arXiv subjects

Ulrike Heiter

Publications and source records attributed to Ulrike Heiter.

At least 19 recordsLinked to original sources

arXiv2026

Gaia FGK Benchmark Stars: Impact of Spectral Resolution on Stellar Abundances

In the era of large Milky Way spectroscopic surveys, calibrating and standardizing stellar parameters and abundance measurements is crucial. The Gaia benchmark stars (GBS) are key references points characterized by well-defined parameters derived from fundamental relations independent of spectroscopy. We analyze 30 GBS with spectra data at three different resolutions. Our goal is to evaluate the impact of spectral resolution on the measurements of the stellar parameters and chemical abundances. We also present a line selection suitable for both metal-poor and metal-rich stars. We used R~190000 (R190), R~42000 (R42), R~28 000 (R28), and R190 degraded to R28 (R190-R28) spectral data to measure abundances with synthetic fitting and equivalent widths (EW) methods, testing the needed resolution to obtain consistent results. Our comparative analysis between R28 and R190-R28 shows that gaps in wavelength coverage can lead to discrepancies in the derived stellar parameters, particularly log g. These effects are not primarily driven by resolution, but rather by the limited spectral coverage and line availability. We find overall similar abundance, emphasizing the importance of line selection for spectroscopic studies. However, some elements (e.g, Ti II, Sc II) show larger discrepancies, possibly due to blending that becomes more pronounced as resolution decreases or is HFS-sensitive. Our comparative analysis shows that the abundances for Fe I, Ni I, Ti I, and Si I present less scatter across all resolutions, including R28. Our findings indicate that for some elements, synthetic fitting and the EW method give similar abundances, especially at the highest resolution. However, we also find that the highest resolution is not always essential for chemical abundance measurements. Our results provide practical guidelines for upcoming large surveys to reconstruct the chemical history of the Milky Way.

astro-ph.SR↗

arXiv2026

The PLATO Science Calibration and Validation Plan: Targets for the First Long-pointing Field

In order to meet the science goals of the PLATO space mission, an extensive science calibration and validation plan has been designed. This paper describes this plan, as well as the methodology adopted to select the science calibration and validation stars that have entered its input catalogue. This is the so-called {\tt scvPIC}, which is part of the general PLATO Input Catalogue (PIC) for the first selected long pointing field in the Southern Hemisphere known as LOPS2. While many of PLATO's science requirements needed dedicated stars as calibrators as discussed here, its most stringent requirement is the delivery of the age of the host stars of exoplanetary systems with an accuracy better than 10\% for a G0V star of {\it V} = 10 mag, i.e. a nearby Sun-like star. This is presently not within reach for large populations of dwarfs and subgiants in the Milky Way as it requires the models of their stellar interiors to be improved. We discuss how this ambitious age requirement led to the selection of tens of thousands of red giants, and of thousands of main-sequence early F-type gravity-mode pulsators in order to deduce their internal rotation profile across stellar evolution. This asteroseismic observable will then be imported as key information into improved models of dwarfs and subgiants in the Milky Way as optimal modelling tools for ever better age-dating of the exoplanet hosts as the PLATO mission moves along. Additional calibrators and validators included in the {\tt scvPIC} are a few thousands of binaries, a few hundreds of legacy and benchmark stars, a few hundred photometrically stable stars, and six transiting brown dwarfs.

astro-ph.SR↗

arXiv2026

Gaia FGK Benchmark Stars: Selecting Infrared Lines for Abundance Determination

The advent of new and more powerful infrared spectrographs has significantly motivated the advancement of the study of atomic and molecular line lists and stellar atmosphere models. While optical abundance determinations rely on extensively validated line lists and modeling frameworks, infrared measurements still face larger uncertainties, largely driven by the choice of atmospheric models and the quality of the available atomic data. In this work, we aim to deliver a homogeneous and reproducible set of atomic absorption lines in the Y, J, and H bands (9800 - 18000 (Angstrom)), based exclusively on laboratory atomic data. We analyse CRIRES spectra of six Gaia FGK Benchmark Stars spanning a wide range in effective temperature, surface gravity, and chemical composition. Synthetic spectra are computed using the benchmark stellar parameters, and each transition is evaluated independently in every star through a quantitative sequence that examines line depth, saturation, blending (purity), and the agreement between observed and synthetic line profiles. We identify a set of robust atomic transitions in these bands that remain consistent across the full range of stellar parameters represented in our sample. Lines of alpha-elements such as Mg I, Si I, and Ca I, together with several Fe I transitions, satisfy all robustness criteria. Among the neutron-capture species explored, only Sr II provides lines that consistently meet our requirements. Beyond the specific list of accepted transitions, this study demonstrates that a fully quantitative, multi-criteria framework provides a transparent and reproducible foundation for near-infrared line validation as laboratory data, stellar atmosphere models, and instrumentation continue to improve.

astro-ph.SR↗

arXiv2025

VLT/CRIRES+ observations of warm Neptune WASP-107 b: Challenges in detecting molecules with ground-based transmission spectroscopy of cooler and cloudy exoplanets

Atmospheres of transiting exoplanets can be studied spectroscopically using space-based or ground-based observations. Each has its own strengths and weaknesses, so there are benefits to both approaches. This is especially true for challenging targets such as cooler, smaller exoplanets whose atmospheres likely contain many molecular species and cloud decks. We aim to study the atmosphere of the warm Neptune-like exoplanet WASP-107 b (Teq~740 K). Several molecular species have been detected in this exoplanet in recent space-based JWST studies, and we aim to confirm and expand upon these detections using ground-based VLT, evaluating how well our findings agree with previously retrieved atmospheric parameters. We observe two transits of WASP-107 b with VLT/CRIRES+ and create cross-correlation templates of the target atmosphere based on retrieval results from JWST studies. We create different templates to investigate the impact of varying volume mixing ratios of species and inclusion or exclusion of clouds. Considering this target's observational challenges, we create simulated observations prior to evaluating real data to assess expected detection significances. We report detections of two molecular species, CO (~6 S/N) and H2O (~4.5 S/N). This confirms previous space-based detections and demonstrates, for the first time, the capability of VLT/CRIRES+ to detect species in targets cooler than hot Jupiters using transmission spectroscopy. We show our analysis is sensitive to cloud inclusion, but less so to different volume mixing ratios. Interestingly, our detection deviates from its expected location in our Kp-vsys diagrams, and we speculate on possible reasons for this. We demonstrate that the error budget for relatively cooler exoplanets is severely reduced in comparison to hotter exoplanets, and underline need for further work in context of high-resolution spectroscopy.

astro-ph.EP↗

arXiv2025

Performance of the Stellar Abundances and atmospheric Parameters Pipeline adapted for M dwarfs I. Atmospheric parameters from the spectroscopic module

M dwarfs are important targets in the search for Earth-like exoplanets due to their small masses and low luminosities. Several ongoing and upcoming space missions are targeting M dwarfs for this reason, and the ESA PLATO mission is one of these. In order to fully characterise a planetary system the properties of the host star must be known. For M dwarfs we can derive effective temperature, surface gravity, metallicity, and abundances of various elements from spectroscopic observations in combination with photometric data. The Stellar Abundances and atmospheric Parameters Pipeline (SAPP) has been developed as a prototype for one of the stellar science softwares within the PLATO consortium, it is aimed at FGK stars. We have modified it to be able to analyse the M dwarf among the PLATO targets. The current version of the pipeline for M dwarfs mostly relies on spectroscopic observations. The data processing is based on the machine learning algorithm The Payne and fits a grid of model spectra to an observed spectrum to derive effective temperature and metallicity. We use spectra in the H-band, as the near-infrared region is beneficial for M dwarfs. A method based on synthetic spectra was developed for the continuum normalisation of the spectra, taking into account the pseudo-continuum formed by numerous lines of the water molecule. Photometry is used to constrain the surface gravity. We tested the modified SAPP on spectra of M dwarfs from the APOGEE survey. Our validation sample of 26 stars includes stars with interferometric observations and binaries. We found a good agreement between our values and reference values from a range of studies. The overall uncertainties in the derived effective temperature, surface gravity, and metallicity is 100 K, 0.1 dex, and 0.15 dex, respectively. We find that the modified SAPP performs well on M dwarfs and identify possible areas of future development.

astro-ph.SR↗

arXiv2023

Gaia FGK Benchmark Stars: fundamental Teff and log g of the third version

Context. Large spectroscopic surveys devoted to the study of the Milky Way, including Gaia, use automated pipelines to massively determine the atmospheric parameters of millions of stars. The Gaia FGK Benchmark Stars are reference stars with Teff and log g derived through fundamental relations, independently of spectroscopy, to be used as anchors for the parameter scale. The first and second versions of the sample have been extensively used for that purpose, and more generally to help constrain stellar models. Aims. We provide the third version of the Gaia FGK Benchmark Stars, an extended set intended to improve the calibration of spectroscopic surveys, and their interconnection. Methods. We have compiled about 200 candidates which have precise measurements of angular diameters and parallaxes. We determined their bolometric fluxes by fitting their spectral energy distribution. Masses were determined using two sets of stellar evolution models. In a companion paper we describe the determination of metallicities and detailed abundances. Results. We provide a new set of 192 Gaia FGK Benchmark Stars with their fundamental Teff and logg, and with uncertainties lower than 2% for most stars. Compared to the previous versions, the homogeneity and accuracy of the fundamental parameters are significantly improved thanks to the high quality of the Gaia data reflecting on distances and bolometric fluxes.

astro-ph.SR↗

arXiv2022

Non-LTE Radiative Transfer with Turbospectrum

Physically realistic models of stellar spectra are needed in a variety of astronomical studies, from the analysis of fundamental stellar parameters, to studies of exoplanets and stellar populations in galaxies. Here we present a new version of the widely-used radiative transfer code Turbospectrum, which we update with the capacity to perform spectrum synthesis for lines of multiple chemical elements in Non-Local Thermodynamic Equilibrium (NLTE). We use the code in the analysis of metallicites and abundances of the Gaia FGK benchmark stars, using one-dimensional MARCS atmospheric models and the averages of 3D radiation-hydrodynamics simulations of stellar surface convection. We show that the new more physically realistic models offer a better description of the observed data and make the program and the associated microphysics data publicly available, including grids of NLTE departure coefficients for H, O, Na, Mg, Si, Ca, Ti, Mn, Fe, Co, Ni, Sr, and Ba.

astro-ph.SR↗

arXiv2022

Observational constraints on the origin of the elements. IV: The standard composition of the Sun

The chemical composition of the Sun is requested in the context of various studies in astrophysics, among them in the calculation of the standard solar models (SSMs), which describe the evolution of the Sun from the pre-main-sequence to its present age. In this work, we provide a critical re-analysis of the solar chemical abundances and corresponding SSMs. For the photospheric values, we employ new high-quality solar observational data collected with the IAG facility, state-of-the art non-equilibrium modelling, new oscillator strengths, and different atmospheric models, including the MARCS model, but also averages based on Stagger and CO5BOLD 3D radiation-hydrodynamics simulations of stellar convection. We perform new calculations of oscillator strengths for transitions in O I and N I. For O I - the critical element for the interior models - calculations are carried out using several independent methods. We find unprecedented agreement between the new estimates of transition probabilities, thus supporting our revised solar oxygen abundance. We also provide new estimates of the noble gas Ne abundance. We investigate our results in comparison with the previous estimates. We discuss the consistency of our photospheric measurements with meteoritic values taking into account systematic and correlated errors. Finally, we provide revised chemical abundances, leading to a new value of the solar photospheric present-day metallicity $Z/X = 0.0225$, and employ them in the calculations of the SSM. We find that the puzzling mismatch between the helioseismic constraints on the solar interior structure and the model is resolved with the new chemical composition.

astro-ph.SR↗

arXiv2022

The SAPP pipeline for the determination of stellar abundances and atmospheric parameters of stars in the core program of the PLATO mission

We introduce the SAPP (Stellar Abundances and atmospheric Parameters Pipeline), the prototype of the code that will be used to determine parameters of stars observed within the core program of the PLATO space mission. The pipeline is based on the Bayesian inference and provides effective temperature, surface gravity, metallicity, chemical abundances, and luminosity. The code in its more general version can have a much wider range of applications. It can also provide masses, ages, and radii of stars and can be used for stars of stellar types not targeted by the PLATO core program, such as red giants. We validate the code on a set of 27 benchmark stars that includes 19 FGK-type dwarfs, 6 GK-type sub-giants, and 2 red giants. Our results suggest that combining various observables is the optimal approach, as it allows to break degeneracies between different parameters and yields more accurate values of stellar parameters and more realistic uncertainties. For the PLATO core sample, we obtain a typical uncertainty of 27 ($\rm{syst.}$) $\pm$ 37 ($\rm{stat.}$) K for T$_{\rm{eff}}$, 0.00 $\pm$ 0.01 dex for log$g$, 0.02 $\pm$ 0.02 dex for metallicity [Fe/H], -0.01 $\pm$ 0.03 R$_\odot$ for radii, -0.01 $\pm$ 0.05 M$_\odot$ for stellar masses, and -0.14 $\pm$ 0.63 Gyrs for ages. We also show that the best results are obtained by combining the $ν_{max}$ scaling relation and stellar spectra. This resolves the notorious problem of degeneracies, which is particularly important for F-type stars.

astro-ph.SR↗

arXiv2021

Atomic diffusion and mixing in old stars VII. Abundances of Mg, Ti, and Fe in M30

We attempt to constrain the efficiency of additional transport or mixing processes that reduce the effect of atomic diffusion in stellar atmospheres. We apply spectral synthesis methods to spectra observed with the GIRAFFE spectrograph on the VLT to estimate abundances of Mg, Ti, Fe, and Ba in stars in the metal-poor globular cluster M30. To the abundances we fit trends of abundances predicted by stellar evolution models assuming different efficiencies of additional transport or mixing processes. The fitting procedure attempts to take into account the effects of parameter-dependent systematic errors in the derived abundances. We find that the parameter $T_0$, which describes the efficiency of additional transport or mixing processes, can almost certainly be constrained to the narrow range $\log_{10}{\left( T_0 / \left[ \mathrm{K} \right] \right)}$ between $6.09$ and $6.2$. This corresponds to decreased abundances for stars at the main sequence turn-off point compared to the red giant branch by $0.2\,\mathrm{dex}$ for Mg, $0.1\,\mathrm{dex}$ for Fe, and $0.07\,\mathrm{dex}$ for Ti. We also find that while our estimates do have non-negligible systematic errors stemming from the continuum placement and the assumed microturbulence, our method can take them into account. Our results partly amend the results of an earlier paper in this article series, that tentatively used a value of $\log_{10}{\left( T_0 / \left[ \mathrm{K} \right] \right)} = 6.0$ when modelling the Spite plateau of lithium. To more easily distinguish physical effects from systematic errors, we recommend that studies of this kind focus on elements for which the expected surface abundances as functions of effective temperature have a distinct structure and cover a wide range.

astro-ph.SR↗

arXiv2020

The Gaia-ESO Survey: Oxygen abundance in the Galactic thin and thick disks

We analyze the oxygen abundances of a stellar sample representative of the two major Galactic populations: the thin and thick disks. The aim is to investigate the differences between members of the Galactic disks and to contribute to the understanding on the origin of oxygen chemical enrichment in the Galaxy. The analysis is based on the [O\,{\sc i}]=6300.30\,Å~ oxygen line in HR spectra ($R\sim$52,500) obtained from the GES Survey. By comparing the observed spectra with a theoretical dataset, computed in LTE with the SPECTRUM synthesis and ATLAS12 codes, we derive the oxygen abundances of 516 FGK dwarfs for which we have previously measured carbon abundances. Based on kinematic, chemical and dynamical considerations we identify 20 thin and 365 thick disk members. We study potential trends of both subsamples in terms of their chemistry ([O/H], [O/Fe], [O/Mg], and [C/O] versus [Fe/H] and [Mg/H]), age, and position in the Galaxy. Main results are: (a) [O/H] and [O/Fe] ratios versus [Fe/H] show systematic differences between thin and thick disk stars with enhanced O abundance of thick disk stars with respect to thin disk members and a monotonic decrement of [O/Fe] with increasing metallicity, even at metal-rich regime; (b) a smooth correlation of [O/Mg] with age in both populations, suggesting that this abundance ratio can be a good proxy of stellar ages within the Milky Way; (c) thin disk members with [Fe/H]$\simeq0$ display a [C/O] ratio smaller than the solar value, suggesting a possibly outward migration of the Sun from lower Galactocentric radii.

astro-ph.GA↗

arXiv2020

Atomic data for the Gaia-ESO Survey

We describe the atomic and molecular data that were used for the abundance analyses of FGK-type stars carried out within the Gaia-ESO Survey. We present an unprecedented effort to create a homogeneous line list, which was used by several abundance analysis groups to calculate synthetic spectra and equivalent widths. The atomic data are accompanied by quality indicators and detailed references to the sources. The atomic and molecular data are made publicly available in electronic form. In general experimental transition probabilities were preferred but theoretical values were also used. Astrophysical gf-values were avoided due to the model-dependence of such a procedure. For elements whose lines are significantly affected by hyperfine structure or isotopic splitting a concerted effort has been made to collate the necessary data for the individual line components. We also performed a detailed investigation of available data for line broadening due to collisions with neutral hydrogen atoms. Synthetic spectra calculated for the Sun and Arcturus were used to assess the blending properties of the lines. Among a subset of over 1300 lines of 35 elements in the wavelength ranges from 475 nm to 685 nm and from 850 nm to 895 nm we identified about 200 lines of 24 species which have accurate gf-values and are free of blends in the spectra of the Sun and Arcturus. For the broadening due to collisions with neutral hydrogen we recommend data based on Anstee-Barklem-O'Mara theory, where available, and to avoid lines of neutral species otherwise. Theoretical broadening data by R.L. Kurucz should be used for Sc II, Ti II, and Y II lines. For ionised rare-earth species the Unsöld approximation with an enhancement factor of 1.5 for the line width can be used. Desirable improvements in atomic data were identified for a number of species, including Al I, S I, Cr II, Na I, Si I, Ca II, and Ni I.

astro-ph.IM↗

arXiv2020

GaiaNIR: Combining optical and Near-Infra-Red (NIR) capabilities with Time-Delay-Integration (TDI) sensors for a future Gaia-like mission

ESA recently called for new "Science Ideas" to be investigated in terms of feasibility and technological developments -- for technologies not yet sufficiently mature. These ideas may in the future become candidates for M or L class missions within the ESA Science Program. With the launch of Gaia in December 2013, Europe entered a new era of space astrometry following in the footsteps of the very successful Hipparcos mission from the early 1990s. Gaia is the successor to Hipparcos, both of which operated in optical wavelengths, and Gaia is two orders of magnitude more accurate in the five astrometric parameters and is surveying four orders of magnitude more stars in a vast volume of the Milky Way. The combination of the Hipparcos/Tycho-2 catalogues with the first early Gaia data release will give improved proper motions over a long ~25 year baseline. The final Gaia solution will also establish a new optical reference frame by means of quasars, by linking the optical counterparts of radio (VLBI) sources defining the orientation of the reference frame, and by using the zero proper motion of quasars to determine a non-rotating frame. A weakness of Gaia is that it only operates at optical wavelengths. However, much of the Galactic centre and the spiral arm regions, important for certain studies, are obscured by interstellar extinction and this makes it difficult for Gaia to deeply probe. Traditionally, this problem is overcome by switching to the infra-red but this was not possible with Gaia's CCDs. Additionally, to scan the entire sky and make global absolute parallax measurements the spacecraft must have a constant rotation and this requires that the CCDs operate in TDI mode, increasing their complexity.

astro-ph.IM↗

arXiv2019

The Gaia-ESO Survey: Carbon abundance in the Galactic thin and thick disks

This paper focuses on carbon that is one of the most abundant elements in the Universe and is of high importance in the field of nucleosynthesis and galactic and stellar evolution. Even nowadays, the origin of carbon and the relative importance of massive and low- to intermediate-mass stars in producing it is still a matter of debate. In this paper we aim at better understanding the origin of carbon by studying the trends of [C/H], [C/Fe],and [C/Mg] versus [Fe/H], and [Mg/H] for 2133 FGK dwarf stars from the fifth Gaia-ESO Survey internal data release (GES iDR5). The availability of accurate parallaxes and proper motions from Gaia DR2 and radial velocities from GES iDR5 allows us to compute Galactic velocities, orbits and absolute magnitudes and, for 1751 stars, ages via a Bayesian approach. Three different selection methodologies have been adopted to discriminate between thin and thick disk stars. In all the cases, the two stellar groups show different abundance ratios, [C/H], [C/Fe], and [C/Mg], and span different age intervals, with the thick disk stars being, on average, older than those in the thin disk. The behaviours of [C/H], [C/Fe], and [C/Mg] versus [Fe/H], [Mg/H], and age all suggest that C is primarily produced in massive stars like Mg. The increase of [C/Mg] for young thin disk stars indicates a contribution from low-mass stars or the increased C production from massive stars at high metallicities due to the enhanced mass loss. The analysis of the orbital parameters Rmed and |Zmax| support an "inside-out" and "upside-down" formation scenario for the disks of Milky Way.

astro-ph.SR↗

arXiv2018

Accuracy and precision of industrial stellar abundances

There has been an incredibly large investment in obtaining high-resolution stellar spectra for determining chemical abundances of stars. This information is crucial to answer fundamental questions in Astronomy by constraining the formation and evolution scenarios of the Milky Way as well as the stars and planets residing in it. We have just entered a new era, in which chemical abundances of FGK-type stars are being produced at industrial scales, where the observations, reduction, and analysis of the data are automatically performed by machines. Here we review the latest human efforts to assess the accuracy and precision of such industrial abundances by providing insights in the steps and uncertainties associated with the process of determining stellar abundances. To do so, we highlight key issues in the process of spectral analysis for abundance determination, with special effort in disentangling sources of uncertainties. We also provide a description of current and forthcoming spectroscopic surveys, focusing on their reported abundances and uncertainties. This allows us to identify which elements and spectral lines are best and why. Finally, we make a brief selection of main scientific questions the community is aiming to answer with abundances.

astro-ph.SR↗

arXiv2018

The Gaia FGK benchmark stars version 2.1

The Gaia FGK benchmark stars are among the preferred samples of reference stars to test parametrisation pipelines of spectroscopic surveys. They consist of a small but carefully selected sample whose parameters are derived consistently and homogeneously. Here we summarise this work and provide our current list of stars with associated parameters which are recommended for validation and calibration purposes for stellar surveys. Data available at CDS as catalog III/281.

astro-ph.SR↗

arXiv2017

Gaia FGK benchmark stars: a bridge between spectroscopic surveys

The Gaia benchmark stars (GBS) are very bright stars of different late spectral types, luminosities and metallicities. They are well-known in the Galactic archaeology community because they are widely used to calibrate and validate the automatic pipelines delivering parameters of on-going and future spectroscopic surveys. The sample provides us with consistent fundamental parameters as well as a library of high resolution and high signal-to-noise spectra. This allows the community to study details of high resolution spectroscopy and to compare results between different survey pipelines, putting the GBS at the heart of this community. Here we discuss some results arising from using the GBS as main data source for spectral analyses.

astro-ph.SR↗

arXiv2017

Metallicity determination of M dwarfs - Expanded parameter range in metallicity and effective temperature

Context. Reliable metallicity values for M dwarfs are important for studies of the chemical evolution and advancement of planet formation theory in low-mass environments. Historically the determination of stellar parameters of low-mass stars has been challenging due to the low surface temperature, causing several molecules to form in the photospheric layers. In our work we use the fact that infrared high-resolution spectrographs have opened up a new window for investigating M dwarfs. Aims. Metallicity determination using high-resolution spectra is more accurate than the use of low-resolution spectra, but rather time-consuming. In this paper we expand our sample analyzed with this precise method both in metallicity and effective temperature in order to build up a calibration sample for a future revised empirical calibration. Methods. Because of the relatively few molecular lines in the J-band, continuum rectification is possible for high-resolution spectra, allowing the stellar parameters to be determined with greater accuracy than using optical spectra. The metallicity was determined using synthetic spectral fitting of several atomic species. Results. We have analyzed sixteen targets, with a range of effective temperature from 3350-4550 K. The resulting metallicities lie between -0.5 < [M/H] < +0.4. A few targets have previously been analyzed using low-resolution spectra, and we find a rather good agreement with our values. A comparison with available photometric calibrations shows varying agreement, and the spread within all empirical calibrations is large. Conclusions. Including the targets from our previous paper, we have analyzed 28 M dwarfs using high-resolution infrared spectra. The targets spread approximately one dex in metallicity and 1400 K in effective temperature. For individual M dwarfs we achieve uncertainties of 0.05 dex and 100 K on average.

astro-ph.SR↗