arXiv subjects

Valeri Lebedev

Publications and source records attributed to Valeri Lebedev.

At least 19 recordsLinked to original sources

arXiv2026

Continuous coherent spin-frequency metrology in storage rings via resonant beam-driven detection

Precision measurements in storage rings are increasingly limited by the ability to monitor collective spin dynamics coherently over long time scales. Existing polarimetry techniques rely on destructive scattering processes that preclude continuous, non-intercepting tracking of spin evolution and constrain both statistical sensitivity and systematic control. Here we introduce a non-destructive, phase-coherent polarimetry method in which the stored beam polarization is treated as a continuous dynamical observable rather than a quantity inferred from scattering events. Spin-dependent electromagnetic fields generated by a polarized relativistic beam establish a symmetry-selected differential signal on pickup electrodes. This signal is transduced into a narrowband phase modulation of a high-Q resonator interrogated with a coherent probe, while dominant charge-induced backgrounds are rejected through geometric symmetry, helicity reversal, and synchronous demodulation. Controlled spin precession (spin-wheel operation) provides a stable phase reference enabling phase-coherent detection of slow spin evolution. Combined with optimized lattice symmetry and beam cooling, this approach can substantially extend the usable spin coherence time, with values approaching 10^5 s appearing realistic within existing accelerator technology. The resulting readout supports optimal slope-based estimation with T^{-3/2} statistical scaling while eliminating the efficiency penalties inherent to scattering-based polarimetry. For storage-ring EDM experiments, this combination enables sensitivity approaching the level expected within the Standard Model. More broadly, the method establishes a general phase-coherent architecture for collective spin measurements in storage rings, adapting resonant sensing concepts from axion dark-matter searches to charged-particle precision experiments.

hep-ex↗

arXiv2025

Status of the Proton EDM Experiment (pEDM)

The Proton EDM Experiment (pEDM) is the first direct search for the proton electric dipole moment (EDM) with the aim of being the first experiment to probe the Standard Model (SM) prediction of any particle EDM. Phase-I of pEDM will achieve $10^{-29} e\cdot$cm, improving current indirect limits by four orders of magnitude. This will establish a new standard of precision in nucleon EDM searches and offer a unique sensitivity to better understand the Strong CP problem. The experiment is ideally positioned to explore physics beyond the Standard Model (BSM), with sensitivity to axionic dark matter via the signal of an oscillating proton EDM and across a wide mass range of BSM models from $\mathcal{O}(1\text{GeV})$ to $\mathcal{O}(10^3\text{TeV})$. Utilizing the frozen-spin technique in a highly symmetric storage ring that leverages existing infrastructure at Brookhaven National Laboratory (BNL), pEDM builds upon the technological foundation and experimental expertise of the highly successful Muon $g$$-$$2$ Experiments. With significant R\&D and prototyping already underway, pEDM is preparing a conceptual design report (CDR) to offer a cost-effective, high-impact path to discovering new sources of CP violation and advancing our understanding of fundamental physics. It will play a vital role in complementing the physics goals of the next-generation collider while simultaneously contributing to sustaining particle physics research and training early-career researchers during gaps between major collider operations.

hep-ex↗

arXiv2024

High energy cooling

The paper considers methods of particle cooling mostly concentrating on cooling of high energy heavy particles in the high energy colliders. Presently, there are two major methods of the cooling the electron cooling and stochastic cooling. The latter can be additionally separated on the microwave stochastic cooling, the optical stochastic cooling (OSC) and the coherent electron cooling (CEC). OSC and CEC are essentially extensions of microwave stochastic cooling operating in 1-10 GHz frequency range to the optical frequencies corresponding to 30-300 THz frequency range. The OSC uses undulators as a pickup and a kicker, and an optical amplifier for signal amplification, while the CEC uses an electron beam for all these functions.

physics.acc-ph↗

arXiv2023

Numerical Modeling of a Proof-of-Principle Experiment on Optical Stochastic Cooling at the IOTA Electron Storage Ring

Cooling of beams circulating in storage rings is critical for many applications including particle colliders and synchrotron light sources. A method enabling unprecedented beam-cooling rates, optical stochastic cooling (OSC), was recently demonstrated in the IOTA electron storage ring at Fermilab. This paper describes the numerical implementation of the OSC process in the particle-tracking program ELEGANT and discusses the validation of the developed model with available experimental data. The model is also employed to highlight some features associated with different modes of operation of OSC. The developed simulation tool should be valuable in guiding future configurations of optical stochastic cooling and, more broadly, modeling self-field-based beam manipulations.

physics.acc-ph↗

arXiv2022

The storage ring proton EDM experiment

We describe a proposal to search for an intrinsic electric dipole moment (EDM) of the proton with a sensitivity of \targetsens, based on the vertical rotation of the polarization of a stored proton beam. The New Physics reach is of order $10^~3$TeV mass scale. Observation of the proton EDM provides the best probe of CP-violation in the Higgs sector, at a level of sensitivity that may be inaccessible to electron-EDM experiments. The improvement in the sensitivity to $\theta_{QCD}$, a parameter crucial in axion and axion dark matter physics, is about three orders of magnitude.

hep-ph↗

arXiv2022

Electric dipole moments and the search for new physics

Static electric dipole moments of nondegenerate systems probe mass scales for physics beyond the Standard Model well beyond those reached directly at high energy colliders. Discrimination between different physics models, however, requires complementary searches in atomic-molecular-and-optical, nuclear and particle physics. In this report, we discuss the current status and prospects in the near future for a compelling suite of such experiments, along with developments needed in the encompassing theoretical framework.

hep-ph↗

arXiv2021

A Cost-Effective Upgrade Path for the Fermilab Accelerator Complex

The Fermilab Proton Improvement Plan II, or PIP-II, would enable the world's most intense high-energy neutrino beam and would help scientists search for rare particle physics processes. The PIP-II goal is to deliver 1.2 MW of proton beam power from the Fermilab Main Injector, over the energy range 60 - 120 GeV, at the start of operation of the LBNF/DUNE program. PIP-II provides a variety of upgrade paths to higher beam power from the Main Injector, as demanded by the neutrino science program and as recommended by the 2014 P5 report. Delivering more than 2 MW to the LBNF target in the future will require a replacement of the existing Booster. This report outlines a cost-effective Booster replacement option and an upgrade path for the Fermilab Accelerator Complex to attain 2.4-MW beam power on the LBNF target, as well as to retain the capability to provide 8-GeV proton beams to the existing Fermilab Muon Campus via the existing Recycler ring. Its cost-effectiveness is achieved by: (1) using a small-diameter metallic vacuum chamber in the Booster replacement and (2) reusing the existing Recycler ring. Reusing the Recycler ring may be of particular advantage since it is presently employed to deliver 8-GeV beams to the Muon Campus experiments. The present concept also retains such a capability.

physics.acc-ph↗

arXiv2021

Comment on "Fast-slow mode coupling instability for coasting beams in the presence of detuning impedance"

In this comment we show untenability of key points of the recent article of N. Biancacci, E. Metral and M. Migliorati [Phys. Rev. Accel. Beams 23, 124402 (2020)], hereafter the Article and the Authors. Specifically, the main Eqs. (23), suggested to describe mode coupling, are shown to be unacceptable even as an approximation. The Article claims the solution of this pair of equations to be in "excellent agreement" with the pyHEADTAIL simulations for CERN PS, which is purportedly demonstrated by Fig. 6. Were it really so, it would be a signal of a mistake in the code. However, the key part of the simulation results is not actually shown, and the demonstrated agreement has all the features of an illusion.

physics.acc-ph↗

arXiv2021

Cooling and diffusion rates in coherent electron cooling concepts

We present analytic cooling and diffusion rates for a simplified model of coherent electron cooling (CEC), based on a proton energy kick at each turn. This model also allows to estimate analytically the rms value of electron beam density fluctuations in the "kicker" section. Having such analytic expressions should allow for better understanding of the CEC mechanism, and for a quicker analysis and optimization of main system parameters. Our analysis is applicable to any CEC amplification mechanism, as long as the wake (kick) function is available.

physics.acc-ph↗

arXiv2020

Studies of Beam Intensity Effects in Fermilab Booster Synchrotron

Detrimental beam dynamics effects limit performance of high intensity rapid cycling synchrotrons (RCS) such as the 8 GeV proton Fermilab Booster. Here we report the results of comprehensive experimental studies of various beam intensity dependent effects in the Booster. In the first part, we report the dependencies of the Booster beam intensity losses on the total number of protons per pulse and on key operational parameters such as the machine tunes and chromaticities. Then we cross-check two methods of the beam emittance measurements (the multi-wires proportional chambers and the ionization profile monitors). Finally we used the intensity dependent emittance growth effects to analyze the ultimate performance of the machine in present configuration, with the maximum space-charge tuneshift parameter Qsc of 0.6, and after its injection energy is upgraded from 0.4 GeV to 0.8 GeV.

physics.acc-ph↗

arXiv2020

Measurements of undulator radiation power noise and comparison with $\textit{ab initio}$ calculations

Generally, turn-to-turn fluctuations of synchrotron radiation power in a storage ring depend on the 6D phase-space distribution of the electron bunch. This effect is related to the interference of fields radiated by different electrons. Changes in the relative electron positions and velocities inside the bunch result in fluctuations in the total emitted energy per pass in a synchrotron radiation source. This effect has been previously described assuming constant and equal electron velocities before entering the synchrotron radiation source. In this paper, we present a generalized formula for the fluctuations with a non-negligible beam divergence. Further, we corroborate this formula in a dedicated experiment with undulator radiation in the Integrable Optics Test Accelerator (IOTA) storage ring at Fermilab. Lastly, possible applications in beam instrumentation are discussed.

physics.acc-ph↗

arXiv2020

Transverse beam emittance measurement by undulator radiation power noise

Generally, turn-to-turn power fluctuations of incoherent spontaneous synchrotron radiation in a storage ring depend on the 6D phase-space distribution of the electron bunch. In some cases, if only one parameter of the distribution is unknown, this parameter can be determined from the measured magnitude of these power fluctuations. In this Letter, we report an absolute measurement (no free parameters or calibration) of a small vertical emittance (5--15 nm rms) of a flat beam by this method, under conditions, when it is unresolvable by a conventional synchrotron light beam size monitor.

physics.acc-ph↗

arXiv2020

Stochastic Cooling with Strong Band Overlap

Up to present time the stochastic cooling was only tested and used at the microwave frequencies. Majority of these stochastic cooling systems operate without Schottky band overlap which greatly simplifies tuning of cooling systems and removes unwanted coupling between different cooling systems. A transition from the microwave stochastic cooling to the optical stochastic cooling or to the coherent electron cooling increases the central frequency of cooling systems by orders of magnitude and makes impossible a cooling system operation without overlap of Schottky bands. In this paper we consider how the band overlap affects the maximum cooling rate and the optimal gain.

physics.acc-ph↗

arXiv2020

Comprehensive Symmetric-Hybrid ring design for pEDM experiment at below $10^{-29}e\cdot$cm

A concise demonstrative summary of the Symmetric Hybrid ring design for the storage ring proton electric dipole moment experiment is presented. Critical issues such as lattice design, background electrical fields,geometrical phase, general relativity, spin coherence time and polarimeter systematics are presented. Overall, we find that with the currently proposed design iteration, systematic error sources are reduced by orders of magnitude and that the ring alignment requirements are within the currently available technology.

physics.acc-ph↗

arXiv2019

Statistical properties of undulator radiation in the IOTA storage ring

We study turn-by-turn fluctuations in the number of spontaneously emitted photons from an undulator, installed in the Integrable Optics Test Accelerator (IOTA) electron storage ring at Fermilab. A theoretical model is presented, showing the relative contributions due to the discrete nature of light emission and to the incoherent sum of fields from different electrons in the bunch. The model is compared with a previous experiment at Brookhaven and with new experiments we carried out at IOTA. Our experiments focused on the case of a large number of longitudinal and transverse radiation modes, a regime where photon shot noise is significant and the total magnitude of the fluctuations is very small. The experimental and data analysis techniques, required to reach the desired sensitivity, are detailed. We discuss how the model and the experiment provide insights into this emission regime, enable diagnostics of small beam sizes, and improve our understanding of beam lifetime in IOTA.

physics.acc-ph↗

arXiv2019

Rapid-Cycling Synchrotron for Multi-Megawatt Proton Facility at Fermilab

The Fermilab accelerator complex delivers intense high-energy proton beams to a variety of fixed-target scientific programs, including a flagship long-baseline neutrino program. With the advent of the Deep Underground Neutrino Experiment (DUNE) and Long Baseline Neutrino Facility (LBNF) program there is strong motivation for a 2.4 MW beam power upgrade of the Fermilab proton facility. We show the Fermilab proton facility can achieve 2.4~MW with a new rapid-cycling synchrotron (RCS) to replace the Fermilab Booster and we provide a comprehensive technical analysis of the RCS-based facility design. Past design efforts and operational experience at the Fermilab Booster, J-PARC RCS, and Oak Ridge SNS are leveraged to provide strong empirical precedent for the design. We provide a parametric study of slip-stacking accumulation, RCS extraction energy, space-charge limits, beampipe aperture, eddy current heating, injection foil heating, and lattice optics. The 2.4 MW benchmark for the long baseline neutrino program is achieved independently of a previously proposed multi-GeV linac program, but we assess the impact the linac upgrade would have on RCS performance.

physics.acc-ph↗

arXiv2018

A Cost-Effective Rapid-Cycling Synchrotron

The present Fermilab proton Booster is an early example of a rapidly-cycling synchrotron (RCS). Built in the 1960s, it features a design in which the combined-function dipole magnets serve as vacuum chambers. Such a design is quite cost-effective, and it does not have the limitations associated with the eddy currents in a metallic vacuum chamber. However, an important drawback of that design is a high impedance, as seen by a beam, because of the magnet laminations. More recent RCS designs (e.g. J-PARC) employ large and complex ceramic vacuum chambers in order to mitigate the eddy current effects and to shield the beam from the magnet laminations. Such a design, albeit very successful, is quite costly because it requires large-bore magnets and large-bore RF cavities. In this article, we will consider an RCS concept with a thin-wall metallic vacuum chamber as a compromise between the chamber-less Fermilab Booster design and the large-bore design with ceramic chambers.

physics.acc-ph↗

arXiv2018

Multiple intrabeam scattering in X-Y coupled focusing systems

This paper describes an analytical method to calculate the emittance growth rates due to intra-beam scattering in a circular accelerator with arbitrary x-y coupling. The underlying theory is based on the Landau collision integral and the extended Mais-Ripken parametrization of a coupled betatron motion. The presented results are based on calculations of average emittance growth rates for an initially Gaussian distribution. They are applicable to both bunched and continuous beams.

physics.acc-ph↗