Searcharxiv⌕ Search

arXiv subjects

W. Zhang

Publications and source records attributed to W. Zhang.

At least 37 records · Page 2Linked to original sources

Characterizing the Gamma-ray Emission Properties of the Globular Cluster M5 with the Fermi-LAT

We analyzed the globular cluster M5 (NGC 5904) using 15 years of gamma-ray data from the Fermi Large Area Telescope (LAT). Using rotation ephemerides generated from Arecibo and FAST radio telescope observations, we searched for gamma-ray pulsations from the seven millisecond pulsars (MSPs) identified in M5. We detected no significant pulsations from any of the individual pulsars. Also, we searched for possible variations of the gamma-ray emission as a function of orbital phase for all the six MSPs in binary systems, but did not detect any significant modulations. The gamma-ray emission from the direction of M5 is well described by an exponentially cutoff power-law spectral model, although other models cannot be excluded. The phase-averaged emission is consistent with being steady on a time scale of a few months. We estimate the number of MSPs in M5 to be between 1 and 10, using the gamma-ray conversion efficiencies for well-characterized gamma-ray MSPs in the Third Fermi Large Area Telescope Catalog of Gamma-ray Pulsars, suggesting that the sample of known MSPs in M5 is (nearly) complete, even if it is not currently possible to rule out a diffuse component of the observed gamma rays from the cluster.

astro-ph.HE↗

Photoemission study and band alignment of GaN passivation layers on GaInP heterointerface

III-V semiconductor-based photoelectrochemical (PEC) devices show the highest solar-to-electricity or solar-to-fuel conversion efficiencies. GaInP is a relevant top photoabsorber layer or a charge-selective contact in PEC for integrated and direct solar fuel production, due to its tunable lattice constant, electronic band structure, and favorable optical properties. To enhance the stability of its surface against chemical corrosion which leads to decomposition, we deposit a GaN protection and passivation layer. The n-doped GaInP(100) epitaxial layers were grown by metalorganic chemical vapor deposition on top of GaAs(100) substrate. Subsequently, thin 1-20 nm GaN films were grown on top of the oxidized GaInP surfaces by atomic layer deposition. We studied the band alignment of these multi-junction heterostructures by X-ray and ultraviolet photoelectron spectroscopy. Due to the limited emission depth of photoelectrons, we determined the band alignment by a series of separate measurements in which we either modified the GaInP(100) surface termination or the film thickness of the grown GaN on GaInP(100) buffer layers. On n-GaInP(100) surfaces prepared with the well-known phosphorus-rich (2x2)/c(4x2) reconstruction we found up-ward surface band bending (BB) of 0.34 eV, and Fermi level pinning due to the present surface states. Upon oxidation, the surface states are partially passivated resulting in a reduction of BB to 0.12 eV and a valence band offset (VBO) between GaInP and oxide bands of 2.0 eV. Between the GaInP(100) buffer layer and the GaN passivation layer, we identified a VBO of 1.8 eV. The corresponding conduction band offset of -0.2 eV is found to be rather small. Therefore, we evaluate the application of the GaN passivation layer as a promising technological step not only to reduce surface states but also to increase the stability of the surfaces of photoelectrochemical devices.

physics.app-ph↗

Fabrication of nanopatterned metal layers on silicon by nanoindentation / nanoscratching and electrodeposition

The present work illustrates a novel approach for the maskless and resistless fabrication of nanopatterned metal layers on Si substrates, based on the combination of nanomechanical surface modification techniques (such as nanoindentation and nanoscratching) and electrodeposition. Single crystal (100) n-doped Si substrates were first cleaned from native oxide. Nanoindentation and nanoscratching were then used to locally change the substrate microstructure and create regions with reduced electrical conductivity. The substrates were finally mounted as cathode electrodes in a three electrode electrochemical cell to potentiostatically deposit a Ni layer. Electrodeposition was prevented in regions with modified microstructure, enabling the formation of a patterned Ni layer. The fabrication of several patterns including continuous Ni lines of 200 nm width and several microns length was obtained.

physics.app-ph↗

Uncovering the geometry of the hot X-ray corona in the Seyfert galaxy NGC4151 with IXPE

We present an X-ray spectro-polarimetric analysis of the bright Seyfert galaxy NGC4151. The source has been observed with the Imaging X-ray Polarimetry Explorer (IXPE) for 700 ks, complemented with simultaneous XMM-Newton (50 ks) and NuSTAR (100 ks) pointings. A polarization degree $Π = 4.9 {\pm} 1.1 \%$ and angle $Ψ= 86° {\pm} 7°$ east of north ($68\%$ confidence level) are measured in the 2-8 keV energy range. The spectro-polarimetric analysis shows that the polarization could be entirely due to reflection. Given the low reflection flux in the IXPE band, this requires however a reflection with a very large ($> 38 \%$) polarization degree. Assuming more reasonable values, a polarization degree of the hot corona ranging from ${\sim}4$ to ${\sim}8\%$ is found. The observed polarization degree excludes a spherical lamppost geometry for the corona, suggesting instead a slab-like geometry, possibly a wedge, as determined via Monte Carlo simulations. This is further confirmed by the X-ray polarization angle, which coincides with the direction of the extended radio emission in this source, supposed to match the disc axis. NGC4151 is the first AGN with an X-ray polarization measure for the corona, illustrating the capabilities of X-ray polarimetry and IXPE in unveiling its geometry.

astro-ph.GA↗

X-ray polarimetry and spectroscopy of the neutron star low-mass X-ray binary GX 9+9: an in-depth study with IXPE and NuSTAR

We report on a comprehensive analysis of simultaneous X-ray polarimetric and spectral data of the bright atoll source GX 9+9 with the Imaging X-ray Polarimetry Explorer (IXPE) and NuSTAR. The source is significantly polarized in the 4--8 keV band, with a degree of $2.2\% \pm 0.5\%$ (uncertainty at the 68% confidence level). The NuSTAR broad-band spectrum clearly shows an iron line, and is well described by a model including thermal disk emission, a Comptonized component, and reflection. From a spectro-polarimetric fit, we obtain an upper limit to the polarization degree of the disk of 4% (at 99% confidence level), while the contribution of Comptonized and reflected radiation cannot be conclusively separated. However, the polarization is consistent with resulting from a combination of Comptonization in a boundary or spreading layer, plus reflection off the disc, which gives a significant contribution in any realistic scenario.

astro-ph.HE↗

The geometry of the hot corona in MCG-05-23-16 constrained by X-ray polarimetry

We report on the second observation of the radio-quiet active galactic nucleus (AGN) MCG-05-23-16 performed with the Imaging X-ray Polarimetry Explorer (IXPE). The observation started on 2022 November 6 for a net observing time of 640 ks, and was partly simultaneous with NuSTAR (86 ks). After combining these data with those obtained in the first IXPE pointing on May 2022 (simultaneous with XMM-Newton and NuSTAR) we find a 2-8 keV polarization degree $Π$ = 1.6 $\pm$ 0.7 (at 68 per cent confidence level), which corresponds to an upper limit $Π$ = 3.2 per cent (at 99 per cent confidence level). We then compare the polarization results with Monte Carlo simulations obtained with the MONK code, with which different coronal geometries have been explored (spherical lamppost, conical, slab and wedge). Furthermore, the allowed range of inclination angles is found for each geometry. If the best fit inclination value from a spectroscopic analysis is considered, a cone-shaped corona along the disc axis is disfavoured.

astro-ph.HE↗

Machine Learning for UAV Propeller Fault Detection based on a Hybrid Data Generation Model

This paper describes the development of an on-board data-driven system that can monitor and localize the fault in a quadrotor unmanned aerial vehicle (UAV) and at the same time, evaluate the degree of damage of the fault under real scenarios. To achieve offline training data generation, a hybrid approach is proposed for the development of a virtual data-generative model using a combination of data-driven models as well as well-established dynamic models that describe the kinematics of the UAV. To effectively represent the drop in performance of a faulty propeller, a variation of the deep neural network, a LSTM network is proposed. With the RPM of the propeller as input and based on the fault condition of the propeller, the proposed propeller model estimates the resultant torque and thrust. Then, flight datasets of the UAV under various fault scenarios are generated via simulation using the developed data-generative model. Lastly, a fault classifier using a CNN model is proposed to identify as well as evaluate the degree of damage to the damaged propeller. The scope of this paper focuses on the identification of faulty propellers and classification of the fault level for quadrotor UAVs using RPM as well as flight data. Doing so allows for early minor fault detection to prevent serious faults from occurring if the fault is left unrepaired. To further validate the workability of this approach outside of simulation, a real-flight test is conducted indoors. The real flight data is collected and a simulation to real sim-real test is conducted. Due to the imperfections in the build of our experimental UAV, a slight calibration approach to our simulation model is further proposed and the experimental results obtained show that our trained model can identify the location of propeller fault as well as the degree/type of damage. Currently, the diagnosis accuracy on the testing set is over 80%.

cs.LG↗

The design and test results of A Giga-Bit Cable Receiver (GBCR) for the ATLAS Inner Tracker Pixel Detector

This paper presents the design and test results of a Gigabit Cable Receiver ASIC called GBCR for the HL-LHC upgrade of the ATLAS Inner Tracker (ITk) pixel detector. Three prototypes (GBCR1, GBCR2, and GBCR3) have been designed in the CERN-identified 65 nm CMOS technology. GBCR receives seven (GBCR2) or six (GBCR3) channels (RX) each at 1.28 Gbps from the front-end readout chip RD53B via flex cables up to 1 meter and Twinax cables up to 5 meters and sends the equalized and retimed signals to lpGBT. Both GBCR2 and GBCR3 ASICs have two transmitting channels (TX) that pre-emphasize the signals from lpGBT before sending them to RD53B through the same cables. No Single-Event Upset (SEU) is observed in any tested channels of GBCR2 in a 400 MeV proton beam. The extrapolated bit error rate for the future HL-LHC application is below 8*10^(-16), significantly below the specified BER criterion. GBCR3 is designed to improve the immunity to single-event-upset by applying the Triple Modular Redundancy (TMR) technology to all RX channels. The retimed signals from GBCR3 have less total jitter than those from GBCR2 (35 ps versus 79 ps). Each receiver channel of GBCR3 consumes 75% more power than that of GBCR2.

physics.ins-det↗

Deep search for gamma-ray emission from the accreting X-ray pulsar 1A 0535+262

Binary systems are a well-established subclass of gamma-ray sources. The high mass X-ray binary pulsar 1A~0535+262 has been considered to be a possible gamma-ray emitter for a long time, although former gamma-ray searches using \textit{Fermi}-LAT and VERITAS data resulted in upper limits only. We aim at a deep search for gamma-ray emission and pulsations from 1A~0535+262 using more than 13 years of \textit{Fermi}-LAT data. The analysis was performed for both the whole \textit{Fermi}-LAT data set, as well as for the X-ray outbursts that 1A~0535+262 has experienced since the launch of \textit{Fermi}. Various X-ray observations have been used to generate the ephemeris for the pulsation search. We also investigate the long-term gamma-ray flux variability and perform orbital phase-resolved analysis for the outbursts. We did not detect any steady or pulsed gamma-ray emission from 1A~0535+262 during the whole \textit{Fermi}-LAT mission span or its X-ray outbursts. We thus derived the deepest gamma-ray luminosity upper limits to date at the 95\% confidence level to be around (2.3$-$4.7)$\times 10^{32}\, \rm erg \, s^{-1}$ depending on different spectral indices assumed, which results in a ratio of $L_{\rm γ}$ to $L_{\rm X}$ (2$-$150 keV) being (1.9$-$3.9)$\times10^{-6}$.

astro-ph.HE↗

In plane reorientation induced single laser pulse magnetization reversal in rare-earth based multilayer

Single Pulse All Optical Helicity Independent Switching (AO-HIS) represents the ability to reverse the magnetic moment of a nanostructure using a femtosecond single laser pulse. It is an ultrafast method to manipulate magnetization without the use of any applied field. Since the first switching experiments carried on GdFeCo ferrimagnetic systems, single pulse AO-HIS has been restricted for a while to Gd-based alloys or Gd/FM bilayers where FM is a ferromagnetic layer. Only recently has AO-HIS been extended to a few other materials: MnRuGa ferrimagnetic Heusler alloys and Tb/Co multilayers with a very specific range of thickness and composition. Here, we demonstrate that single pulse AO-HIS observed in Tb/Co results from a different mechanism than the one for Gd based samples and that it can be obtained for a large range of rare earth-transition metal (RE-TM) multilayers, making this phenomenon much more general. Surprisingly, in this large family of (RE-TM) multilayer systems, the threshold fluence for switching is observed to be independent of the pulse duration, up to at least 12 ps. Moreover, at high laser intensities, concentric ring domain structures are induced, unveiling multiple fluence thresholds. These striking switching features, which are in contrast to those of AO-HIS in GdFeCo alloys, concomitant with the demonstration of an in-plane reorientation of the magnetization, point towards an intrinsic precessional reversal mechanism. Our results allow expanding the variety of materials with tunable magnetic properties that can be integrated in complex heterostructures and provide a pathway to engineer materials for future applications based on all-optical control of magnetic order.

cond-mat.mtrl-sci↗

A theoretical study of the time-lags due to Comptonization and the constraints on the X-ray corona in AGN

We study the Fourier time-lags due to the Comptonization of disc-emitted photons in a spherical, uniform, and stationary X-ray corona, which located on the rotational axis of the black hole. We use Monk, a general relativistic Monte-Carlo radiative transfer code, to calculate Compton scattering of photons emitted by a thin disc with a Novikov-Thorne temperature profile. We find that the model time-lags due to Comptonization remain constant up to a characteristic frequency and then rapidly decrease to zero at higher frequencies. We provide equations which can be used to determine the time-lags and cross spectra for a wide range of values for the corona radius, temperature, optical depth, height, and for various accretion rates and black hole masses. We also provide an equation for the X-ray luminosity of a single corona, as a function of the its characteristics and location above the disc. Remarkably, the observed X-ray time-lags of nearby, bright active galaxies can be successfully reproduced by inverse Comptonization process of multiple dynamic coronae.

astro-ph.HE↗

Emergence of large quantum oscillation frequencies in thin flakes of the kagome superconductor CsV$_{3}$Sb$_{5}$

Kagome metals AV$_3$Sb$_5$~(A = K, Rb, Cs) are recently discovered platforms featuring an unusual charge-density-wave (CDW) order and superconductivity. The electronic band structure of a kagome lattice can host both flat bands as well as Dirac-like bands, offering the possibility to stabilize various quantum states. Here, we probe the band structure of CsV$_3$Sb$_5$ via Shubnikov-de Haas quantum oscillations on both bulk single crystals and thin flakes. Although our frequency spectra are broadly consistent with the published data, we unambiguously reveal the existence of new frequencies with large frequencies ranging from $\sim$2085~T to $\sim$2717~T in thin flakes when the magnetic field is along the $c$-axis. These quasi-two-dimensional frequencies correspond to $\sim$52\% to 67\% of the CDW-distorted Brillouin zone volume. The Lifshitz-Kosevich analysis further uncovers surprisingly small cyclotron effective masses, of the order of $\sim$0.1~$m_e$, for these frequencies. Consequently, a large number of high-velocity carriers exists in the thin flake of CsV$_3$Sb$_5$. Comparing with our band structure calculations, we argue that an orbital-selective modification of the band structure is active. Our results provide indispensable information for understanding the fermiology of CsV$_3$Sb$_5$, paving a way for understanding how an orbital-selective mechanism can become an effective means to tune its electronic properties.

cond-mat.supr-con↗

Polarization constraints on the X-ray corona in Seyfert Galaxies: MCG-05-23-16

We report on the first observation of a radio-quiet Active Galactic Nucleus (AGN) using polarized X-rays: the Seyfert 1.9 galaxy MCG-05-23-16. This source was pointed with the Imaging X-ray Polarimetry Explorer (IXPE) starting on May 14, 2022 for a net observing time of 486 ks, simultaneously with XMM-Newton (58 ks) and NuSTAR (83 ks). A polarization degree smaller than $Π<4.7\%$ (at the 99% c.l.) is derived in the 2-8 keV energy range, where emission is dominated by the primary component ascribed to the hot corona. The broad-band spectrum, inferred from a simultaneous fit to the IXPE, NuSTAR, and XMM-Newton data, is well reproduced by a power law with photon index $Γ=1.85\pm0.01$ and a high-energy cutoff $E_{\rm C}=120\pm15$ keV. A comparison with Monte Carlo simulations shows that a lamp-post and a conical geometry of the corona are consistent with the observed upper limit, a slab geometry is allowed only if the inclination angle of the system is less than 50$^{\circ}$.

astro-ph.HE↗

Precision Determination of the Neutral Weak Form Factor of $^{48}$Ca

We report a precise measurement of the parity-violating asymmetry $A_{\rm PV}$ in the elastic scattering of longitudinally polarized electrons from $^{48}{\rm Ca}$. We measure $A_{\rm PV} =2668\pm 106\ {\rm (stat)}\pm 40\ {\rm (syst)}$ parts per billion, leading to an extraction of the neutral weak form factor $F_{\rm W} (q=0.8733$ fm$^{-1}) = 0.1304 \pm 0.0052 \ {\rm (stat)}\pm 0.0020\ {\rm (syst)}$ and the charge minus the weak form factor $F_{\rm ch} - F_{\rm W} = 0.0277\pm 0.0055$. The resulting neutron skin thickness $R_n-R_p=0.121 \pm 0.026\ {\rm (exp)} \pm 0.024\ {\rm (model)}$~fm is relatively thin yet consistent with many model calculations. The combined CREX and PREX results will have implications for future energy density functional calculations and on the density dependence of the symmetry energy of nuclear matter.

nucl-ex↗

Fate of charge order in overdoped La-based cuprates

In high-temperature cuprate superconductors, stripe order refers broadly to a coupled spin and charge modulation with a commensuration of eight and four lattice units, respectively. How this stripe order evolves across optimal doping remains a controversial question. Here we present a systematic resonant inelastic x-ray scattering (RIXS) study of weak charge correlations in La2-xSrxCuO4 (LSCO) and La1.8-xEu0.2SrxCuO4 (LESCO). Ultra high energy resolution experiments demonstrate the importance of the separation of inelastic and elastic scattering processes. Upon increasing doping x, the long-range temperature dependent stripe order is found to be replaced by short-range temperature independent correlations at a critical point xc = 0.15 distinct from the pseudogap critical doping. We argue that the doping and temperature independent short-range correlations originate from unresolved electron-phonon coupling that broadly peaks at the stripe ordering vector. In LSCO, long-range static stripe order vanishes in a quantum critical point around optimal doping.

cond-mat.supr-con↗

Resonant Inelastic X-ray Scattering Study of Electron-Exciton Coupling in High-Tc Cuprates

Explaining the mechanism of superconductivity in the high-$T_c$ cuprates requires an understanding of what causes electrons to form Cooper pairs. Pairing can be mediated by phonons, the screened Coulomb force, spin or charge fluctuations, excitons, or by a combination of these. An excitonic pairing mechanism has been postulated, but experimental evidence for coupling between conduction electrons and excitons in the cuprates is sporadic. Here we use resonant inelastic x-ray scattering (RIXS) to monitor the temperature dependence of the $\underline{d}d$ exciton spectrum of Bi$_2$Sr$_2$CaCu$_2$O$_{8-x}$ (Bi-2212) crystals with different charge carrier concentrations. We observe a significant change of the $\underline{d}d$ exciton spectra when the materials pass from the normal state into the superconductor state. Our observations show that the $\underline{d}d$ excitons start to shift up (down) in the overdoped (underdoped) sample when the material enters the superconducting phase. We attribute the superconductivity-induced effect and its sign-reversal from underdoped to overdoped to the exchange coupling of the site of the $\underline{d}d$ exciton to the surrounding copper spins.

cond-mat.supr-con↗

The peculiar spectral evolution of the new X-ray transient MAXI J0637-430

We studied the transient Galactic black hole candidate MAXI J0637-430 with data from Insight-HXMT, Swift and XMM-Newton. The broad-band X-ray observations from Insight-HXMT help us constrain the power-law component. MAXI J0637-430 is located at unusually high Galactic latitude; if it belongs to the Galactic thick disk, we suggest a most likely distance <7 kpc. Compared with other black hole transients, MAXI J0637-430 is also unusual for other reasons: a fast transition to the thermal dominant state at the start of the outburst; a low peak temperature and luminosity (we estimate them at ~ 0.7 keV and <0.1 times Eddington, respectively); a short decline timescale; a low soft-to-hard transition luminosity (<0.01 times Eddington). We argue that such properties are consistent with a small binary separation, short binary period (P ~ 2 hr), and low-mass donor star (M2 ~ 0.2 M_sun). Moreover, spectral modelling shows that a single disk-blackbody component is not a good fit to the thermal emission. Soft spectral residuals, and deviations from the standard L_disk ~ T^4 in relation, suggest the need for a second thermal component. We propose and discuss various scenarios for such component, in addition to those presented in previous studies of this source. For example, a gap in the accretion disk between a hotter inner ring near the innermost stable orbit, and a cooler outer disk. Another possibility is that the second thermal component is the thermal plasma emission from an ionized outflow.

astro-ph.HE↗

A physical model for the broadband energy spectrum of X-ray illuminated accretion discs: fitting the spectral energy distribution of NGC 5548

We develop a new physical model for the broadband spectral energy distribution (SED) of X-ray illuminated accretion discs, that takes into account the mutual interaction of the accretion disc and the X-ray corona, including all relativistic effects. We assume a Keplerian, optically thick and geometrically thin accretion disc and an X-ray source in the lamp-post geometry that emits an isotropic power-law spectrum with a high-energy cut-off. We assume that all the energy that would be released by thermal radiation in the standard disc model in its innermost part, is transported to the corona, effectively cooling the disc in this region. We include the disc heating due to thermalisation of the absorbed part of the disc illumination by X-ray corona. The X-ray reflection from the disc is also included. We compute the X-ray luminosity and the low-energy X-ray cut-off through an iterative process, taking full account of the interplay between the X-ray illumination of the disc and the resulting accretion disc spectrum which enters the corona so that the energy balance is preserved. The corona radius is also computed from the conservation of the photon's number during Comptonization. We discuss the model SEDs and their dependence on system parameters. The disc-corona interaction has profound effects - it constrains the X-ray luminosity and changes the shape and normalisation of the UV/optical blue bump. We use the new code to fit the broad-band SED of a typical Seyfert 1 galaxy, NGC 5548. We infer a high black-hole spin, an intermediate system inclination, and an accretion rate below 10% of Eddington. The X-ray luminosity in this source could be supported by 45-70% of the accretion energy dissipated in the disc. The new model, named KYNSED, is publicly available to be used for fitting AGN SEDs inside the XSPEC spectral analysis tool.

astro-ph.HE↗