arXiv subjects

Weiwei Li

Publications and source records attributed to Weiwei Li.

At least 37 records · Page 2Linked to original sources

arXiv2025

Impact of coherent wiggler radiation impedance in Tau-Charm factories

Coherent synchrotron radiation (CSR) has long been recognized as a significant source of longitudinal impedance driving microwave instability in electron storage rings. In the pursuit of higher luminosity, next-generation circular $e^+e^-$ colliders operating in the few-GeV energy range, such as B-factories and Tau-Charm factories, are being designed with low-emittance beams and high beam currents. Damping wigglers are commonly introduced to reduce damping times and control beam emittance. In this study, we systematically investigate the impact of coherent wiggler radiation (CWR), a specific form of CSR generated within wigglers, on beam stability in Tau-Charm factories. We revisit the threshold conditions for CWR-induced microwave instability and evaluate its effects under realistic lattice configurations of collider rings. Furthermore, we examine theoretical models of longitudinal CWR impedance and identify improved formulations that better capture its influence. As an illustrative example, the developed CWR impedance models are applied to simulate beam stability in the Super Tau-Charm Facility currently under design in China.

physics.acc-ph↗

arXiv2025

Conceptual Design Report of Super Tau-Charm Facility: The Accelerator

Electron-positron colliders operating in the GeV region of center-of-mass energies or the Tau-Charm energy region, have been proven to enable competitive frontier research, due to its several unique features. With the progress of high energy physics in the last two decades, a new-generation Tau-Charm factory, Super Tau Charm Facility (STCF) has been actively promoting by the particle physics community in China. STCF holds great potential to address fundamental questions such as the essence of color confinement and the matter-antimatter asymmetry in the universe in the next decades. The main design goals of STCF are with a center-of-mass energy ranging from 2 to 7 GeV and a peak luminosity surpassing 5*10^34 cm^-2s^-1 that is optimized at a center-of-mass energy of 4 GeV, which is about 50 times that of the currently operating Tau-Charm factory - BEPCII. The STCF accelerator is composed of two main parts: a double-ring collider with the crab-waist collision scheme and an injector that provides top-up injections for both electron and positron beams. As a typical third-generation electron-positron circular collider, the STCF accelerator faces many challenges in both accelerator physics and technology. In this paper, the conceptual design of the STCF accelerator complex is presented, including the ongoing efforts and plans for technological R&D, as well as the required infrastructure. The STCF project aims to secure support from the Chinese central government for its construction during the 15th Five-Year Plan (2026-2030) in China.

physics.acc-ph↗

arXiv2025

Large Model Empowered Metaverse: State-of-the-Art, Challenges and Opportunities

The Metaverse represents a transformative shift beyond traditional mobile Internet, creating an immersive, persistent digital ecosystem where users can interact, socialize, and work within 3D virtual environments. Powered by large models such as ChatGPT and Sora, the Metaverse benefits from precise large-scale real-world modeling, automated multimodal content generation, realistic avatars, and seamless natural language understanding, which enhance user engagement and enable more personalized, intuitive interactions. However, challenges remain, including limited scalability, constrained responsiveness, and low adaptability in dynamic environments. This paper investigates the integration of large models within the Metaverse, examining their roles in enhancing user interaction, perception, content creation, and service quality. To address existing challenges, we propose a generative AI-based framework for optimizing Metaverse rendering. This framework includes a cloud-edge-end collaborative model to allocate rendering tasks with minimal latency, a mobility-aware pre-rendering mechanism that dynamically adjusts to user movement, and a diffusion model-based adaptive rendering strategy to fine-tune visual details. Experimental results demonstrate the effectiveness of our approach in enhancing rendering efficiency and reducing rendering overheads, advancing large model deployment for a more responsive and immersive Metaverse.

cs.CY↗

arXiv2025

Optics design of the Super Tau-Charm Facility collider rings

The Super Tau-Charm Facility (STCF), China's next-generation electron-positron collider, targets an unprecedented luminosity exceeding 5x10^34 cm^-2 s^-1 at a center-of-mass energy of 4 GeV. The implementation of a submillimeter vertical beta function at interaction point (< 1 mm) and crab-waist collision scheme in this low-energy regime introduces critical challenges through severe nonlinear effects that constrain dynamic aperture and degrade Touschek lifetime. To address these constraints, we propose a novel quasi-two-fold symmetric lattice design integrating several synergistic features: Linear optics optimization minimizing the H-invariant around the ring to maximize local momentum acceptance (LMA); Up to third-order of local chromaticity correction in the interaction region combined with second-order achromatic arc optics, enhancing off-momentum beam dynamics; Configured FODO arc structure with interleaved sextupole groups satisfying -I transformation, suppressing third-order geometric aberrations while optimizing Montague function distributions; Advanced final focus system integrating chromatic sextupoles, crab sextupoles, and strategically positioned octupoles to counteract final quadrupole fringe fields. Furthermore, we develop a multi-objective genetic algorithm using the in-house toolkit PAMKIT to simultaneously optimize 46 sextupole families, maximizing both dynamic aperture and momentum bandwidth. Optics performance is evaluated under error conditions with appropriate corrections, ensuring robust beam dynamics.

physics.acc-ph↗

arXiv2025

Dynamic Fault Analysis in Substations Based on Knowledge Graphs

To address the challenge of identifying hidden danger in substations from unstructured text, a novel dynamic analysis method is proposed. We first extract relevant information from the unstructured text, and then leverages a flexible distributed search engine built on Elastic-Search to handle the data. Following this, the hidden Markov model is employed to train the data within the engine. The Viterbi algorithm is integrated to decipher the hidden state sequences, facilitating the segmentation and labeling of entities related to hidden dangers. The final step involves using the Neo4j graph database to dynamically create a knowledge graph that visualizes hidden dangers in the substation. The effectiveness of the proposed method is demonstrated through a case analysis from a specific substation with hidden dangers revealed in the text records.

cs.CL↗

arXiv2025

Impact of short-range wakefields from radio-frequency cavity resonant modes on bunch lengthening

The high-performance operation of fourth-generation synchrotron light sources critically depends on harmonic cavities (HCs) to alleviate statistical collective effects through bunch lengthening. Active HCs are preferred over passive ones for achieving theoretically optimum bunch lengthening in Timing-mode operation, which is characterized by low average current and high bunch charge. This advantage stems from their ability to control cavity voltages via generator current. However, this study reveals a previously overlooked limitation: the detrimental impact of short-range wakefields from RF cavity resonant modes on bunch lengthening at high bunch charge. Using Hefei Advanced Light Facility parameters, we demonstrate that these wakefields can significantly degrade bunch lengthening. Further analysis with PETRA-IV parameters reveals that fine-tuning the HC voltage can optimize bunch lengthening. Notably, under specific HC settings, there exists two equilibrium bunch distributions. Our findings highlight the critical influence of RF cavity short-range wakefields on beam dynamics at high bunch charge, emphasizing their essential inclusion in the evaluation and optimization of HC performance for new-generation synchrotron light sources.

physics.acc-ph↗

arXiv2025

FineCops-Ref: A new Dataset and Task for Fine-Grained Compositional Referring Expression Comprehension

Referring Expression Comprehension (REC) is a crucial cross-modal task that objectively evaluates the capabilities of language understanding, image comprehension, and language-to-image grounding. Consequently, it serves as an ideal testing ground for Multi-modal Large Language Models (MLLMs). In pursuit of this goal, we have established a new REC dataset characterized by two key features: Firstly, it is designed with controllable varying levels of difficulty, necessitating multi-level fine-grained reasoning across object categories, attributes, and multi-hop relationships. Secondly, it includes negative text and images created through fine-grained editing and generation based on existing data, thereby testing the model's ability to correctly reject scenarios where the target object is not visible in the image--an essential aspect often overlooked in existing datasets and approaches. Utilizing this high-quality dataset, we conducted comprehensive evaluations of both state-of-the-art specialist models and MLLMs. Our findings indicate that there remains a significant gap in achieving satisfactory grounding performance. We anticipate that our dataset will inspire new approaches to enhance visual reasoning and develop more advanced cross-modal interaction strategies, ultimately unlocking the full potential of MLLMs. Our code and the datasets are available at https://github.com/liujunzhuo/FineCops-Ref.

cs.CV↗

arXiv2023

Far-field Petahertz Sampling of Plasmonic Fields

The collective response of metal nanostructures to optical excitation leads to localized plasmon generation with nanoscale field confinement driving applications in e.g. quantum optics, optoelectronics, and nanophotonics, where a bottleneck is the ultrafast loss of coherence by different damping channels. The present understanding is built-up on indirect measurements dictated by the extreme timescales involved. Here, we introduce a straightforward field sampling method that allows to measure the plasmonic field of arbitrary nanostructures in the most relevant petahertz regime. We compare experimental data for colloidal nanoparticles to finite-difference-time-domain calculations, which show that the dephasing of the plasmonic excitation can be resolved with sub-cycle resolution. Furthermore, we observe a substantial reshaping of the spectral phase of the few-cycle pulse induced by this collective excitation and we demonstrate ad-hoc pulse shaping by tailoring the plasmonic sample. The results pave the way towards both a fundamental understanding of ultrafast energy transformation in nanosystems and practical applications of nanostructures in extreme scale spatio-temporal control of light.

physics.optics↗

arXiv2023

Analytic formulas for the D-mode Robinson instability

The passive superconducting harmonic cavity (PSHC) scheme is adopted by several existing and future synchrotron light source storage rings, as it has a relatively smaller R/Q and a relatively larger quality factor (Q), which can effectively reduce the beam-loading effect and suppress the mode-one instability. Based on the mode-zero Robinson instability equation of uniformly filled rigid bunches and a search algorithm for minimum, we have revealed that the PSHC fundamental mode with a large loaded-Q possibly triggers the D-mode Robinson instability [T. He, et al., Mode-zero Robinson instability in the presence of passive superconducting harmonic cavities, PRAB 26, 064403 (2023)]. This D-mode Robinson instability is unique because it is anti-damped by the radiation-damping effect. In this paper, analytical formulas for the frequency and growth rate of the D-mode Robinson instability are derived with several appropriate approximations. These analytical formulas will facilitate analyzing and understanding the D-mode Robinson instability. Most importantly, useful formulas for the D-mode threshold detuning calculation have finally been found.

physics.acc-ph↗

arXiv2023

Terahertz scale microbunching instability driven by nonevaporable getter coating resistive-wall impedance

Non-evaporable getter (NEG) coating is widely required in the next generation of light sources and circular $e^+e^-$ colliders for small vacuum pipes to improve the vacuum level, which, however, also enhances the high-frequency resistive-wall impedance and often generates a resonator-like peak in the terahertz frequency region. In this paper, we will use the parameters of the planned Hefei Advanced Light Facility (HALF) storage ring to study the impact of NEG coating resistive-wall impedance on the longitudinal microwave instability via particle tracking simulation. Using different NEG coating parameters (resistivity and thickness) as examples, we find that the impedance with a narrow and strong peak in the high frequency region can cause micro-bunching instability, which has a low instability threshold current and contributes to a large energy spread widening above the threshold. In order to obtain a convergent simulation of the beam dynamics, one must properly resolve such a peak. The coating with a lower resistivity has a much less sharp peak in its impedance spectrum, which is helpful to suppress the micro-bunching instability and in return contributes to a weaker microwave instability.

physics.acc-ph↗

arXiv2023

Efficient current-induced spin torques and field-free magnetization switching in a room-temperature van der Waals magnet

The discovery of magnetism in van der Waals (vdW) materials has established unique building blocks for the research of emergent spintronic phenomena. In particular, owing to their intrinsically clean surface without dangling bonds, the vdW magnets hold the potential to construct a superior interface that allows for efficient electrical manipulation of magnetism. Despite several attempts in this direction, it usually requires a cryogenic condition and the assistance of external magnetic fields, which is detrimental to the real application. Here, we fabricate heterostructures based on Fe3GaTe2 flakes that possess room-temperature ferromagnetism with excellent perpendicular magnetic anisotropy. The current-driven non-reciprocal modulation of coercive fields reveals a high spin-torque efficiency in the Fe3GaTe2/Pt heterostructures, which further leads to a full magnetization switching by current. Moreover, we demonstrate the field-free magnetization switching resulting from out-of-plane polarized spin currents by asymmetric geometry design. Our work could expedite the development of efficient vdW spintronic logic, memory and neuromorphic computing devices.

cond-mat.mtrl-sci↗

arXiv2022

Resonance effects in Brunel harmonic generation in thin film organic semiconductors

Organic semiconductors have attracted extensive attention due to their excellent optical and electronic properties. Here, we present an experimental and theoretical study of Brunel harmonic generation in two types of porphyrin thin films: tetraphenylporphyrin (TPP) and its organometallic complex derivative Zinc tetraphenylporphyrin (ZnTPP). Our results show that the $π$-$π^\ast$ excitation of the porphyrin ringsystem plays a major role in the harmonic generation process. We uncovered the contribution of an interband process to Brunel harmonic generation. In particular, the resonant ($S_0 \rightarrow S_2$ transition) enhanced multiphoton excitation is found to lead to an early onset of non-perturbative behavior for the 5th harmonic. Similar resonance effects are expected in Brunel harmonic generation with other organic materials.

physics.optics↗

arXiv2022

Linear and Nonlinear Optical Properties of Iridium Nanoparticles by Atomic Layer deposition

Nonlinear optical phenomena enable novel photonic and optoelectronic applications. Especially metallic nanoparticles and thin films with nonlinear optical properties offer the potential for micro-optical system integration. For this purpose, new nonlinear materials need to be continuously identified, investigated, and utilized for nonlinear optical applications. While noble metal nanoparticles, nanostructures, and thin films of Ag and Au were widely studied, iridium (Ir) nanoparticles and ultra-thin films have not been investigated yet. Here, we present a combined theoretical and experimental study on the linear and nonlinear optical properties of Ir nanoparticles deposited by atomic layer deposition (ALD). Linear optical constants, i.e., the effective refractive index n and extinction coefficient k, were evaluated at different growth stages of nanoparticle formation. Both linear and nonlinear optical properties of these Ir ALD coatings were calculated theoretically using Bruggeman and Maxwell-Garnett theories. The third-order susceptibility of Ir nanoparticle samples was experimentally investigated using the Z-scan technique. Overall, our studies demonstrate the potential of ultrathin Ir NPs as an alternative nonlinear optical material at an atomic scale.

physics.optics↗

arXiv2022

Interpretable Personalized Experimentation

Black-box heterogeneous treatment effect (HTE) models are increasingly being used to create personalized policies that assign individuals to their optimal treatments. However, they are difficult to understand, and can be burdensome to maintain in a production environment. In this paper, we present a scalable, interpretable personalized experimentation system, implemented and deployed in production at Meta. The system works in a multiple treatment, multiple outcome setting typical at Meta to: (1) learn explanations for black-box HTE models; (2) generate interpretable personalized policies. We evaluate the methods used in the system on publicly available data and Meta use cases, and discuss lessons learnt during the development of the system.

cs.LG↗

arXiv2022

Efficient and ultra-stable perovskite light-emitting diodes

Perovskite light-emitting diodes (PeLEDs) have emerged as a strong contender for next-generation display and information technologies. However, similar to perovskite solar cells, the poor operational stability remains the main obstacle toward commercial applications. Here we demonstrate ultra-stable and efficient PeLEDs with extraordinary operational lifetimes (T50) of 1.0x10^4 h, 2.8x10^4 h, 5.4x10^5 h, and 1.9x10^6 h at initial radiance (or current densities) of 3.7 W/sr/m2 (~5 mA/cm2), 2.1 W/sr/m2 (~3.2 mA/cm2), 0.42 W/sr/m2 (~1.1 mA/cm2), and 0.21 W/sr/m2 (~0.7 mA/cm2) respectively, and external quantum efficiencies of up to 22.8%. Key to this breakthrough is the introduction of a dipolar molecular stabilizer, which serves two critical roles simultaneously. First, it prevents the detrimental transformation and decomposition of the alpha-phase FAPbI3 perovskite, by inhibiting the formation of lead and iodide intermediates. Secondly, hysteresis-free device operation and microscopic luminescence imaging experiments reveal substantially suppressed ion migration in the emissive perovskite. The record-long PeLED lifespans are encouraging, as they now satisfy the stability requirement for commercial organic LEDs (OLEDs). These results remove the critical concern that halide perovskite devices may be intrinsically unstable, paving the path toward industrial applications.

cond-mat.mtrl-sci↗

arXiv2022

Charge Transport in Mixed Metal Halide Perovskite Semiconductors

Investigation of the inherent field-driven charge transport behaviour of 3D lead halide perovskites has largely remained a challenging task, owing primarily to undesirable ionic migration effects near room temperature. In addition, the presence of methylammonium in many high performing 3D perovskite compositions introduces additional instabilities, which limit reliable room temperature optoelectronic device operation. Here, we address both these challenges and demonstrate that field-effect transistors (FETs) based on methylammonium-free, mixed-metal (Pb/Sn) perovskite compositions, that are widely studied for solar cell and light-emitting diode applications, do not suffer from ion migration effects as their pure Pb counterparts and reliably exhibit hysteresis free p-type transport with high mobility reaching 5.4 $cm^2/Vs$, ON/OFF ratio approaching $10^6$, and normalized channel conductance of 3 S/m. The reduced ion migration is also manifested in an activated temperature dependence of the field-effect mobility with low activation energy, which reflects a significant density of shallow electronic defects. We visualize the suppressed in-plane ionic migration in Sn-containing perovskites compared to their pure-Pb counterparts using photoluminescence microscopy under bias and demonstrate promising voltage and current-stress device operational stabilities. Our work establishes FETs as an excellent platform for providing fundamental insights into the doping, defect and charge transport physics of mixed-metal halide perovskite semiconductors to advance their applications in optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2021

Tuneable vertical hysteresis loop shift in Ni80Fe20/SrRuO3 heterostructures

A novel vertical hysteresis loop shift is observed for a bilayer thin film of Ni80Fe20/SrRuO3 (1:2 thickness ratio) on SrTiO3 substrate, after field cooled through the Curie temperature ~125 K of SrRuO3, whereas no shift is found for zero field cooled measurement. The vertical shift is noticed below ~125 K which increases with decreasing temperature and reaches a maximum of 33% at 2 K. The vertical shift is modelled closely using micromagnetic simulations. It is shown that the amount of vertical shift depends on the competition between the relative thicknesses and the anisotropies of the two films governed by Spring Thickness law and Imperial Law, respectively. We propose a generalized model of vertical shift which is applicable for other material systems, and hence could be informative for use of vertical shift in future spintronic devices.

cond-mat.mtrl-sci↗

arXiv2021

Provable Data Clustering via Innovation Search

This paper studies the subspace clustering problem in which data points collected from high-dimensional ambient space lie in a union of linear subspaces. Subspace clustering becomes challenging when the dimension of intersection between subspaces is large and most of the self-representation based methods are sensitive to the intersection between the span of clusters. In sharp contrast to the self-representation based methods, a recently proposed clustering method termed Innovation Pursuit, computed a set of optimal directions (directions of innovation) to build the adjacency matrix. This paper focuses on the Innovation Pursuit Algorithm to shed light on its impressive performance when the subspaces are heavily intersected. It is shown that in contrast to most of the existing methods which require the subspaces to be sufficiently incoherent with each other, Innovation Pursuit only requires the innovative components of the subspaces to be sufficiently incoherent with each other. These new sufficient conditions allow the clusters to be strongly close to each other. Motivated by the presented theoretical analysis, a simple yet effective projection based technique is proposed which we show with both numerical and theoretical results that it can boost the performance of Innovation Pursuit.

cs.LG↗