arXiv subjects

Weidong Mei

Publications and source records attributed to Weidong Mei.

At least 91 records · Page 5Linked to original sources

arXiv2023

User Power Measurement Based IRS Channel Estimation via Single-Layer Neural Network

One main challenge for implementing intelligent reflecting surface (IRS) aided communications lies in the difficulty to obtain the channel knowledge for the base station (BS)-IRS-user cascaded links, which is needed to design high-performance IRS reflection in practice. Traditional methods for estimating IRS cascaded channels are usually based on the additional pilot signals received at the BS/users, which increase the system training overhead and also may not be compatible with the current communication protocols. To tackle this challenge, we propose in this paper a new single-layer neural network (NN)-enabled IRS channel estimation method based on only the knowledge of users' individual received signal power measurements corresponding to different IRS random training reflections, which are easily accessible in current wireless systems. To evaluate the effectiveness of the proposed channel estimation method, we design the IRS reflection for data transmission based on the estimated cascaded channels in an IRS-aided multiuser communication system. Numerical results show that the proposed IRS channel estimation and reflection design can significantly improve the minimum received signal-to-noise ratio (SNR) among all users, as compared to existing power measurement based designs.

cs.IT↗

arXiv2023

Joint Beam Routing and Resource Allocation Optimization for Multi-IRS-Reflection Wireless Power Transfer

Intelligent reflecting surface (IRS) can be densely deployed in complex environments to create cascaded line-of-sight (LoS) links between base stations (BSs) and users, which significantly enhance the signal coverage. In this paper, we consider the wireless power transfer (WPT) from a multi-antenna BS to multiple energy users (EUs) by exploiting the signal beam routing via multi-IRS reflections. First, we present a baseline beam routing scheme with each IRS serving at most one EU, where the BS transmits wireless power to all EUs simultaneously while the signals to different EUs undergo disjoint sets of multi-IRS reflection paths. Under this setup, we aim to tackle the joint beam routing and resource allocation optimization problem by jointly optimizing the reflection paths for all EUs, the active/passive beamforming at the BS/each involved IRS, as well as the BS's power allocation for different EUs to maximize the minimum received signal power among all EUs. Next, to further improve the WPT performance, we propose two new beam routing schemes, namely dynamic beam routing and subsurface-based beam routing, where each IRS can serve multiple EUs via different time slots and different subsurfaces, respectively. In particular, we prove that dynamic beam routing outperforms subsurface-based beam routing in terms of minimum harvested power among all EUs. In addition, we show that the optimal performance of dynamic beam routing is achieved by assigning all EUs with orthogonal time slots for WPT. A clique-based optimization approach is also proposed to solve the joint beam routing and resource allocation problems for the baseline beam routing and proposed dynamic beam routing schemes. Numerical results are finally presented, which demonstrate the superior performance of the proposed dynamic beam routing scheme to the baseline scheme.

cs.IT↗

arXiv2023

Multi-Active/Passive-IRS Enabled Wireless Information and Power Transfer: Active IRS Deployment and Performance Analysis

Intelligent reflecting surfaces (IRSs), active and/or passive, can be densely deployed in complex environments to significantly enhance wireless network coverage for both wireless information transfer (WIT) and wireless power transfer (WPT). In this letter, we study the downlink WIT/WPT from a multi-antenna base station to a single-antenna user over a multi-active/passive IRS (AIRS/PIRS)-enabled wireless link. In particular, we aim to optimize the location of the AIRS with those of the other PIRSs being fixed to maximize the received signal-to-noise ratio (SNR) and signal power at the user in the cases of WIT and WPT, respectively. We derive the optimal solutions for these two cases in closed-form, which reveals that the optimal AIRS deployment is generally different for WIT versus WPT. Furthermore, both analytical and numerical results are provided to show the conditions under which the proposed AIRS deployment strategy yields superior performance to other baseline deployment strategies as well as the conventional all- PIRS enabled WIT/WPT.

cs.IT↗

arXiv2023

Joint Base Station and IRS Deployment for Enhancing Network Coverage: A Graph-Based Modeling and Optimization Approach

Intelligent reflecting surface (IRS) can be densely deployed in complex environment to create cascaded line-of-sight (LoS) paths between multiple base stations (BSs) and users via tunable IRS reflections, thereby significantly enhancing the coverage performance of wireless networks. To achieve this goal, it is vital to optimize the deployed locations of BSs and IRSs in the wireless network, which is investigated in this paper. Specifically, we divide the coverage area of the network into multiple non-overlapping cells and decide whether to deploy a BS/IRS in each cell given a total number of BSs/IRSs available. We show that to ensure the network coverage/communication performance, i.e., each cell has a direct/cascaded LoS path with at least one BS, as well as such LoS paths have the average number of IRS reflections less than a given threshold, there is a fundamental trade-off with the deployment cost or the number of BSs/IRSs needed. To optimally characterize this trade-off, we formulate a joint BS and IRS deployment problem based on graph theory, which, however, is difficult to be optimally solved due to the combinatorial optimization involved. To circumvent this difficulty, we first consider a simplified problem with given BS deployment and propose the optimal as well as an efficient suboptimal IRS deployment solution to it, by applying the branch-and-bound method and iteratively removing IRSs from the candidate locations, respectively. Next, an efficient sequential update algorithm is proposed for solving the joint BS and IRS deployment problem. Numerical results are provided to show the efficacy of the proposed design approach and optimization algorithms for the joint BS and IRS deployment. The trade-off between the network coverage performance and the number of deployed BSs/IRSs with different cost ratios is also unveiled.

cs.IT↗

arXiv2023

Beamforming Technologies for Ultra-Massive MIMO in Terahertz Communications

Terahertz (THz) communications with a frequency band $0.1-10$ THz are envisioned as a promising solution to future high-speed wireless communication. Although with tens of gigahertz available bandwidth, THz signals suffer from severe free-spreading loss and molecular-absorption loss, which limit the wireless transmission distance. To compensate for the propagation loss, the ultra-massive multiple-input-multiple-output (UM-MIMO) can be applied to generate a high-gain directional beam by beamforming technologies. In this paper, a review of beamforming technologies for THz UM-MIMO systems is provided. Specifically, we first present the system model of THz UM-MIMO and identify its channel parameters and architecture types. Then, we illustrate the basic principles of beamforming via UM-MIMO and discuss the far-field and near-field assumptions in THz UM-MIMO. Moreover, an important beamforming strategy in THz band, i.e., beam training, is introduced wherein the beam training protocol and codebook design approaches are summarized. The intelligent-reflecting-surface (IRS)-assisted joint beamforming and multi-user beamforming in THz UM-MIMO systems are studied, respectively. The spatial-wideband effect and frequency-wideband effect in the THz beamforming are analyzed and the corresponding solutions are provided. Further, we present the corresponding fabrication techniques and illuminate the emerging applications benefiting from THz beamforming. Open challenges and future research directions on THz UM-MIMO systems are finally highlighted.

cs.IT↗

arXiv2023

Optical Intelligent Reflecting Surface Assisted MIMO VLC: Channel Modeling and Capacity Characterization

Although the multi-antenna or so-called multiple-input multiple-output (MIMO) transmission has been the enabling technology for the past generations of radio-frequency (RF)-based wireless communication systems, its application to the visible light communication (VLC) still faces a critical challenge as the MIMO spatial multiplexing gain can be hardly attained in VLC channels due to their strong spatial correlation. In this paper, we tackle this problem by deploying the optical intelligent reflecting surface (OIRS) in the environment to boost the capacity of MIMO VLC. Firstly, based on the extremely near-field channel condition in VLC, we propose a new channel model for OIRS-assisted MIMO VLC and reveal its peculiar ``no crosstalk'' property, where the OIRS reflecting elements can be respectively configured to align with one pair of transmitter and receiver antennas without causing crosstalk to each other. Next, we characterize the OIRS-assisted MIMO VLC capacities under different practical power constraints and then proceed to maximize them by jointly optimizing the OIRS element alignment and transmitter emission power. In particular, for optimizing the OIRS element alignment, we propose two algorithms, namely, location-aided interior-point algorithm and log-det-based alternating optimization algorithm, to balance the performance versus complexity trade-off; while the optimal transmitter emission power is derived in closed form. Numerical results are provided, which validate the capacity improvement of OIRS-assisted MIMO VLC against the VLC without OIRS and demonstrate the superior performance of the proposed algorithms compared to baseline schemes.

cs.IT↗

arXiv2023

Target-Mounted Intelligent Reflecting Surface for Joint Location and Orientation Estimation

Intelligent reflecting surface (IRS) has been widely recognized as an efficient technique to reconfigure the electromagnetic environment in favor of wireless communication performance. In this paper, we propose a new application of IRS for device-free target sensing via joint location and orientation estimation. In particular, different from the existing works that use IRS as an additional anchor node for localization/sensing, we consider mounting IRS on the sensing target, whereby estimating the IRS's location and orientation as that of the target by leveraging IRS's controllable signal reflection. To this end, we first propose a tensor-based method to acquire essential angle information between the IRS and the sensing transmitter as well as a set of distributed sensing receivers. Next, based on the estimated angle information, we formulate two optimization problems to estimate the location and orientation of the IRS/target, respectively, and obtain the locally optimal solutions to them by invoking two iterative algorithms, namely, gradient descent method and manifold optimization. In particular, we show that the orientation estimation problem admits a closed-form solution in a special case that usually holds in practice. Furthermore, theoretical analysis is conducted to draw essential insights into the proposed sensing system design and performance. Simulation results verify our theoretical analysis and demonstrate that the proposed methods can achieve high estimation accuracy which is close to the theoretical bound.

eess.SP↗

arXiv2022

Empowering Base Stations with Co-Site Intelligent Reflecting Surfaces: User Association, Channel Estimation and Reflection Optimization

Intelligent reflecting surface (IRS) has emerged as a promising technique to enhance wireless communication performance cost effectively. The existing literature has mainly considered IRS being deployed near user terminals to improve their performance. However, this approach may incur a high cost if IRSs need to be densely deployed in the network to cater to random user locations. To avoid such high deployment cost, in this paper we consider a new IRS aided wireless network architecture, where IRSs are deployed in the vicinity of each base station (BS) to assist in its communications with distributed users regardless of their locations. Besides significantly enhancing IRSs' signal coverage, this scheme helps reduce the IRS associated channel estimation overhead as compared to conventional user-side IRSs, by exploiting the nearly static BS-IRS channels over short distance. For this scheme, we propose a new two stage transmission protocol to achieve IRS channel estimation and reflection optimization for uplink data transmission efficiently. In addition, we propose effective methods for solving the user IRS association problem based on long term channel knowledge and the selected user IRS BS cascaded channel estimation problem. Finally, all IRSs' passive reflections are jointly optimized with the BS's multi-antenna receive combining to maximize the minimum achievable rate among all users for data transmission. Numerical results show that the proposed co site IRS empowered BS scheme can achieve significant performance gains over the conventional BS without co site IRS and existing schemes for IRS channel estimation and reflection optimization, thus enabling an appealing low cost and high performance BS design for future wireless networks.

cs.IT↗

arXiv2022

Intelligent Reflecting Surface Aided Wireless Networks: From Single-Reflection to Multi-Reflection Design and Optimization

Intelligent reflecting surface (IRS) has emerged as a promising technique for wireless communication networks. By dynamically tuning the reflection amplitudes/phase shifts of a large number of passive elements, IRS enables flexible wireless channel control and configuration, and thereby enhances the wireless signal transmission rate and reliability significantly. Despite the vast literature on designing and optimizing assorted IRS-aided wireless systems, prior works have mainly focused on enhancing wireless links with single signal reflection only by one or multiple IRSs, which may be insufficient to boost the wireless link capacity under some harsh propagation conditions (e.g., indoor environment with dense blockages/obstructions). This issue can be tackled by employing two or more IRSs to assist each wireless link and jointly exploiting their single as well as multiple signal reflections over them. However, the resultant double-/multi-IRS aided wireless systems face more complex design issues as well as new practical challenges for implementation as compared to the conventional single-IRS counterpart, in terms of IRS reflection optimization, channel acquisition, as well as IRS deployment and association/selection. As such, a new paradigm for designing multi-IRS cooperative passive beamforming and joint active/passive beam routing arises which calls for innovative design approaches and optimization methods. In this paper, we give a tutorial overview of multi-IRS aided wireless networks, with an emphasis on addressing the new challenges due to multi-IRS signal reflection and routing. Moreover, we point out important directions worthy of research and investigation in the future.

cs.IT↗

arXiv2022

How to Deploy Intelligent Reflecting Surfaces in Wireless Network: BS-side, User-side, or Both Sides?

The performance of wireless communication systems is fundamentally constrained by the random and uncontrollable wireless channel. By leveraging the recent advance in digitally-controlled metasurface, intelligent reflecting surface (IRS) has emerged as a promising solution to enhance the wireless network performance by smartly reconfiguring the radio propagation environment. Despite the substantial research on IRS-aided communications, this article addresses the important issue of how to deploy IRSs in a wireless network to achieve its optimum performance. We first compare the two conventional strategies of deploying IRS at the side of base station or distributed users in terms of various communication performance metrics, and then propose a new hybrid IRS deployment strategy by combining their complementary advantages. Moreover, the main challenges in optimizing IRS deployment as well as their promising solutions are discussed. A case study is also presented to compare the performance of different IRS deployment strategies and draw useful insights for practical design.

cs.IT↗

arXiv2022

Intelligent Reflecting Surface for Multi-Path Beam Routing with Active/Passive Beam Splitting and Combining

Intelligent reflecting surface (IRS) can be densely deployed in wireless networks to significantly enhance the communication channels. In this letter, we consider the downlink transmission from a multi-antenna base station (BS) to a single-antenna user, by exploiting the cooperative passive beamforming (CPB) and line-of-sight (LoS) path diversity gains of multi-IRS signal reflection. Unlike existing works where only one single multi-IRS reflection path from the BS to user is selected, we propose a new and more general multi-path beam routing scheme. Specifically, the BS sends the user's information signal via multiple orthogonal active beams (termed as active beam splitting), which point towards different IRSs. Then, these beamed signals are subsequently reflected by selected IRSs via their CPB in different paths, and finally coherently combined at the user's receiver (thus named {\it \textbf{passive beam combining}}). For this scheme, we formulate a new multi-path beam routing design problem to jointly optimize the number of IRS reflection paths, the selected IRSs for each of the reflection paths, the active/passive beamforming at the BS/each selected IRS, as well as the BS's power allocation over different active beams, so as to maximize the received signal power at the user. To solve this challenging problem, we first derive the optimal BS/IRS beamforming and BS power allocation for a given set of reflection paths. The clique-based approach in graph theory is then applied to solve the remaining multi-path selection problem efficiently. Simulation results show that our proposed multi-path beam routing scheme significantly outperforms its conventional single-path beam routing special case.

cs.IT↗

arXiv2022

A Survey on Channel Estimation and Practical Passive Beamforming Design for Intelligent Reflecting Surface Aided Wireless Communications

Intelligent reflecting surface (IRS) has emerged as a key enabling technology to realize smart and reconfigurable radio environment for wireless communications, by digitally controlling the signal reflection via a large number of passive reflecting elements in real-time. Different from conventional wireless communication techniques that only adapt to but have no or limited control over dynamic wireless channels, IRS provides a new and cost-effective means to combat the wireless channel impairments in a proactive manner. However, despite its great potential, IRS faces new and unique challenges in its efficient integration into wireless communication systems, especially its channel estimation and passive beamforming design under various practical hardware constraints. In this paper, we provide a comprehensive survey on the up-to-date research in IRS-aided wireless communications, with an emphasis on the promising solutions to tackle practical design issues. Furthermore, we discuss new and emerging IRS architectures and applications as well as their practical design problems to motivate future research.

cs.IT↗

arXiv2021

Multi-Beam Multi-Hop Routing for Intelligent Reflecting Surfaces Aided Massive MIMO

Intelligent reflecting surface (IRS) is envisioned to play a significant role in future wireless communication systems as an effective means of reconfiguring the radio signal propagation environment. In this paper, we study a new multi-IRS aided massive multiple-input multiple-output (MIMO) system, where a multi-antenna BS transmits independent messages to a set of remote single-antenna users using orthogonal beams that are subsequently reflected by different groups of IRSs via their respective multi-hop passive beamforming over pairwise line-of-sight (LoS) links. We aim to select optimal IRSs and their beam routing path for each of the users, along with the active/passive beamforming at the BS/IRSs, such that the minimum received signal power among all users is maximized. This problem is particularly difficult to solve due to a new type of path separation constraints for avoiding the IRS-reflected signal induced interference among different users. To tackle this difficulty, we first derive the optimal BS/IRS active/passive beamforming solutions based on their practical codebooks given the reflection paths. Then we show that the resultant multi-beam multi-hop routing problem can be recast as an equivalent graph-optimization problem, which is however NP-complete. To solve this challenging problem, we propose an efficient recursive algorithm to partially enumerate the feasible routing solutions, which is able to effectively balance the performance-complexity trade-off. Numerical results demonstrate that the proposed algorithm achieves near-optimal performance with low complexity and outperforms other benchmark schemes. Useful insights into the optimal multi-beam multi-hop routing design are also drawn under different setups of the multi-IRS aided massive MIMO network.

cs.IT↗

arXiv2021

Distributed Beam Training for Intelligent Reflecting Surface Enabled Multi-Hop Routing

Intelligent reflecting surface (IRS) is an emerging technology to enhance the spectral and energy efficiency of wireless communications cost-effectively. This letter considers a new multi-IRS aided wireless network where a cascaded line-of-sight (LoS) link is established between the base station (BS) and a remote user by leveraging the multi-hop signal reflection of selected IRSs. As compared to the conventional single-/double-hop IRS system, multi-hop IRS system provides more pronounced path diversity and cooperative passive beamforming gains, especially in the environment with dense obstacles. However, a more challenging joint active/passive beamforming and multi-hop beam routing problem also arises for maximizing the end-to-end channel gain. Furthermore, the number of IRS-associated channel coefficients increases drastically with the number of IRS hops. To tackle the above issues, in this letter we propose a new and efficient beam training based solution by considering the use of practical codebook-based BS/IRS active/passive beamforming without the need of explicit channel estimation. Instead of exhaustively or sequentially searching over all combinations of active and passive beam patterns for each beam route, a distributed beam training scheme is proposed to reduce the complexity, by exploiting the (nearly) time-invariant BS-IRS and inter-IRS channels and the cooperative training among the BS and IRSs' controllers. Simulation results show that our proposed design achieves the end-to-end channel gain close to that of the sequential beam search, but at a much lower training overhead and complexity.

cs.IT↗

arXiv2021

Performance Analysis and User Association Optimization for Wireless Network Aided by Multiple Intelligent Reflecting Surfaces

Intelligent reflecting surface (IRS) is deemed as a promising solution to improve the spectral and energy efficiency of wireless communications cost-effectively. In this paper, we consider a wireless network where multiple base stations (BSs) serve their respective users with the aid of distributed IRSs in the downlink communication. Specifically, each IRS assists in the transmission from its associated BS to user via passive beamforming, while in the meantime, it also randomly scatters the signals from other co-channel BSs, thus resulting in additional signal as well as interference paths in the network. As such, a new IRS-user/BS association problem arises pertaining to optimally balance the passive beamforming gains from all IRSs among different BS-user communication links. To address this new problem, we first derive a tractable lower bound of the average signal-to-interference-plus-noise ratio (SINR) at the receiver of each user, termed average-signal-to-average-interference-plus-noise ratio (ASAINR), based on which two ASAINR balancing problems are formulated to maximize the minimum ASAINR among all users by optimizing the IRS-user associations without and with BS transmit power control, respectively. We also characterize the scaling behavior of user ASAINRs with the increasing number of IRS reflecting elements to investigate the different effects of IRS-reflected signal versus interference power. Moreover, to solve the two ASAINR balancing problems that are both non-convex optimization problems, we propose an optimal solution to the problem without BS power control and low-complexity suboptimal solutions to both problems by applying the branch-and-bound method and exploiting new properties of the IRS-user associations, respectively. Numerical results verify our performance analysis and also demonstrate significant performance gains of the proposed solutions over benchmark schemes.

cs.IT↗

arXiv2021

Cooperative Multi-Beam Routing for Multi-IRS Aided Massive MIMO

Intelligent reflecting surface (IRS) is envisioned to play a significant role in future wireless communication systems thanks to its powerful capability of enabling smart and reconfigurable radio environment. In this paper, we study the multi-IRS aided downlink communication in a massive multiple-input multiple-output (MIMO) system, where a multi-antenna BS simultaneously serves multiple remote single-antenna users with orthogonal beams reflected by multiple IRSs. By exploiting the line-of-sight (LoS) link between each pair of selected IRSs, a multi-hop cascaded LoS link can be established between the BS and each user via their cooperative beam routing. Under this setup, we optimize the selected IRSs and their beam routing path for each user, along with the BS/IRS active/passive beamforming such that the minimum received signal power among all users is maximized, subject to a new multi-beam routing path separation constraint for avoiding the inter-user/route interference. To tackle this problem, we first derive the optimal BS/IRS active/passive beamforming in closed-form for any given beam routes and show the beam routing optimization is NP-complete by recasting it as an equivalent graph-optimization problem. To solve this challenging problem, we then propose an efficient recursive algorithm to partially enumerate the feasible solutions, which effectively balances the performance-complexity trade-off by tuning its design parameter. Numerical results demonstrate that the proposed algorithm can achieve near-optimal performance with low enumeration complexity and also outperform other benchmark schemes.

cs.IT↗

arXiv2021

Aerial-Ground Interference Mitigation for Cellular-Connected UAV

To support large-scale deployment of unmanned aerial vehicles (UAVs) in future, a new wireless communication paradigm, namely, cellular-connected UAV, has recently received an upsurge of interests in both academia and industry. Specifically, cellular base stations (BSs) and spectrum are reused to serve UAVs as new aerial user equipments (UEs) for meeting their communication requirements. However, compared to traditional terrestrial UEs, the high altitude of UAVs results in more frequent line-of-sight (LoS) channels with both their associated and non-associated BSs in a much wider area, which causes stronger aerial-ground interference to both UAVs and terrestrial UEs. As such, conventional techniques designed for mitigating the terrestrial interference become ineffective in coping with the new and more severe UAV-terrestrial interference. To tackle this challenge, we propose in this article new interference mitigation solutions for achieving spectral efficient operation of the cellular network with co-existing UAVs and terrestrial UEs. In particular, we exploit the powerful sensing capability of UAVs and inactive BSs in the network for interference mitigation/cancellation. Numerical results are presented to verify the efficacy of the proposed solutions and show their significant spectrum efficiency gains over terrestrial interference mitigation techniques.

cs.IT↗

arXiv2020

Cooperative Beam Routing for Multi-IRS Aided Communication

Intelligent reflecting surface (IRS) has been deemed as a transformative technology to achieve smart and reconfigurable environment for wireless communication. This letter studies a new IRS-aided communication system, where multiple IRSs assist in the communication between a multi-antenna base station (BS) and a remote single-antenna user by multi-hop signal reflection. Specifically, by exploiting the line-of-sight (LoS) link between nearby IRSs, a multi-hop cascaded LoS link between the BS and user is established where a set of IRSs are selected to successively reflect the BS's signal, so that the received signal power at the user is maximized. To tackle this new problem, we first present the closed-form solutions for the optimal active and cooperative passive beamforming at the BS and selected IRSs, respectively, for a given beam route. Then, we derive the end-to-end channel power, which unveils a fundamental trade-off in the optimal beam routing design between maximizing the multiplicative passive beamforming gain and minimizing the multi-reflection path loss. To reconcile this trade-off, we recast the IRS selection and beam routing problem as an equivalent shortest simple-path problem in graph theory and solve it optimally. Numerical results show significant performance gains of the proposed algorithm over benchmark schemes and also draw useful insights into the optimal beam routing design.

cs.IT↗