Searcharxiv⌕ Search

arXiv subjects

Weidong Mei

Publications and source records attributed to Weidong Mei.

At least 73 records · Page 4Linked to original sources

Codebook Design and Performance Analysis for Wideband Beamforming in Terahertz Communications

The codebook-based analog beamforming is appealing for future terahertz (THz) communications since it can generate high-gain directional beams with low-cost phase shifters via low-complexity beam training. However, conventional beamforming codebook design based on array response vectors for narrowband communications may suffer from severe performance loss in wideband systems due to the ``beam squint" effect over frequency. To tackle this issue, we propose in this paper a new codebook design method for analog beamforming in wideband THz systems. In particular, to characterize the analog beamforming performance in wideband systems, we propose a new metric termed wideband beam gain, which is given by the minimum beamforming gain over the entire frequency band given a target angle. Based on this metric, a wideband analog beamforming codebook design problem is formulated for optimally balancing the beamforming gains in both the spatial and frequency domains, and the performance loss of conventional narrowband beamforming in wideband systems is analyzed. To solve the new wideband beamforming codebook design problem, we divide the spatial domain into orthogonal angular zones each associated with one beam, thereby decoupling the codebook design into a zone division sub-problem and a set of beamforming optimization sub-problems each for one zone. For the zone division sub-problem, we propose a bisection method to obtain the optimal boundaries for separating adjacent zones. While for each of the per-zone-based beamforming optimization sub-problems, we further propose an efficient augmented Lagrange method (ALM) to solve it. Numerical results demonstrate the performance superiority of our proposed codebook design for wideband analog beamforming to the narrowband beamforming codebook and also validate our performance analysis.

eess.SP↗

Over-the-Air Computation via 2D Movable Antenna Array

Movable antenna (MA) has emerged as a promising technology for improving the performance of wireless communication systems, which enables local movement of the antennas to create more favorable channel conditions. In this letter, we advance its application for over-the-air computation (AirComp) network, where an access point is equipped with a two-dimensional (2D) MA array to aggregate wireless data from massive users. We aim to minimize the computation mean square error (CMSE) by jointly optimizing the antenna position vector (APV), the receive combining vector at the access point and the transmit coefficients from all users. To tackle this highly non-convex problem, we propose a two-loop iterative algorithm, where the particle swarm optimization (PSO) approach is leveraged to obtain a suboptimal APV in the outer loop while the receive combining vector and transmit coefficients are alternately optimized in the inner loop. Numerical results demonstrate that the proposed MA-enhanced AirComp network outperforms the conventional network with fixed-position antennas (FPAs).

eess.SP↗

Movable Antennas Meet Intelligent Reflecting Surface: When Do We Need Movable Antennas?

Intelligent reflecting surface (IRS) and movable antenna (MA)/fluid antenna (FA) techniques have both received increasing attention in the realm of wireless communications due to their ability to reconfigure and improve wireless channel conditions. In this paper, we investigate the integration of MAs/FAs into an IRS-assisted wireless communication system. In particular, we consider the downlink transmission from a multi-MA base station (BS) to a single-antenna user with the aid of an IRS, aiming to maximize the user's received signal-to-noise ratio (SNR), by jointly optimizing the BS/IRS active/passive beamforming and the MAs' positions. Due to the similar capability of MAs and IRS for channel reconfiguration, we first conduct theoretical analyses of the performance gain of MAs over conventional fixed-position antennas (FPAs) under the line-of-sight (LoS) BS-IRS channel and derive the conditions under which the performance gain becomes more or less significant. Next, to solve the received SNR maximization problem, we propose an alternating optimization (AO) algorithm that decomposes it into two subproblems and solve them alternately. Numerical results are provided to validate our analytical results and evaluate the performance gains of MAs over FPAs under different setups.

cs.IT↗

Flexible Beam Coverage Optimization for Movable-Antenna Array

Fluid antennas (FAs) and movable antennas (MAs) have attracted increasing attention in wireless communications recently. As compared to the conventional fixed-position antennas (FPAs), their geometry can be dynamically reconfigured, such that more flexible beamforming can be achieved for signal coverage and/or interference nulling. In this paper, we investigate the use of MAs to achieve uniform coverage for multiple regions with arbitrary number and width in the spatial domain. In particular, we aim to jointly optimize the MAs weights and positions within a linear array to maximize the minimum beam gain over the desired spatial regions. However, the resulting problem is non-convex and difficult to be optimally solved. To tackle this difficulty, we propose an alternating optimization (AO) algorithm to obtain a high-quality suboptimal solution, where the MAs weights and positions are alternately optimized by applying successive convex approximation (SCA) technique. Numerical results show that our proposed MAbased beam coverage scheme can achieve much better performance than conventional FPAs.

eess.SP↗

Minimizing Movement Delay for Movable Antennas via Trajectory Optimization

Movable antennas (MAs) have received increasing attention in wireless communications due to their capability of antenna position adjustment to reconfigure wireless channels. However, moving MAs results in non-negligible delay, which may decrease the effective data transmission time. To reduce the movement delay, we study in this paper a new MA trajectory optimization problem. In particular, given the desired destination positions of multiple MAs, we aim to jointly optimize their associations with the initial MA positions and the trajectories for moving them from their respective initial to destination positions within a given two-dimensional (2D) region, such that the delay of antenna movement is minimized, subject to the inter-MA minimum distance constraints in the movement. However, this problem is a continuous-time mixed-integer linear programming (MILP) problem that is challenging to solve. To tackle this challenge, we propose a two-stage optimization framework that sequentially optimizes the MAs' position associations and trajectories, respectively. First, we relax the inter-MA distance constraints and optimally solve the resulted delay minimization problem. Next, we check if the obtained MA association and trajectory solutions satisfy the inter-MA distance constraints. If not satisfied, we then employ a successive convex approximation (SCA) algorithm to adjust the MAs' trajectories until they satisfy the given constraints. Simulation results are provided to show the effectiveness of our proposed trajectory optimization method in reducing the movement delay as well as draw useful insights.

eess.SY↗

Joint Beamforming and Antenna Position Optimization for Movable Antenna-Assisted Spectrum Sharing

Fluid antennas (FAs) and movable antennas (MAs) have drawn increasing attention in wireless communications recently due to their ability to create favorable channel conditions via local antenna movement within a confined region. In this letter, we advance their application for cognitive radio to facilitate efficient spectrum sharing between primary and secondary communication systems. In particular, we aim to jointly optimize the transmit beamforming and MA positions at a secondary transmitter (ST) to maximize the received signal power at a secondary receiver (SR) subject to the constraints on its imposed co-channel interference power with multiple primary receivers (PRs). However, such an optimization problem is difficult to be optimally solved due to the highly nonlinear functions of the received signal/interference power at the SR/all PRs in terms of the MA positions. To drive useful insights, we first perform theoretical analyses to unveil MAs' capability to achieve maximum-ratio transmission with the SR and effective interference mitigation for all PRs at the same time. To solve the MA position optimization problem, we propose an alternating optimization (AO) algorithm to obtain a high-quality suboptimal solution. Numerical results demonstrate that our proposed algorithms can significantly outperform the conventional fixed-position antennas (FPAs) and other baseline schemes.

eess.SP↗

Movable Antenna Enhanced AF Relaying: Two-Stage Antenna Position Optimization

The movable antenna (MA) technology has attracted increasing attention in wireless communications due to its capability for flexibly adjusting the positions of multiple antennas in a local region to reconfigure channel conditions. In this paper, we investigate its application in an amplify-and-forward (AF) relay system, where a multi-MA AF relay is deployed to assist in the wireless communications from a source to a destination. In particular, we aim to maximize the achievable rate at the destination, by jointly optimizing the AF weight matrix at the relay and its MAs' positions in two stages for receiving the signal from the source and transmitting its amplified version to the destination, respectively. However, compared to the existing one-stage antenna position optimization, the two-stage position optimization is more challenging due to its intricate coupling in the achievable rate at the destination. To tackle this challenge, we decompose the considered problem into several subproblems by invoking the alternating optimization (AO) and solve them by using the semidefinite programming and the gradient ascent. Numerical results demonstrate the superiority of our proposed system over the conventional relaying system with fixed-position antennas (FPAs) and also drive essential insights.

cs.IT↗

Movable Antenna-Enhanced Wireless Communications: General Architectures and Implementation Methods

Movable antennas (MAs), traditionally explored in antenna design, have recently garnered significant attention in wireless communications due to their ability to dynamically adjust the antenna positions to changes in the propagation environment. However, previous research has primarily focused on characterizing the performance limits of various MA-assisted wireless communication systems, with less emphasis on their practical implementation. To address this gap, in this article, we propose several general MA architectures that extend existing designs by varying several key aspects to cater to different application scenarios and tradeoffs between cost and performance. Additionally, we draw from fields such as antenna design and mechanical control to provide an overview of candidate implementation methods for the proposed MA architectures, utilizing either direct mechanical or equivalent electronic control. Simulation results are finally presented to support our discussion.

eess.SP↗

Movable-Antenna Position Optimization for Physical-Layer Security via Discrete Sampling

Fluid antennas (FAs) and mobile antennas (MAs) are innovative technologies in wireless communications that are able to proactively improve channel conditions by dynamically adjusting the transmit/receive antenna positions within a given spatial region. In this paper, we investigate an MA-enhanced multiple-input single-output (MISO) secure communication system, aiming to maximize the secrecy rate by jointly optimizing the positions of multiple MAs. Instead of continuously searching for the optimal MA positions as in prior works, we propose to discretize the transmit region into multiple sampling points, thereby converting the continuous antenna position optimization into a discrete sampling point selection problem. However, this point selection problem is combinatory and thus difficult to be optimally solved. To tackle this challenge, we ingeniously transform this combinatory problem into a recursive path selection problem in graph theory and propose a partial enumeration algorithm to obtain its optimal solution without the need for high-complexity exhaustive search. To further reduce the complexity, a linear-time sequential update algorithm is also proposed to obtain a high-quality suboptimal solution. Numerical results show that our proposed algorithms yield much higher secrecy rates as compared to the conventional FPA and other baseline schemes.

eess.SP↗

Integrated Sensing and Communication Under DISCO Physical-Layer Jamming Attacks

Integrated sensing and communication (ISAC) systems traditionally presuppose that sensing and communication (S&C) channels remain approximately constant during their coherence time. However, a "DISCO" reconfigurable intelligent surface (DRIS), i.e., an illegitimate RIS with random, time-varying reflection properties that acts like a "disco ball," introduces a paradigm shift that enables active channel aging more rapidly during the channel coherence time. In this letter, we investigate the impact of DISCO jamming attacks launched by a DRISbased fully-passive jammer (FPJ) on an ISAC system. Specifically, an ISAC problem formulation and a corresponding waveform optimization are presented in which the ISAC waveform design considers the trade-off between the S&C performance and is formulated as a Pareto optimization problem. Moreover, a theoretical analysis is conducted to quantify the impact of DISCO jamming attacks. Numerical results are presented to evaluate the S&C performance under DISCO jamming attacks and to validate the derived theoretical analysis.

eess.SP↗

Multi-Functional Beamforming Design for Integrated Sensing, Communication, and Computation

Integrated sensing and communication (ISAC) systems may face a heavy computation burden since the sensory data needs to be further processed. This paper studies a novel system that integrates sensing, communication, and computation, aiming to provide services for different objectives efficiently. This system consists of a multi-antenna multi-functional base station (BS), an edge server, a target, and multiple singleantenna communication users. The BS needs to allocate the available resources to efficiently provide sensing, communication, and computation services. Due to the heavy service burden and limited power budget, the BS can partially offload the tasks to the nearby edge server instead of computing them locally. We consider the estimation of the target response matrix, a general problem in radar sensing, and utilize Cramer-Rao bound (CRB) as the corresponding performance metric. To tackle the non-convex optimization problem, we propose both semidefinite relaxation (SDR)-based alternating optimization and SDR-based successive convex approximation (SCA) algorithms to minimize the CRB of radar sensing while meeting the requirement of communication users and the need for task computing. Furthermore, we demonstrate that the optimal rankone solutions of both the alternating and SCA algorithms can be directly obtained via the solver or further constructed even when dealing with multiple functionalities. Simulation results show that the proposed algorithms can provide higher target estimation performance than state-of-the-art benchmarks while satisfying the communication and computation constraints.

eess.SP↗

Optical IRS for Visible Light Communication: Modeling, Design, and Open Issues

Optical intelligent reflecting surface (OIRS) offers a new and effective approach to resolving the line-of-sight blockage issue in visible light communication (VLC) by enabling redirection of light to bypass obstacles, thereby dramatically enhancing indoor VLC coverage and reliability. This article provides a comprehensive overview of OIRS for VLC, including channel modeling, design techniques, and open issues. First, we present the characteristics of OIRS-reflected channels and introduce two practical models, namely, optics model and association model, which are then compared in terms of applicable conditions, configuration methods, and channel parameters. Next, under the more practically appealing association model, we discuss the main design techniques for OIRS-aided VLC systems, including beam alignment, channel estimation, and OIRS reflection optimization. Finally, open issues are identified to stimulate future research in this area.

cs.IT↗

Power Measurement Based Channel Estimation for IRS-Enhanced Wireless Coverage

In this paper, we study an IRS-assisted coverage enhancement problem for a given region, aiming to optimize the passive reflection of the IRS for improving the average communication performance in the region by accounting for both deterministic and random channels in the environment. To this end, we first derive the closed-form expression of the average received signal power in terms of the deterministic base station (BS)-IRS-user cascaded channels over all user locations, and propose an IRS-aided coverage enhancement framework to facilitate the estimation of such deterministic channels for IRS passive reflection design. Specifically, to avoid the exorbitant overhead of estimating the cascaded channels at all possible user locations, a location selection method is first proposed to select only a set of typical user locations for channel estimation by exploiting the channel spatial correlation in the region. To estimate the deterministic cascaded channels at the selected user locations, conventional IRS channel estimation methods require additional pilot signals, which not only results in high system training overhead but also may not be compatible with the existing communication protocols. To overcome this issue, we further propose a single-layer neural network (NN)-enabled IRS channel estimation method in this paper, based on only the average received signal power measurements at each selected location corresponding to different IRS random training reflections, which can be offline implemented in current wireless systems. Numerical results demonstrate that our proposed scheme can significantly improve the coverage performance of the target region and outperform the existing power-measurement-based IRS reflection designs.

cs.IT↗

Channel Estimation for Optical IRS-Assisted VLC System via Spatial Coherence

Optical intelligent reflecting surface (OIRS) has been considered a promising technology for visible light communication (VLC) by constructing visual line-of-sight propagation paths to address the signal blockage issue. However, the existing works on OIRSs are mostly based on perfect channel state information (CSI), whose acquisition appears to be challenging due to the passive nature of the OIRS. To tackle this challenge, this paper proposes a customized channel estimation algorithm for OIRSs. Specifically, we first unveil the OIRS spatial coherence characteristics and derive the coherence distance in closed form. Based on this property, a spatial sampling-based algorithm is proposed to estimate the OIRS-reflected channel, by dividing the OIRS into multiple subarrays based on the coherence distance and sequentially estimating their associated CSI, followed by an interpolation to retrieve the full CSI. Simulation results validate the derived OIRS spatial coherence and demonstrate the efficacy of the proposed OIRS channel estimation algorithm.

cs.IT↗

Channel Estimation for Optical Intelligent Reflecting Surface-Assisted VLC System: A Joint Space-Time Sampling Approach

Optical intelligent reflecting surface (OIRS) has attracted increasing attention due to its capability of overcoming signal blockages in visible light communication (VLC), an emerging technology for the next-generation advanced transceivers. However, current works on OIRS predominantly assume known channel state information (CSI), which is essential to practical OIRS configuration. To bridge such a gap, this paper proposes a new and customized channel estimation protocol for OIRSs under the alignment-based channel model. Specifically, we first unveil OIRS spatial and temporal coherence characteristics and derive the coherence distance and the coherence time in closed form. Next, to achieve fast beam alignment over different coherence time, we propose to dynamically tune the rotational angles of the OIRS reflecting elements following a geometric optics-based non-uniform codebook. Given the above beam alignment, we propose an efficient joint space-time sampling-based algorithm to estimate the OIRS channel. In particular, we divide the OIRS into multiple subarrays based on the coherence distance and sequentially estimate their associated CSI, followed by a spacetime interpolation to retrieve full CSI for other non-aligned transceiver antennas. Numerical results validate our theoretical analyses and demonstrate the efficacy of our proposed OIRS channel estimation scheme as compared to other benchmark schemes.

cs.IT↗

Movable-Antenna Position Optimization: A Graph-based Approach

Fluid antennas (FAs) and movable antennas (MAs) have emerged as promising technologies in wireless communications, which offer the flexibility to improve channel conditions by adjusting transmit/receive antenna positions within a spatial region. In this letter, we focus on an MA-enhanced multiple-input single-output (MISO) communication system, aiming to optimize the positions of multiple transmit MAs to maximize the received signal power. Unlike the prior works on continuously searching for the optimal MA positions, we propose to sample the transmit region into discrete points, such that the continuous antenna position optimization problem is transformed to a discrete sampling point selection problem based on the point-wise channel information. However, such a point selection problem is combinatory and challenging to be optimally solved. To tackle this challenge, we ingeniously recast it as an equivalent fixed-hop shortest path problem in graph theory and propose a customized algorithm to solve it optimally in polynomial time. To further reduce the complexity, a linear-time sequential update algorithm is also proposed to obtain a high-quality suboptimal solution. Numerical results demonstrate that the proposed algorithms can yield considerable performance gains over the conventional fixed-position antennas with/without antenna selection.

cs.IT↗

Intelligent Surfaces Empowered Wireless Network: Recent Advances and The Road to 6G

Intelligent surfaces (ISs) have emerged as a key technology to empower a wide range of appealing applications for wireless networks, due to their low cost, high energy efficiency, flexibility of deployment and capability of constructing favorable wireless channels/radio environments. Moreover, the recent advent of several new IS architectures further expanded their electromagnetic functionalities from passive reflection to active amplification, simultaneous reflection and refraction, as well as holographic beamforming. However, the research on ISs is still in rapid progress and there have been recent technological advances in ISs and their emerging applications that are worthy of a timely review. Thus, we provide in this paper a comprehensive survey on the recent development and advances of ISs aided wireless networks. Specifically, we start with an overview on the anticipated use cases of ISs in future wireless networks such as 6G, followed by a summary of the recent standardization activities related to ISs. Then, the main design issues of the commonly adopted reflection-based IS and their state-of-the-art solutions are presented in detail, including reflection optimization, deployment, signal modulation, wireless sensing, and integrated sensing and communications. Finally, recent progress and new challenges in advanced IS architectures are discussed to inspire futrue research.

cs.IT↗

Multi-Passive/Active-IRS Enhanced Wireless Coverage: Deployment Optimization and Cost-Performance Trade-off

Both passive and active intelligent reflecting surfaces (IRSs) can be deployed in complex environments to enhance wireless network coverage by creating multiple blockage-free cascaded line-of-sight (LoS) links. In this paper, we study a multi-passive/active-IRS (PIRS/AIRS) aided wireless network with a multi-antenna base station (BS) in a given region. First, we divide the region into multiple non-overlapping cells, each of which may contain one candidate location that can be deployed with a single PIRS or AIRS. Then, we show several trade-offs between minimizing the total IRS deployment cost and enhancing the signal-to-noise ratio (SNR) performance over all cells via direct/cascaded LoS transmission with the BS. To reconcile these trade-offs, we formulate a joint multi-PIRS/AIRS deployment problem to select an optimal subset of all candidate locations for deploying IRS and also optimize the number of passive/active reflecting elements deployed at each selected location to satisfy a given SNR target over all cells, such that the total deployment cost is minimized. However, due to the combinatorial optimization involved, the formulated problem is difficult to be solved optimally. To tackle this difficulty, we first optimize the reflecting element numbers with given PIRS/AIRS deployed locations via sequential refinement, followed by a partial enumeration to determine the PIRS/AIRS locations. Simulation results show that our proposed algorithm achieves better cost-performance trade-offs than other baseline deployment strategies.

eess.SP↗