arXiv subjects

U. Mohideen

Publications and source records attributed to U. Mohideen.

At least 55 records · Page 3Linked to original sources

arXiv2007

Comment on ``Precision measurement of the Casimir-Lifshitz force in a fluid''

Recently J.N. Munday and F. Capasso [Phys. Rev. A {\bf 75}, 060102(R) (2007); arXiv:0705.3793] claimed that they have performed a precision measurement of the Casimir force between a sphere and a plate coated with Au, both immersed in ethanol. The measurement results were claimed to be consistent with the Lifshitz theory. We demonstrate that the calculation of the Casimir force between the smooth bodies following the authors prescription has a discrepancy up to 25% with respect to authors result. We show also that the attractive electrostatic force only due to the surface potential differences was underestimated by a factor of 590 and the charge double layer interaction was not taken into account. All this leads to the conclusion that the results of this experiment are in fact uncertain.

physics.atom-ph↗

arXiv2007

Control of the Casimir force by the modification of dielectric properties with light

The experimental demonstration of the modification of the Casimir force between a gold coated sphere and a single-crystal Si membrane by light pulses is performed. The specially designed and fabricated Si membrane was irradiated with 514 nm laser pulses of 5 ms width in high vacuum leading to a change of the charge-carrier density. The difference in the Casimir force in the presence and in the absence of laser radiation was measured by means of an atomic force microscope as a function of separation at different powers of the absorbed light. The total experimental error of the measured force differences at a separation of 100 nm varies from 10 to 20% in different measurements. The experimental results are compared with theoretical computations using the Lifshitz theory at both zero and laboratory temperatures. The total theoretical error determined mostly by the uncertainty in the concentration of charge carriers when the light is incident is found to be about 14% at separations less than 140 nm. The experimental data are consistent with the Lifshitz theory at laboratory temperature, if the static dielectric permittivity of high-resistivity Si in the absence of light is assumed to be finite. If the dc conductivity of high-resistivity Si in the absence of light is included into the model of dielectric response, the Lifshitz theory at nonzero temperature is shown to be experimentally inconsistent at 95% confidence. The demonstrated phenomenon of the modification of the Casimir force through a change of the charge-carrier density is topical for applications of the Lifshitz theory to real materials in fields ranging from nanotechnology and condensed matter physics to the theory of fundamental interactions.

cond-mat.stat-mech↗

arXiv2007

Pulsating Casimir force

Based on the Lifshitz theory we show that the illumination of one (Si) plate in the three-layer systems Au--ethanol--Si, Si--ethanol--Si and $α$-Al${}_2$O${}_3$--ethanol--Si with laser pulses can change the Casimir attraction to Casimir repulsion and vice versa. The proposed effect opens novel opportunities in nanotechnology to actuate the periodic movement in electro- and optomechanical micromachines based entirely on the zero-point oscillations of the quantum vacuum without the action of mechanical springs.

quant-ph↗

arXiv2007

Experimental approaches to the difference in the Casimir force through the varying optical properties of boundary surface

We propose two novel experiments on the measurement of the Casimir force acting between a gold coated sphere and semiconductor plates with markedly different charge carrier densities. In the first of these experiments a patterned Si plate is used which consists of two sections of different dopant densities and oscillates in the horizontal direction below a sphere. The measurement scheme in this experiment is differential, i.e., allows the direct high-precision measurement of the difference of the Casimir forces between the sphere and sections of the patterned plate or the difference of the equivalent pressures between Au and patterned parallel plates with static and dynamic techniques, respectively. The second experiment proposes to measure the Casimir force between the same sphere and a VO${}_2$ film which undergoes the insulator-metal phase transition with the increase of temperature. We report the present status of the interferometer based variable temperature apparatus developed to perform both experiments and present the first results on the calibration and sensitivity. The magnitudes of the Casimir forces and pressures in the experimental configurations are calculated using different theoretical approaches to the description of optical and conductivity properties of semiconductors at low frequencies proposed in the literature. It is shown that the suggested experiments will aid in the resolution of theoretical problems arising in the application of the Lifshitz theory at nonzero temperature to real materials. They will also open new opportunities in nanotechnology.

quant-ph↗

arXiv2007

Demonstration of optically modulated dispersion forces

We report the first experiment on the optical modulation of dispersion forces through a change of the carrier density in a Si membrane. For this purpose a high-vacuum based atomic force microscope and excitation light pulses from an Ar laser are used. The experimental results are compared with two theoretical models. The modulation of the dispersion force will find applications in optomechanical micromachines.

quant-ph↗

arXiv2007

Kramers-Kronig relations for plasma-like permittivities and the Casimir force

The Kramers-Kronig relations are derived for the permittivity of the usual plasma model which neglects dissipation and of a generalized model which takes into account the interband transitions. The generalized plasma model is shown to be consistent with all precision experiments on the measurement of the Casimir force.

quant-ph↗

arXiv2007

Comment on ``Lateral Casimir force beyond the proximity-force approximation''

We demonstrate that the approach by Rodrigues et al. (PRL, v.96, 100402, 2006) to the description of the lateral Casimir force between corrugated surfaces is in disagreement with a path-integral theory by Emig et al. (PRA, v.67, 022114, 2003), and the approximations used are not appropriate for comparison to experiment.

quant-ph↗

arXiv2006

Demonstration of the difference Casimir force for samples with different charge carrier densities

A measurement of the Casimir force between a gold coated sphere and two Si plates of different carrier densities is performed using a high vacuum based atomic force microscope. The results are compared with the Lifshitz theory and good agreement is found. Our experiment demonstrates that by changing the carrier density of the semiconductor plate by several orders of magnitude it is possible to modify the Casimir interaction. This result may find applications in nanotechnology.

quant-ph↗

arXiv2006

Experimental test for the conductivity properties from the Casimir force between metal and semiconductor

The experimental investigation of the Casimir force between a large metallized sphere and semiconductor plate is performed using an atomic force microscope. Improved calibration and measurement procedures permitted reduction in the role of different uncertainties. Rigorous statistical procedures are applied for the analysis of random, systematic and total experimental errors at 95% confidence. The theoretical Casimir force is computed for semiconductor plates with different conductivity properties taking into account all theoretical uncertainties discussed in literature. The comparison between experiment and theory is done at both 95 and 70% confidence. It is demonstrated that the theoretical results computed for the semiconductor plate used in experiment are consistent with data. At the same time, theory describing a dielectric plate is excluded by experiment at 70% confidence. Thus, the Casimir force is proved to be sensitive to the conductivity properties of semiconductors.

quant-ph↗

arXiv2005

Rigorous approach to the comparison between experiment and theory in Casimir force measurements

In most experiments on the Casimir force the comparison between measurement data and theory was done using the concept of the root-mean-square deviation, a procedure that has been criticized in literature. Here we propose a special statistical analysis which should be performed separately for the experimental data and for the results of the theoretical computations. In so doing, the random, systematic, and total experimental errors are found as functions of separation, taking into account the distribution laws for each error at 95% confidence. Independently, all theoretical errors are combined to obtain the total theoretical error at the same confidence. Finally, the confidence interval for the differences between theoretical and experimental values is obtained as a function of separation. This rigorous approach is applied to two recent experiments on the Casimir effect.

quant-ph↗

arXiv2005

Investigation of the Casimir force between metal and semiconductor test bodies

The measurement of the Casimir force between a large gold coated sphere and single crystal silicon plate is performed with an atomic force microscope. A rigorous statistical comparison of data with theory is done, without use of the concept of root-mean-square deviation, and excellent agreement is obtained. The Casimir force between metal and semiconductor is demonstrated to be significantly different than between two similar or dissimilar metals.

quant-ph↗

arXiv2004

On the control of the lateral Casimir force between corrugated surfaces

The general perturbative expression for the lateral Casimir force between two plates covered by longitudinal corrugations of arbitrary shape is obtained. This expression is applicable for corrugation periods larger than the separation distance. The cases of asymmetric corrugations are considered, which allow to increase the maximum to minimum force ratio and affect the character of equilibrium points. This opens new opportunities to control the lateral Casimir forces for use in microelectromechanical devices based entirely on the vacuum fluctuation properties.

quant-ph↗

arXiv2004

Theory confronts experiment in the Casimir force measurements: quantification of errors and precision

We compare theory and experiment in the Casimir force measurement between gold surfaces performed with the atomic force microscope. Both random and systematic experimental errors are found leading to a total absolute error equal to 8.5 pN at 95% confidence. In terms of the relative errors, experimental precision of 1.75% is obtained at the shortest separation of 62 nm at 95% confidence level (at 60% confidence the experimental precision of 1% is confirmed at the shortest separation). An independent determination of the accuracy of the theoretical calculations of the Casimir force and its application to the experimental configuration is carefully made. Special attention is paid to the sample-dependent variations of the optical tabulated data due to the presence of grains, contribution of surface plasmons, and errors introduced by the use of the proximity force theorem. Nonmultiplicative and diffraction-type contributions to the surface roughness corrections are examined. The electric forces due to patch potentials resulting from the polycrystalline nature of the gold films are estimated. The finite size and thermal effects are found to be negligible. The theoretical accuracy of about 1.69% and 1.1% are found at a separation 62 nm and 200 nm, respectively. Within the limits of experimental and theoretical errors very good agreement between experiment and theory is confirmed characterized by the root mean square deviation of about 3.5 pN within all measurement range. The conclusion is made that the Casimir force is stable relative to variations of the sample-dependent optical and electric properties, which opens new opportunities to use the Casimir effect for diagnostic purposes.

quant-ph↗

arXiv2003

New features of the thermal Casimir force at small separations

The difference of the thermal Casimir forces at different temperatures between real metals is shown to increase with a decrease of the separation distance. This opens new opportunities for the demonstration of the thermal dependence of the Casimir force. Both configurations of two parallel plates and a sphere above a plate are considered. Different approaches to the theoretical description of the thermal Casimir force are shown to lead to different measurable predictions.

quant-ph↗

arXiv2002

Experimental and Theoretical Investigation of the Lateral Casimir Force Between Corrugated Surfaces

The lateral Casimir force acting between a sinusoidally corrugated gold plate and sphere was calculated and measured. The experimental setup was based on the atomic force microscope specially adapted for the measurement of the lateral Casimir force. The measured force oscillates sinusoidally as a function of the phase difference between the two corrugations. Both systematic and random errors are analysed and a lateral force amplitude of $3.2\times 10^{-13} $N was measured at a separation distance of 221 nm with a resulting relative error 24% at a 95% confidence probability. The dependence of the measured lateral force amplitude on separation was investigated and shown to be consistent with the inverse fourth power distance dependence. The complete theory of the lateral Casimir force is presented including finite conductivity and roughness corrections. The obtained theoretical dependence was analysed as a function of surface separation, corrugation amplitudes, phase difference, and plasma wavelength of a metal. The theory was compared with the experimental data and shown to be in good agreement. The constraints on hypothetical Yukawa-type interactions following from the measurements of the lateral Casimir force are calculated. The possible applications of the lateral vacuum forces to nanotechnology are discussed.

quant-ph↗

arXiv2002

Demonstration of the Lateral Casimir Force

The lateral Casimir force between a sinusoidally corrugated gold coated plate and large sphere was measured for surface separations between 0.2 $μ$m to 0.3 $μ$m using an atomic force microscope. The measured force shows the required periodicity corresponding to the corrugations. It also exhibits the necessary inverse fourth power distance dependence. The obtained results are shown to be in good agreement with a complete theory taking into account the imperfectness of the boundary metal. This demonstration opens new opportunities for the use of the Casimir effect for lateral translation in microelectromechanical systems.

quant-ph↗

arXiv2001

New Developments in the Casimir Effect

We provide a review of both new experimental and theoretical developments in the Casimir effect. The Casimir effect results from the alteration by the boundaries of the zero-point electromagnetic energy. Unique to the Casimir force is its strong dependence on shape, switching from attractive to repulsive as function of the size, geometry and topology of the boundary. Thus the Casimir force is a direct manifestation of the boundary dependence of quantum vacuum. We discuss in depth the general structure of the infinities in the field theory which are removed by a combination of zeta-functional regularization and heat kernel expansion. Different representations for the regularized vacuum energy are given. The Casimir energies and forces in a number of configurations of interest to applications are calculated. We stress the development of the Casimir force for real media including effects of nonzero temperature, finite conductivity of the boundary metal and surface roughness. Also the combined effect of these important factors is investigated in detail on the basis of condensed matter physics and quantum field theory at nonzero temperature. The experiments on measuring the Casimir force are also reviewed, starting first with the older measurements and finishing with a detailed presentation of modern precision experiments. The latter are accurately compared with the theoretical results for real media. At the end of the review we provide the most recent constraints on the corrections to Newtonian gravitational law and other hypothetical long-range interactions at submillimeter range obtained from the Casimir force measurements.

quant-ph↗

arXiv2000

Improved Precision Measurement of the Casimir Force Using Gold Surfaces

We report an improved precision measurement of the Casimir force using metallic gold surfaces. The force is measured between a large gold coated sphere and flat plate using an Atomic Force Microscope. The use of gold surfaces removes some theoretical uncertainties in the interpretation of the measurement. The forces are also measured at smaller surface separations. The complete dielectric spectrum of the metal is used in the comparison of theory to the experiment. The average statistical precision remains at the same 1% of the forces measured at the closest separation. These results should lead to the development of stronger constraints on hypothetical forces.

quant-ph↗