arXiv subjects

Wolfgang Alt

Publications and source records attributed to Wolfgang Alt.

At least 19 recordsLinked to original sources

arXiv2026

Direct laser-written optomechanical double membranes in an optical microcavity

Optomechanical membrane-in-the-middle systems that comprise several coupled compliant membranes offer enhanced optomechanical coupling and collective dynamics. Recent realizations were fundamentally restricted to two membranes and to limited structural optimization of the involved membranes due to their intricate fabrication and experimental integration. Here, we present a fiber-based Fabry-Perot microcavity incorporating monolithically integrated double-membrane resonators fabricated by 3D direct laser writing. We realize controllable mechanical mode hybridization of membranes with coupling rates of up to $J_{\mathrm{mech}}/2\pi = 0.16$ MHz, exceeding the mechanical linewidths. We demonstrate enhanced collective optomechanical coupling of the membrane stack's breathing mode, reaching collective coupling strengths of up to $g_{\mathrm{col}}^{(-)}/2\pi \approx 0.1$ MHz. Our transfer-matrix calculations predict further substantial enhancements with realistic reductions of membrane thickness and spacing, and a larger number of membranes. Our results establish direct laser-written membrane arrays as a scalable platform for multimode cavity optomechanics, combining tunable mechanical interactions, enhanced collective optomechanical coupling, and scalability towards larger mechanically coupled resonator systems.

physics.optics↗

arXiv2026

Spatial correlations of photons interacting via transverse Rydberg blockade

We develop a theory of the transverse spatial dynamics of two interacting photons in a Rydberg nonlinear medium. Extending the well-studied one-dimensional case, we explore both longitudinal and transverse correlations of photons propagating as Rydberg polaritons. We identify distinct behaviors and scaling laws for these correlations, arising from fundamentally different mechanisms in the two directions: diffraction for transverse correlations and diffusion for longitudinal correlations. We develop a model incorporating a Gaussian optical beam and an inhomogeneous atomic density distribution, from which we derive quantitative predictions for correlation functions in both directions. We further show that the propagation equations can be reduced to a single Schr\"odinger-like equation, allowing approximate solutions that are supported by full numerical results. Our findings indicate that the transverse correlation length is determined primarily by the blockade radius, whereas the longitudinal correlation length is limited by bandwidth. These results establish transverse Rydberg blockade as a distinct and measurable correlation mechanism and show that spatial photon correlations provide a direct means of measuring the blockade radius.

quant-ph↗

arXiv2025

Revealing electron-ytterbium interactions through Rydberg molecular spectroscopy

Divalent atoms have emerged as powerful alternatives to alkalis in ultracold atom platforms, offering unique advantages arising from their two-electron structure. Among these species, ytterbium (Yb) is especially promising, yet its anionic properties and its Rydberg spectrum remain comparatively unexplored. In this work, we perform a first and comprehensive experimental and theoretical investigation of ultralong-range Rydberg molecules (ULRMs) of $^{174}$Yb in $6sns\,^1S_0$ Rydberg states across nearly two decades in principal quantum number $n$ and three orders of magnitude in molecular binding energy. Using the Coulomb Green's function formalism, we compute Born-Oppenheimer molecular potentials describing the Rydberg atom in the presence of a ground-state perturber and achieve quantitative agreement with high-resolution molecular spectra. This enables the extraction of low-energy electron-Yb scattering phase shifts, including the zero-energy $s$-wave scattering length and the positions of two spin-orbit split $p$-wave shape resonances. Our results provide strong evidence that the Yb$^{-}$ anion exists only as a metastable resonance.% We additionally show the sensitivity of ULRM spectra to the atomic quantum defects, using this to determine the quantum defect of the $6s23f\, ^1F_3$ state. Together, these findings establish Yb ULRMs as a powerful probe of electron-Yb interactions and lay essential groundwork for future Rydberg experiments with divalent atoms.

physics.atom-ph↗

arXiv2025

Entanglement of mechanical oscillators mediated by a Rydberg tweezer chain

Mechanical systems provide a unique test bed for studying quantum phenomena at macroscopic length scales. However, realizing quantum states that feature quantum correlations among macroscopic mechanical objects remains an experimental challenge. Here, we propose a quantum system in which two micro-electromechanical oscillators interact through a chain of Rydberg atoms confined in optical tweezers. We demonstrate that the coherent dynamics of the system generate entanglement between the oscillators. Furthermore, we utilize the tunability of the radiative decay of the Rydberg atoms for dissipative entanglement generation. Our results highlight the potential to exploit the flexibility and tunability of Rydberg atom chains to generate nonclassical correlations between distant mechanical oscillators.

quant-ph↗

arXiv2025

Magic running- and standing-wave optical traps for Rydberg atoms

Magic trapping of ground and Rydberg states, which equalizes the AC Stark shifts of these two levels, enables increased ground-to-Rydberg state coherence times. We measure via photon storage and retrieval how the ground-to-Rydberg state coherence depends on trap wavelength for two different traps and find different optimal wavelengths for a one-dimensional optical lattice trap and a running wave optical dipole trap. Comparison to theory reveals that this is caused by the Rydberg electron sampling different potential landscapes. The observed difference increases for higher principal quantum numbers, where the extent of the Rydberg electron wave function becomes larger than the optical lattice period. Our analysis shows that optimal magic trapping conditions depend on the trap geometry, in particular for optical lattices and tweezers.

physics.atom-ph↗

arXiv2024

Two-color Ytterbium MOT in a compact dual-chamber setup

We present an experimental scheme for producing ultracold Ytterbium atoms in a compact dual-chamber setup. A dispenser-loaded two-dimensional (2D) magneto-optical trap (MOT) using permanent magnets and operating on the broad $^1S_0\to {}^1P_1$ singlet transition delivers over $10^7$ atoms per second through a differential pumping stage into a three-dimensional (3D) MOT. The two-color 3D MOT uses the broad singlet transition to accumulate $\sim\!2\times 10^7$ atoms of $^{174}\text{Yb}$ within $2.5~\text{s}$ and subsequently the narrow $^1S_0\to {}^3P_1$ intercombination line to cool the atomic cloud to below $10~\mathrm{μK}$. We report optimized parameters for each stage of the atom collection sequence, achieving high transfer efficiency. We find that shelving into the triplet state during the broad-transition MOT almost doubles the number of trapped atoms.

physics.atom-ph↗

arXiv2024

Boson sampling with ultracold atoms in a programmable optical lattice

Sampling from a quantum distribution can be exponentially hard for classical computers and yet could be performed efficiently by a noisy intermediate-scale quantum device. A prime example of a distribution that is hard to sample is given by the output states of a linear interferometer traversed by $N$ identical boson particles. Here, we propose a scheme to implement such a boson sampling machine with ultracold atoms in a polarization-synthesized optical lattice. We experimentally demonstrate the basic building block of such a machine by revealing the Hong-Ou-Mandel interference of two bosonic atoms in a four-mode interferometer. To estimate the sampling rate for large $N$, we develop a theoretical model based on a master equation that accounts for particle losses, but not include technical errors. Our results show that atomic samplers have the potential to achieve quantum advantage over today's best supercomputers with $N \gtrsim 40$.

quant-ph↗

arXiv2023

Three-dimensional imaging of single atoms in an optical lattice via helical point-spread-function engineering

We demonstrate a method for determining the three-dimensional location of single atoms in a quantum gas microscopy system using a phase-only spatial light modulator to modify the point-spread function of the high-resolution imaging system. Here, the typical diffracted spot generated by a single atom as a point source is modified to a double spot that rotates as a function of the atom's distance from the focal plane of the imaging system. We present and numerically validate a simple model linking the rotation angle of the point-spread function with the distance to the focal plane. We show that, when aberrations in the system are carefully calibrated and compensated for, this method can be used to determine an atom's position to within a single lattice site in a single experimental image, extending quantum simulation with microscopy systems further into the regime of three dimensions.

quant-ph↗

arXiv2022

Direct measurement of the Wigner function of atoms in an optical trap

We present a scheme that uses Ramsey interferometry to directly probe the Wigner function of a neutral atom confined in an optical trap. The proposed scheme relies on the well-established fact that the Wigner function at a given point $(x,p)$ in phase space is proportional to the expectation value of the parity operator relative to that point. In this work, we show that parity-even and parity-odd motional states can be mapped to two distinct internal states of the atom by using state-dependent trapping potentials. The Wigner function can thus be measured point-by-point in phase space with a single, direct measurement of the internal state population. Numerical simulations show that the scheme is robust in that it applies not only to deep, harmonic potentials but also to shallower, anharmonic traps.

quant-ph↗

arXiv2022

A fiber Fabry-Perot cavity based spectroscopic gas sensor

Optical spectroscopic sensors are powerful tools for analysing gas mixtures in industrial and scientific applications. Whilst highly sensitive spectrometers tend to have a large footprint, miniaturized optical devices usually lack sensitivity or wideband spectroscopic coverage. By employing a widely tunable, passively stable fiber Fabry-Perot cavity (FFPC), we demonstrate an absorption spectroscopic device that continuously samples over several tens of terahertz. Both broadband scans using cavity mode width spectroscopy to identify the spectral fingerprints of analytes and a fast, low-noise scan method for single absorption features to determine concentrations are exemplary demonstrated for the oxygen A-band. The novel scan method uses an injected modulation signal in a Pound-Drever-Hall feedback loop together with a lock-in measurement to reject noise at other frequencies. The FFPC-based approach provides a directly fiber coupled, extremely miniaturized, light-weight and robust platform for analyzing small analyte volumes that can straightforwardly be extended to sensing at different wavelength ranges, liquid analytes and other spectroscopic techniques with only little adjustments of the device platform.

physics.optics↗

arXiv2022

Raman Imaging of Atoms Inside a High-bandwidth Cavity

High-bandwidth, fiber-based optical cavities are a promising building block for future quantum networks. They are used to resonantly couple stationary qubits such as single or multiple atoms with photons routing quantum information into a fiber network at high rates. In high-bandwidth cavities, standard fluorescence imaging on the atom-cavity resonance line for controlling atom positions is impaired since the Purcell effect strongly suppresses all-directional fluorescence. Here, we restore imaging of $^{87}$Rb atoms strongly coupled to such a fiber Fabry-Pérot cavity by detecting the repumper fluorescence which is generated by continuous and three-dimensional Raman sideband cooling. We have carried out a detailed spectroscopic investigation of the repumper-induced differential light shifts affecting the Raman resonance, dependent on intensity and detuning. Our analysis identifies a compromise regime between imaging signal-to-noise ratio and survival rate, where physical insight into the role of dipole-force fluctuations in the heating dynamics of trapped atoms is gained.

quant-ph↗

arXiv2022

Achievements and Perspectives of Optical Fiber Fabry-Perot Cavities

Fabry-Perot interferometers have stimulated numerous scientific and technical applications ranging from high resolution spectroscopy over metrology, optical filters to interfaces of light and matter at the quantum limit and more. End facet machining of optical fibers has enabled the miniaturization of optical Fabry-Perot cavities. Integration with fiber wave guide technology allows for small yet open devices with favorable scaling properties including mechanical stability and compact mode geometry. These Fiber Fabry-Perot Cavities (FFPCs) are stimulating extended applications in many fields including cavity quantum electrodynamics, optomechanics, sensing, nonlinear optics and more. Here we summarize the state of the art of devices based on Fiber Fabry-Perot Cavities, provide an overview of applications and conclude with expected further research activities.

physics.optics↗

arXiv2021

Observing crossover between quantum speed limits

Quantum mechanics sets fundamental limits on how fast quantum states can be transformed in time. Two well-known quantum speed limits are the Mandelstam-Tamm and the Margolus-Levitin bounds, which relate the maximum speed of evolution to the system's energy uncertainty and mean energy, respectively. Here, we test concurrently both limits in a multi-level system by following the motion of a single atom in an optical trap using fast matter wave interferometry. Our data reveal two different regimes: one where the Mandelstam-Tamm limit constrains the evolution at all times, and a second where a crossover to the Margolus-Levitin limit is manifested at longer times. We take a geometric approach to quantify the deviation from the speed limit, measuring how much the matter wave's quantum evolution deviates from the geodesic path in the Hilbert space of the multi-level system. Our results, establishing quantum speed limits beyond the simple two-level system, are important to understand the ultimate performance of quantum computing devices and related advanced quantum technologies.

quant-ph↗

arXiv2021

Ramsey imaging of optical traps

Mapping the potential landscape with high spatial resolution is crucial for quantum technologies based on ultracold atoms. Yet, imaging optical dipole traps is challenging because purely optical methods, commonly used to profile laser beams in free space, are not applicable in vacuum. In this work, we demonstrate precise in-situ imaging of optical dipole traps by probing a hyperfine transition with Ramsey interferometry. Thereby, we obtain an absolute map of the potential landscape with micrometer resolution and shot-noise-limited spectral precision. The idea of the technique is to control the polarization ellipticity of the trap laser beam to induce a differential light shift proportional to the trap potential. By studying the response to polarization ellipticity, we uncover a small but significant nonlinearity in addition to a dominant linear behavior, which is explained by the geometric distribution of the atomic ensemble. Our technique for imaging of optical traps can find wide application in quantum technologies based on ultracold atoms, as it applies to multiple atomic species and is not limited to a particular wavelength or trap geometry.

cond-mat.quant-gas↗

arXiv2020

Tunable Fiber Fabry-Perot Cavities with High Passive Stability

We present three high finesse tunable monolithic fiber Fabry-Perot cavities (FFPCs) with high passive mechanical stability. The fiber mirrors are fixed inside slotted glass ferrules, which guarantee an inherent alignment of the resonators. An attached piezoelectric element enables fast tuning of the FFPC resonance frequency over the entire free-spectral range for two of the designs. Stable locking of the cavity resonance is achieved for feedback bandwidths as low as $20\,$mHz, demonstrating the high passive stability. At the other limit, locking bandwidths up to $27\,$kHz, close to the first mechanical resonance, can be obtained. The root-mean-square frequency fluctuations are suppressed down to $\sim 2\,$% of the cavity linewidth. Over a wide frequency range, the frequency noise is dominated by the thermal noise limit of the system's mechanical resonances. The demonstrated small footprint devices can be used advantageously in a broad range of applications like cavity-based sensing techniques, optical filters or quantum light-matter interfaces.

physics.ins-det↗

arXiv2020

Demonstration of quantum brachistochrones between distant states of an atom

Transforming an initial quantum state into a target state through the fastest possible route---a quantum brachistochrone---is a fundamental challenge for many technologies based on quantum mechanics. Here, we demonstrate fast coherent transport of an atomic wave packet over a distance of 15 times its size---a paradigmatic case of quantum processes where the target state cannot be reached through a local transformation. Our measurements of the transport fidelity reveal the existence of a minimum duration---a quantum speed limit---for the coherent splitting and recombination of matter waves. We obtain physical insight into this limit by relying on a geometric interpretation of quantum state dynamics. These results shed light upon a fundamental limit of quantum state dynamics and are expected to find relevant applications in quantum sensing and quantum computing.

quant-ph↗

arXiv2019

Extending Quantum Links: Modules for Fiber- and Memory-Based Quantum Repeaters

We analyze elementary building blocks for quantum repeaters based on fiber channels and memory stations. Implementations are considered for three different physical platforms, for which suitable components are available: quantum dots, trapped atoms and ions, and color centers in diamond. We evaluate and compare the performances of basic quantum repeater links for these platforms both for present-day, state-of-the-art experimental parameters as well as for parameters that could in principle be reached in the future. The ultimate goal is to experimentally explore regimes at intermediate distances, up to a few 100 km, in which the repeater-assisted secret key transmission rates exceed the maximal rate achievable via direct transmission. We consider two different protocols, one of which is better adapted to the higher source clock rate and lower memory coherence time of the quantum dot platform, while the other circumvents the need of writing photonic quantum states into the memories in a heralded, non-destructive fashion. The elementary building blocks and protocols can be connected in a modular form to construct a quantum repeater system that is potentially scalable to large distances.

quant-ph↗

arXiv2019

Ground-State Cooling of a Single Atom in a High-Bandwidth Cavity

We report on vibrational ground-state cooling of a single neutral atom coupled to a high-bandwidth Fabry-Pérot cavity. The cooling process relies on degenerate Raman sideband transitions driven by dipole trap beams, which confine the atoms in three dimensions. We infer a one-dimensional motional ground state population close to $90~\%$ by means of Raman spectroscopy. Moreover, lifetime measurements of a cavity-coupled atom exceeding 40 s imply three-dimensional cooling of the atomic motion, which makes this resource-efficient technique particularly interesting for cavity experiments with limited optical access.

physics.atom-ph↗