SearcharxivSearch

arXiv subjects

Wenming Zhang

Publications and source records attributed to Wenming Zhang.

13 recordsLinked to original sources

Prompt Generation Technical Report

Generative retrieval has become an increasingly adopted paradigm for industrial search, recommendation, and advertising systems, delivering significant online gains. Most existing work combines user behavior sequences with large language models (LLMs) to model user preferences. In practice, feature engineering remains critical to model effectiveness, yet its complexity slows offline iteration and makes online deployment heavy and hard to reuse, all under tight online latency budgets. The root cause is a tight coupling between feature-processing logic and model architecture, where every feature change touches the training and serving code and resists reuse across scenarios. To break this coupling, we present Prompt Generation (PG), a high-level tokenizer and configuration-driven framework that decouples feature-processing logic from model architecture through two declarative JSON files, which serve as the single source of truth for both offline training and online serving, ensuring feature consistency across the two stages. Organizing features under four types with three composable processing components to assemble and compress heterogeneous features, PG delivers acceleration at three levels: (1)fast training iteration: feature experiments require only configuration changes, with built-in token compression for ultra-long sequences; (2)fast deployment: a new scenario only needs to conform to the PG schema and plug into a universal pipeline, with no scenario-specific engineering; (3)fast online inference: engine applies unified optimizations over the standardized configuration, reducing PG's overhead to a negligible level. PG has been deployed on Taobao Search with statistically significant online A/B uplifts of +0.47% in transaction count and +0.51% in GMV, and has been applied across multiple Taobao search and recommendation teams as the iteration framework for generative retrieval.

cs.IR

KARMA: Knowledge-Action Regularized Multimodal Alignment for Personalized Search at Taobao

Large Language Models (LLMs) are equipped with profound semantic knowledge, making them a natural choice for injecting semantic generalization into personalized search systems. However, in practice we find that directly fine-tuning LLMs on industrial personalized tasks (e.g. next item prediction) often yields suboptimal results. We attribute this bottleneck to a critical Knowledge--Action Gap: the inherent conflict between preserving pre-trained semantic knowledge and aligning with specific personalized actions by discriminative objectives. Empirically, action-only training objectives induce Semantic Collapse, such as attention "sinks". This degradation severely cripples the LLM's generalization, failing to bring improvements to personalized search systems. We propose KARMA (Knowledge--Action Regularized Multimodal Alignment), a unified framework that treats semantic reconstruction as a train-only regularizer. KARMA optimizes a next-interest embedding for retrieval (Action) while enforcing semantic decodability (Knowledge) through two complementary objectives: (i) history-conditioned semantic generation, which anchors optimization to the LLM's native next-token distribution, and (ii) embedding-conditioned semantic reconstruction, which constrains the interest embedding to remain semantically recoverable. On Taobao search system, KARMA mitigates semantic collapse (attention-sink analysis) and improves both action metrics and semantic fidelity. In ablations, semantic decodability yields up to +22.5 HR@200. With KARMA, we achieve +0.25 CTR AUC in ranking, +1.86 HR in pre-ranking and +2.51 HR in recalling. Deployed online with low inference overhead at ranking & pre-ranking stage, KARMA drives +0.9% increase in GMV.

cs.IR

HHFT: Hierarchical Heterogeneous Feature Transformer for Recommendation Systems

We propose HHFT (Hierarchical Heterogeneous Feature Transformer), a Transformer-based architecture tailored for industrial CTR prediction. HHFT addresses the limitations of DNN through three key designs: (1) Semantic Feature Partitioning: Grouping heterogeneous features (e.g. user profile, item information, behaviour sequennce) into semantically coherent blocks to preserve domain-specific information; (2) Heterogeneous Transformer Encoder: Adopting block-specific QKV projections and FFNs to avoid semantic confusion between distinct feature types; (3) Hiformer Layer: Capturing high-order interactions across features. Our findings reveal that Transformers significantly outperform DNN baselines, achieving a +0.4% improvement in CTR AUC at scale. We have successfully deployed the model on Taobao's production platform, observing a significant uplift in key business metrics, including a +0.6% increase in Gross Merchandise Value (GMV).

cs.IR

Numerical investigation on solids settling in a non-Newtonian slurry inside a horizontal flume

Slurry transportation is always crucial for many industrial processes. This study numerically investigates the settling behavior of multisize solid particles in a non-newtonian slurry inside a semicircular open channel (flume). The non-newtonian slurry is modelled using a three-dimensional (3D) unsteady Eulerian-Eulerian (E-E) model coupled with the Hershel-Bulkley (HB) rheological model. A detailed sensitivity analysis of drag models is performed to establish the solid-fluid interaction in the slurry flow. The numerical model is validated with the experimental data from the literature and shows a fair agreement. The validated model is used to simulate the settling behavior of the slurry in the flume. The mean particle diameter of the solid particles in the slurry is in the range of 75-296 $μ$m with a median diameter of 188 $μ$m. The effect of particle size distributions (PSDs), flume inclination, bubble size and bubble volume fraction on the particle settling inside the flume is investigated in the parametric study. The analysis of our results revealed that the settling of solids is significantly affected by PSDs in the open channel system. In particular, the increase in flume inclination progresses the settling and dissipation of fine and coarse particles, respectively. Additional simulations showed that the inception of bubbles influences the settling velocity of solids, which changes the settling behavior of multisize solids inside the flume. The presented study can be used as a valuable guideline for the optimisation of intermediate exclusion of water from thickened slurry in order to ensure the stability of tailing storage facility.

physics.flu-dyn

Characterization of a gaseous time projection chamber with an internal \ce{^{37}Ar} source

We report on a novel calibration method of gaseous detectors using an internal \ce{^{37}Ar} source. The \ce{^{37}Ar} is a fast-decaying and low-energy calibration source that provides a mono-energetic peak of 2.82 keV. A gaseous \ce{^{37}Ar} source is injected and uniformly distributed in a Micromegas-based gaseous time projection chamber (TPC). Key performance parameters of the detector, such as electron transmission, gain, energy resolution, gain uniformity, and drift field evolution, are effectively and quickly calibrated. The gain uniformity, related to the homogeneity of the avalanche gap of Micromegas, is calibrated quickly thanks to the event-by-event position reconstruction and quasi-point energy deposition of \ce{^{37}Ar}. The energy resolution is improved with the obtained gain uniformity map. The most noticeable improvement in energy resolution, from 44.9\% to 35.4\%, is observed at a working pressure of 7 bar. The internal calibration source is also used to characterize the dependence of the detector's electric field distortion on the drift field.

physics.ins-det

Evaluation of tungsten influx rate using line emissions from W$^{5+}$ ions in EAST Tokamak

The S/XB ratios (ionization per emitted photon) allow one to relate spectroscopic emissivity measurements to the impurity influx from a localized source. In this work, we determine the tungsten influx by examining two dominant EUV (Extreme Ultraviolet) line emissions at 382.13 Åand 394.07 Å, corresponding to the $4f 14 5f \rightarrow 4f 14 5d$ radiative transitions of the W$^{5+}$ ion. The ground configuration of W$^{5+}$ consists of the ground level and a metastable level, with the latter having a higher population than the ground state. Therefore, a simple approach assuming that the transitions are independent, i.e., only populated by a unique level source, requires correction. To address this, we have developed a fully collisional-radiative modeling in which 430 levels contribute to the ionization. We have utilized three advanced computational codes -- HULLAC (Hebrew University - Lawrence Livermore Atomic Code), AS (AutoStructure), and FAC (Flexible Atomic Code) -- for the atomic structure calculations. These codes provide the necessary information such as wavelengths, collisional and radiative transition rate coefficients. The FAC code was also used to calculate the direct electron-impact ionization under the distorted-wave approximation. We also included contributions to total ionization from excitation-autoionization processes up to $n = 15$ manifolds from the distorted-wave calculations. Subsequently, we used these results to ascertain the tungsten impurity influx in a dedicated discharge of the EAST tokamak, which operates with full tungsten divertors. In our findings, we observed that for the density range relevant to the edge region of a tokamak reactor, the S/XB ratios are almost independent of electron density but exhibit significant variation with electron temperature.

physics.plasm-ph

Line identification of extreme ultraviolet spectra from aluminum ions in EAST Tokamak plasmas

Extreme ultraviolet (EUV) spectra emitted from aluminum in the 5-340 A wavelength range were observed in Experimental Advanced Superconducting Tokamak (EAST) discharges. Several spectral lines from aluminum ions with different degrees of ionization were successfully observed with sufficient spectral intensities and resolutions using three fast-time-response EUV spectrometers. The line identification uses three independent state-of-art computational codes for the atomic structure calculations, which provide the wavelengths and radiative transition probabilities rate coefficients. These programs are HULLAC (Hebrew University - Lawrence Livermore Atomic Code), AUTOSTRUCTURE, and FAC (Flexible Atomic Code). Using three different codes allows us to resolve some ambiguities in identifying certain spectral lines and assess the validity of the theoretical predictions.

physics.plasm-ph

Status and Prospects of the PandaX-III Experiment

The PandaX-III experiment searches the neutrinoless double beta decay of $^{136}$Xe with a high-pressure xenon gaseous time projection chamber~(TPC). Thermal-bonding Micromegas modules are used for charge collection. Benefitting from the excellent energy resolution and imaging capability, the background rate can be significantly suppressed through the topological information of events. The technology is successfully demonstrated by a prototype detector. The final detector has been constructed. In this paper, we will report the status of the PandaX-III experiment, including the construction and commissioning of the final detector, and the Micromegas-based TPC performance test in the prototype detector.

physics.ins-det

Calibration of a Micromegas-based Gaseous Time Projection Chamber Using Cosmic Ray Muons

We report the calibration of a gaseous Time Projection Chamber based on Micromegas charge readout modules with cosmic ray muons, utilizing their penetrating power and relatively uniform energy deposition per unit length. Muon events were selected through track reconstruction to characterize detector performances, such as the drift velocity, electron lifetime, detector gain, and electric field distortion. The evolution of detector performances with gas purities and electric drift fields over a 50-day data-taking cycle was measured by the muon calibration method. For instance, the drift velocity degraded with gas impurities from ${3.40\pm 0.07 ~ cm/μs}$ to ${3.06\pm 0.06 ~ cm/μs}$, and then recovered with gas purification. A ${^{137}Cs}$ calibration source was also placed inside the detector as a reference for muon calibrations.

physics.ins-det

Mechanical transistors for logic-with-memory computing

As a potential revolutionary topic in future information processing, mechanical computing has gained tremendous attention for replacing or supplementing conventional electronics vulnerable to power outages, security attacks, and harsh environments. Despite its potential for constructing intelligent matter towards nonclassical computing systems beyond the von Neumann architecture, most works on mechanical computing demonstrated that the ad hoc design of simple logic gates cannot fully realize a universal mechanical processing framework involving interconnected arithmetic logic components and memory. However, such a logic-with-memory computing architecture is critical for complex and persistent state-dependent computations such as sequential logic. Here we propose a mechanical transistor (M-Transistor), abstracting omnipresent temperatures as the input-output mechanical bits, which consists of a metamaterial thermal channel as the gate terminal driving a nonlinear bistable soft actuator to selectively connect the output terminal to two other variable thermal sources. This M-Transistor is an elementary unit to modularly form various combinational and sequential circuits, such as complex logic gates, registers (volatile memory), and long-term memories (non-volatile memory) with much fewer units than the electronic counterparts. Moreover, they can establish a universal processing core comprising an arithmetic circuit and a register in a compact, reprogrammable network involving periodic read, write, memory, and logic operations of the mechanical bits. Our work contributes to realizing a non-electric universal mechanical computing architecture that combines multidisciplinary engineering with structural mechanics, materials science, thermal engineering, physical intelligence, and computational science.

physics.app-ph

A Gaseous Time Projection Chamber with Micromegas Readout for Low Radioactive Material Screening

Low radioactive material screening is becoming essential for rare event search experiments, such as neutrinoless double beta decay and dark matter searches in underground laboratories. A gaseous time projection chamber (TPC) can be used for such purposes with large active areas and high efficiency. A gaseous TPC with a Micromegas readout plane of approximately 20$\times$20 cm$^2$ is successfully constructed for surface alpha contamination measurements. We have characterized the energy resolution, gain stability, and tracking capability with calibration sources. With the unique track-related background suppression cuts of the gaseous TPC, we have established that the alpha background rate of the TPC is 0.13$\pm$0.03 $μ$Bq/cm$^2$, comparable to the leading commercial solutions.

physics.ins-det

Measurement of high-pressure xenon gas absorption in acrylic

Acrylic is a popular structural material in experiments requiring low background because of its radio-purity, machinability, and mechanical strength. However, its porosity may cause significant gas absorption and influence the detector stability in the long term. The interaction between acrylic and other detector materials becomes one of the key concerns in the detector design. In this paper, we carry out an experiment to measure quantitatively the absorption process of high-pressure xenon gas into acrylic. A specific setup is designed for the measurement, and systematic measurements are done to obtain a result of the absorption amount: 0.98 g xenon into 332 g of acrylic.

physics.ins-det

Dual Side Deep Context-aware Modulation for Social Recommendation

Social recommendation is effective in improving the recommendation performance by leveraging social relations from online social networking platforms. Social relations among users provide friends' information for modeling users' interest in candidate items and help items expose to potential consumers (i.e., item attraction). However, there are two issues haven't been well-studied: Firstly, for the user interests, existing methods typically aggregate friends' information contextualized on the candidate item only, and this shallow context-aware aggregation makes them suffer from the limited friends' information. Secondly, for the item attraction, if the item's past consumers are the friends of or have a similar consumption habit to the targeted user, the item may be more attractive to the targeted user, but most existing methods neglect the relation enhanced context-aware item attraction. To address the above issues, we proposed DICER (Dual Side Deep Context-aware Modulation for SocialRecommendation). Specifically, we first proposed a novel graph neural network to model the social relation and collaborative relation, and on top of high-order relations, a dual side deep context-aware modulation is introduced to capture the friends' information and item attraction. Empirical results on two real-world datasets show the effectiveness of the proposed model and further experiments are conducted to help understand how the dual context-aware modulation works.

cs.IR