Searcharxiv⌕ Search

arXiv subjects

Ulrike Heiter

Publications and source records attributed to Ulrike Heiter.

25 records · Page 2Linked to original sources

A Comparison of Stellar Elemental Abundance Techniques and Measurements

Stellar elemental abundances are important for understanding the fundamental properties of a star or stellar group, such as age and evolutionary history, as well as the composition of an orbiting planet. However, as abundance measurement techniques have progressed, there has been little standardization between individual methods and their comparisons. As a result, different stellar abundance procedures determine measurements that vary beyond quoted error for the same elements within the same stars (Hinkel et al. 2014). The purpose of this paper is to better understand the systematic variations between methods and offer recommendations for producing more accurate results in the future. We have invited a number of participants from around the world (Australia, Portugal, Sweden, Switzerland, and USA) to calculate ten element abundances (C, O, Na, Mg, Al, Si, Fe, Ni, Ba, and Eu) using the same stellar spectra for four stars (HD361, HD10700, HD121504, HD202206). Each group produced measurements for each of the stars using: 1) their own autonomous techniques, 2) standardized stellar parameters, 3) standardized line list, and 4) both standardized parameters and line list. We present the resulting stellar parameters, absolute abundances, and a metric of data similarity that quantifies homogeneity of the data. We conclude that standardization of some kind, particularly stellar parameters, improves the consistency between methods. However, because results did not converge as more free parameters were standardized, it is clear there are inherent issues within the techniques that need to be reconciled. Therefore, we encourage more conversation and transparency within the community such that stellar abundance determinations can be reproducible as well as accurate and precise.

astro-ph.SR↗

Gaia FGK Benchmark Stars: New Candidates At Low-Metallicities

We have entered an era of large spectroscopic surveys in which we can measure, through automated pipelines, the atmospheric parameters and chemical abundances for large numbers of stars. Calibrating these survey pipelines using a set of "benchmark stars" in order to evaluate the accuracy and precision of the provided parameters and abundances is of utmost importance. The recent proposed set of Gaia FGK benchmark stars of Heiter et al. (2015) has no recommended stars within the critical metallicity range of $-2.0 <$ [Fe/H] $< -1.0$ dex. In this paper, we aim to add candidate Gaia benchmark stars inside of this metal-poor gap. We began with a sample of 21 metal-poor stars which was reduced to 10 stars by requiring accurate photometry and parallaxes, and high-resolution archival spectra. The procedure used to determine the stellar parameters was similar to Heiter et al. (2015) and Jofre et al. (2014) for consistency. The effective temperature (T$_{\mathrm{eff}}$) of all candidate stars was determined using the Infrared Flux Method utilizing multi-band photometry. The surface gravity (log g) was determined through fitting stellar evolutionary tracks. The [Fe/H] was determined using four different spectroscopic methods fixing the T$_{\mathrm{eff}}$ and log g from the values determined independent of spectroscopy. We discuss, star-by-star, the quality of each parameter including how it compares to literature, how it compares to a spectroscopic run where all parameters are free, and whether Fe I ionisation-excitation balance is achieved. From the 10 stars, we recommend a sample of five new metal-poor benchmark candidate stars which have consistent T$_{\mathrm{eff}}$ , log g, and [Fe/H] determined through several means. These stars can be used for calibration and validation purpose of stellar parameter and abundance pipelines and should be of highest priority for future interferometric studies.

astro-ph.SR↗

Metallicity determination of M dwarfs - High-resolution IR spectroscopy

Context. Several new techniques to determine the metallicity of M dwarfs with better precision have been developed over the last decades. However, most of these studies were based on empirical methods. In order to enable detailed abundance analysis, standard methods established for warmer solar-like stars, i.e. model-dependent methods using fitting of synthetic spectra, still need to be used. Aims. In this work we continue the reliability confirmation and development of metallicity determinations of M dwarfs using high- resolution infrared spectra. The reliability was confirmed though analysis of M dwarfs in four binary systems with FGK dwarf companions and by comparison with previous optical studies of the FGK dwarfs. Methods. The metallicity determination was based on spectra taken in the J band (1.1-1.4 μm) with the CRIRES spectrograph. In this part of the infrared, the density of stellar molecular lines is limited, reducing the amount of blends with atomic lines enabling an accurate continuum placement. Lines of several atomic species were used to determine the stellar metallicity. Results. All binaries show excellent agreement between the derived metallicity of the M dwarf and its binary companion. Our results are also in good agreement with values found in the literature. Furthermore, we propose an alternative way to determine the effective temperature of M dwarfs of spectral types later than M2 through synthetic spectral fitting of the FeH lines in our observed spectra. Conclusions. We have confirmed that a reliable metallicity determination of M dwarfs can be achieved using high-resolution infrared spectroscopy. We also note that metallicites obtained with photometric metallicity calibrations available for M dwarfs only partly agree with the results we obtain from high-resolution spectroscopy.

astro-ph.SR↗

Gaia FGK Benchmark Stars and their reference parameters

In this article we summarise on-going work on the so-called Gaia FGK Benchmark Stars. This work consists of the determination of their atmospheric parameters and of the construction of a high-resolution spectral library. The definition of such a set of reference stars has become crucial in the current era of large spectroscopic surveys. Only with homogeneous and well documented stellar parameters can one exploit these surveys consistently and understand the structure and history of the Milky Way and therefore other of galaxies in the Universe.

astro-ph.GA↗

M-dwarf metallicities - A high-resolution spectroscopic study in the near infrared

The relativley large spread in the derived metallicities ([Fe/H]) of M dwarfs shows that various approaches have not yet converged to consistency. The presence of strong molecular features, and incomplete line lists for the corresponding molecules have made metallicity determinations of M dwarfs difficult. Furthermore, the faint M dwarfs require long exposure times for a signal-to-noise ratio sufficient for a detailed spectroscopic abundance analysis. We present a high-resolution (R~50,000) spectroscopic study of a sample of eight single M dwarfs and three wide-binary systems observed in the infrared J-band. The absence of large molecular contributions allow for a precise continuum placement. We derive metallicities based on the best fit synthetic spectra to the observed spectra. To verify the accuracy of the applied atmospheric models and test our synthetic spectrum approach, three binary systems with a K-dwarf primary and an M-dwarf companion were observed and analysed along with the single M dwarfs. We obtain a good agreement between the metallicities derived for the primaries and secondaries of our test binaries and thereby confirm the reliability of our method of analysing M dwarfs. Our metallicities agree well with certain earlier determinations, and deviate from others. We conclude that spectroscopic abundance analysis in the J band is a reliable method for establishing the metallicity scale for M dwarfs. We recommend its application to a larger sample covering lower as well as higher metallicities. Further prospects of the method include abundance determinations for individual elements.

astro-ph.SR↗

Observation and modelling of dusty, low gravity L, and M dwarfs

Observational facilities allow now the detection of optical and IR spectra of young M- and L-dwarfs. This enables empirical comparisons with old M- and L- dwarfs, and detailed studies in comparison with synthetic spectra. While classical stellar atmosphere physics seems perfectly appropriate for old M-dwarfs, more physical and chemical processes, cloud formation in particular, needs to be modelled in the substellar regime to allow a detailed spectral interpretation. Not much is known so far about the details of the inset of cloud formation at the spectral transition region between M and L dwarfs. Furthermore there is observational evidence for diversity in the dust properties of objects having the same spectral type. Do we understand these differences? The question is also how young M- and L-dwarfs need to be classified, which stellar parameter do they have and whether degenerations in the stellar parameter space due to the changing atmosphere physics are present, like in the L-T transition region. The Splinter was driven by these questions which we will use to encourage interactions between observation and theory. Given the recent advances, both in observations and spectral modelling, an intensive discussion between observers and theoreticians will create new synergies in our field.

astro-ph↗

The radii of the nearby K5V and K7V stars 61 Cyg A & B - CHARA/FLUOR interferometry and CESAM2k modeling

Context: The main sequence binary star 61 Cyg (K5V+K7V) is our nearest stellar neighbour in the northern hemisphere. This proximity makes it a particularly well suited system for very high accuracy interferometric radius measurements. Aims: Our goal is to constrain the poorly known evolutionary status and age of this bright binary star. Methods: We obtained high accuracy interferometric observations in the infrared K' band, using the CHARA/FLUOR instrument. We then computed evolutionary models of 61 Cyg A & B with the CESAM2k code. As model constraints, we used a combination of observational parameters from classical observation methods (photometry, spectroscopy) as well as our new interferometric radii. Results: The measured limb darkened disk angular diameters are theta_LD(A) = 1.775 +/- 0.013 mas and theta_LD(B) = 1.581 +/- 0.022 mas, respectively for 61 Cyg A and B. Considering the high accuracy parallaxes available, these values translate into photospheric radii of R(A) = 0.665 +/- 0.005 Rsun and R(B) = 0.595 +/- 0.008 Rsun. The new radii constrain efficiently the physical parameters adopted for the modeling of both stars, allowing us to predict asteroseismic frequencies based on our best-fit models. Conclusions: The CESAM2k evolutionary models indicate an age around 6 Gyrs and are compatible with small values of the mixing length parameter. The measurement of asteroseismic oscillation frequencies in 61 Cyg A & B would be of great value to improve the modeling of this important fiducial stellar system, in particular to better constrain the masses.

astro-ph↗