arXiv subjects

Vitaliy A. Guzenko

Publications and source records attributed to Vitaliy A. Guzenko.

11 recordsLinked to original sources

arXiv2024

Electrostatic interference control of a high-energy coherent electron beam using a three-element Boersch phase shifter

In contrast to static holographic phase shifters, which are restricted to specific electron beam energies and microscope settings, Boersch phase shifters are promising for creating programmable arrays for generating two- and three-dimensional electron beam patterns. We recently demonstrated a three-element Boersch phase shifter device [Thakkar et al., J. Appl. Phys. 128 (2020), 134502], which was fabricated by electron beam lithography and is compatible with up-scaling. However, it suffers from parasitic beam deflection and resulting cross-talk. Here, we report a five-layer phase shifter device, which is based on a metal-insulator-metal-insulator-metal structure (as originally envisioned by Boersch) that reduces cross-talk. We demonstrate a three-element Boersch phase shifter that shows minimal beam deflection of voltage-controlled three-electron-beam interference patterns in a transmission electron microscope operated at 200 keV. The feasibility of using such multi-element phase shifter arrays is discussed.

physics.app-ph↗

arXiv2021

Electron beam transverse phase space tomography using nanofabricated wire scanners with submicrometer resolution

Characterization and control of the transverse phase space of high-brightness electron beams is required at free-electron lasers or electron diffraction experiments for emittance measurement and beam optimization as well as at advanced acceleration experiments. Dielectric laser accelerators or plasma accelerators with external injection indeed require beam sizes at the micron level and below. We present a method using nano-fabricated metallic wires oriented at different angles to obtain projections of the transverse phase space by scanning the wires through the beam and detecting the amount of scattered particles. Performing this measurement at several locations along the waist allows assessing the transverse distribution at different phase advances. By applying a novel tomographic algorithm the transverse phase space density can be reconstructed. Measurements at the ACHIP chamber at SwissFEL confirm that the transverse phase space of micrometer-sized electron beams can be reliably characterized using this method.

physics.acc-ph↗

arXiv2020

Time-Resolved XUV absorption spectroscopy and magnetic circular dichroism at the Ni $M_{2,3}$-edges

Ultrashort optical pulses can trigger a variety of non-equilibrium processes in magnetic thin films affecting electrons and spins on femtosecond timescales. In order to probe the charge and magnetic degrees of freedom simultaneously, we developed an x-ray streaking technique that has the advantage of providing a jitter-free picture of absorption cross section changes. In this paper, we present an experiment based on this approach which we performed using five photon probing energies at the Ni $M_{2,3}$-edges. This allowed us to retrieve the absorption and magnetic circular dichroism time traces, yielding detailed information on transient modifications of electron and spin populations close to the Fermi level. Our findings suggest that the observed charge and magnetic dynamics both depend on the XUV probing wavelength, and can be described, at least qualitatively, by assuming ultrafast energy shifts of the electronic and magnetic elemental absorption resonances, as reported in recent work. However, our analysis also hints at more complex changes, highlighting the need for further experimental and theoretical analysis in order to gain a thorough understanding of the interplay of electronic and spin degrees of freedom in optically excited magnetic thin films.

cond-mat.mtrl-sci↗

arXiv2020

Simultaneous two-color snapshot view on ultrafast charge and spin dynamics in a Fe-Cu-Ni tri-layer

Ultrafast phenomena on a femtosecond timescale are commonly examined by pump-probe experiments. This implies multiple measurements where the sample under investigation is pumped with a short light pulse and then probed with a second pulse at various time delays to follow its dynamics. Recently, the principle of streaking extreme ultraviolet (XUV) pulses in the temporal domain has enabled recording the dynamics of a system within a single pulse. However, separate pump-probe experiments at different absorption edges still lack a unified timing, when comparing the dynamics in complex systems. Here we report on an experiment using a dedicated optical element and the two-color emission of the FERMI XUV free-electron laser to follow the charge and spin dynamics in composite materials at two distinct absorption edges, simultaneously. The sample, consisting of ferromagnetic Fe and Ni layers, separated by a Cu layer, is pumped by an infrared laser and probed by a two-color XUV pulse with photon energies tuned to the M edges of these two transition metals. The experimental geometry intrinsically avoids any timing uncertainty between the two elements and unambiguously reveals an approximately 100 fs delay of the magnetic response with respect to the electronic excitation for both Fe and Ni. This delay shows that the electronic and spin degrees of freedom are decoupled during the demagnetization process. These observations underline the importance of simultaneous investigation of the temporal response of both charge and spin in multi-component materials. In a more general scenario, the experimental approach can be extended to continuous energy ranges, promising the development of jitter-free transient absorption spectroscopy in the XUV and soft X-ray regimes.

cond-mat.mtrl-sci↗

arXiv2019

Improved Photoelectrochemical Water Splitting of CaNbO2N Photoanodes by Co-Pi Photodeposition and Surface Passivation

Photoelectrochemical solar water splitting is a promising approach to convert solar energy into sustainable hydrogen fuel using semiconductor electrodes. Due to their visible light absorption properties, oxynitrides have shown to be attractive photocatalysts for this application. In this study, the influence of the preparation method of CaNbO2N particles on their morphological and optical properties, and thereby their photoelectrochemical performance, is investigated. The best performing CaNbO2N photoanode is produced by ammonolysis of Nb enriched calcium niobium oxide. The enhanced photoactivity arises from an enlarged surface area and superior visible light absorption properties. The photoactivity of this photoanode was further enhanced by photodeposition of Co-Pi co-catalyst and by atomic layer deposition of an Al2O3 overlayer. A photocurrent density of 70 microA.cm-2 at 1.23 V vs RHE was achieved. The observed enhancement of the photoelectrochemical performance after Co-Pi/Al2O3 deposition is the combined effect of the improved kinetics of oxygen evolution due to the Co-Pi co-catalyst and the reduced surface recombination of the photogenerated carriers at the Al2O3 surface layer.

physics.app-ph↗

arXiv2018

Exploiting atomic layer deposition for fabricating sub-10 nm X-ray lenses

Moving towards significantly smaller nanostructures, direct structuring techniques such as electron beam lithography approach fundamental limitations in feature size and aspect ratios. Application of nanostructures like diffractive X-ray lenses requires feature sizes of below 10 nm to enter a new regime in high resolution X-raymicroscopy. As such dimensions are difficult to obtain using conventional electron beam lithography, we pursue a line-doubling approach. We demonstrate that thismethod yields structure sizes as small as 6.4 nm. X-ray lenses fabricated in this way are tested for their efficiency and microscopic resolution. In addition, the line-doubling technique is successfully extended to a six-fold scheme, where each line in a template structure written by electron beam lithography evolves into six metal lines.

physics.app-ph↗

arXiv2018

Generation and Measurement of Sub-Micrometer Relativistic Electron Beams

The generation of low-emittance electron beams has received significant interest in recent years. Driven by the requirements of X-ray free electron lasers, the emittance of photocathode injectors has been reduced significantly, with a corresponding increase in beam brightness. At the same time, this has put increasingly stringent requirements on the instrumentation to measure the beam size. These requirements are even more stringent for novel accelerator developments, such as laser-driven accelerators based on dielectric structures or on a plasma, or for linear colliders at the energy frontier. We present here the generation and measurement of a sub-micrometer electron beam, at a particle energy of 330 MeV, and a bunch charge below 1 pC. An electron beam optics with a beta-function of a few millimeters in the vertical plane had been set up. The beam was characterized through a wire scanner that employs a 1 um wide metallic structure fabricated using the electron beam lithography on a silicon nitride membrane. The smallest (rms) beam size presented here is less than 500 nm.

physics.acc-ph↗

arXiv2017

Tunable kinoform x-ray beam splitter

We demonstrate an x-ray beam splitter with high performances for multi-kilo-electron-volt photons. The device is based on diffraction on kinoform structures, which overcome the limitations of binary diffraction gratings. This beam splitter achieves a dynamical splitting ratio in the range 0-99.1% by tilting the optics and is tunable, here shown in a photon energy range of 7.2-19 keV. High diffraction efficiency of 62.6% together with an extinction ratio of 0.6% is demonstrated at 12.4 keV, with angular separation for the split beam of 0.5 mrad. This device can find applications in beam monitoring at synchrotrons, at x-ray free electron lasers for online diagnostics and beamline multiplexing and, possibly, as key elements for delay lines or ultrashort x-ray pulses manipulation.

physics.app-ph↗

arXiv2017

Systematic efficiency study of line-doubled zone plates

Line-doubled Fresnel zone plates provide nanoscale, high aspect ratio structures required for efficient high resolution imaging in the multi-keV x-ray range. For the fabrication of such optics a high aspect ratio HSQ resist template is produced by electron-beam lithography and then covered with Ir by atomic layer deposition (ALD).

cond-mat.mtrl-sci↗

arXiv2017

Fabrication of diamond diffraction gratings for experiments with intense hard x-rays

The demands on optical components to tolerate high radiation dose and manipulate hard x-ray beams that can fit the experiment requirements, are constantly increasing due to the advancements in the available x-ray sources. Here we have successfully fabricated the transmission type gratings using diamond, with structure sizes ranging from few tens of nanometres up to micrometres, and aspect ratio of up to 20. The efficiencies of the gratings were measured over a wide range of photon energies and their radiation tolerance was confirmed using the most intense x-ray source in the world. The fidelity of these grating structures was confirmed by the quality of the measured experimental results.

cond-mat.mtrl-sci↗

arXiv2007

Weak antilocalization in high mobility Ga(x)In(1-x)As/InP two-dimensional electron gases with strong spin-orbit coupling

We have studied the spin-orbit interaction in a high mobility two-dimensional electron gas in a GaInAs/InP heterostructure as a function of an applied gate voltage as well as a function of temperature. Highly sensitive magnetotransport measurements of weak antilocalization as well as measurements of Shubnikov--de Haas oscillations were performed in a wide range of electron sheet concentrations. In our samples the electron transport takes place in the strong spin precession regime in the whole range of applied gate voltages, which is characterized by the spin precession length being shorter than the elastic mean free path. The magnitude of the Rashba spin-orbit coupling parameter was determined by fitting the experimental curves by a simulated quantum conductance correction according to a model proposed recently by Golub [Phys. Rev. B 71, 235310 (2005)]. A comparison of the Rashba coupling parameter extracted using this model with the values estimated from the analysis of the beating pattern in the Shubnikov--de Haas oscillations showed a good agreement.

cond-mat.mes-hall↗