arXiv subjects

W. Zhang

Publications and source records attributed to W. Zhang.

At least 55 records · Page 3Linked to original sources

arXiv2022

Uniaxial Pressure Induced Stripe Order Rotation in La$_{1.88}$Sr$_{0.12}$CuO$_4$

Static stripe order is detrimental to superconductivity. Yet, it has been proposed that transverse stripe fluctuations may enhance the inter-stripe Josephson coupling and thus promote superconductivity. Direct experimental studies of stripe dynamics, however, remain difficult. From a strong-coupling perspective, transverse stripe fluctuations are realized in the form of dynamic "kinks" -- sideways shifting stripe sections. Here, we show how modest uniaxial pressure tuning reorganizes directional kink alignment. Our starting point is La$_{1.88}$Sr$_{0.12}$CuO$_4$, where transverse kink ordering results in a rotation of stripe order away from the crystal axis. Application of mild uniaxial pressure changes the ordering pattern and pins the stripe order to the crystal axis. This reordering occurs at a much weaker pressure than that to detwin the stripe domains and suggests a rather weak transverse stripe stiffness. Weak spatial stiffness and transverse quantum fluctuations are likely key prerequisites for stripes to coexist with superconductivity.

cond-mat.supr-con↗

arXiv2022

A 40 Gbps Optical Transceiver for Particle Physics Experiments

We present the design and the test results of a quad-channel optical transceiver module (QTRx) possibly for future particle physics experiments. The transmitters of QTRx, each at 10 Gbps, are based on a Quad-channel VCSEL Diode array Driver (QLDD) and 1 x 4 VCSEL array. The receivers of QTRx, with data rates of 2.56 Gbps or 10 Gbps per channel, are based on a Quad-channel Trans-Impedance and limiting Amplifier (QTIA) and 1 x 4 photodiode array of GaAs or InGaAs. QTRx is 20 mm x 10 mm x 5 mm and couples to an MT fiber connector. Test results indicate that QTRx achieves the design goals with a power consumption of 124 mW per transmitter channel at 10 Gbps and 120 mW at 2.56 Gbps for the receiver channel with an on-chip charge pump. The sensitivities of QTIA are -17 dBm at 2.56 Gbps and -8 dBm at 10 Gbps, respectively. Further improvements with a gold-finger interface and a more compact optical lens are being designed.

physics.ins-det↗

arXiv2022

A prototype optical link board with redundancy design for the ATLAS liquid argon calorimeter Phase-2 upgrade

A prototype optical-link board has been developed for the ATLAS Liquid Argon Calorimeter Phase-2 upgrade. The board consists of 24 lpGBT chips and 8 VTRx+ modules and demonstrates the full optical link design of the future front-end board. The board has 22 simplex optical links to transmit detector data, which are emulated in FPGAs and injected through 6 FMC connectors, to the off-detector electronics. The board implements 2 duplex optical links for clocks, control, and monitoring with redundant design to improve the system reliability. Data transmission and all redundant designs have been verified. A fiber routing scheme, in which 2 or 3 VTRx+ modules are re-connected to the front panel with an MPO connector, has been prototyped.

physics.ins-det↗

arXiv2022

A radiation tolerant clock generator for the CMS Endcap Timing Layer readout chip

We present the test results of a low jitter Phase Locked Loop (PLL) prototype chip for the CMS Endcap Timing Layer readout chip (ETROC). This chip is based on the improved version of a clock synthesis circuit named ljCDR from the Low-Power Gigabit Transceiver (lpGBT) project. The ljCDR is tested in its PLL mode. An automatic frequency calibration (AFC) block with the Triple Modular Redundancy (TMR) register is developed for the LC-oscillator calibration. The chip was manufactured in a 65 nm CMOS process with 10 metal layers. The chip has been extensively tested, including Total Ionizing Dose (TID) testing up to 300 Mrad and Single Event Upset (SEU) testing with heavy ions possessing a Linear energy transfer (LET) from 1.3 to 62.5 MeV*cm^2/mg.

physics.ins-det↗

arXiv2022

QTIA, a 2.5 or 10 Gbps 4-Channel Array Optical Receiver ASIC in a 65 nm CMOS Technology

The Quad transimpedance and limiting amplifier (QTIA) is a 4-channel array optical receiver ASIC, developed using a 65 nm CMOS process. It is configurable between the bit rate of 2.56 Gbps and 10 Gbps per channel. QTIA offers careful matching to both GaAs and InGaAs photodiodes. At this R&D stage, each channel has a different biasing scheme to the photodiode for optimal coupling. A charge pump is implemented in one channel to provide a higher reverse bias voltage, which is especially important to mitigate radiation effects on the photodiodes. The circuit functions of QTIA successfully passed the lab tests with GaAs photodiodes.

physics.ins-det↗

arXiv2022

A 20 Gbps PAM4 Data Transmitter ASIC for Particle Physics Experiments

We present the design and test results of a novel data transmitter ASIC operating up to 20.48 Gbps with 4-level Pulse-Amplitude-Modulation (PAM4) for particle physics experiments. This ASIC, named GBS20, is fabricated in a 65 nm CMOS technology. Two serializers share a 5.12 GHz Phase Locked Loop (PLL) clock. The outputs from the serializers are combined into a PAM4 signal that directly drives a Vertical-Cavity-Surface-Emitting-Laser (VCSEL). The input data channels, each at 1.28 Gbps, are scrambled with an internal 27-1 Pseudo-Random Binary Sequence (PRBS), which also serves as a frame aligner. GBS20 is tested to work at 10.24 and 20.48 Gbps with a VCSEL-based Transmitter-Optical-Subassembly (TOSA). The power consumption of GBS20 is below 238 mW and reduced to 164 mW in the low-power mode.

physics.ins-det↗

arXiv2022

Peculiar disk behaviors of the black hole candidate MAXI J1348-630 in the hard state observed by Insight-HXMT and Swift

We present a spectral study of the black hole candidate MAXI J1348-630 during its 2019 outburst, based on monitoring observations with Insight-HXMT and Swift. Throughout the outburst, the spectra are well fitted with power-law plus disk-blackbody components. In the soft-intermediate and soft states, we observed the canonical relation L ~ T_in^4 between disk luminosity L and peak colour temperature T_in, with a constant inner radius R_in (traditionally identified with the innermost stable circular orbit). At other stages of the outburst cycle, the behaviour is more unusual, inconsistent with the canonical outburst evolution of black hole transients. In particular, during the hard rise, the apparent inner radius is smaller than in the soft state (and increasing), and the peak colour temperature is higher (and decreasing). This anomalous behaviour is found even when we model the spectra with self-consistent Comptonization models, which take into account the up-scattering of photons from the disk component into the power-law component. To explain both those anomalous trends at the same time, we suggest that the hardening factor for the inner disk emission was larger than the canonical value of ~1.7 at the beginning of the outburst. A more physical trend of radii and temperature evolution requires a hardening factor evolving from ~3.5 at the beginning of the hard state to ~1.7 in the hard intermediate state. This could be evidence that the inner disk was in the process of condensing from the hot, optically thin medium and had not yet reached a sufficiently high optical depth for its emission spectrum to be described by the standard optically-thick disk solution.

astro-ph.HE↗

arXiv2022

Chemical design rules for non-fullerene acceptors in organic solar cells

Efficiencies of organic solar cells have practically doubled since the development of non-fullerene acceptors (NFAs). However, generic chemical design rules for donor-NFA combinations are still needed. Such rules are proposed by analyzing inhomogeneous electrostatic fields at the donor-acceptor interface. It is shown that an acceptor-donor-acceptor molecular architecture, and molecular alignment parallel to the interface, results in energy level bending that destabilizes the charge transfer state, thus promoting its dissociation into free charges. By analyzing a series of PCE10:NFA solar cells, with NFAs including Y6, IEICO, and ITIC, as well as their halogenated derivatives, it is suggested that the molecular quadrupole moment of ca 75 Debye A balances the losses in the open circuit voltage and gains in charge generation efficiency.

cond-mat.mtrl-sci↗

arXiv2022

DEMO ion cyclotron heating: status of ITER-type antenna design

The ITER ICRF system will gain in complexity relative to the existing systems on modern devices, and the same will hold true for DEMO. The accumulated experience can help greatly in designing an ICRF system for DEMO. In this paper the current status of the pre-conceptual design of the DEMO ICRF antenna and some related components is presented. While many aspects strongly resemble the ITER system, in some design solutions we had to take an alternative route to be able to adapt to DEMO specific. One of the key points is the toroidal antenna extent needed for the requested ICRF heating performance, achieved by splitting the antenna in halves, with appropriate installation. Modelling of the so far largest ICRF antenna in RAPLICASOL and associated challenges are presented. Calculation are benchmarked with TOPICA. Results of the analysis of the latest model and an outlook for future steps are given.

physics.plasm-ph↗

arXiv2022

Crossover of the high-energy spin fluctuations from collective triplons to localized magnetic excitations in doped Sr14-xCaxCu24O41 cuprate ladders

We studied the magnetic excitations in the quasi-one-dimensional (q-1D) ladder subsystem of Sr_(14-x) Ca_x Cu_24 O_41(SCCO) using Cu L_3-edge resonant inelastic X-ray scattering (RIXS). By comparing momentum-resolved RIXS spectra with (x=12.2) and without (x=0) high Ca content, we track the evolution of the magnetic excitations from collective two-triplon (2T) excitations (x=0) to weakly-dispersive gapped modes at an energy of 280 meV (x=12.2). Density matrix renormalization group (DMRG) calculations of the RIXS response in the doped ladders suggest that the flat magnetic dispersion and damped excitation profile observed at x=12.2 originates from enhanced hole localization. This interpretation is supported by polarization-dependent RIXS measurements, where we disentangle the spin-conserving ΔS=0 scattering from the predominant ΔS=1 spin-flip signal in the RIXS spectra. The results show that the low-energy weight in the ΔS=0 channel is depleted when Sr is replaced by Ca, consistent with a reduced carrier mobility. Our results demonstrate that off-ladder impurities can affect both the low-energy magnetic excitations and superconducting correlations in the CuO_4 plaquettes. Finally, our study characterizes the magnetic and charge fluctuations in the phase from which superconductivity emerges in SCCO at elevated pressures.

cond-mat.supr-con↗

arXiv2021

GBLinks: GNN-Based Beam Selection and Link Activation for Ultra-dense D2D mmWave Networks

In this paper, we consider the problem of joint beam selection and link activation across a set of communication pairs to effectively control the interference between communication pairs via inactivating part communication pairs in ultra-dense device-to-device (D2D) mmWave communication networks. The resulting optimization problem is formulated as an integer programming problem that is nonconvex and NP-hard. Consequently, the global optimal solution, even the local optimal solution, cannot be generally obtained. To overcome this challenge, this paper resorts to design a deep learning architecture based on graph neural network to finish the joint beam selection and link activation, with taking the network topology information into account. Meanwhile, we present an unsupervised Lagrangian dual learning framework to train the parameters of the GBLinks model. Numerical results show that the proposed GBLinks model can converges to a stable point with the number of iterations increases, in terms of the weighted sum rate. Furthermore, the GBLinks model can reach near-optimal solution through comparing with the exhaustive search scheme in small-scale ultra-dense D2D mmWave communication networks and outperforms GreedyNoSched and the SCA-based method. It also shows that the GBLinks model can generalize to varying densities and coverage regions of ultra-dense D2D mmWave communication networks.

cs.IT↗

arXiv2021

Rivet, RivetHZTool and HERA -- A validation effort for coding HERA measurements for Rivet

During the DESY summer student program 2021, young scientists from more than 13 different countries worked together, connecting from remote, to provide computer codes within the Rivet framework for 19 HERA measurements. Most of these measurements were originally available within the HZTool package, but no longer accessible for modern analysis packages such as Rivet. The temporary RivetHZTool interface was used to validate most of the new Rivet plugins.

hep-ph↗

arXiv2021

Prospects for differentiating extended coronal geometries in AGNs with the IXPE mission

X-ray polarimetry can potentially constrain the unknown geometrical shape of AGN coronae. We present simulations of the X-ray polarization signal expected from AGN coronae, assuming three different geometries, namely slab, spherical and conical. We use the fully relativistic Monte-Carlo Comptonization code monk to compute the X-ray polarization degree and angle. We explore different coronal parameters such as shape, size, location and optical depth. Different coronal geometries give a significantly different X-ray polarization signal. A slab corona yields a high polarization degree, up to 14% depending on the viewing inclination; a spherical corona yields low values, about 1-3%, while a conical corona yields intermediate values. We also find a difference of 90 degrees in polarization angle between the slab corona and the spherical or conical coronae. Upcoming X-ray polarimetry missions like IXPE will allow us to observationally distinguish among different coronal geometries in AGNs for the first time.

astro-ph.HE↗

arXiv2021

Search for the metal-weak thick disk from the LAMOST DR5

Based on the data release of the Large Sky Area Multi-Object Fiber Spectroscopic Telescope survey (LAMOST DR5) and the \emph{Gaia} Early Data Release 3 (\emph{Gaia} EDR3), we construct a sample containing 46,109 giant (log~$\emph{g}$ $\leqslant$ 3.5\,dex) stars with heliocentric distance d $\leqslant$ 4 kpc, and the sample is further divided into two groups of the inner ({\RGC} $<$ 8.34 \,kpc) and outer region ({\RGC} $>$ 8.34\,kpc). The {\LZ} distributions of our program stars in the panels with different [Fe/H] and [$α$/Fe] suggest that the thick-disk consists of two distinct components with different chemical compositions and kinematic properties. For the inner region, the metal-weak thick disk (MWTD) contributes significantly when [$α$/Fe] $>+$0.2\,dex and [Fe/H] $<-$0.8\,dex, while the canonical thick-disk (TD) dominates when [Fe/H]$>-$0.8\,dex. However, MWTD clearly appears only when [$α$/Fe] $>+$0.2\,dex and [Fe/H] $<-$1.2\,dex for the outer region, and its proportion is lower than that of the inner region within the same metallicity. Similar result can be obtained from the {\VP} distribution. The high fraction of MWTD in the inner than that in the outer region imply that MWTD may form in the inner disk, and is an observational evidence about the inside-out disk formation scenario.

astro-ph.GA↗

arXiv2021

Robust Integrative Biclustering for Multi-view Data

In many biomedical research, multiple views of data (e.g., genomics, proteomics) are available, and a particular interest might be the detection of sample subgroups characterized by specific groups of variables. Biclustering methods are well-suited for this problem as they assume that specific groups of variables might be relevant only to specific groups of samples. Many biclustering methods exist for identifying row-column clusters in a view but few methods exist for data from multiple views. The few existing algorithms are heavily dependent on regularization parameters for getting row-column clusters, and they impose unnecessary burden on users thus limiting their use in practice. We extend an existing biclustering method based on sparse singular value decomposition for single-view data to data from multiple views. Our method, integrative sparse singular value decomposition (iSSVD), incorporates stability selection to control Type I error rates, estimates the probability of samples and variables to belong to a bicluster, finds stable biclusters, and results in interpretable row-column associations. Simulations and real data analyses show that iSSVD outperforms several other single- and multi-view biclustering methods and is able to detect meaningful biclusters. iSSVD is a user-friendly, computationally efficient algorithm that will be useful in many disease subtyping applications.

stat.ME↗

arXiv2021

Search for Gamma-Ray Bursts and Gravitational Wave Electromagnetic Counterparts with High Energy X-ray Telescope of \textit{Insight}-HXMT

The High Energy X-ray telescope (HE) on-board the Hard X-ray Modulation Telescope (\textit{Insight}-HXMT) can serve as a wide Field of View (FOV) gamma-ray monitor with high time resolution ($μ$s) and large effective area (up to thousands cm$^2$). We developed a pipeline to search for Gamma-Ray Bursts (GRBs), using the traditional signal-to-noise ratio (SNR) method for blind search and the coherent search method for targeted search. By taking into account the location and spectrum of the burst and the detector response, the targeted coherent search is more powerful to unveil weak and sub-threshold bursts, especially those in temporal coincidence with Gravitational Wave (GW) events. Based on the original method in literature, we further improved the coherent search to filter out false triggers caused by spikes in light curves, which are commonly seen in gamma-ray instruments (e.g. \textit{Fermi}/GBM, \textit{POLAR}). We show that our improved targeted coherent search method could eliminate almost all false triggers caused by spikes. Based on the first two years of \textit{Insight}-HXMT/HE data, our targeted search recovered 40 GRBs, which were detected by either \textit{Swift}/BAT or \textit{Fermi}/GBM but too weak to be found in our blind search. With this coherent search pipeline, the GRB detection sensitivity of \textit{Insight}-HXMT/HE is increased to about 1.5E-08 erg/cm$^2$ (200 keV$-$3 MeV). We also used this targeted coherent method to search \textit{Insight}-HXMT/HE data for electromagnetic (EM) counterparts of LIGO-Virgo GW events (including O2 and O3a runs). However, we did not find any significant burst associated with GW events.

astro-ph.HE↗

arXiv2021

Evidence for enhanced neutron-proton correlations from the level structure of the $N=Z+1$ nucleus $^{87}_{43}$Tc$^{\ }_{44}$

The low-lying excited states in the neutron-deficient $N=Z+1$ nucleus $^{87}_{43}$Tc$^{\ }_{44}$ have been studied via the fusion-evaporation reaction $^{54}$Fe($^{36}$Ar, $2n1p$)$^{87}$Tc at the Grand Accélérateur National d'Ions Lourds (GANIL), France. The AGATA spectrometer was used in conjunction with the auxiliary NEDA, Neutron Wall, and DIAMANT detector arrays to measure coincident prompt $γ$-rays, neutrons, and charged particles emitted in the reaction. A level scheme of $^{87}$Tc from the (9/2$^{+}_{g.s.}$) state to the (33/2$^{+}_{1}$) state was established based on 6 mutually coincident $γ$-ray transitions. The constructed level structure exhibits a rotational behavior with a sharp backbending at $\hbarω\approx 0.50$ MeV. A decrease in alignment frequency and increase in alignment sharpness in the odd-mass isotonic chains around $N=44$ is proposed as an effect of the enhanced isoscalar neutron-proton interactions in odd-mass nuclei when approaching the $N=Z$ line.

nucl-ex↗

arXiv2021

In-pixel automatic threshold calibration for the CMS Endcap Timing Layer readout chip

We present the implementation and verification of an in-pixel automatic threshold calibration circuit for the CMS Endcap Timing Layer (ETL) in the High-Luminosity LHC upgrade. The discriminator threshold of the ETL readout chip (ETROC) needs to be calibrated regularly to mitigate the circuit baseline change. Traditional methods need a lot of communication through a slow control system hence are time-consuming. This paper describes an in-pixel automatic scheme with improvements in operating time and usability. In this scheme, a sample-accumulation circuit is used to measure the average discriminator output. A binary successive approximation and linear combination scan are applied to find the equivalent baseline. The actual calibration procedure has been first implemented in FPGA firmware and tested with the ETROC front-end prototype chip (ETROC0). The calibration circuit has been implemented with Triple Modular Redundancy (TMR) and verified with Single Event Effects (SEEs) simulation. A complete calibration process lasts 35 ms with a 40 MHz clock. In the worst case, the dynamic and static power consumption are estimated to be 300 uW and 10.4 uW, respectively. The circuit design, implemented in a 65 CMOS technology, will be integrated into ETROC2, the next iteration of the ETROC with a 16x16 pixel matrix.

physics.ins-det↗