arXiv subjects

U. Qasim

Publications and source records attributed to U. Qasim.

At least 19 recordsLinked to original sources

arXiv2013

Energy optimization and Performance Analysis of Cluster Based Routing Protocols Extended from LEACH for WSNs

An energy efficient routing protocol is the major attentiveness for researcher in field of Wireless Sensor Networks (WSNs). In this paper, we present some energy efficient hierarchal routing protocols, prosper from conventional Low Energy Adaptive Clustering Hierarchy (LEACH) routing protocol. Fundamental objective of our consideration is to analyze, how these ex- tended routing protocols work in order to optimize lifetime of network nodes and how quality of routing protocols is improved for WSNs. Furthermore, this paper also emphasizes on some issues experienced by LEACH and also explains how these issues are tackled by other enhanced routing protocols from classi- cal LEACH. We analytically compare the features and performance issues of each hierarchal routing protocol. We also simulate selected clustering routing protocols for our study in order to elaborate the enhancement achieved by ameliorate routing protocols.

cs.NI↗

arXiv2013

An Energy Efficient Decoding Scheme for Wireless Body Area Sensor Networks

One of the major challenges in Wireless Body Area Networks (WBANs) is to prolong the lifetime of network. Traditional research work focuses on minimizing transmit power; however, in the case of short range communication the consumption power in decoding is significantly larger than transmit power. This paper investigates the minimization of total power consumption by reducing the decoding power consumption. For achieving a desired Bit Error Rate (BER), we introduce some fundamental results on the basis of iterative message-passing algorithms for Low Density Parity Check Code (LDPC). To reduce energy dissipation in decoder, LDPC based coded communications between sensors are considered. Moreover, we evaluate the performance of LDPC at different code rates and introduce Adaptive Iterative Decoding (AID) by exploiting threshold on the number of iterations for a certain BER (0.0004). In iterative LDPC decoding, the total energy consumption of network is reduced by 20 to 25%.

cs.NI↗

arXiv2013

iMOD LEACH: improved MODified LEACH Protocol for Wireless Sensor Networks

Increased use of Wireless sensor Networks (WSNs) in variety of applications has enabled the designers to create autonomous sensors, which can be deployed randomly, without human supervision, for the purpose of sensing and communicating valuable data. Many energy-efficient routing protocols are designed for WSNs based on clustering structure. In this paper, we have proposed iMODLEACH protocol which is an extension to the MODLEACH protocol. Simulation results indicate that iMODLEACH outperforms MODLEACH in terms of network life-time and packets transferred to base station. The mathematical analysis helps to select such values of these parameters which can suit a particular wireless sensor network application.

cs.NI↗

arXiv2013

Modeling and Evaluating Performance of Routing Operations in Reactive Routing Protocols

Reactive routing protocols are gaining popularity due to their event driven nature day by day. In this vary paper, reactive routing is studied precisely. Route request, route reply and route maintenance phases are modeled with respect to control overhead. Control overhead varies with respect to change in various parameters. Our model calculates these variations as well. Besides modeling, we chose three most favored reactive routing protocols as Ad-Hoc on Demand Distance Vector (AODV), Dynamic Source Routing (DSR) and Dynamic MANET on Demand (DYMO) for our experiments. We simulated these protocols using ns-2 for a detailed comparison and performance analysis with respect to mobility and scalability issues keeping metrics of throughput, route delay and control over head. Their performances and comparisons are extensively presented in last part of our work.

cs.NI↗

arXiv2013

Modeling and Evaluating Performance of Routing Operations in Proactive Routing Protocols

To ensure seamless communication in wireless multi-hop networks, certain classes of routing protocols are defined. This vary paper, is based upon proactive routing protocols for Wireless multihop networks. Initially, we discuss Destination Sequence Distance Vector (DSDV), Fish-eye State Routing (FSR) and Optimized Link State Routing (OLSR), precisely followed by mathematical frame work of control overhead regarding proactive natured routing protocols. Finally, extensive simulations are done using NS 2 respecting above mentioned routing protocols covering mobility and scalability issues. Said protocols are compared under mobile and dense environments to conclude our performance analysis.

cs.NI↗

arXiv2013

Evaluating Wireless Proactive Routing Protocols under Mobility and Scalability Constraints

Wireless Multi-hop Networks (WMhNs) provide users with the facility to communicate while moving with whatever the node speed, the node density and the number of traffic flows they want, without any unwanted delay and/or disruption. This paper contributes Linear Programming models (LP_models) for WMhNs. In WMhNs, different routing protocols are used to facilitate users demand(s). To practically examine the constraints of respective LP_models over different routing techniques, we select three proactive routing protocols; Destination Sequence Distance Vector (DSDV), Fish-eye State Routing (FSR) and Optimized Link State Routing (OLSR). These protocols are simulated in two important scenarios regarding to user demands; mobilities and different network flows. To evaluate the performance, we further relate the protocols strategy effects on respective constraints in selected network scenarios.

cs.NI↗

arXiv2013

Evaluating Wireless Reactive Routing Protocols with Linear Programming Model for Wireless Ad-hoc Networks

In Wireless Ad-hoc Networks, nodes are free to move randomly and organize themselves arbitrarily, thus topology may change quickly and capriciously. In Mobile Ad-hoc NETworks, specially Wireless Multi-hop Networks provide users with facility of quick communication. In Wireless Multi-hop Networks, routing protocols with energy efficient and delay reduction techniques are needed to fulfill users demands. In this paper, we present Linear Programming models to assess and enhance reactive routing protocols. To practically examine constraints of respective Linear Programming models over reactive protocols, we select AODV, DSR and DYMO. It is deduced from analytical simulations of Linear Programming models in MATLAB that quick route repair reduces routing latency and optimizations of retransmission attempts results efficient energy utilization. To provide quick repair, we enhance AODV and DSR. To practically examine the efficiency of enhanced protocols in different scenarios of Wireless Multi-hop Networks, we conduct simulations using NS-2. From simulation results, enhanced DSR and AODV achieve efficient output by optimizing routing latencies and routing load in terms of retransmission attempts.

cs.NI↗

arXiv2013

Modeling and Simulating Network Connectivity in Routing Protocols for MANETs and VANETs

This paper presents a framework for node distribution with respect to density, network connectivity and communication time. Using NS2, we evaluate and compare performance of three routing protocols; Ad-hoc On-demand Distance Vector (AODV), Dynamic Source Routing (DSR) and Fisheye State Routing (FSR) both in MANETs (IEEE 802.11) and VANETs (IEEE 802.11p). We further enhanced these protocols by changing their routing information exchange intervals; MOD AODV, MOD DSR and MOD FSR. A comprehensive simulation work is performed for the comparison of these routing protocols for varying motilities and scalabilities of nodes. As a result, we can say that AODV outperforms DSR and FSR both in MANETs and VANETs.

cs.NI↗

arXiv2013

Evaluating and Comparing Probability of Path Loss in DSDV, OLSR and DYMO at 802.11 and 802.11p

In this paper, we present path loss model for VANETs and simulate three routing protocols; Destination Sequenced Distance Vector (DSDV), Optimized Link State Routing (OLSR) and Dynamic MANET On-demand (DYMO) to evaluate and compare their performance using NS-2. The main contribution of this work is enhancement of existing techniques to achieve high efficiency of the underlying networks. After extensive simulations in NS-2, we conclude that DSDV best performs with 802.11p while DYMO gives outstanding performance with 802.11.

cs.NI↗

arXiv2013

On Modeling Geometric Joint Sink Mobility with Delay-Tolerant Cluster-less Wireless Sensor Networks

Moving Sink (MS) in Wireless Sensor Networks (WSNs) has appeared as a blessing because it collects data directly from the nodes where the concept of relay nodes is becomes obsolete. There are, however, a few challenges to be taken care of, like data delay tolerance and trajectory of MS which is NP-hard. In our proposed scheme, we divide the square field in small squares. Middle point of the partitioned area is the sojourn location of the sink, and nodes around MS are in its transmission range, which send directly the sensed data in a delay-tolerant fashion. Two sinks are moving simultaneously; one inside and having four sojourn locations and other in outer trajectory having twelve sojourn locations. Introduction of the joint mobility enhances network life and ultimately throughput. As the MS comes under the NP-hard problem, we convert it into a geometric problem and define it as, Geometric Sink Movement (GSM). A set of linear programming equations has also been given in support of GSM which prolongs network life time.

cs.NI↗

arXiv2013

On Sink Mobility Trajectory in Clustering Routing Protocols in WSNs

Energy efficient routing protocols are consistently cited as efficient solutions for Wireless Sensor Networks (WSNs) routing. The area of WSNs is one of the emerging and fast growing fields which brought low cost, low power and multi-functional sensor nodes. In this paper, we examine some protocols related to homogeneous and heterogeneous networks. To evaluate the efficiency of different clustering schemes, we compare five clustering routing protocols; Low Energy Adaptive Clustering Hierarchy (LEACH), Threshold Sensitive Energy Efficient Sensor Network (TEEN), Distributed Energy Efficient Clustering (DEEC) and two variants of TEEN which are Clustering and Multi-Hop Protocol in Threshold Sensitive Energy Efficient Sensor Network (CAMPTEEN) and Hierarchical Threshold Sensitive Energy Efficient Sensor Network (H-TEEN). The contribution of this paper is to introduce sink mobility to increase the network life time of hierarchal routing protocols. Two scenarios are discussed to compare the performances of routing protocols; in first scenario static sink is implanted and in later one mobile sink is used. We perform analytical simulations in MATLAB by using different performance metrics such as, number of alive nodes, number of dead nodes and throughput.

cs.NI↗

arXiv2013

HEER: Hybrid Energy Efficient Reactive Protocol for Wireless Sensor Networks

Wireless Sensor Networks (WSNs) consist of numerous sensors which send sensed data to base station. Energy conservation is an important issue for sensor nodes as they have limited power.Many routing protocols have been proposed earlier for energy efficiency of both homogeneous and heterogeneous environments. We can prolong our stability and network lifetime by reducing our energy consumption. In this research paper, we propose a protocol designed for the characteristics of a reactive homogeneous WSNs, HEER (Hybrid Energy Efficient Reactive) protocol. In HEER, Cluster Head(CH) selection is based on the ratio of residual energy of node and average energy of network. Moreover, to conserve more energy, we introduce Hard Threshold (HT) and Soft Threshold (ST). Finally, simulations show that our protocol has not only prolonged the network lifetime but also significantly increased stability period.

cs.NI↗

arXiv2013

ACH: Away Cluster Heads Scheme for Energy Efficient Clustering Protocols in WSNs

This paper deals with the routing protocols for distributed wireless sensor networks. The conventional protocols for WSNs like Low Energy adaptive Clustering Hierarchy (LEACH), Stable Election Protocol (SEP), Threshold Sensitive Energy Efficient Network (TEEN), Distributed Energy Efficient Clustering Protocol (DEEC) may not be optimal. We propose a scheme called Away Cluster Head (ACH) which effectively increases the efficiency of conventional clustering based protocols in terms of stability period and number of packets sent to base station (BS). We have implemented ACH scheme on LEACH, SEP, TEEN and DEEC. Simulation results show that LEACHACH, SEP-ACH, TEEN-ACH and DEEC-ACH performs better than LEACH, SEP, TEEN and DEEC respectively in terms of stability period and number of packets sent to BS. The stability period of the existing protocols prolongs by implementing ACH on them.

cs.NI↗

arXiv2013

Towards LP Modeling for Maximizing Throughput and Minimizing Routing Delay in Proactive Protocols in Wireless Multi-hop Networks

Wireless Multi-hop Networks (WMhNs) provide users with the facility to communicate while moving with whatever the node speed, the node density and the number of traffic flows they want, without any unwanted delay and/or disruption. This paper contributes Linear Programming models (LP_models) for WMhNs. In WMhNs, different routing protocols are used to facilitate users demand(s). To practically examine constraints of respective LP_models over different routing techniques, we select three proactive routing protocols; Destination Sequence Distance Vector (DSDV), Fish-eye State Routing (FSR) and Optimized Link State Routing (OLSR). These protocols are simulated in two important scenarios regarding to user demands; mobilities and different network flows. To evaluate the performance, we further relate the protocols strategy effects on respective constraints in selected network scenarios.

cs.NI↗

arXiv2013

On Energy Efficiency and Delay Minimization in Reactive Protocols in Wireless Multi-hop Networks

In Wireless Multi-hop Networks (WMhNs), routing protocols with energy efficient and delay reduction techniques are needed to fulfill users demands. In this paper, we present Linear Programming models (LP_models) to assess and enhance reactive routing protocols. To practically examine constraints of respective LP_models over reactive protocols, we select AODV, DSR and DYMO. It is deduced from analytical simulations of LP_models in MATLAB that quick route repair reduces routing latency and optimizations of retransmission attempts results efficient energy utilization. To provide quick repair, we enhance AODV and DSR. To practically examine the efficiency of enhanced protocols in different scenarios of WMhNs, we conduct simulations using NS- 2. From simulation results, enhanced DSR and AODV achieve efficient output by optimizing routing latencies and routing load in terms of retransmission attempts.

cs.NI↗

arXiv2013

Density Controlled Divide-and-Rule Scheme for Energy Efficient Routing in Wireless Sensor Networks

Cluster based routing technique is most popular routing technique in Wireless Sensor Networks (WSNs). Due to varying need of WSN applications efficient energy utilization in routing protocols is still a potential area of research. In this research work we introduced a new energy efficient cluster based routing technique. In this technique we tried to overcome the problem of coverage hole and energy hole. In our technique we controlled these problems by introducing density controlled uniform distribution of nodes and fixing optimum number of Cluster Heads (CHs) in each round. Finally we verified our technique by experimental results of MATLAB simulations.

cs.NI↗

arXiv2013

SRP-MS: A New Routing Protocol for Delay Tolerant Wireless Sensor Networks

Sink Mobility is becoming popular due to excellent load balancing between nodes and ultimately resulting in prolonged network lifetime and throughput. A major challenge is to provide reliable and energy-efficient operations are to be taken into consideration for differentmobility patterns of sink. Aim of this paper is lifetime maximization of Delay TolerantWireless Sensor Networks (WSNs) through the manipulation of Mobile Sink (MS) on different trajectories. We propose Square Routing Protocol with MS (SRP-MS) based on existing SEP (Stable Election Protocol) by making it Cluster Less (CL) and introducing sink mobility.

cs.NI↗

arXiv2013

E-HORM: An Energy-efficient Hole Removing Mechanism in Wireless Senor Networks

Cluster based routing protocols forWireless Sensor Networks (WSNs) have been widely used for better performance in terms of energy efficiency. Efficient use of energy is challenging task of designing these protocols. Energy holes are created due to quickly drain the energy of a few nodes due to nonuniform node distribution in the network. Normally, energy holes make the data routing failure when nodes transmit data back to the sink. We propose Energy-efficientHOle Removing Mechanism (E-HORM) technique to remove energy holes. In this technique, we use sleep and awake mechanism for sensor nodes to save energy. This approach finds the maximum distance nodes to calculate the maximum energy for data transmission. We consider it as a threshold energy Eth. Every node first checks its energy level for data transmission. If the energy level of node is less than Eth, it cannot transmit data.

cs.NI↗