arXiv subjects

Wim Wenseleers

Publications and source records attributed to Wim Wenseleers.

11 recordsLinked to original sources

arXiv2026

Comparative Evaluation of Encapsulation Methods for Endohedral Doping of Single-Wall Carbon Nanotubes

Single wall carbon nanotubes (SWCNTs) are promising building blocks for nanoelectronic and optoelectronic devices, yet reliable and stable doping, particularly n type, remains challenging due to strong environmental sensitivity and competing extrinsic effects. Encapsulation of charge transfer molecules within the SWCNT cavity offers a promising route to stable doping while preserving the nanotubes outer surface for subsequent processing. Here, we systematically investigate the filling of arc discharge SWCNTs with the electron donor tetrathiafulvalene and electron acceptor tetracyanoquinodimethane, comparing different methods for filling, including melt filling, solution reflux, and vacuum phase sublimation. We follow the entire processing workflow from raw, unfilled powders to aqueous dispersions and employ density gradient ultracentrifugation to separate filled from empty nanotubes as well as metallic from semiconducting ones. Encapsulation efficiency and electronic modification are assessed using absorption spectroscopy, resonant Raman scattering, thermogravimetric analysis, and electron paramagnetic resonance. Finally, we introduce a complementary vacuum-phase method that removes externally adsorbed molecules without extensive solvent washing, enabling cleaner encapsulated systems.

cond-mat.mes-hall↗

arXiv2026

Structures of iron and cobalt bimetallic clusters for optimized chemical vapor deposition growth of single-walled carbon nanotubes

We investigate iron-cobalt (Fe-Co) alloys as a representative high-performance catalyst system for SWCNT growth in a systematic manner by combining chemical vapor deposition (CVD) experiments with chirality-resolved spectroscopic analysis, as well as molecular dynamics (MD) simulations based on density functional theory-derived machine learning force fields while varying the Fe-Co ratio. Using zeolite-based SWCNTs prepared by alcohol CVD, absorption and photoluminescence spectroscopy, together with two-dimensional excitation-emission fitting was employed to quantify chirality-specific growth efficiency. Two distinct growth regimes were identified. At a relatively low temperature of 600 C, pure Co exhibits the highest catalytic activity, promoting efficient growth of small-diameter (0.7-0.9 nm) SWCNTs. In contrast, at 850 C, the Fe0.75Co0.25 alloy shows a pronounced enhancement in growth efficiency compared with pure Fe, pure Co, and other Fe-Co compositions, also yielding larger diameter tubes (0.9-1.1nm). Similar growth behavior was observed on SiO2 substrates, enabling detailed transmission electron microscopy analysis of catalyst nanoparticles. Electron microscopy and energy-dispersive X-ray spectroscopy reveal that high SWCNT yields correlate with the formation of small, uniform Fe-Co nanoparticles with Co-enriched surfaces, in excellent agreement with MD simulations. Lastly, MD results are summarized in a composition-diameter phase diagram that rationalizes the experimentally observed growth trends. The exceptional performance of the Fe0.75Co0.25 catalyst at high temperature is attributed to the stabilization of small and uniform catalyst clusters, providing mechanistic insight into the synergistic roles of alloy composition and temperature in SWCNT growth.

cond-mat.mtrl-sci↗

arXiv2025

Analysis of Fe and Co binary catalysts in chemical vapor deposition growth of single-walled carbon nanotubes

Metal catalysts play a pivotal role in the growth of single-walled carbon nanotubes (SWCNTs), with binary metallic catalysts emerging as an efficient SWCNT synthesis strategy. Among these, iron (Fe), cobalt (Co), and their alloys are particularly effective. However, prior studies have predominantly employed Fe--Co alloy catalysts with fixed atomic ratios as well as unchanged chemical vapor deposition (CVD) conditions, leaving the influence of variable Fe--Co compositions and CVD growth parameters on SWCNT synthesis poorly understood. This study focuses on the role of Fe--Co catalyst ratios, with the aim of elucidating the distinct contributions of Fe and Co atoms in the growth of SWCNTs. By systematically exploring a wide range of Fe--Co ratios and growth conditions, we identified Fe$_{0.75}$Co$_{0.25}$ as a highly efficient binary catalyst at 850~$^\circ$C, primarily forming catalyst clusters with diameters of 2.5--6~nm and yielding SWCNTs with diameters ranging from 0.9--1.1~nm. On the other hand, Fe$_{0}$Co$_{1}$ exhibited higher catalytic activity at 600~$^\circ$C, generating smaller catalyst clusters of 1.5--5~nm and producing SWCNTs with reduced diameters of about 0.6--0.9~nm. Transmission electron microscope (TEM) and energy dispersive X-ray spectroscopy (EDS) analyses reveal that high SWCNT yields correlate with the formation of uniformly sized Fe--Co catalyst particles with surface-segregated Co that optimizes carbon solubility. Molecular dynamics (MD) simulations further corroborate these findings, demonstrating that the structure and melting behavior of Fe$_x$Co$_{1-x}$ clusters depend on cluster size and composition.

cond-mat.mtrl-sci↗

arXiv2024

Low-Temperature Synthesis of Weakly Confined Carbyne inside Single-Walled Carbon Nanotubes

Carbyne, a one-dimensional (1D) carbon allotrope with alternating triple and single bonds, has the highest known mechanical strength but is unstable to bending, limiting synthesis to short linear chains. Encapsulation within carbon nanotubes (CNTs) stabilizes carbyne, forming confined carbyne (CC), thus enabling further research concerning attractive 1D physics and materials properties of carbyne. While CC has been synthesized in multi-walled CNTs (MWCNTs) using the arc-discharge method and in double-walled CNTs (DWCNTs) via high-temperature high-vacuum (HTHV) method, synthesis in single-walled CNTs (SWCNTs) has been challenging due to their fragility under such conditions. In this work, we report a low-temperature method to synthesize CC inside SWCNTs (CC@SWCNT). By annealing SWCNTs containing ammonium deoxycholate (ADC) at 400°C, ADC is converted into CC without damaging the SWCNTs. Raman spectroscopy revealed a strong CC phonon (CC-mode) peak at 1860-1870 cm^-1, much stronger than the SWCNT G-band peak, confirming a high fraction of CC in the resulting material. The Raman mapping result showed the uniformity of the CC-mode signal across the entire film sample, proving the high efficiency of this method in synthesizing CC in every SWCNT of appropriate size. Notably, the CC-mode peaks of CC@SWCNT (above 1860 cm^-1) are higher than those reported in previous CC@CNT samples (mostly less than 1856 cm^-1). This is attributed to larger SWCNT diameters (over 0.95 nm) used in this study, compared to the typical 0.6-0.8 nm range. Larger diameters result in reduced confinement, allowing carbyne to closely resemble free-standing carbyne while remaining stabilized. This low-temperature synthesis of long-chain, nearly free-standing carbyne within large-diameter SWCNTs offers new opportunities for exploring 1D physics and the unique properties of carbyne for potential applications.

physics.chem-ph↗

arXiv2022

The role of the bile salt surfactant sodium deoxycholate in aqueous two-phase separation of single-wall carbon nanotubes revealed by systematic parameter variations

Aqueous two-phase (ATP) extraction has been demonstrated as a fast, scalable, and effective separation technique to sort single-wall carbon nanotubes (SWCNTs) according to their diameter and chiral structure. The exact mechanism behind the chirality-dependent migration of SWCNTs between the two phases is however not completely understood, and depends on many parameters (e.g., choice of surfactants and their concentration, pH, temperature, ...), making it difficult to optimize the multivariable parameter space. In this work, we present a systematic study of the choice and concentration of specific surfactants on the ATP sorting, by performing a series of single-step ATP separations in which each time only one parameter is systematically varied, while monitoring the structure-specific migration of every SWCNT chirality between both phases with detailed wavelength-dependent spectroscopy. These systematic studies reveal that the diameter-dependent stacking of a discrete number of sodium deoxycholate molecules fitting around the SWCNT circumference determines the separation order in the form of a periodically modulated pattern as a function of SWCNT diameter. Addition of cosurfactants can be used to compete with the bile salt surfactant to enhance the separation yields, but does not affect the sorting order. The results are afterwards directly applied to predict the parameters required to separate specific chiral structures in just two ATP steps.

cond-mat.mes-hall↗

arXiv2021

Electronic structure of confined carbyne from joint wavelength-dependent resonant Raman spectroscopy and density functional theory investigations

Carbyne, i.e. an infinitely long linear carbon chain (LCC), has been at the focus of a lot of research for quite a while, yet its optical, electronic, and vibrational properties have only recently started to become accessible experimentally thanks to its synthesis inside carbon nanotubes (CNTs). While the role of the host CNT in determining the optical gap of the LCCs has been studied previously, little is known about the excited states of such ultralong LCCs. In this work, we employ the selectivity of wavelength-dependent resonant Raman spectroscopy to investigate the excited states of ultralong LCCs encapsulated inside double-walled CNTs. In addition to the optical gap, the Raman resonance profile shows three additional resonances. Corroborated with DFT calculations on LCCs with up to 100 C-atoms, we assign these resonances to a vibronic series of a different electronic state. Indeed, the calculations predict the existence of two optically allowed electronic states separated by an energy of 0.14-0.22 eV in the limit of an infinite chain, in agreement with the experimental results. Furthermore, among these two states, the one with highest energy is also characterized by the largest electron-vibration couplings, which explains the corresponding vibronic series of overtones.

physics.chem-ph↗

arXiv2021

Ultrasonication-Induced Extraction of Inner Shells from Double-Wall Carbon Nanotubes Characterized via In Situ Spectroscopy after Density Gradient Ultracentrifugation

Even though ultrasonication is considered to be an effective method to disperse carbon nanotubes (CNTs), its devastating effects on the nanotubes are often neglected. Here, even mild ultrasonication is found to rapidly extract the inner single-wall CNTs (SWCNTs) from the outer shells of the double-wall CNTs (DWCNTs). As-synthesized DWCNTs are gently solubilized in a surfactant solution, strictly avoiding any ultrasonication, followed by two consecutive density gradient ultracentrifugation (DGU) steps to obtain a purified colloidal solution of isolated DWCNTs. The latter is carefully selected based on in situ resonant Raman (RRS) and fluorescence (PL) spectroscopy, measured as a function of depth directly in the ultracentrifuge tube after DGU. These purified DWCNTs are ultrasonicated in successive time steps while intermittently probing the sample via RRS and PL spectroscopy. These results unravel the very fast increasing yet saturating extraction mechanism that leads to the formation of fluorescing SWCNTs. A statistical high-resolution transmission electron microscopy study confirms the drastic increase in SWCNTs after ultrasonication, and evidences that ultrasonication forms SWCNTs from both the inner and outer shells of the DWCNTs. This study demonstrates how easily ultrasonication extracts SWCNTs from individually solubilized DWCNTs, unavoidably complicating any further spectroscopic studies on DWCNTs severely.

cond-mat.mes-hall↗

arXiv2020

Assessing the reliability of the Raman peak counting method for the characterization of SWCNT diameter distributions: a cross-characterization with TEM

Resonant Raman spectroscopy is a widely used technique for single-walled carbon nanotube (SWCNT) characterization, in particular in the radial breathing mode (RBM) range which provides direct information on the structure of the nanotube in resonance. The RBM peak counting method, i.e. acquiring Raman spectrum grids on a substrate with a select set of discrete laser lines and counting RBM peaks as single nanotubes, is frequently used to characterize SWCNT growth samples, despite the many factors that can induce errors in the results. In this work, we cross-characterize the diameter distributions obtained through this methodology with diameter distributions obtained by counting SWCNT diameters in transmission electron microscopy (TEM) and discuss the different results and biases between the techniques. This study is performed on a broad diameter distribution sample, and on two chirality-enriched samples whose chirality distributions are determined by photoluminescence excitation spectroscopy (PLE) and statistical analysis of high resolution TEM (HRTEM) images. We show that the largest differences between the Raman peak counting and TEM diameter distributions stem from the chirality-dependence of SWCNT Raman cross-sections and the patchy vision offered by the use of only a few discrete excitation wavelengths. The effect of the substrate and TEM-related biases are also discussed.

cond-mat.mes-hall↗

arXiv2020

Well-defined sub-nanometer graphene ribbons synthesized inside carbon nanotubes

Graphene nanoribbons with sub-nanometer widths are extremely interesting for nanoscale electronics and devices as they combine the unusual transport properties of graphene with the opening of a band gap due to quantum confinement in the lateral dimension. Strong research efforts are presently paid to grow such nanoribbons. Here we show the synthesis of 6- and 7-armchair graphene nanoribbons, with widths of 0.61 and 0.74 nm, and excitonic gaps of 1.83 and 2.18 eV, by high-temperature vacuum annealing of ferrocene molecules inside single-walled carbon nanotubes. The encapsulation of the so-obtained graphene nanoribbons is proved by atomic resolution electron microscopy, while their assignment is provided by a combination of an extensive wavelength-dependent Raman scattering characterization and quantum-chemical calculations. These findings enable a facile and scalable approach leading to the controlled growth and detailed analysis of well-defined sub-nanometer graphene nanoribbons.

cond-mat.mtrl-sci↗

arXiv2017

Electronic band gaps of confined linear carbon chains ranging from polyyne to carbyne

Ultra long linear carbon chains of more than 6000 carbon atoms have recently been synthesized within double-walled carbon nanotubes, and they show a promising new route to one--atom--wide semiconductors with a direct band gap. Theoretical studies predicted that this band gap can be tuned by the length of the chains, the end groups, and their interactions with the environment. However, different density functionals lead to very different values of the band gap of infinitely long carbyne. In this work, we applied resonant Raman excitation spectroscopy with more than 50 laser wavelengths to determine for the first time the band gap of long carbon chains encapsulated inside DWCNTs. The experimentally determined band gaps ranging from 2.253 to 1.848 eV follow a linear relation with Raman frequency. This lower bound is the smallest band gap of linear carbon chains observed so far. The comparison with experimental data obtained for short chains in gas phase or in solution demonstrates the effect of the DWCNT encapsulation, leading to an essential downshift of the band gap. This is explained by the interaction between the carbon chain and the host tube, which greatly modifies the chain's bond length alternation.

cond-mat.mtrl-sci↗

arXiv2012

Luminescence Properties of Individual Empty and Water-filled Single-Walled Carbon Nanotubes

The influence of water-filling on the photoluminescence (PL) properties of SWCNTs is studied by ensemble and single-molecule PL spectroscopy. Red-shifted PL and PL excitation spectra are observed upon water filling for 16 chiralities and can be used to unambiguously distinguish empty SWCNTs from filled ones. The effect of water-filling on the optical transitions is well reproduced by a continuum dielectric constant model previously developed to describe the influence of the nanotube outer environment. Empty nanotubes display narrower luminescence lines and lower inhomogeneous broadening, signatures of reduced extrinsic perturbations. The radial breathing mode (RBM) phonon side band is clearly observed in the PL spectrum of small diameter empty tubes and a strong exciton-phonon coupling is measured for this vibration. Biexponential PL decays are observed for empty and water filled tubes, and only the short living component is influenced by the water-filling. This may be attributed to a shortening of the radiative lifetime of the bright state by the inner dielectric environment.

cond-mat.mes-hall↗