arXiv subjects

Viktor G. Hadjiev

Publications and source records attributed to Viktor G. Hadjiev.

13 recordsLinked to original sources

arXiv2025

Thermal Conductivity above 2000 W/m.K in Boron Arsenide by Nanosecond Transducer-less Time-Domain Thermoreflectance

Cubic boron arsenide (c-BAs) has been theoretically predicted to exhibit thermal conductivity \k{appa} comparable to that of diamond, yet experimental measurements have plateaued at ~1300W/mK. We report room-temperature \k{appa} exceeding 2000W/mK in c-BAs, on par with single-crystal diamond. This finding is enabled by high-quality single crystals and a newly developed nanosecond, transducer-less time-domain thermoreflectance technique that allows spatial mapping of \k{appa} without metal transducers. Thermal conductivity correlates with crystal quality, as evidenced by stronger photoluminescence and longer photoluminescence lifetimes. However, the observed nanosecond lifetimes remain shorter than expected for an indirect bandgap semiconductor, suggesting room for further crystal quality improvement and higher \k{appa}. These results challenge current theoretical models and highlight c-BAs as a promising material for next-generation electronics.

physics.app-ph↗

arXiv2022

Theory and Experiments of Pressure-Tunable Broadband Light Emission from Self-Trapped Excitons in Metal Halide Crystals

Hydrostatic pressure has been commonly applied to tune broadband light emissions from self-trapped excitons (STE) in perovskites for producing white light and study of basic electron-phonon interactions. However, a general theory is still lacking to understand pressure-driven evolution of STE emissions. In this work we first identify a theoretical model that predicts the effect of hydrostatic pressure on STE emission spectrum, we then report the observation of extremely broadband photoluminescence emission and its wide pressure spectral tuning in 2D indirect bandgap CsPb2Br5 crystals. An excellent agreement is found between the theory and experiment on the peculiar experimental observation of STE emission with a nearly constant spectral bandwidth but linearly increasing energy with pressure below 2 GPa. Further analysis by the theory and experiment under higher pressure reveals that two types of STE are involved and respond differently to external pressure. We subsequently survey published STE emissions and discovered that most of them show a spectral blue-shift under pressure, as predicted by the theory. The identification of an appropriate theoretical model and its application to STE emission through the coordinate configuration diagram paves the way for engineering the STE emission and basic understanding of electron-phonon interaction.

cond-mat.mtrl-sci↗

arXiv2020

Self-formed 2D/3D Heterostructure on the Edge of 2D Ruddlesden-Popper Hybrid Perovskites Responsible for Intriguing Optoelectronic Properties and Higher Cell Efficiency

The observation of low energy edge photoluminescence and its beneficial effect on the solar cell efficiency of Ruddlesden-Popper perovskites has unleashed an intensive research effort to reveal its origin. This effort, however, has been met with more challenges as the underlying material structure has still not been identified; new modellings and observations also do not seem to converge. Using 2D (BA)2(MA)2Pb3Br10 as an example, we show that 3D MAPbBr3 is formed due to the loss of BA on the edge. This self-formed MAPbBr3 can explain the reported edge emission under various conditions, while the reported intriguing optoelectronic properties such as fast exciton trapping from the interior 2D perovskite, rapid exciton dissociation and long carrier lifetime can be understood via the self-formed 2D/3D lateral perovskite heterostructure. The 3D perovskite is identified by submicron infrared spectroscopy, the emergence of XRD signature from freezer-milled nanometer-sized 2D perovskite and its photoluminescence response to external hydrostatic pressure. The revelation of this edge emission mystery and the identification of a self-formed 2D/3D heterostructure provide a new approach to engineering 2D perovskites for high-performance optoelectronic devices.

physics.app-ph↗

arXiv2019

Photoluminescence mapping and time-domain thermo-photoluminescence for rapid imaging and measurement of thermal conductivity of boron arsenide

Cubic boron arsenide (BAs) is attracting greater attention due to the recent experimental demonstration of ultrahigh thermal conductivity \k{appa} above 1000 W/mK. However, its bandgap has not been settled and a simple yet effective method to probe its crystal quality is missing. Furthermore, traditional \k{appa} measurement methods are destructive and time consuming, thus they cannot meet the urgent demand for fast screening of high \k{appa} materials. After we experimentally established 1.82 eV as the indirect bandgap of BAs and observed room-temperature band-edge photoluminescence, we developed two new optical techniques that can provide rapid and non-destructive characterization of \k{appa} with little sample preparation: photoluminescence mapping (PL-mapping) and time-domain thermo-photoluminescence (TDTP). PL-mapping provides nearly real-time image of crystal quality and \k{appa} over mm-sized crystal surfaces; while TDTP allows us to pick up any spot on the sample surface and measure its \k{appa} using nanosecond laser pulses. These new techniques reveal that the apparent single crystals are not only non-uniform in \k{appa}, but also are made of domains of very distinct \k{appa}. Because PL-mapping and TDTP are based on the band-edge PL and its dependence on temperature, they can be applied to other semiconductors, thus paving the way for rapid identification and development of high-\k{appa} semiconducting materials.

cond-mat.mtrl-sci↗

arXiv2019

Boron isotope effect on the thermal conductivity of boron arsenide single crystals

Boron arsenide (BAs) with a zinc blende structure has recently been discovered to exhibit unusual and ultrahigh thermal conductivity (k), providing a new outlook for research on BAs and other high thermal conductivity materials. Technology for BAs crystal growth has been continuously improving, however, the influence of boron isotopes, pure or mixed, on the thermal conductivity in BAs is still not completely clear. Here we report detailed studies on the growth of single crystals of BAs with different isotopic ratios and demonstrate that the k of isotopically pure BAs is at least 10% higher than that of BAs grown from natural B. Raman spectroscopy characterization shows differences in scattering among various BAs samples. The presented results will be helpful in guiding further studies on the influence of isotopes on optimizing k in BAs.

cond-mat.mtrl-sci↗

arXiv2019

Revealing the Origin of Luminescence Center in 0D Cs4PbBr6 Perovskite

Zero dimensional perovskite Cs4PbBr6 has attracted considerable attention recently not only because of its highly efficient green photoluminescence (PL), but also its two highly debated opposing mechanisms of the luminescence: embedded CsPbBr3 nanocrystals versus intrinsic Br vacancy states. After a brief discussion on the root cause of the controversy, we provide sensitive but non-invasive methods that can not only directly correlate luminescence with the underlying structure, but also distinguish point defects from embedded nanostructures. We first synthesized both emissive and non-emissive Cs4PbBr6 crystals, obtained the complete Raman spectrum of Cs4PbBr6 and assigned all Raman bands based on density functional theory simulations. We then used correlated Raman-PL as a passive structure-property method to identify the difference between emissive and non-emissive Cs4PbBr6 crystals and revealed the existence of CsPbBr3 nanocrystals in emissive Cs4PbBr6. We finally employed a diamond anvil cell to probe the response of luminescence centers to hydrostatic pressure. The observations of fast red-shifting, diminishing and eventual disappearance of both green emission and Raman below Cs4PbBr6 phase transition pressure of ~3 GPa is compatible with CsPbBr3 nanocrystal inclusions as green PL emitters and cannot be explained by Br vacancies. The resolution of this long-lasting controversy paves the way for further device applications of low dimensional perovskites, and our comprehensive optical technique integrating structure-property with dynamic pressure response is generic and can be applied to other emerging optical materials to understand the nature of their luminescent centers.

cond-mat.mtrl-sci↗

arXiv2018

Bright Luminescent Surface States on the Edges of Wide-bandgap Two-dimensional Lead Halide Perovskite

Three-dimensional lead halide perovskites have surprised people for their defect-tolerant electronic and optical properties, two-dimensional lead halide layered structures exhibit even more puzzling phenomena: luminescent edge states in Ruddlesden-Popper perovskites and conflicting reports of highly luminescent versus non-emissive CsPb$_{\text{2}}$Br$_{\text{5}}$. In this work, we report the observation of bright luminescent surface states on the edges of CsPb$_{\text{2}}$Br$_{\text{5}}$ microplatelets. We prove that green surface emission makes wide-bandgap single crystal CsPb$_{\text{2}}$Br$_{\text{5}}$ highly luminescent. Using polarized Raman spectroscopy and atomic-resolution transmission electron microscopy, we further prove that polycrystalline CsPb$_{\text{2}}$Br$_{\text{5}}$ is responsible for the bright luminescence. We propose that these bright edge states originate from corner-sharing clusters of PbBr$_{\text{6}}$ in the distorted regions between CsPb$_{\text{2}}$Br$_{\text{5}}$ nanocrystals. Because metal halide octahedrons are building blocks of perovskites, our discoveries settle a long-standing controversy over the basic property of CsPb$_{\text{2}}$Br$_{\text{5}}$ and open new opportunities to understand, design and engineer perovskite solar cells and other optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2015

Ultra-ductile and low friction epoxy matrix composites

We present the results of an effective reinforcement of epoxy resin matrix with fullerene carbon soot. The optimal carbon soot addition of 1 wt. % results in a toughness improvement of almost 20 times. The optimized soot-epoxy composites also show an increase in tensile elongation of more than 13 %, thus indicating a change of the failure mechanism in tension from brittle to ductile. Additionally, the coefficient of friction is reduced from its 0.91 value in plain epoxy resin to 0.15 in the optimized composite. In the optimized composite, the lateral forces during nanoscratching decrease as much as 80 % with enhancement of the elastic modulus and hardness by 43 % and 94%, respectively. The optimized epoxy resin fullerene soot composite can be a strong candidate for coating applications where toughness, low friction, ductility and light weight are important.

cond-mat.mtrl-sci↗

arXiv2013

Anomalously Strong 2D Band Intensity in Twisted Bilayer Graphene: Raman Evidence for Doubly Degenerate Dirac Band

We report the observation of anomalously strong 2D band in twisted bilayer graphene (tBLG) with large rotation angles under 638-nm and 532-nm visible laser excitation. The 2D band of tBLG can reach four times as opposed to two times as strong as that of single layer graphene. The same tBLG samples also exhibit rotation dependent G-line resonances and folded phonons under 364-nm UV laser excitation. We attribute this 2D band Raman enhancement to the constructive quantum interference between two double-resonance Raman pathways which are enabled by nearly degenerate Dirac band in tBLG Moiré superlattices.

cond-mat.mes-hall↗

arXiv2013

Twisted Bilayer Graphene Superlattices

Twisted bilayer graphene (tBLG) provides us with a large rotational freedom to explore new physics and novel device applications, but many of its basic properties remain unresolved. Here we report the synthesis and systematic Raman study of tBLG. Chemical vapor deposition was used to synthesize hexagon- shaped tBLG with a rotation angle that can be conveniently determined by relative edge misalignment. Superlattice structures are revealed by the observation of two distinctive Raman features: folded optical phonons and enhanced intensity of the 2D-band. Both signatures are strongly correlated with G-line resonance, rotation angle and laser excitation energy. The frequency of folded phonons decreases with the increase of the rotation angle due to increasing size of the reduced Brillouin zone (rBZ) and the zone folding of transverse optic (TO) phonons to the rBZ of superlattices. The anomalous enhancement of 2D-band intensity is ascribed to the constructive quantum interference between two Raman paths enabled by a near-degenerate Dirac cone. The fabrication and Raman identification of superlattices pave the way for further basic study and new applications of tBLG.

cond-mat.mtrl-sci↗

arXiv2012

AB-Stacked Multilayer Graphene Synthesized via Chemical Vapor Deposition: A Characterization by Hot Carrier Transport

We report the synthesis of AB-stacked multilayer graphene via ambient pressure chemical vapor deposition on Cu foils, and demonstrate a method to construct suspended multilayer graphene devices. In four-terminal geometry, such devices were characterized by hot carrier transport at temperatures down to 240 mK and in magnetic fields up to 14 T. The differential conductance (dI/dV) shows a characteristic dip at longitudinal voltage bias V=0 at low temperatures, indicating the presence of hot electron effect due to a weak electron-phonon coupling. Under magnetic fields, the magnitude of the dI/dV dip diminishes through the enhanced intra-Landau level cyclotron phonon scattering. Our results provide new perspectives in obtaining and understanding AB-stacked multilayer graphene, important for future graphene-based applications.

cond-mat.mes-hall↗

arXiv2011

Probing phonon emission via hot carrier transport in suspended graphitic multilayers

We study hot carrier transport under magnetic fields up to 15 T in suspended graphitic multilayers through differential conductance (dI/dV) spectroscopy. Distinct high-energy dI/dV anomalies have been observed and shown to be related to intrinsic phonon-emission processes in graphite. The evolution of such dI/dV anomalies under magnetic fields is further understood as a consequence of inter-Landau level cyclotron-phonon resonance scattering. The observed magneto-phonon effects not only shed light on the physical mechanisms responsible for high-current transport in graphitic systems, but also offer new perspectives for optimizing performance in graphitic nano-electronic devices.

cond-mat.mes-hall↗

arXiv2011

Tunable magnetoresistance behavior in suspended graphitic multilayers through ion implantation

We report a tunable magnetoresistance (MR) behavior in suspended graphitic multilayers through point defect engineering by ion implantation. We find that ion implantation drastically changes the MR behavior: the linear positive MR in pure graphitic multilayers transforms into a negative MR after introducing significant short-range disorders (implanted boron or carbon atoms), consistent with recent non-Markovian transport theory. Our experiments suggest the important role of the non-Markovian process in the intriguing MR behavior for graphitic systems, and open a new window for understanding transport phenomena beyond the Drude-Boltzmann approach and tailoring the electronic properties of graphitic layers.

cond-mat.mes-hall↗