arXiv subjects

Vaidotas Miseikis

Publications and source records attributed to Vaidotas Miseikis.

At least 19 recordsLinked to original sources

arXiv2026

Scanning Gate Microscopy Modulation of Supercurrent in Graphene Josephson Junctions

Graphene Josephson junctions represent an excellent platform for quantum technologies, thanks to the combination of high carrier mobility, ballistic transport, and large gate-tunable critical currents, preserved even under quantizing magnetic fields. Investigating the spatial distribution of supercurrent flow could be crucial for elucidating transport mechanisms and advancing the engineering of these devices. In this work, we employ a Scanning Gate Microscope to investigate supercurrent transport in hBN-encapsulated graphene Josephson junctions contacted by Niobium leads. We study the supercurrent modulation as a function of the applied tip voltage bias and tip-to-sample distance, and provide a complete characterization of the tip-induced modulation. Our experimental results are quantitatively consistent with numerical simulations and pave the way towards local mapping and manipulation of gate-tunable superconducting phenomena with unprecedented spatial resolution.

cond-mat.mes-hall↗

arXiv2026

Graphene Josephson diodes from inherent asymmetric disorder

Josephson diodes are non-reciprocal superconducting devices characterized by different switching currents depending on the current flow direction. They recently attracted considerable theoretical and experimental attention, in view of their possible application as rectifying elements in the field of superconducting electronics, and as probes to investigate symmetry breaking mechanisms in mesoscopic systems. In this work, we show that graphene Josephson junctions provide rectification of supercurrent with an efficiency exceeding 20%. The effect appears applying a mT out-of-plane magnetic field and is enhanced close to the nodes of the Fraunhofer interference pattern. Our theoretical model identifies long-range scattering potentials in the junction as the symmetry-breaking mechanism, which yields supercurrent rectification in highly transparent junctions. While graphene stands as an ultra-clean transmission medium, our work shows that unavoidable residual disorder in a clean two-dimensional system is sufficient to promote this effect. Tailoring of the inversion (mirror) symmetry breaking could be obtained via proper design of external gates.

cond-mat.supr-con↗

arXiv2025

Quasi-$Φ_0$-periodic supercurrent at quantum Hall transitions

The combination of superconductivity and quantum Hall (QH) effect is regarded as a key milestone in advancing topological quantum computation in solid-state systems. Recent quantum interference studies suggest that QH edge states can effectively mediate a supercurrent across high-quality graphene weak links. In this work we report the observation of a supercurrent associated with transitions between adjacent QH plateaus, where transport paths develop within the compressible two-dimensional bulk. We employ a back-gated graphene Josephson junction, comprising high-mobility CVD-grown graphene encapsulated in hexagonal Boron Nitride (hBN) and contacted by Nb leads. Superconducting pockets are detected persisting beyond the QH onset, up to 2.4 T, hence approaching the upper critical field of the Nb contacts. We observe an approximate $Φ_0=h/2e$ periodicity of the QH-supercurrent as a function of the magnetic field, indicating superconducting interference in a proximitized percolative phase. These results provide a promising experimental platform to investigate the transport regime of percolative supercurrents, leveraging the flexibility of van der Waals devices.

cond-mat.mes-hall↗

arXiv2020

30$^\circ$-twisted bilayer graphene quasicrystals from chemical vapor deposition

The artificial stacking of atomically thin crystals suffers from intrinsic limitations in terms of control and reproducibility of the relative orientation of exfoliated flakes. This drawback is particularly severe when the properties of the system critically depend on the twist angle, as in the case of the dodecagonal quasicrystal formed by two graphene layers rotated by 30$^\circ$. Here we show that large-area 30$^\circ$-rotated bilayer graphene can be grown deterministically by chemical vapor deposition on Cu, eliminating the need of artificial assembly. The quasicrystals are easily transferred to arbitrary substrates and integrated in high-quality hBN-encapsulated heterostructures, which we process into dual-gated devices exhibiting carrier mobility up to $10^5$ cm$^2$/Vs. From low-temperature magnetotransport, we find that the graphene quasicrystals effectively behave as uncoupled graphene layers, showing 8-fold degenerate quantum Hall states: this result indicates that the Dirac cones replica detected by previous photo-emission experiments do not contribute to the electrical transport.

cond-mat.mes-hall↗

arXiv2020

High-speed double layer graphene electro-absorption modulator on SOI waveguide

We report on a C-band double layer graphene electro-absorption modulator on a passive SOI platform showing 29GHz 3dB-bandwith and NRZ eye-diagrams extinction ratios ranging from 1.7 dB at 10 Gb/s to 1.3 dB at 50 Gb/s. Such high modulation speed is achieved thanks to the quality of the CVD pre-patterned single crystal growth and transfer on wafer method that permitted the integration of high-quality scalable graphene and low contact resistance. By demonstrating this high-speed CVD graphene EAM modulator integrated on Si photonics and the scalable approach, we are confident that graphene can satisfy the main requirements to be a competitive technology for photonics.

physics.app-ph↗

arXiv2019

Deterministic direct growth of WS2 on CVD graphene arrays

The combination of the exciting properties of graphene with those of monolayer tungsten disulfide (WS2) makes this heterostack of great interest for electronic, optoelectronic and spintronic applications. The scalable synthesis of graphene/WS2 heterostructures on technologically attractive substrates like SiO2 would greatly facilitate the implementation of novel two-dimensional (2D) devices. In this work, we report the direct growth of monolayer WS2 via chemical vapor deposition (CVD) on single-crystal graphene arrays on SiO2. Remarkably, spectroscopic and microscopic characterization reveals that WS2 grows only on top of the graphene crystals so that the vertical heterostack is selectively obtained in a bottom-up fashion. Spectroscopic characterization indicates that, after WS2 synthesis, graphene undergoes compressive strain and hole doping. Tailored experiments show that such hole doping is caused by the modification of the SiO2 stoichiometry at the graphene/SiO2 interface during the WS2 growth. Electrical transport measurements reveal that the heterostructure behaves like an electron-blocking layer at large positive gate voltage, which makes it a suitable candidate for the development of unipolar optoelectronic components.

cond-mat.mtrl-sci↗

arXiv2019

CVD-graphene/graphene flakes dual-films as advanced DSSC counter electrodes

The use of graphene-based electrodes is burgeoning in a wide range of applications, including solar cells, light emitting diodes, touch screens, field-effect transistors, photodetectors, sensors and energy storage systems. The success of such electrodes strongly depends on the implementation of effective production and processing methods for graphene. In this work, we take advantage of two different graphene production methods to design an advanced, conductive oxide- and platinum-free, graphene-based counter electrode for dye-sensitized solar cells (DSSCs). In particular, we exploit the combination of a graphene film, produced by chemical vapor deposition (CVD) (CVD-graphene), with few-layer graphene (FLG) flakes, produced by liquid phase exfoliation. The CVD-graphene is used as charge collector, while the FLG flakes, deposited atop by spray coating, act as catalyst for the reduction of the electrolyte redox couple (i.e., I3-/I-- and Co+2/+3). The as-produced counter electrodes are tested in both I3-/I-- and Co+2/+3-based semitransparent DSSCs, showing power conversion efficiencies of 2.1% and 5.09%, respectively, under 1 SUN illumination. At 0.1 SUN, Co+2/+3-based DSSCs achieve a power conversion efficiency as high as 6.87%. Our results demonstrate that the electrical, optical, chemical and catalytic properties of graphene-based dual films, designed by combining CVD-graphene and FLG flakes, are effective alternatives to FTO/Pt counter electrodes for DSSCs for both outdoor and indoor applications.

physics.app-ph↗

arXiv2018

Fast detection of water nanopockets underneath wet-transferred graphene

We report an investigation of the graphene/substrate interface morphology in large-area polycrystalline graphene grown by chemical-vapour deposition and wet-transferred onto Si wafers. We combined spectroscopic ellipsometry, X-ray photoelectron spectroscopy and atomic-force microscopy in order to yield morphological and chemical information about the system. The data showed that wet-transferred samples may randomly exhibit nanosized relief patterns indicative of small water nanopockets trapped between graphene and the underlying substrate. These pockets affect the adhesion of graphene to the substrate, but can be efficiently removed upon a mild annealing in high vacuum. We show that ellipsometry is capable of successfully and reliably detecting, via multilayer dielectric modelling, both the presence of such a spurious intercalation layer and its removal. The fast, broadly applicable and non-invasive character of this technique can therefore promote its application for quickly and reliably assessing the degree of adhesion of graphene transferred onto target substrates, either for ex-post evaluation or in-line process monitoring.

cond-mat.mtrl-sci↗

arXiv2018

UV Light Detection from CdS Nanocrystal Sensitized Graphene Photodetectors at kHz Frequencies

We have fabricated UV-sensitive photodetectors based on colloidal CdS nanocrystals and graphene. The nanocrystals act as a sensitizer layer that improves light harvesting leading to high responsivity of the detector. Despite the slow relaxation of the photogenerated charges in the nanocrystal film, faster processes allowed to detect pulses up to a repetition rate of 2 kHz. We have performed time-resolved analysis of the processes occurring in our hybrid system, and discuss possible photo-induced charge transfer mechanisms.

cond-mat.mes-hall↗

arXiv2017

Perfecting the Growth and Transfer of Large Single-Crystal CVD Graphene: A Platform Material for Optoelectronic Applications

In this work we demonstrate the synthesis of millimetre-sized single-crystals of graphene, achievable in a commercially-available cold-wall CVD reactor, and several different approaches to transfer it from the growth substrate to a target substrate of choice. We confirm the high crystal quality of this material using various characterisation techniques, including optical and scanning electron microscopy as well as Raman spectroscopy. By performing field effect and quantum Hall effect measurements we demonstrate that the electronic properties of such single-crystals are comparable to those of ideal mechanically exfoliated flakes of graphene. Several applications of this high-quality material are also reviewed.

cond-mat.mtrl-sci↗

arXiv2016

Deterministic patterned growth of high-mobility large-crystal graphene: a path towards wafer scale integration

We demonstrate rapid deterministic (seeded) growth of large single-crystals of graphene by chemical vapour deposition (CVD) utilising pre-patterned copper substrates with chromium nucleation sites. Arrays of graphene single-crystals as large as several hundred microns are grown with a periodicity of up to 1 mm. The graphene is transferred to target substrates using aligned and contamination-free semi-dry transfer. The high quality of the synthesised graphene is confirmed by Raman spectroscopy and transport measurements, demonstrating room-temperature carrier mobility of 21 000 cm2 / V s when transferred on top of hexagonal boron nitride. By tailoring the nucleation of large single-crystals according to the desired device geometry, it will be possible to produce complex device architectures based on single-crystal graphene, thus paving the way to the adoption of CVD graphene in wafer-scale fabrication.

cond-mat.mtrl-sci↗

arXiv2016

Inter-Edge Backscattering in Buried Split-Gate-Defined Graphene Quantum Point Contacts

Quantum Hall effects offer a formidable playground for the investigation of quantum transport phenomena. Edge modes can be detected, branched, and mixed by designing a suitable potential landscape in a two-dimensional conducting system subject to a strong magnetic field. In the present work, we demonstrate a buried split-gate architecture and use it to control electron conduction in large-scale single-crystal monolayer graphene grown by chemical vapor deposition. The control of the edge trajectories is demonstrated by the observation of various fractional quantum resistances, as a result of a controllable inter-edge scattering. Experimental data are successfully modeled both numerically and within the Landauer-Buettiker formalism. Our architecture is particularly promising and unique in view of the investigation of quantum transport via scanning probe microscopy, since graphene constitutes the topmost layer of the device. For this reason, it can be approached and perturbed by a scanning probe down to the limit of mechanical contact.

cond-mat.mes-hall↗

arXiv2016

Scalable synthesis of WS2 on graphene and h-BN: an all-2D platform for light-matter transduction

By exhibiting a measurable bandgap and exotic valley physics, atomically-thick tungsten disulfide (WS2) offers exciting prospects for optoelectronic applications. The synthesis of continuous WS2 films on other two-dimensional (2D) materials would greatly facilitate the implementation of novel all-2D photoactive devices. In this work we demonstrate the scalable growth of WS2 on graphene and hexagonal boron nitride (h-BN) via a chemical vapor deposition (CVD) approach. Spectroscopic and microscopic analysis reveal that the film is bilayer-thick, with local monolayer inclusions. Photoluminescence measurements show a remarkable conservation of polarization at room temperature peaking 74% for the entire WS2 film. Furthermore, we present a scalable bottom-up approach for the design of photoconductive and photoemitting patterns.

cond-mat.mtrl-sci↗

arXiv2016

Revealing the multi-bonding state between hydrogen and graphene-supported Ti clusters

Hydrogen adsorption on graphene-supported metal clusters has brought much controversy due to the complex nature of the bonding between hydrogen and metal clusters. The bond types of hydrogen and graphene-supported Ti clusters are experimentally and theoretically investigated. Transmission electron microscopy shows that Ti clusters of nanometer-size are formed on graphene. Thermal desorption spectroscopy captures three hydrogen desorption peaks from hydrogenated graphene-supported Ti clusters. First principle calculations also found three types of interaction: Two types of bonds with different partial ionic character and physisorption. The physical origin for this rests on the charge state of the Ti clusters: when Ti clusters are neutral, H2 is dissociated, and H forms bonds with the Ti cluster. On the other hand, H2 is adsorbed in molecular form on positively charged Ti clusters, resulting in physisorption. Thus, this work clarifies the bonding mechanisms of hydrogen on graphene-supported Ti clusters.

physics.chem-ph↗

arXiv2016

Rapid and catalyst-free CVD growth of graphene on hBN

Recently, hexagonal boron nitride (h-BN) has been shown to act as an ideal substrate to graphene by greatly improving the material transport properties thanks to its atomically flat surface, low interlayer electronic coupling and almost perfect reticular matching. Chemical vapour deposition (CVD) is presently considered the most scalable approach to grow graphene directly on h-BN. However, for the catalyst-free approach, poor control over the shape and crystallinity of the graphene grains and low growth rates are typically reported. In this work we investigate the crystallinity of differently shaped grains and identify a path towards a real van der Waals epitaxy of graphene on h-BN by adopting a catalyst-free CVD process. We demonstrate the polycrystalline nature of circular-shaped pads and attribute the stemming of different oriented grains to airborne contamination of the h-BN flakes. We show that single-crystal grains with six-fold symmetry can be obtained by adopting high hydrogen partial pressures during growth. Notably, growth rates as high as 100 nm/min are obtained by optimizing growth temperature and pressure. The possibility of synthesizing single-crystal graphene on h-BN with appreciable growth rates by adopting a simple CVD approach is a step towards an increased accessibility of this promising van der Waals heterostructure.

cond-mat.mtrl-sci↗

arXiv2016

Anisotropic straining of graphene using micropatterned SiN membranes

We use micro-Raman spectroscopy to study strain profiles in graphene monolayers suspended over SiN membranes micropatterned with holes of non-circular geometry. We show that a uniform differential pressure load $ΔP$ over elliptical regions of free-standing graphene yields measurable deviations from hydrostatic strain conventionally observed in radially-symmetric microbubbles. The top hydrostatic strain $\bar{\varepsilon}$ we observe is estimated to be $\approx0.7\%$ for $ΔP = 1\,{\rm bar}$ in graphene clamped to elliptical SiN holes with axis $40$ and $20\,{\rm μm}$. In the same configuration, we report a $G_\pm$ splitting of $10\,{\rm cm^{-1}}$ which is in good agreement with the calculated anisotropy $Δ\varepsilon \approx 0.6\%$ for our device geometry. Our results are consistent with the most recent reports on the Grüneisen parameters. Perspectives for the achievement of arbitrary strain configurations by designing suitable SiN holes and boundary clamping conditions are discussed.

cond-mat.mtrl-sci↗

arXiv2016

Low-temperature quantum transport in CVD-grown single crystal graphene

Chemical vapor deposition (CVD) has been proposed for large-scale graphene synthesis for practical applications. However, the inferior electronic properties of CVD graphene are one of the key problems to be solved. In this study, we present a detailed study on the electronic properties of high-quality single crystal monolayer graphene. The graphene is grown by CVD on copper using a cold-wall reactor and then transferred to Si/SiO2. Our low-temperature magneto-transport data demonstrate that the characteristics of the measured single-crystal CVD graphene samples are superior to those of polycrystalline graphene and have a quality which is comparable to that of exfoliated graphene on Si/SiO2. The Dirac point in our best samples is located at back-gate voltages of less than 10V, and their mobility can reach 11000 cm2/Vs. More than 12 flat and discernible half-integer quantum Hall plateaus have been observed in high magnetic field on both the electron and hole side of the Dirac point. At low magnetic field, the magnetoresistance shows a clear weak localization peak. Using the theory of McCann et al., we find that the inelastic scattering length is larger than 1 μm in these samples even at the charge neutrality point.

cond-mat.mes-hall↗

arXiv2015

Rapid CVD growth of millimetre-sized single crystal graphene using a cold-wall reactor

In this work we present a simple pathway to obtain large single-crystal graphene on copper (Cu) foils with high growth rates using a commercially available cold-wall chemical vapour deposition (CVD) reactor. We show that graphene nucleation density is drastically reduced and crystal growth is accelerated when: i) using ex-situ oxidised foils; ii) performing annealing in an inert atmosphere prior to growth; iii) enclosing the foils to lower the precursor impingement flux during growth. Growth rates as high as 14.7 and 17.5 micrometers per minute are obtained on flat and folded foils, respectively. Thus, single-crystal grains with lateral size of about one millimetre can be obtained in just one hour. The samples are characterised by optical microscopy, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy as well as selected area electron diffraction (SAED) and low-energy electron diffraction (LEED), which confirm the high quality and homogeneity of the films. The development of a process for the quick production of large grain graphene in a commonly used commercial CVD reactor is a significant step towards an increased accessibility to millimetre-sized graphene crystals.

cond-mat.mtrl-sci↗