arXiv subjects

Weiwei Li

Publications and source records attributed to Weiwei Li.

49 records · Page 3Linked to original sources

arXiv2020

Identifying and reducing interfacial losses to enhance color-pure electroluminescence in blue-emitting perovskite nanoplatelet light-emitting diodes

Perovskite nanoplatelets (NPls) hold great promise for light-emitting applications, having achieved high photoluminescence quantum efficiencies (PLQEs) approaching unity in the blue wavelength range, where other metal-halide perovskites have typically been ineffective. However, the external quantum efficiency (EQE) of blue-emitting NPl light-emitting diodes (LEDs) have only reached 0.12%, with typical values well below 0.1%. In this work, we show that the performance of NPl LEDs is primarily hindered by a poor electronic interface between the emitter and hole-injector. Through Kelvin Probe and X-ray photoemission spectroscopy measurements, we reveal that the NPls have remarkably deep ionization potentials (>=6.5 eV), leading to large barriers for hole injection, as well as substantial non-radiative decay at the interface between the emitter and hole-injector. We find that an effective way to reduce these non-radiative losses is by using poly(triarylamine) interlayers. This results in an increase in the EQE of our blue LEDs emitting at 464 nm wavelength to 0.3%. We find that our results can be generalized to thicker sky-blue-emitting NPls, where we increase the EQE to 0.55% using the poly(triarylamine) interlayer. Our work also identifies the key challenges for further efficiency increases.

physics.optics↗

arXiv2020

Evidence of Rotational Fröhlich Coupling in Polaronic Trions

Electrons commonly couple through Fröhlich interactions with longitudinal optical phonons to form polarons. However, trions possess a finite angular momentum and should therefore couple instead to rotational optical phonons. This creates a polaronic trion whose binding energy is determined by the crystallographic orientation of the lattice. Here, we demonstrate theoretically within the Fröhlich approach and experimentally by photoluminescence emission that the bare trion binding energy (20 meV) is significantly enhanced by the phonons at the interface between the two-dimensional semiconductor MoS$_2$ and the bulk transition metal oxide SrTiO$_3$. The low-temperature {binding energy} changes from 60 meV in [001]-oriented substrates to 90 meV for [111] orientation, as a result of the counter-intuitive interplay between the rotational axis of the MoS$_2$ trion and that of the SrTiO$_3$ phonon mode.

cond-mat.mes-hall↗

arXiv2020

Subspace Clustering through Sub-Clusters

The problem of dimension reduction is of increasing importance in modern data analysis. In this paper, we consider modeling the collection of points in a high dimensional space as a union of low dimensional subspaces. In particular we propose a highly scalable sampling based algorithm that clusters the entire data via first spectral clustering of a small random sample followed by classifying or labeling the remaining out of sample points. The key idea is that this random subset borrows information across the entire data set and that the problem of clustering points can be replaced with the more efficient and robust problem of "clustering sub-clusters". We provide theoretical guarantees for our procedure. The numerical results indicate we outperform other state-of-the-art subspace clustering algorithms with respect to accuracy and speed.

stat.ML↗

arXiv2020

Smith-Purcell radiation from a charge moving above a finite-length grating with rectangular profiles

Smith-Purcell radiation is generated by a charged particle beam passing close to the surface of a diffraction grating which has a strong dependency of the emitted radiation intensity on the form of the grating profile. For relativistic electron beam, it is important to take into account the number of grating periods in practical SPR setups. In this paper, the theoretical investigations of Smith-Purcell radiation from a three-dimensional bunch of relativistic electrons that moves at constant speed parallel to an electrically perfectly conducting grating with finite rectangular grooves are carried out by using the modal matching method. This model may offer a new efficient tool for terahertz production by SPR interaction and for nondestructive bunch-length measurements by SPR.

physics.acc-ph↗

arXiv2020

Printed high-mobility p-type buffer layers on perovskite photovoltaics for efficient semi-transparent devices

Perovskite solar cells (PSCs) with transparent electrodes can be integrated with existing solar panels in tandem configurations to increase the power conversion efficiency. A critical layer in semi-transparent PSCs is the inorganic buffer layer, which protects the PSC against damage when the transparent electrode is sputtered on top. The development of n-i-p structured semi-transparent PSCs has been hampered by the lack of suitable p-type buffer layers. In this work we develop a p-type CuOx buffer layer, which can be grown uniformly over the perovskite device without damaging the perovskite or organic charge transport layers, can be grown using industrially scalable techniques and has high hole mobility (4.3 +/- 2 cm2 V-1 s-1), high transmittance (>95%), and a suitable ionisation potential for hole extraction (5.3 +/- 0.2 eV). Semi-transparent PSCs with efficiencies up to 16.7% are achieved using the CuOx buffer layer. Our work demonstrates a new approach to integrate PSCs into tandem configurations, as well as enable the development of other devices that need high quality p-type layers.

physics.app-ph↗

arXiv2019

A Note on Optimal Sampling Strategy for Structural Variant Detection Using Optical Mapping

Structural variants compose the majority of human genetic variation, but are difficult to assess using current genomic sequencing technologies. Optical mapping technologies, which measure the size of chromosomal fragments between labeled markers, offer an alternative approach. As these technologies mature towards becoming clinical tools, there is a need to develop an approach for determining the optimal strategy for sampling biological material in order to detect a variant at some threshold. Here we develop an optimization approach using a simple, yet realistic, model of the genomic mapping process using a hyper-geometric distribution and {probabilistic} concentration inequalities. Our approach is both computationally and analytically tractable and includes a novel approach to getting tail bounds of hyper-geometric distribution. We show that if a genomic mapping technology can sample most of the chromosomal fragments within a sample, comparatively little biological material is needed to detect a variant at high confidence.

q-bio.QM↗

arXiv2018

Origin of Improved Photoelectrochemical Water Splitting in Mixed Perovskite Oxides

Owing to the versatility in their chemical and physical properties, transition metal perovskite oxides have emerged as a new category of highly efficient photocatalysts for photoelectrochemical water splitting. Here, to understand the underlying mechanism for the enhanced photoelectrochemical water splitting in mixed perovskites, we explore ideal epitaxial thin films of the BiFeO3-SrTiO3 system. The electronic struture and carrier dynamics are determined from both experiment and density-functional theory calculations. The intrinsic phenomena are measured in this ideal sytem, contrasting to commonly studied polycrstalline solid solutions where extrinsic structural features obscure the intrinsic phenomena. We determined that when SrTiO3 is added to BiFeO3 the conduction band minimum position is raised and an exponential tail of trap states from hybridized Ti 3d and Fe 3d orbitals emerges near the conduction band edge. The presence of these trap states strongly suppresses the fast electron-hole recombination and improves the photocurrent density in the visible-light region, up to 16 times at 0 VRHE compared to the pure end member compositions. Our work provides a new design approach for optimising the photoelectrochemical performance in mixed perovksite oxides.

cond-mat.mtrl-sci↗

arXiv2018

Numerical Method for Free Electron Laser using an Overmoded Rectangular Waveguide

Numerical simulation codes are basic tools for designing Free Electron Lasers (FELs). This paper describes a numerical method for the time-dependent, three-dimensional simulation of the free electron laser (FEL) using a rectangular waveguide within overmoded configuration when the radiation wavelength is much shorter than the waveguide cut-off wavelength. Instead of developing a new code, the GENESIS simulation code is modified for our purpose. This method presented here can be used for extending the capacity of GENESIS to cover this special configuration. The major modification is to apply the metal boundary conditions on the field equations in a limited rectangular region and the full Cartesian mesh using the Alternating Direction Implicit (ADI) integration scheme to solve the field equation remains adopted.

physics.acc-ph↗

arXiv2017

An empirical study of touch-based authentication methods on smartwatches

The emergence of smartwatches poses new challenges to information security. Although there are mature touch-based authentication methods for smartphones, the effectiveness of using these methods on smartwatches is still unclear. We conducted a user study (n=16) to evaluate how authentication methods (PIN and Pattern), UIs (Square and Circular), and display sizes (38mm and 42mm) affect authentication accuracy, speed, and security. Circular UIs are tailored to smartwatches with fewer UI elements. Results show that 1) PIN is more accurate and secure than Pattern; 2) Pattern is much faster than PIN; 3) Square UIs are more secure but less accurate than Circular UIs; 4) display size does not affect accuracy or speed, but security; 5) Square PIN is the most secure method of all. The study also reveals a security concern that participants' favorite method is not the best in any of the measures. We finally discuss implications for future touch-based smartwatch authentication design.

cs.HC↗

arXiv2017

Insulating-to-Conducting Behavior and Band Profile Across the La0.9Ba0.1MnO3/Nb:SrTiO3 Epitaxial Interface

La0.9Ba0.1MnO3 is a ferromagnetic insulator in its bulk form, but exhibits metallicity in thin film form. It has a wide potential in a range of spintronic-related applications, and hence it is critical to understand thickness-dependent electronic structure in thin films as well as substrate/film interface effects. Here, using electrical and in-situ photoemission spectroscopy measurements, we report the electronic structure and interface band profile of high-quality layer-by-layer-grown La0.9Ba0.1MnO3 on single crystal Nb:SrTiO3 substrates. A transition from insulating-to-conducting was observed with increasing La0.9Ba0.1MnO3 thickness, which was explained by the determined interface band diagram of La0.9Ba0.1MnO3/Nb: SrTiO3, where a type II heterojunction was formed.

cond-mat.str-el↗

arXiv2017

Manipulating Multiple Order Parameters via Oxygen Vacancies: The case of Eu0.5Ba0.5TiO3-δ

Controlling functionalities, such as magnetism or ferroelectricity, by means of oxygen vacancies (VO) is a key issue for the future development of transition metal oxides. Progress in this field is currently addressed through VO variations and their impact on mainly one order parameter. Here we reveal a new mechanism for tuning both magnetism and ferroelectricity simultaneously by using VO. Combined experimental and density-functional theory studies of Eu0.5Ba0.5TiO3-δ, we demonstrate that oxygen vacancies create Ti3+ 3d1 defect states, mediating the ferromagnetic coupling between the localized Eu 4f7 spins, and increase an off-center displacement of Ti ions, enhancing the ferroelectric Curie temperature. The dual function of Ti sites also promises a magnetoelectric coupling in the Eu0.5Ba0.5TiO3-δ.

cond-mat.mtrl-sci↗

arXiv2013

Generation and measurement of sub-picosecond electron bunch in photocathode rf gun

We consider a scheme to generate sub-picosecond electron bunch in the photocathode rf gun by improving the acceleration gradient in the gun, suitably tuning the bunch charge, the laser spot size and the acceleration phase, and reducing the growth of transverse emittance by laser shaping. A nondestructive technique is also reported to measure the electron bunch length, by measuring the high-frequency spectrum of wakefield radiation which is caused by the passage of a relativistic electron bunch through a channel surrounded by a dielectric.

physics.acc-ph↗

arXiv2013

Oxygen-Vacancy-Induced Antiferromagnetism to Ferromagnetism Transformation in Multiferroic Thin Films

Oxygen vacancies (VOs) effects on magnetic ordering in Eu0.5Ba0.5TiO3-δ (EBTO3-δ) thin films have been investigated using a combination of experimental measurements and first-principles density-functional calculations. Two kinds of EBTO3-δthin films with different oxygen deficiency have been fabricated. A nuclear resonance backscattering spectrometry technique has been used to quantitatively measure contents of the VOs. Eu0.5Ba0.5TiO3 ceramics have been known to exhibit ferroelectric (FE) and G-type antiferromagnetic (AFM) properties. While, a ferromagnetic (FM) behavior with a Curie temperature of 1.85 K has been found in the EBTO3-δ thin films. Spin-polarized Ti3+ ions, which originated from the VOs, has been proven to mediate a FM coupling between the local Eu 4f spins and were believed to be responsible for the great change of the magnetic ordering. Our work opens up a new avenue for developing FM-FE materials by manipulating the oxygen deficiency in AFM-FE multiferroics.

cond-mat.mtrl-sci↗