The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO Small Aperture Telescopes (SATs) will cover six spectral bands between 30 and 280 GHz primarily to search for evidence of primordial gravitational waves in the large angular scale $B$-modes of the CMB polarization. The first two Mid-Frequency (MF) SATs, operating in the 90 and 150 GHz frequency bands, began commissioning observations in late 2023, and we present the results of those observations here. Each MF SAT operates with approximately 9,400 biased transition-edge sensors (TES) at 1 mm of precipitable water vapor (PWV), representing a typical 80% yield. Planet observations confirm the telescope optics performance, calibrate the instrument response, and measure the end-to-end optical efficiency of the SATs. The realized instrument efficiencies are within the range expected based on instrument model predictions. In nominal observing conditions, the noise equivalent temperatures from both telescopes combined are $2.4~\mathrm{μK_{CMB}\sqrt{s}}$ at 90 GHz and $3.2~\mathrm{μK_{CMB}\sqrt{s}}$ at 150 GHz, substantially outperforming the baseline instantaneous sensitivity targets for the observatory.

astro-ph.IM↗

arXiv2026

Detection of the Cosmological 21 cm Signal in Auto-correlation at z ~ 1 with the Canadian Hydrogen Intensity Mapping Experiment

We present the first detection of the cosmological 21 cm intensity mapping signal in auto-correlation at z ~ 1 with the Canadian Hydrogen Intensity Mapping Experiment (CHIME). Using 94 nights of observation, we have measured the 21 cm auto-power spectrum over a frequency range from 608.2 MHz to 707.8 MHz (z = 1.34 to 1.01) at 0.4 h Mpc^-1 < k < 1.5 h Mpc^-1, with a detection significance of 12.5 sigma. Our analysis employs significant improvements to the CHIME data processing pipeline compared to previous work, including novel radio frequency interference (RFI) detection and masking algorithms, achromatic beamforming techniques, and foreground filtering before time averaging to minimize spectral leakage. We establish the robustness and reliability of our detection through a comprehensive suite of validation tests. We also measure the 21 cm signal in two independent sub-bands centered at z ~ 1.08 and z ~ 1.24 with detection significance of 8.7 sigma and 9.2 sigma, respectively. We briefly discuss the theoretical interpretation of these measurements in terms of a power spectrum model, deferring the details to a companion paper. This auto-power spectrum detection demonstrates CHIME's capability to probe large-scale structure through 21 cm intensity mapping without reliance on external galaxy surveys.

astro-ph.CO↗

arXiv2026

Interpretation of 21 cm Auto Power Spectrum Measurement at $z\sim 1$ by the Canadian Hydrogen Intensity Mapping Experiment

Observations with the Canadian Hydrogen Intensity Mapping Experiment (CHIME) have been used to measure the 21 cm intensity mapping auto power spectrum, at $z\sim 1$, over a frequency range from 608.2 MHz to 707.8 MHz at wavenumbers $0.4~h~{\rm Mpc}^{-1} \lesssim k \lesssim 1.5~h~{\rm Mpc}^{-1}$. In this paper, we present the results of two different approaches to interpreting this measurement. In the first approach, we use a parametric power spectrum model to constrain an amplitude parameter, defined as $\mathcal{A}^2_{\rm HI} \equiv 10^6 Ω_{\rm HI}^2(b^2_{\rm HI}+\langle f μ^2\rangle)^2$, where $Ω_{\rm HI}$ is the cosmological density parameter for atomic hydrogen ($\rm HI$), $b_{\rm HI}$ is the linear bias for $\rm HI$, and $\langle f μ^2\rangle$ incorporates the dominant large-scale impact of redshift-space distortions on the angle-averaged power spectrum. Imposing an additional prior on either $Ω_{\rm HI}$ or $b_{\rm HI}$, based on values in the literature, allows us to break the pairwise degeneracy between those two parameters. In the second approach, we compare CHIME's measurement with predictions for the power spectrum of $\rm HI$ from the IllustrisTNG simulations, finding that the measurement disagrees with the TNG100 run at $3.1σ$ and the TNG300 run at $4.0σ$. This disagreement is most likely attributable to the strength of nonlinear redshift-space clustering of $\rm HI$ in the simulations, rather than the total abundance of $\rm HI$, and invites further investigation of the physical processes in the simulations that determine the behavior of $\rm HI$ at nonlinear scales. These results exemplify the ability of 21 cm intensity mapping to provide astrophysical information using measurements at nonlinear scales.

astro-ph.CO↗

arXiv2026

Discovery of a 21 cm absorption system at z=2.327 with CHIME

We report the detection of a new 21 cm absorption system associated with the radio source NVSS J164725+375218 at a redshift of z=2.327, identified through a pilot survey conducted by the Canadian Hydrogen Intensity Mapping Experiment (CHIME). This is the fifth detection of an associated system at z > 2. By analyzing a subset of available data, we conduct a spectrally blind survey for 21 cm absorption systems within the redshift range of 0.78 to 2.55 along 202 lines of sight toward known sources in the declination range of 35 to 60 degrees. We detect three 21 cm absorbers: two previously known intervening systems and one newly discovered associated system. By fitting the absorption profiles with models containing one to three Gaussian components and selecting the best model using the Bayesian information criterion, we estimate the optical depth, velocity-integrated optical depth, and the ratio between the HI column density and the spin temperature of the absorption systems. These results demonstrate CHIME's ability to discover new absorbers, even in a small subset of its full dataset.

astro-ph.GA↗

arXiv2026

The Squeezed Bispectrum from CHIME HI Emission and Planck CMB Lensing: Current Sensitivity and Forecasts

Line intensity mapping using atomic hydrogen (HI) has the potential to efficiently map large volumes of the universe if the signal can be successfully separated from overwhelmingly bright radio foreground emission. This motivates cross-correlations, to ascertain the cosmological nature of measured HI fluctuations, and to study their connections with galaxies and the underlying matter density field. However, these same foregrounds render the cross-correlation with projected fields such as the lensing of the cosmic microwave background (CMB) difficult. Indeed, the correlated Fourier modes vary slowly along the line of sight, and are thus most contaminated by the smooth-spectrum radio continuum foregrounds. In this paper, we implement a method that avoids this issue by attempting to measure the non-linear gravitational coupling of the small-scale 21cm power from the Canadian Hydrogen Intensity Mapping Experiment (CHIME) with large-scale Planck CMB lensing. This measurement is a position-dependent power spectrum, i.e. a squeezed integrated bispectrum. Using 94 nights of CHIME data between $1.0 < z < 1.3$ and aggressive foreground filtering, we find that the expected signal is five times smaller than the current noise. We forecast that incorporating the additional nights of CHIME data already collected would enable a signal-to-noise ratio of 3, without any further improvements in filtering for foreground cleaning.

astro-ph.CO↗

arXiv2025

Beam Maps of the Canadian Hydrogen Intensity Mapping Experiment (CHIME) Measured with a Drone

We present beam measurements of the CHIME telescope using a radio calibration source deployed on a drone payload. During test flights, the pulsing calibration source and the telescope were synchronized to GPS time, enabling in-situ background subtraction for the full $N^{2}$ visibility matrix for one CHIME cylindrical reflector. We use the autocorrelation products to estimate the primary beam width and centroid location, and compare these quantities to solar transit measurements and holographic measurements where they overlap on the sky. We find that the drone, solar, and holography data have similar beam parameter evolution across frequency and both spatial coordinates. This paper presents the first drone-based beam measurement of a large cylindrical radio interferometer. Furthermore, the unique analysis and instrumentation described in this paper lays the foundation for near-field measurements of experiments like CHIME.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Studies of Phase Drift in RF Transmission Lines from the First Large-Scale Deployment of Microwave Frequency Multiplexing for Cosmology

Fulfilling the science goals of the Simons Observatory, a state-of-the-art cosmic microwave background (CMB) experiment, has required deploying tens of thousands of superconducting bolometers. Reading out data from the observatory's more than 67,000 transition-edge sensor (TES) detectors while maintaining cryogenic conditions requires an effective multiplexing scheme. The SLAC microresonator radio frequency (SMuRF) electronics have been developed to provide the warm electronics for a high-density microwave frequency multiplexing readout system, and this system has been shown to achieve multiplexing factors on the order of 1,000. SMuRF has recently been deployed to the Simons Observatory, which is located at 5,200 m on Cerro Toco in Chile's Atacama Desert. As the SMuRF system is exposed to the desert's diurnal temperature swings, resulting phase drift in RF transmission lines may introduce a systematic signal contamination. We present studies of phase drift in the room-temperature RF lines of the Simons Observatory's 6 m large-aperture telescope, which hosts the largest deployment to date of TES microwave frequency multiplexing to a single telescope. We show that these phase drifts occur on time scales which are significantly longer than sky scanning, and that their contribution to on-sky in-transition detector noise is within the readout noise budget.

astro-ph.IM↗

arXiv2024

Faraday tomography with CHIME: the `tadpole' feature G137+7

A direct consequence of Faraday rotation is that the polarized radio sky does not resemble the total intensity sky at long wavelengths. We analyze G137+7, which is undetectable in total intensity but appears as a depolarization feature. We use the first polarization maps from the Canadian Hydrogen Intensity Mapping Experiment. Our $400-729$ MHz bandwidth and angular resolution, $17'$ to $30'$, allow us to use Faraday synthesis to analyze the polarization structure. In polarized intensity and polarization angle maps, we find a "tail" extending $10^\circ$ from the "head" and designate the combined object the "tadpole". Similar polarization angles, distinct from the background, indicate that the head and tail are physically associated. The head appears as a depolarized ring in single channels, but wideband observations show that it is a Faraday rotation feature. Our investigations of H I and H$α$ find no connections to the tadpole. The tail suggests motion of either the gas or an ionizing star through the ISM; the B2(e) star HD 20336 is a candidate. While the head features a coherent, $\sim -8$ rad m$^2$ Faraday depth, Faraday synthesis also identifies multiple components in both the head and tail. We verify the locations of the components in the spectra using QU fitting. Our results show that $\sim$octave-bandwidth Faraday rotation observations at $\sim 600$ MHz are sensitive to low-density ionized or partially-ionized gas which is undetectable in other tracers.

astro-ph.GA↗

arXiv2024

Holographic Beam Measurements of the Canadian Hydrogen Intensity Mapping Experiment (CHIME)

We present the first results of the holographic beam mapping program for the Canadian Hydrogen Intensity Mapping Experiment (CHIME). We describe the implementation of the holographic technique as adapted for CHIME, and introduce the processing pipeline which prepares the raw holographic timestreams for analysis of beam features. We use data from six bright sources across the full 400-800\,MHz observing band of CHIME to provide measurements of the co-polar and cross-polar beam response of CHIME in both amplitude and phase for the 1024 dual-polarized feeds instrumented on CHIME. In addition, we present comparisons with independent probes of the CHIME beam which indicate the presence of polarized beam leakage in CHIME. Holographic measurements of the CHIME beam have already been applied in science with CHIME, e.g. in estimating detection significance of far sidelobe FRBs, and in validating the beam models used for CHIME's first detections of \tcm emission (in cross-correlation with measurements of large-scale structure from galaxy surveys and the Lyman-$α$ forest). Measurements presented in this paper, and future holographic results, will provide a unique data set to characterize the CHIME beam and improve the experiment's prospects for a detection of BAO.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Studies of Detector Yield and Readout Noise From the First Large-Scale Deployment of Microwave Multiplexing at the Large Aperture Telescope

The Simons Observatory is a new ground-based cosmic microwave background experiment, which is currently being commissioned in Chile's Atacama Desert. During its survey, the observatory's small aperture telescopes will map 10% of the sky in bands centered at frequencies ranging from 27 to 280 GHz to constrain cosmic inflation models, and its large aperture telescope will map 40% of the sky in the same bands to constrain cosmological parameters and use weak lensing to study large-scale structure. To achieve these science goals, the Simons Observatory is deploying these telescopes' receivers with 60,000 state-of-the-art superconducting transition-edge sensor bolometers for its first five year survey. Reading out this unprecedented number of cryogenic sensors, however, required the development of a novel readout system. The SMuRF electronics were developed to enable high-density readout of superconducting sensors using cryogenic microwave SQUID multiplexing technology. The commissioning of the SMuRF systems at the Simons Observatory is the largest deployment to date of microwave multiplexing technology for transition-edge sensors. In this paper, we show that a significant fraction of the systems deployed so far to the Simons Observatory's large aperture telescope meet baseline specifications for detector yield and readout noise in this early phase of commissioning.

astro-ph.IM↗

arXiv2024

CHIME/FRB Outriggers: KKO Station System and Commissioning Results

Localizing fast radio bursts (FRBs) to their host galaxies is an essential step to better understanding their origins and using them as cosmic probes. The CHIME/FRB Outrigger program aims to add VLBI-localization capabilities to CHIME, such that FRBs may be localized to tens of milliarcsecond precision at the time of their discovery, more than sufficient for host galaxy identification. The first-built outrigger telescope is KKO, located 66 kilometers west of CHIME. Cross-correlating KKO with CHIME can achieve arcsecond-scale localization in right ascension while avoiding the worst effects of the ionosphere. This paper presents measurements of KKO's performance throughout its commissioning phase, as well as a summary of its design and function. We demonstrate KKO's capabilities as a standalone instrument by producing full-sky images, mapping the angular and frequency structure of the primary beam, and measuring feed positions. To demonstrate the localization capabilities of the CHIME -- KKO baseline, we collected five separate observations each for a set of twenty bright pulsars, and aimed to measure their positions to within 5~arcseconds. All of these pulses were successfully localized to within this specification. The next two outriggers are expected to be commissioned in 2024, and will enable subarcsecond localizations for approximately hundreds of FRBs each year.

astro-ph.IM↗

arXiv2023

A Detection of Cosmological 21 cm Emission from CHIME in Cross-correlation with eBOSS Measurements of the Lyman-$α$ Forest

We report the detection of 21 cm emission at an average redshift $\bar{z} = 2.3$ in the cross-correlation of data from the Canadian Hydrogen Intensity Mapping Experiment (CHIME) with measurements of the Lyman-$α$ forest from eBOSS. Data collected by CHIME over 88 days in the $400-500$~MHz frequency band ($1.8 < z < 2.5$) are formed into maps of the sky and high-pass delay filtered to suppress the foreground power, corresponding to removing cosmological scales with $k_\parallel \lesssim 0.13\ \text{Mpc}^{-1}$ at the average redshift. Line-of-sight spectra to the eBOSS background quasar locations are extracted from the CHIME maps and combined with the Lyman-$α$ forest flux transmission spectra to estimate the 21 cm-Lyman-$α$ cross-correlation function. Fitting a simulation-derived template function to this measurement results in a $9σ$ detection significance. The coherent accumulation of the signal through cross-correlation is sufficient to enable a detection despite excess variance from foreground residuals $\sim6-10$ times brighter than the expected thermal noise level in the correlation function. These results are the highest-redshift measurement of \tcm emission to date, and set the stage for future 21 cm intensity mapping analyses at $z>1.8$.

astro-ph.CO↗

arXiv2023

The First CHIME/FRB Fast Radio Burst Catalog

We present a catalog of 536 fast radio bursts (FRBs) detected by the Canadian Hydrogen Intensity Mapping Experiment Fast Radio Burst (CHIME/FRB) Project between 400 and 800 MHz from 2018 July 25 to 2019 July 1, including 62 bursts from 18 previously reported repeating sources. The catalog represents the first large sample, including bursts from repeaters and non-repeaters, observed in a single survey with uniform selection effects. This facilitates comparative and absolute studies of the FRB population. We show that repeaters and apparent non-repeaters have sky locations and dispersion measures (DMs) that are consistent with being drawn from the same distribution. However, bursts from repeating sources differ from apparent non-repeaters in intrinsic temporal width and spectral bandwidth. Through injection of simulated events into our detection pipeline, we perform an absolute calibration of selection effects to account for systematic biases. We find evidence for a population of FRBs - comprising a large fraction of the overall population - with a scattering time at 600 MHz in excess of 10 ms, of which only a small fraction are observed by CHIME/FRB. We infer a power-law index for the cumulative fluence distribution of $α=-1.40\pm0.11(\textrm{stat.})^{+0.06}_{-0.09}(\textrm{sys.})$, consistent with the $-3/2$ expectation for a non-evolving population in Euclidean space. We find $α$ is steeper for high-DM events and shallower for low-DM events, which is what would be expected when DM is correlated with distance. We infer a sky rate of $[525\pm30(\textrm{stat.})^{+140}_{-130}({\textrm{sys.}})]/\textrm{sky}/\textrm{day}$ above a fluence of 5 Jy ms at 600 MHz, with scattering time at $600$ MHz under 10 ms, and DM above 100 pc cm$^{-3}$.

astro-ph.HE↗

arXiv2022

Characterization of the John A. Galt telescope for radio holography with CHIME

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) will measure the 21 cm emission of astrophysical neutral hydrogen to probe large scale structure at redshifts z=0.8-2.5. However, detecting the 21 cm signal beneath substantially brighter foregrounds remains a key challenge. Due to the high dynamic range between 21 cm and foreground emission, an exquisite calibration of instrument systematics, notably the telescope beam, is required to successfully filter out the foregrounds. One technique being used to achieve a high fidelity measurement of the CHIME beam is radio holography, wherein signals from each of CHIME's analog inputs are correlated with the signal from a co-located reference antenna, the 26 m John A. Galt telescope, as the 26 m Galt telescope tracks a bright point source transiting over CHIME. In this work we present an analysis of several of the Galt telescope's properties. We employ driftscan measurements of several bright sources, along with background estimates derived from the 408 MHz Haslam map, to estimate the Galt system temperature. To determine the Galt telescope's beam shape, we perform and analyze a raster scan of the bright radio source Cassiopeia A. Finally, we use early holographic measurements to measure the Galt telescope's geometry with respect to CHIME for the holographic analysis of the CHIME and Galt interferometric data set.

astro-ph.IM↗

arXiv2022

An Overview of CHIME, the Canadian Hydrogen Intensity Mapping Experiment

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a drift scan radio telescope operating across the 400-800 MHz band. CHIME is located at the Dominion Radio Astrophysical Observatory near Penticton, BC Canada. The instrument is designed to map neutral hydrogen over the redshift range 0.8 to 2.5 to constrain the expansion history of the Universe. This goal drives the design features of the instrument. CHIME consists of four parallel cylindrical reflectors, oriented north-south, each 100 m $\times$ 20 m and outfitted with a 256 element dual-polarization linear feed array. CHIME observes a two degree wide stripe covering the entire meridian at any given moment, observing 3/4 of the sky every day due to Earth rotation. An FX correlator utilizes FPGAs and GPUs to digitize and correlate the signals, with different correlation products generated for cosmological, fast radio burst, pulsar, VLBI, and 21 cm absorber backends. For the cosmology backend, the $N_\mathrm{feed}^2$ correlation matrix is formed for 1024 frequency channels across the band every 31 ms. A data receiver system applies calibration and flagging and, for our primary cosmological data product, stacks redundant baselines and integrates for 10 s. We present an overview of the instrument, its performance metrics based on the first three years of science data, and we describe the current progress in characterizing CHIME's primary beam response. We also present maps of the sky derived from CHIME data; we are using versions of these maps for a cosmological stacking analysis as well as for investigation of Galactic foregrounds.

astro-ph.IM↗

arXiv2022

Using the Sun to Measure the Primary Beam Response of the Canadian Hydrogen Intensity Mapping Experiment

We present a beam pattern measurement of the Canadian Hydrogen Intensity Mapping Experiment (CHIME) made using the Sun as a calibration source. As CHIME is a pure drift scan instrument, we rely on the seasonal North-South motion of the Sun to probe the beam at different elevations. This semiannual range in elevation, combined with the radio brightness of the Sun, enables a beam measurement which spans ~7,200 square degrees on the sky without the need to move the telescope. We take advantage of observations made near solar minimum to minimize the impact of solar variability, which is observed to be <10% in intensity over the observation period. The resulting data set is highly complementary to other CHIME beam measurements -- both in terms of angular coverage and systematics -- and plays an important role in the ongoing program to characterize the CHIME primary beam.

astro-ph.IM↗

arXiv2022

Detection of Cosmological 21 cm Emission with the Canadian Hydrogen Intensity Mapping Experiment

We present a detection of 21-cm emission from large-scale structure (LSS) between redshift 0.78 and 1.43 made with the Canadian Hydrogen Intensity Mapping Experiment (CHIME). Radio observations acquired over 102 nights are used to construct maps which are foreground filtered and stacked on the angular and spectral locations of luminous red galaxies (LRG), emission line galaxies (ELG), and quasars (QSO) from the eBOSS clustering catalogs. We find decisive evidence for a detection when stacking on all three tracers of LSS, with the logarithm of the Bayes Factor equal to 18.9 (LRG), 10.8 (ELG), and 56.3 (QSO). An alternative frequentist interpretation, based on the likelihood-ratio test, yields a detection significance of $7.1σ$ (LRG), $5.7σ$ (ELG), and $11.1σ$ (QSO). These are the first 21-cm intensity mapping measurements made with an interferometer. We constrain the effective clustering amplitude of neutral hydrogen (HI), defined as $\mathcal{A}_{\rm HI}\equiv 10^{3}\,Ω_\mathrm{HI}\left(b_\mathrm{HI}+\langle\,fμ^{2}\rangle\right)$, where $Ω_\mathrm{HI}$ is the cosmic abundance of HI, $b_\mathrm{HI}$ is the linear bias of HI, and $\langle\,fμ^{2}\rangle=0.552$ encodes the effect of redshift-space distortions at linear order. We find $\mathcal{A}_\mathrm{HI}=1.51^{+3.60}_{-0.97}$ for LRGs $(z=0.84)$, $\mathcal{A}_\mathrm{HI}=6.76^{+9.04}_{-3.79}$ for ELGs $(z=0.96)$, and $\mathcal{A}_\mathrm{HI}=1.68^{+1.10}_{-0.67}$ for QSOs $(z=1.20)$, with constraints limited by modeling uncertainties at nonlinear scales. We are also sensitive to bias in the spectroscopic redshifts of each tracer, and find a non-zero bias $Δ\,v= -66 \pm 20 \mathrm{km/s}$ for the QSOs. We split the QSO catalog into three redshift bins and have a decisive detection in each, with the upper bin at $z=1.30$ producing the highest redshift 21-cm intensity mapping measurement thus far.

astro-ph.CO↗