SearcharxivSearch

arXiv subjects

V. Couderc

Publications and source records attributed to V. Couderc.

17 recordsLinked to original sources

Negative absolute temperature attractor in a dense photon gas

Statistical mechanics permits to connect the macroscopic properties of matter with the laws governing the evolution of its microscopic constituents. Such an approach has been very successful for systems of particles governed by either classical or quantum mechanics. In a classical gas, different thermodynamic laws apply to the weakly or strongly interacting particles of an ideal or real gas, respectively. Here, we demonstrate that a similar situation occurs for a gas of photons, which is contained in a finite-dimensional box such as a multimode waveguide. We use a few-mode system provided by a standard step-index fiber operated below cutoff, which permits to prepare a high-density gas of photons. We show that, owing to the attractive potential energy contribution to the photon energy induced by the nonlinear Kerr effect, the mode population exhibits a spontaneous inversion from the fundamental to the highest-order mode, as the input laser beam power grows larger. This inversion of the mode power distribution leads to a stable attractor for the output beam, and is associated with a progressive increase of the optical temperature until a flip of its sign leads to a new regime of negative absolute temperatures. Our work demonstrates the ability to all-optically control the shape of laser beams, which is a prerequisite for applications in high-power laser sources, nonlinear imaging, and optical communication systems.

physics.optics

Spatial Division Multiplexing for Multiplex Coherent Anti-Stokes Raman Scattering

We demonstrate how a narrowband pump and a broadband spectrum can be spatially multiplexed by selective coupling them in two distinct modes of a few-mode microstructure fiber. The first mode carries most of the input pump energy, and experiences spectral broadening. Whereas the second mode preserves the narrow bandwidth of the remaining part of the pump. Bimodal propagation, with a power unbalance strongly in favor of the fundamental mode, is naturally obtained by maximizing coupling into the fundamental mode of the fiber. At the fiber output, the nearly monochromatic beam and the supercontinuum carried by the two different modes are combined by a microscope objective, and used as a pump and a Stokes wave for self-referenced multiplex coherent anti-Stokes Raman scattering micro-spectroscopy. The spectral resolution, the signal-to-noise-ratio, and the possible amplification of the remaining pump beam are discussed.

physics.optics

Multiphoton ionization of standard optical fibers

Atoms ionization by the simultaneous absorption of multiple photons has found applications in fiber optics, where it leads to unique nonlinear phenomena. To date, studies of the ionization regime have been limited to gas-filled hollow-core fibers. Here, we investigate multiphoton ionization of standard optical fibers, where intense laser pulses ionize the atoms constituting the fiber structure itself, instead of that of the filling gas. We characterize material modifications produced by optical breakdown. Their formation affects laser beam dynamics over hours long temporal scales. The damage features are studied by means of optical microscopy and X-ray microtomography. In the framework of glass photonics, our results pave the way for a novel glass waveguide micromachining technique.

physics.optics

Statistical mechanics of beam self-cleaning in GRIN multimode optical fibers

Since its first demonstration in graded-index multimode fibers, spatial beam self-cleaning has attracted a growing research interest. It allows for the propagation of beams with a bell-shaped spatial profile, thus enabling the use of multimode fibers for several applications, from biomedical imaging to high-power beam delivery. So far, beam self-cleaning has been experimentally studied under several different experimental conditions. Whereas it has been theoretically described as the irreversible energy transfer from high-order modes towards the fundamental mode, in analogy with a beam condensation mechanism. Here, we provide a definitive theoretical description of beam self-cleaning, by means of a semi-classical statistical mechanics model of wave thermalization. This approach is confirmed by an extensive experimental characterization, based on a holographic mode decomposition technique, employing laser pulses with temporal durations ranging from femtoseconds up to nanoseconds. An excellent agreement between theory and experiments is found, which demonstrates that beam self-cleaning can be fully described in terms of the basic conservation laws of statistical mechanics.

physics.optics

Frequency-Resolved Spatial Beam Mapping in Multimode Fibers: Application to Mid-Infrared Supercontinuum Generation

We present a new spatial-spectral mapping technique permitting to measure the beam intensity at the output of a graded-index (GRIN) multimode fiber with sub-nanometric spectral resolution. We apply this method to visualize the fine structure of the beam shape of a sideband generated at 1870 nm by geometric parametric instability (GPI) in a GRIN fiber. After spatial-spectral characterization, we amplify the GPI sideband with a Tm-doped fiber amplifier to obtain a microjoule-scale picosecond pump whose spectrum is finally broadened in a segment of InF3 optical fiber to achieve supercontinuum ranging from 1.7 μm up to 3.4 μm

physics.optics

Giving light a new twist with standard optical fibres: rainbow Archimedean spiral emission

We demonstrate a new practical approach for generating multicolour spiral-shaped beams. It makes use of a standard silica optical fibre, combined with a titled input laser beam. The resulting breaking of the fibre axial symmetry leads to the propagation of a helical beam. The associated output far-field has spiral shape, independently of the input laser power value. Whereas, with a high-power near-infrared femtosecond laser, a visible supercontinuum spiral emission is generated. With appropriate control of the input laser coupling conditions, the colours of the spiral spatially self-organize in a rainbow distribution. Our method is independent of the laser source wavelength and polarization. Therefore, standard optical fibres may be used for generating spiral beams in many applications, ranging from communications to optical tweezers and quantum optics.

physics.optics

3D time-domain beam mapping for studying nonlinear dynamics in multimode optical fibers

The characterization of the complex spatiotemporal dynamics of optical beam propagation in nonlinear multimode fibers requires the development of advanced measurement methods, capable of capturing the real-time evolution of beam images. We present a new space-time mapping technique, permitting the direct detection, with picosecond temporal resolution, of the intensity from repetitive laser pulses over a grid of spatial samples from a magnified image of the output beam. By using this time-resolved mapping, we provide the first unambiguous experimental observation of instantaneous intrapulse nonlinear coupling processes among the modes of a graded index fiber.

physics.optics

Multiphoton absorption excited upconversion luminescence in optical fiber

We experimentally demonstrate a novel nonlinear effect in optical fibers: upconversion luminescence generation excited by multiphoton absorption of femtosecond infrared pulses. We directly estimate the average number of photons involved in the up-conversion process, by varying the wavelength of the pump source. We highlight the role of non-bridging oxygen hole centers and oxygen deficient center defects, and directly compare the intensity of side-scattered luminescence with numerical simulations of pulse propagation.

physics.optics

Spatial beam self-cleaning in tapered Yb-doped GRIN multimode fiber with decelerating nonlinearity

We experimentally demonstrate spatial beam self-cleaning in an Yb-doped graded-index multimode fiber taper, both in passive and active configurations. The input laser beam at 1064 nm was injected for propagation from the small to the large core side of the taper, with laser diode pumping in a counterdirectional configuration. The Kerr effect permits to obtain high-beam quality amplification with no accompanying frequency conversions. As a result, our nonlinear taper amplifier may provide an important building block for multimode fiber lasers and amplifiers.

physics.optics

Spatial Beam Self-Cleaning and Supercontinuum Generation with Yb-doped Multimode Graded-Index Fiber Taper Based on Accelerating Self-Imaging and Dissipative Landscape

We experimentally demonstrate spatial beam self-cleaning and supercontinuum generation in a tapered Ytterbium-doped multimode optical fiber with parabolic core refractive index and doping profile when 1064 nm pulsed beams propagate from wider (120 micrometers) into smaller (40 micrometers) diameter. In the passive mode, increasing the input beam peak power above 20 kW leads to a bell-shaped output beam profile. In the active configuration, gain from the pump laser diode permits to combine beam self-cleaning with supercontinuum generation between 520-2600 nm. By taper cut-back, we observed that the dissipative landscape i.e., a non-monotonic variation of the average beam power along the MMF leads to modal transitions of self-cleaned beams along the taper length.

physics.optics

Wavefront shaping for optimized many-mode Kerr beam self-cleaning in graded-index multimode fiber

We report experimental results, showing that the Kerr beam self-cleaning of many low-order modes in a graded-index multimode fiber can be controlled thanks to optimized wavefront shaping of the coherent excitation beam. Adaptive profiling of the transverse input phase was utilized for channeling the launched power towards a specific low-order fiber mode, by exploiting nonlinear coupling among all guided modes. Experiments were carried out with 7 ps pulses at 1064 nm injected in a five meters long multimode fiber operating in the normal dispersion regime. Optimized Kerr beam self-cleaning of five different LP modes is reported, with a power threshold that increases with the mode order.

physics.optics

Kerr beam self-cleaning in the multimode fiber anomalous dispersion regime

We experimentally demonstrate Kerr beam self-cleaning in the anomalous dispersion regime of graded-index multimode optical fibers. By using 90 ps duration, highly chirped (2 nm bandwidth at -3dB) optical pulses at 1562 nm, we demonstrate a 2 decades reduction, with respect to previous experiments in the normal dispersion regime, of threshold peak power for beam self-cleaning into the fundamental mode of the fiber, accompanied by more than 65% nonlinear increase of intensity correlation into the fundamental mode. Highly efficient self-selection of the LP11 mode is also observed. Self-cleaned beams remain spatio-temporally stable for more than a decade of variation of the peak pulse power.

physics.optics

Kerr beam self-cleaning on the $LP_{11}$ mode in graded-index multimode fiber

We report the experimental observation of Kerr beam self-cleaning in a graded-index multimode fiber, leading to output beam profiles different from a bell shape, close to the $LP_{01}$ mode. For specific coupling conditions, nonlinear coupling among the guided modes can reshape the output speckle pattern generated by a pulsed beam into the low order $LP_{11}$ mode. This was observed in a few meters long multimode fiber with 750 ps pulses at 1064 nm in the normal dispersion regime. The power threshold for $LP_{11}$ mode self-cleaning was about three times larger than that required for Kerr nonlinear self- cleaning into the $LP_{01}$ mode.

physics.optics

Interplay of Kerr and Raman beam cleaning with a multimode microstructure fiber

We experimentally study the competition between Kerr beam self-cleaning and Raman beam cleanup in a multimode air-silica microstructure optical fiber. Kerr beam self-cleaning of the pump is observed for a certain range of input powers only. Raman Stokes beam generation and cleanup lead to both depletion and degradation of beam quality for the pump. The interplay of modal four-wave mixing and Raman scattering in the infrared domain lead to the generation of a multimode supercontinuum ranging from 500 nm up to 1800 nm.

physics.optics

Seeded intermodal four-wave mixing in a highly multimode fiber

We experimentally and theoretically investigate the process of seeded intermodal four-wave mixing in a graded index multimode fiber, pumped in the normal dispersion regime. By using a fiber with a 100 micron core diameter, we generate a parametric sideband in the C band (1530-1565 nm), hence allowing the use of an Erbium-based laser to seed the mixing process. To limit nonlinear coupling between the pump and the seed to low-order fiber modes, the waist diameter of the pump beam is properly adjusted. We observe that the superimposed seed stimulates the generation of new spectral sidebands. A detailed characterization of the spectral and spatial properties of these sidebands shows good agreement with theoretical predictions from the phase-matching conditions. Interestingly, we demonstrate that both the second and the fourth-order dispersions must be included in the phase matching conditions to get better agreement with experimental measurements. Furthermore, temporal measurements performed with a fast photodiode reveal the generation of multiple pulse structures.

physics.optics

Spatiotemporal Characterization of Supercontinuum Extending from the Visible to the Mid-Infrared in Multimode Graded-Index Optical Fiber

We experimentally demonstrate that pumping a graded-index multimode fiber with sub-ns pulses from a microchip Nd:YAG laser leads to spectrally flat supercontinuum generation with a uniform bell-shaped spatial beam profile extending from the visible to the mid-infrared at 2500\,nm. We study the development of the supercontinuum along the multimode fiber by the cut-back method, which permits us to analyze the competition between the Kerr-induced geometric parametric instability and stimulated Raman scattering. We also performed a spectrally resolved temporal analysis of the supercontinuum emission.

physics.optics

Integration of Micro-Electro-Mechanical Deformable Mirrors in Doped Fiber Amplifiers

We present a simple technique to produce active Q-switching in various types of fiber amplifiers by active integration of an electrostatic actuated deformable metallic micro-mirror. The optical MEMS (MOEMS) device acts as one of the laser cavity reflectors and, at the same time, as switching/ modulator element. We aim to obtain laser systems emitting short, high-power pulses and having variable repetition rate. The electro-mechanical behavior of membrane (bridge-type) was simulated by using electrostatic and modal 3D finite element analysis (FEA). The results of the simulations fit well with the experimental mechanical, electrical and thermal measurements of the components. In order to decrease the sensitiveness to fiber-mirror alignment we are developing novel optical devices based on stressed-metal cantilever-type geometry that allow deflections up to 50 $μ$m with increased reflectivity discrimination during actuation.

cs.OH