SearcharxivSearch

arXiv subjects

X. D. Sun

Publications and source records attributed to X. D. Sun.

9 recordsLinked to original sources

Exploring Hyperon Skyrme Forces in Multi-$\Lambda$ Hypernuclei and Neutron Star Matter

A major source of uncertainty in modeling the strangeness-rich interiors of neutron stars arises from the poorly constrained two-body and three-body interactions among hyperons and nucleons. We perform a comprehensive Bayesian analysis of the $\Lambda\Lambda$ and $\Lambda\Lambda N$ interaction parameters within the Skyrme Hartree-Fock framework, constrained by both hypernuclei experimental data and astrophysical observations. Our results show that the parameter space of the $\Lambda\Lambda$ interaction is tightly constrained by combining nuclear and astrophysical data, while the parameters of the $\Lambda\Lambda N$ three-body interaction remain sensitive to astrophysical inputs alone. Specifically, the local, momentum-independent two-body interaction parameter $\lambda_0$ is tightly constrained and predominantly attractive, while the momentum-dependent parameters $\lambda_1$ and $\lambda_2$ contribute repulsive effects at high densities. A key role is played by the $\Lambda\Lambda$ potential depth in pure $\Lambda$ matter, which effectively constrains the two-body $\Lambda\Lambda$ interaction and governs the balance between attraction at low densities and repulsion at high densities. The repulsive components of $\Lambda\Lambda$ interactions then decrease hyperon fractions and reconcile hyperon-rich equations of state with the observed $\sim2\,M_{\odot}$ neutron stars, increasing the maximum mass by up to 22\%. The inclusion of $\Lambda\Lambda N$ three-body forces further stiffens the EOS, raising the maximum mass by up to $\sim 0.1\,M_{\odot}$. Our study represents a promising step toward a complete, experimentally grounded description of dense matter across a wide range of densities and strangeness compositions.

nucl-th

Dynamics of surface electrons in a topological insulator: cyclotron resonance at room temperature

The ability to manipulate the surface states of topological insulators using electric or magnetic fields under ambient conditions is a key step toward their integration into future electronic and optoelectronic devices. Here, we demonstrate - using cyclotron resonance measurements on a tin-doped BiSbTe$_2$S topological insulator - that moderate magnetic fields can quantize massless surface electrons into Landau levels even at room temperature. This finding suggests that surface-state electrons can behave as long-lived quasiparticles at unexpectedly high temperatures.

cond-mat.mes-hall

Electronic band structure of Sb2Te3

Here we report on Landau level spectroscopy of an epitaxially grown thin film of the topological insulator Sb2Te3, complemented by ellipsometry and magneto-transport measurements. The observed response suggests that Sb2Te3 is a direct-gap semiconductor with the fundamental band gap located at the Γpoint, or along the trigonal axis, and its width reaches Eg = 190 meV at low temperatures. Our data also indicate the presence of other low-energy extrema with a higher multiplicity in both the conduction and valence bands. The conclusions based on our experimental data are confronted with and to a great extent corroborated by the electronic band structure calculated using the GW method.

cond-mat.mtrl-sci

Determinant Quantum Monte Carlo Study of d-wave pairing in the Plaquette Hubbard Hamiltonian

Determinant Quantum Monte Carlo (DQMC) is used to determine the pairing and magnetic response for a Hubbard model built up from four-site clusters -a two-dimensional square lattice consisting of elemental 2x2 plaquettes with hopping $t$ and on-site repulsion $U$ coupled by an inter-plaquette hopping $t' \leq t$. Superconductivity in this geometry has previously been studied by a variety of analytic and numeric methods, with differing conclusions concerning whether the pairing correlations and transition temperature are raised near half-filling by the inhomogeneous hopping or not. For $U/t=4$, DQMC indicates an optimal $t'/t \approx 0.4$ at which the pairing vertex is most attractive. The optimal $t'/t$ increases with $U/t$. We then contrast our results for this plaquette model with a Hamiltonian which instead involves a regular pattern of site energies whose large site energy limit is the three band CuO$_2$ model; we show that there the inhomogeneity rapidly, and monotonically, suppresses pairing.

cond-mat.str-el

Charge Gaps at Fractional Fillings in Boson Hubbard Ladders

The Bose-Hubbard Hamiltonian describes the competition between superfluidity and Mott insulating behavior at zero temperature and commensurate filling as the strength of the on-site repulsion is varied. Gapped insulating phases also occur at non-integer densities as a consequence of longer ranged repulsive interactions. In this paper we explore the formation of gapped phases in coupled chains due instead to anisotropies $t_x \neq t_y$ in the bosonic hopping, extending the work of Crepin {\it et al.} [Phys. Rev. B 84, 054517 (2011)] on two coupled chains, where a gap was shown to occur at half filling for arbitrarily small interchain hopping $t_y$. Our main result is that, unlike the two-leg chains, for three- and four-leg chains, a charge gap requires a finite nonzero critical $t_y$ to open. However, these finite values are surprisingly small, well below the analogous values required for a fermionic band gap to open.

cond-mat.quant-gas

Formation of a Double-decker Magnetic Flux Rope in the Sigmoidal Solar Active Region 11520

In this paper, we address the formation of a magnetic flux rope (MFR) that erupted on 2012 July 12 and caused a strong geomagnetic storm event on July 15. Through analyzing the long-term evolution of the associated active region observed by the Atmospheric Imaging Assembly and the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory, it is found that the twisted field of an MFR, indicated by a continuous S-shaped sigmoid, is built up from two groups of sheared arcades near the main polarity inversion line half day before the eruption. The temperature within the twisted field and sheared arcades is higher than that of the ambient volume, suggesting that magnetic reconnection most likely works there. The driver behind the reconnection is attributed to shearing and converging motions at magnetic footpoints with velocities in the range of 0.1--0.6 km s$^{-1}$. The rotation of the preceding sunspot also contributes to the MFR buildup. Extrapolated three-dimensional non-linear force-free field structures further reveal the locations of the reconnection to be in a bald-patch region and in a hyperbolic flux tube. About two hours before the eruption, indications for a second MFR in the form of an S-shaped hot channel are seen. It lies above the original MFR that continuously exists and includes a filament. The whole structure thus makes up a stable double-decker MFR system for hours prior to the eruption. Eventually, after entering the domain of instability, the high-lying MFR impulsively erupts to generate a fast coronal mass ejection and X-class flare; while the low-lying MFR remains behind and continuously maintains the sigmoidicity of the active region.

astro-ph.SR

Phase Stability in the Two dimensional Anisotropic Boson Hubbard Hamiltonian

The two dimensional square lattice hard-core boson Hubbard model with near neighbor interactions has a `checkerboard' charge density wave insulating phase at half-filling and sufficiently large intersite repulsion. When doped, rather than forming a supersolid phase in which long range charge density wave correlations coexist with a condensation of superfluid defects, the system instead phase separates. However, it is known that there are other lattice geometries and interaction patterns for which such coexistence takes place. In this paper we explore the possibility that anisotropic hopping or anisotropic near neighbor repulsion might similarly stabilize the square lattice supersolid. By considering the charge density wave structure factor and superfluid density for different ratios of interaction strength and hybridization in the $\hat x$ and $\hat y$ directions, we conclude that phase separation still occurs.

cond-mat.str-el

Investigating Two Successive Flux Rope Eruptions In A Solar Active Region

We investigate two successive flux rope (FR1 and FR2) eruptions resulting in two coronal mass ejections (CMEs) on 2012 January 23. Both FRs appeared as an EUV channel structure in the images of high temperature passbands of the Atmospheric Imaging Assembly prior to the CME eruption. Through fitting their height evolution with a function consisting of linear and exponential components, we determine the onset time of the FR impulsive acceleration with high temporal accuracy for the first time. Using this onset time, we divide the evolution of the FRs in the low corona into two phases: a slow rise phase and an impulsive acceleration phase. In the slow rise phase of the FR1, the appearance of sporadic EUV and UV brightening and the strong shearing along the polarity inverse line indicates that the quasi-separatrix-layer reconnection likely initiates the slow rise. On the other hand for the FR2, we mainly contribute its slow rise to the FR1 eruption, which partially opened the overlying field and thus decreased the magnetic restriction. At the onset of the impulsive acceleration phase, the FR1 (FR2) reaches the critical height of 84.4$\pm$11.2 Mm (86.2$\pm$13.0 Mm) where the decline of the overlying field with height is fast enough to trigger the torus instability. After a very short interval ($\sim$2 minutes), the flare emission began to enhance. These results reveal the compound activity involving multiple magnetic FRs and further suggest that the ideal torus instability probably plays the essential role of initiating the impulsive acceleration of CMEs.

astro-ph.SR

Modeling Magnetic Field Structure of a Solar Active Region Corona using Nonlinear Force-Free Fields in Spherical Geometry

We test a nonlinear force-free field (NLFFF) optimization code in spherical geometry using an analytical solution from Low and Lou. Several tests are run, ranging from idealized cases where exact vector field data are provided on all boundaries, to cases where noisy vector data are provided on only the lower boundary (approximating the solar problem). Analytical tests also show that the NLFFF code in the spherical geometry performs better than that in the Cartesian one when the field of view of the bottom boundary is large, say, $20^\circ \times 20^\circ$. Additionally, We apply the NLFFF model to an active region observed by the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO) both before and after an M8.7 flare. For each observation time, we initialize the models using potential field source surface (PFSS) extrapolations based on either a synoptic chart or a flux-dispersal model, and compare the resulting NLFFF models. The results show that NLFFF extrapolations using the flux-dispersal model as the boundary condition have slightly lower, therefore better, force-free and divergence-free metrics, and contain larger free magnetic energy. By comparing the extrapolated magnetic field lines with the extreme ultraviolet (EUV) observations by the Atmospheric Imaging Assembly (AIA) on board SDO, we find that the NLFFF performs better than the PFSS not only for the core field of the flare productive region, but also for large EUV loops higher than 50 Mm.

astro-ph.SR