arXiv subjects

Wenbo Wang

Publications and source records attributed to Wenbo Wang.

At least 19 recordsLinked to original sources

arXiv2026

Auriga Technical Report: A Task-Agnostic Agent Harness for Zero-Shot Embodied Manipulation

Vision-language models can interpret instructions and plan manipulation tasks, yet struggle when acting directly as robot policies. On RoboDojo, a large planning-execution gap separates high-level task decisions from physical execution: removing arm execution raises GPT-6 Astra's success rate from 22.5% under the reference control interface to 76.2%. We present Auriga, a task-agnostic agent harness that closes 68.3% of this gap in zero-shot manipulation without target-task trials or resets. In Auriga, the model makes all task decisions over an explicit task belief and acts through either direct tool calls or synthesized multi-step Python programs, while the harness supplies calibrated 3D measurements, finger-referenced dual-arm control, and a single admission gateway to the robot. Before motion, the model inspects a visual trajectory preview while simulation is paused; during execution, the harness checks declared stage tolerances and grasp bounds, stopping the robot on divergence and returning the measured discrepancy for in-place recovery. Developed across 13 cross-task capability iterations and frozen for evaluation, Auriga ranks first on the RoboDojo leaderboard with a 57.7% success rate (64.0 Score), more than doubling the reference harness on the same model, and remains first under scene randomization while learned policies drop by up to 33.9%. On RoboCasa365, the same frozen harness reaches a 73.2% success rate, outperforming VLA-assisted agents by up to 23.1% on composite tasks. Project page: https://auriga.stelledge.com/ Code: https://github.com/lose4578/Auriga

cs.RO↗

arXiv2026

Interface-Induced Trajectory Censoring

Tool-use evaluations typically measure calls through a serving stack, which can report zero calls even when model outputs contain call-shaped payloads. We study interface-induced trajectory censoring: a mismatch between model emissions and the interface that converts them into actions. On selected BFCL v4 subsets, changing only the serving adapter while holding model weights and other evaluation settings fixed moves scores under the official scorer from 0.00 to 0.96 on simple_python and from 0.00 to 0.19 on multi_turn_base. A template-parser factorial experiment shows strong complementarity: neither component replacement alone restores parsing from the baseline, whereas their joint replacement recovers 196/200 first-request parses. Across five Qwen2.5-Coder checkpoints, classifier-positive emissions increase with model size while the mismatched interface reports no calls; a separate matched-interface Qwen3 ladder exhibits few silent emissions through 8B. Experiments on 115 tau-bench retail tasks extend the mechanism to a stateful, non-code environment. In a preregistered, single-seed, 150-step 7B LoRA experiment, changing only the parser registered in verl increases tool executions from 10 to 16,844. However, neither a shared programmatic-feedback evaluation nor a post-hoc common native function-calling evaluation detects a held-out success gain from repair; rescue counts do not increase. Interface repair thus restores tool-mediated experience without a detected performance gain in this setting. These findings show that tool-use measurements depend on the model-interface configuration and motivate layer-wise observability and conformance checks before attributing evaluation or training outcomes to the model alone.

cs.AI↗

arXiv2026

Topology-Aware Cooperative Beam-Hopping Scheduling for Efficient Resource Allocation in LEO Satellite Systems

The dynamic topology and heterogeneous traffic demands of multi-satellite systems present substantial challenges for beam-hopping (BH) resource management. This letter develops a topology-aware cooperative BH framework for multi-satellite systems under partial observability. A lightweight load-balancing scheme first determines the serving relationships, which are then exploited to construct an association-induced satellite-user graph. A two-phase graph neural network (GNN) extracts episode-level topology-aware structural identities for parameter-sharing agents, while a recurrent multi-agent proximal policy optimization (MAPPO) policy handles slot-level dynamics for joint beam scheduling and onboard power control. Simulation results demonstrate notable gains in energy efficiency, throughput, and fairness over the baselines.

cs.NI↗

arXiv2026

VibeEdit: Image Editing with Canvas Instructions

In text-guided image editing, describing the desired change is often straightforward, but identifying the intended object or region can be cumbersome, especially when several objects look alike. We introduce a new image editing interface that lets users place spatial marks and optional short notes directly on the image. Together, these annotations form a canvas instruction that specifies where to edit and what to change. Our editor, VibeEdit, follows these instructions to perform object addition, removal, replacement, attribute modification, and movement without a separate text prompt. We construct 1.55 million source-target edit pairs with object masks and structured edit descriptions, from which we render canvas instructions during training. We adapt Qwen-Image-Edit with layer-decoupled conditioning that separately encodes source images and canvas instructions for image editing. We train the model with region-weighted supervised fine-tuning, followed by rubric-guided reinforcement learning to improve edit completion, local edit quality, and preservation of unedited regions. We evaluate VibeEdit on an independently constructed, human-curated benchmark of 419 cases emphasizing target selection among similar objects. VibeEdit achieves a VLM rubric score of 79.9 and an outside-region PSNR of 32.8 dB, compared with 67.4 and 24.0 dB for FireRed, the highest-scoring text-instructed baseline in our evaluation.

cs.CV↗

arXiv2026

ShelfChange3D: Object-Level 3D Change Detection for Retail Shelf Monitoring

Reliable shelf monitoring is an important capability for retail automation, yet existing out-of-stock detection methods mainly operate in image space and lack metric 3D localization for downstream robotic systems. We formulate shelf monitoring as object-level 3D change detection: given two RGB-D observations captured at different times, the goal is to identify changed products and localize each change with a 3D bounding box. To support this task, we introduce ShelfChange3D, comprising 145K synthetic and 5K real-world paired RGB-D observations with object-level 3D change annotations. We further propose ChangeBox, an end-to-end framework that jointly reasons over paired observations and predicts object-level 3D change boxes. To improve localization accuracy, we introduce a geometry-based refinement stage that exploits depth and gravity prior to estimate relative pose and refine predicted boxes. Experiments show that ChangeBox outperforms existing change detection baselines, with further gains from refinement and effective transfer from synthetic to real-world observations.

cs.CV↗

arXiv2026

Benefits of Dynamic Thermal Rating for Distribution Transformers Under Accelerated Load Growth

Dynamic Thermal Rating (DTR) has been widely applied to transmission lines for congestion management, but its potential for distribution transformers is less explored. By adjusting equipment ratings based on real ambient and operating conditions, DTR allows transformers to operate above conservative static nameplate values without compromising asset health. This paper evaluates how DTR can serve as a non-wires alternative to traditional upgrades in distribution systems facing accelerated load growth. Using an example feeder from the SMART-DS dataset, we compare conventional transformer replacement strategies against DTR-enabled operation with ambient-adjusted ratings. The results demonstrate that DTR can defer a significant number of transformer upgrades and reduce annual upgrade costs. More broadly, DTR is most effective in regions with pronounced weather diversity, peak demand occurring during cooler periods, or sustained load growth that would otherwise trigger costly reinforcements. These findings show that DTR is a practical and cost-effective option for utilities, provides both operational flexibility and investment deferral opportunities, and offers a foundation for developing distribution-level DTR programs.

eess.SY↗

arXiv2026

Cloud Workflow Scheduling Based on Graph Attention-Driven Hierarchical Reinforcement Learning

Dynamic cloud workflow scheduling must balance deadline satisfaction, container utilization, and energy consumption while dealing with stochastic task-execution speeds, placement-dependent communication, and coupled task and container decisions. Workflows are naturally modeled as directed acyclic graphs (DAGs), but conventional vector- or matrix-based states do not fully capture their dependency topology. To better represent task urgency and structural relationships, we assign predicted sub-deadlines to tasks and use a multi-head graph attention network (GAT) to extract dependency information from the evolving DAGs. Based on these representations, we develop a Graph Attention-Driven Hierarchical Reinforcement Learning (GA-HRL) framework and model the scheduling process as an event-driven hierarchical semi-Markov decision process (SMDP). Workflow arrivals and task completions trigger scheduling events. At each scheduling event, the Task Scheduling (TS) agent first processes the currently ready tasks by assigning them to admissible existing containers or requesting new ones. The requested containers are then processed by the Container Scheduling (CS) agent for host placement before the environment advances. The two agents are trained alternately using separate Proximal Policy Optimization (PPO). Experiments on the 2018 Alibaba cluster trace show that GA-HRL maintains competitive workflow success rate and, in settings where success is comparable, generally achieves higher container utilization and lower energy consumption. Under the largest speed variation, it trades a small success-rate margin for substantially lower energy. Simulation code is available at: https://github.com/zongjin130/GA-HRL.

cs.LG↗

arXiv2026

LightAIR: Lightweight Action Inversion and Riemannian Rectification for Text-based Person Anomaly Search

Traditional Text-based Person Search (TPS) is typically limited to matching static appearance attributes, severely neglecting dynamic action information. The Text-based Person Anomaly Search (TPAS) task bridges this gap, requiring models to locate micro-level specific abnormal behaviors while matching macro-level appearance of pedestrians. However, current TPAS methods face fundamental limitations: external explicit pose estimators are fragile in unconstrained surveillance scenarios, and implicit learning encounters visual decoupling failure under pixel-level entanglement, causing dominant appearance information to easily swallow and contaminate subtle action features. Furthermore, performing contrastive optimization on hard negative samples (``same appearance, different actions'') in conventional Euclidean spaces induces severe shortcut learning. To address these, we propose the Lightweight Action Inversion and Riemannian rectification network (LightAIR). First, it introduces textual semantic priors as anchors via a lightweight action inversion operator to extract pure action features, thereby overcoming visual-inherent coupling. Subsequently, it employs orthogonal null-space projection to constrain appearance features within the orthogonal complement space of action features, guaranteeing strict forward decoupling. Finally, we designed a gradient rectification module that computes the Riemannian gradient to constrain the backpropagation trajectory, forcing the gradient flow to update strictly along the tangent space that preserves decoupling properties, thereby cutting off harmful shortcuts. Extensive experiments on the widely used TPAS and TIPR datasets demonstrate that LightAIR significantly outperforms existing state-of-the-art methods. Codes are available at https://github.com/rainy-london/LightAIR

cs.CV↗

arXiv2026

The First EgoCross Challenge at EgoVis 2026: Cross-Domain Egocentric Video Question Answering

EgoCross is a cross-domain egocentric video question answering benchmark designed to evaluate whether multimodal large language models can generalize beyond common daily-life scenarios. The first EgoCross Challenge was hosted at the Third EgoVis Workshop at CVPR 2026 and evaluated models on first-person videos from four target domains: surgery, industrial assembly, extreme sports, and animal perspectives. Each test example consists of an egocentric video clip, a question, and four candidate answers, from which the model must select the correct option. This technical report introduces the challenge task, benchmark resources, and two official Codabench tracks. The Source-Limited Track restricts participants to the official baseline model and a small support set, whereas the Open-Source Track permits broader choices of models and training data under rules that prohibit the manual construction of target-domain training data. In total, the challenge received more than 1,500 submissions from over 130 participants, with 19 teams participating in the Open-Source Track and 38 teams in the Source-Limited Track. We further present the official leaderboard results and summarize the winning solutions from both tracks. We hope that this report will serve as a useful technical reference for advancing cross-domain egocentric video understanding. All resources, including the challenge data, baseline implementation, and code released by the winning teams, are made publicly available.

cs.CV↗

arXiv2026

ContractHIL-HLS: Contract-Aligned Multi-Agent Workflow with Hardware-in-the-Loop Feedback for HLS Design

This paper presents ContractHIL-HLS, a contract-aligned multi-agent workflow for practical high-level synthesis (HLS) engineering. The workflow makes three contributions. First, it introduces a structured contract as the semantic-alignment and task-execution artifact that translates natural language requirements into explicit interfaces, constraints, validation checks, and rollback rules. Second, it incorporates hardware information into the feedback loop by feeding HLS, Vivado, PYNQ runtime, power, and failure evidence back into generation, thereby extending LLM-assisted HLS from kernel code toward system- and board-level closure. Third, it decomposes agents by semantic lowering and execution tasks rather than by conversational roles: a Contract Agent lowers natural language into the contract, an HTML Agent renders the contract as persistent structured HTML, and a Hardware-in-the-Loop Agent implements and revises the design with measured evidence. We evaluate ContractHIL-HLS in two parts. On 94 locally executable HLS-Eval tasks, the structured contract provides the largest small design gain, improving the estimated single-sample testbench pass rate from 64.0% to 70.2%; the full flow reaches 70.4% pass@1 and 76.6% pass@5. Because HLS-Eval does not exercise board-level design, we also validate ContractHIL-HLS on a board tested ML-KEM/ML-DSA post-quantum cryptography (PQC) secure-message accelerator, where the retained dual-bitstream organization reduces six-message average text runtime from 207.3 ms to 52.4 ms with positive routed WNS on both images while preserving decrypted-message verification. We open-source our work at BJUT-CS316-LAB/ContractHIL-HLS (https://github.com/BJUT-CS316-LAB/ContractHIL-HLS).

cs.AI↗

arXiv2026

Beam Hopping Low Earth Orbit Satellite Resource Allocation for Differentiated Services and Robustness Analysis under Model Attacks

Beam hopping (BH)-enabled Low Earth Orbit (LEO) satellites play a pivotal role in next-generation communication networks by providing global coverage, improving spectrum efficiency, and supporting flexible adaptation to heterogeneous service demands. To fully exploit these capabilities, artificial intelligence (AI) techniques are increasingly employed for dynamic resource allocation and power management. However, limited onboard resources and potential adversarial perturbations pose challenges to both efficiency and robustness. To address these issues, we leverage digital twin technology to accurately capture the spatio-temporal dynamics of user-satellite visibility, thereby providing precise state information for decision-making. Building on this, we formulate a joint optimization framework for BH scheduling and power allocation as a Markov Decision Process and propose BRIDGE, i.e., BH with Reinforcement learning incorporating Integrated Dirichlet and Gumbel-TopK Exploration, which integrates a quality of service (QoS)-driven subchannel scheduling mechanism to ensure efficient and differentiated resource allocation. The robustness of the model is systematically evaluated under three classical adversarial attacks. Simulation results demonstrate that the proposed approach achieves superior energy efficiency, service throughput, and fairness, while the robustness analysis shows stable performance under the considered bounded adversarial perturbations.

cs.NI↗

arXiv2026

MobileManiBench: Simplifying Model Verification for Mobile Manipulation

Vision-language-action models have advanced robotic manipulation but remain constrained by reliance on the large, teleoperation-collected datasets dominated by the static, tabletop scenes. We propose a simulation-first framework to verify VLA architectures before real-world deployment and introduce MobileManiBench, a large-scale benchmark for mobile-based robotic manipulation. Built on NVIDIA Isaac Sim and powered by reinforcement learning, our pipeline autonomously generates diverse manipulation trajectories with rich annotations (language instructions, multi-view RGB-depth-segmentation images, synchronized object/robot states and actions). MobileManiBench features 2 mobile platforms (parallel-gripper and dexterous-hand robots), 2 synchronized cameras (head and right wrist), 630 objects in 20 categories, 5 skills (open, close, pull, push, pick) with over 100 tasks performed in 100 realistic scenes, yielding 300K trajectories. This design enables controlled, scalable studies of robot embodiments, sensing modalities, and policy architectures, accelerating research on data efficiency and generalization. We benchmark representative VLA models and report insights into perception, reasoning, and control in complex simulated environments, with all code, datasets, and models publicly released.

cs.RO↗

arXiv2026

SpaceRipple: Lightweight Semantic Delivery for Mission-Oriented LEO Earth Observation Satellite Networks

Earth observation satellite networks generate massive volumes of high-resolution imagery, whereas inter-satellite and downlink resources remain limited. In many time-sensitive missions, ground users require mission-relevant semantic information rather than a full raw-image downlink. This paper proposes SpaceRipple, a lightweight framework for mission-oriented semantic delivery and on-board processing in Earth observation satellite networks. A sensing satellite performs adaptive compression and metadata generation to reduce inter-satellite traffic, while an edge computing satellite restores the received representation and extracts task-relevant semantic information. Unlike fidelity-driven image transmission, SpaceRipple coordinates compression, forwarding, restoration, and semantic inference within a collaborative pipeline, enabling semantic-oriented delivery instead of pixel-level image delivery. A compression-aware MoE enhancement module is further introduced to improve robustness under degraded visual inputs. Experimental results show that SpaceRipple achieves favorable reconstruction quality, improved semantic detection performance, and substantial bandwidth savings, demonstrating its potential for efficient and reliable Earth observation under constrained satellite-network resources.

cs.CV↗

arXiv2026

Towards Ubiquitous 6G Computing and Networking Convergence: Architecture and Mechanism for Cross-Domain Resource Coordination

The 6G network will support six major application scenarios, such as immersive communication, integrated AI and communication, and integrated sensing and communication. Many scenarios necessitate significant computational support. Moreover, user demands are becoming increasingly segmented, diverse, and personalized. Traditional network slicing alone is insufficient to meet the heterogeneous computing and networking demands of emerging service scenarios. Mobile computing network convergence (CNC) introduces a fundamentally different paradigm from the conventional cloud computing plus communication network model by deeply embedding computing resources into the mobile network infrastructure and enabling integrated computing-network services tailored to diverse user demands. In this article, we investigate orchestration architectures and mechanisms for CNC in 6G mobile networks. We begin by reviewing the evolution of CNC from a mobile network perspective and surveying existing studies, which we categorize according to mobile network architectures. Building on these insights, we propose a hierarchical, cross-domain coordination architecture and an orchestration mechanism based on hierarchical multi-agent reinforcement learning. Performance evaluations demonstrate that the proposed architecture and mechanism significantly reduce system energy consumption while enhancing task satisfaction rate. Finally, we discuss open challenges and future research directions.

cs.NI↗

arXiv2026

OmniEgo-R$^2$: A Routed Reasoning Framework for the 1st Cross-Domain EgoCross Challenge at CVPR 2026

The 1st Cross-Domain EgoCross Challenge at EgoVis, CVPR 2026 evaluates whether multimodal large language models can reason over egocentric videos across surgery, industry, extreme sports, and animal perspective. We achieved second place in both the Source-Limited and Open-Source tracks. In this report, we formulate EgoCross as a robust cross-domain embodied video reasoning problem rather than a simple multiple-choice visual question answering task. We identify three key challenges: (C1) temporal boundary ambiguity, where critical state transitions are sparsely sampled and often occur between frames; (C2) cross-domain semantic granularity mismatch, where the same capability requires different domain-specific visual grammar; and (C3) decision instability under close options, where long multimodal reasoning can select unsupported distractors or produce malformed outputs. To address them, we propose OmniEgo-R$^2$ (Omnidomain Egocentric Routed Reasoning), a unified routed reasoning pipeline consisting of temporal-evidence normalization, domain-agnostic capability routing, structured perception--dynamics--decision reasoning, boundary-aware option verification, and defensive answer calibration. OmniEgo-R$^2$ uses the Qwen3-VL-4B-SFT checkpoints on each EgoCross domain as the visual-language backbone, and wraps them with lightweight test-time reasoning and parsing programs. Our final submissions obtain 66.35% overall accuracy in the Source-Limited track and 66.77% in the Open-Source track, ranking second in both leaderboards. The codes are available on https://github.com/Lee-zixu/OmniEgo-R2

cs.CV↗

arXiv2026

A Physics-Informed Hierarchical Neural Network for Microwave Scattering Analysis of 3D PEC Targets

Accurate modeling of scattering from three-dimensional (3D) perfectly electrically conducting (PEC) targets at microwave frequencies constitutes a fundamental objective in computational electromagnetics, particularly for radar cross section (RCS) prediction and microwave scattering analysis. Classical solvers, such as the method of moments and the Multilevel Fast Multipole Algorithm (MLFMA), although provide high physical fidelity, they become costly under scenarios of repeated queries involving many incidence configurations or frequencies, whereas purely data-driven surrogates often lack accuracy on geometrically complex targets. This paper proposes a U-shaped physics-informed artificial neural network (U-PINet) for 3D microwave scattering analysis. Inspired by the near-far field decomposition of MLFMA, U-PINet combines a near-field graph encoder, parameterized by learnable univariate basis functions, with a hierarchical multi-scale fusion module organized on an octree partition. The proposed network is trained against a discretized residual of the electric-field integral equation at surface collocation points, without requiring reference current labels. Experiments on canonical and geometrically complex 3D PEC targets, conducted under multiple frequency and polarization configurations and assessed through bistatic RCS reconstruction, showcase that U-PINet outperforms representative physics-informed baselines, and yields substantial runtime savings over the classical MLFMA solver under repeated-query scenarios.

cs.LG↗

arXiv2026

WiFlow: A Lightweight WiFi-based Continuous Human Pose Estimation Network with Spatio-Temporal Feature Decoupling

Human pose estimation is fundamental to intelligent perception in the Internet of Things (IoT), enabling applications ranging from smart healthcare to human-computer interaction. While WiFi-based methods have gained traction, they often struggle with continuous motion and high computational overhead. This work presents WiFlow, a novel framework for continuous human pose estimation using WiFi signals. Unlike vision-based approaches such as two-dimensional deep residual networks that treat Channel State Information (CSI) as images, WiFlow employs an encoder-decoder architecture. The encoder captures spatio-temporal features of CSI using temporal and asymmetric convolutions, preserving the original sequential structure of signals. It then refines keypoint features of human bodies to be tracked and capture their structural dependencies via axial attention. The decoder subsequently maps the encoded high-dimensional features into keypoint coordinates. Trained on a self-collected dataset of 360,000 synchronized CSI-pose samples from 5 subjects performing continuous sequences of 8 daily activities, WiFlow achieves a Percentage of Correct Keypoints (PCK) of 97.25% at a threshold of 20% (PCK@20) and 99.48% at PCK@50, with a mean per-joint position error of 0.007 m. With only 2.23M parameters, WiFlow significantly reduces model complexity and computational cost, establishing a new performance baseline for practical WiFi-based human pose estimation. Our code and datasets are available at https://github.com/DY2434/WiFlow-WiFi-Pose-Estimation-with-Spatio-Temporal-Decoupling.git.

cs.CV↗

arXiv2026

Qianfan-OCR: A Unified End-to-End Model for Document Intelligence

We present Qianfan-OCR, a 4B-parameter end-to-end vision-language model that unifies document parsing, layout analysis, and document understanding within a single architecture. It performs direct image-to-Markdown conversion and supports diverse prompt-driven tasks including table extraction, chart understanding, document QA, and key information extraction. To address the loss of explicit layout analysis in end-to-end OCR, we propose Layout-as-Thought, an optional thinking phase triggered by special think tokens that generates structured layout representations -- bounding boxes, element types, and reading order -- before producing final outputs, recovering layout grounding capabilities while improving accuracy on complex layouts. Qianfan-OCR ranks first among end-to-end models on OmniDocBench v1.5 (93.12) and OlmOCR Bench (79.8), achieves competitive results on OCRBench, CCOCR, DocVQA, and ChartQA against general VLMs of comparable scale, and attains the highest average score on public key information extraction benchmarks, surpassing Gemini-3.1-Pro, Seed-2.0, and Qwen3-VL-235B. The model is publicly accessible via the Baidu AI Cloud Qianfan platform.

cs.CV↗