arXiv subjects

Xianbin Wang

Publications and source records attributed to Xianbin Wang.

At least 163 records · Page 9Linked to original sources

arXiv2019

Time-Varying Massive MIMO Channel Estimation: Capturing, Reconstruction and Restoration

On the time-varying channel estimation, the traditional downlink (DL) channel restoration schemes usually require the reconstruction for the covariance of downlink process noise vector, which is dependent on DL channel covariance matrix (CCM). However, the acquisition of the CCM leads to unacceptable overhead in massive MIMO systems. To tackle this problem, in this paper, we propose a novel scheme for the DL channel tracking. First, with the help of virtual channel representation (VCR), we build a dynamic uplink (UL) massive MIMO channel model with the consideration of off-grid refinement. Then, a coordinate-wise maximization based expectation maximization (EM) algorithm is adopted for capturing the model parameters, including the spatial signatures, the time-correlation factors, the off-grid bias, the channel power, and the noise power. Thanks to the angle reciprocity, the spatial signatures, timecorrelation factors and off-grid bias of the DL channel model can be reconstructed with the knowledge of UL ones. However, the other two kinds of model parameters are closely related with the carrier frequency, which cannot be perfectly inferred from the UL ones. Instead of relearning the DL model parameters with dedicated training, we resort to the optimal Bayesian Kalman filter (OBKF) method to accurately track the DL channel with the partially prior knowledge. At the same time, the model parameters will be gradually restored. Specially, the factor-graph and the Metropolis Hastings MCMC are utilized within the OBKF framework. Finally, numerical results are provided to demonstrate the efficiency of our proposed scheme.

cs.IT↗

arXiv2019

Predicting the Mumble of Wireless Channel with Sequence-to-Sequence Models

Accurate prediction of fading channel in the upcoming transmission frame is essential to realize adaptive transmission for transmitters, and receivers with the ability of channel prediction can also save some computations of channel estimation. However, due to the rapid channel variation and channel estimation error, reliable prediction is hard to realize. In this situation, an appropriate channel model should be selected, which can cover both the statistical model and small scale fading of channel, this reminds us the natural languages, which also have statistical word frequency and specific sentences. Accordingly, in this paper, we take wireless channel model as a language model, and the time-varying channel as talking in this language, while the realistic noisy estimated channel can be compared with mumbling. Furthermore, in order to utilize as much as possible the information a channel coefficient takes, we discard the conventional two features of absolute value and phase, replacing with hundreds of features which will be learned by our channel model, to do this, we use a vocabulary to map a complex channel coefficient into an ID, which is represented by a vector of real numbers. Recurrent neural networks technique is used as its good balance between memorization and generalization, moreover, we creatively introduce sequence-to-sequence (seq2seq) models in time series channel prediction, which can translates past channel into future channel. The results show that realistic channel prediction with superior performance relative to channel estimation is attainable.

eess.SP↗

arXiv2019

Learning to Flip Successive Cancellation Decoding of Polar Codes with LSTM Networks

The key to successive cancellation (SC) flip decoding of polar codes is to accurately identify the first error bit. The optimal flipping strategy is considered difficult due to lack of an analytical solution. Alternatively, we propose a deep learning aided SC flip algorithm. Specifically, before each SC decoding attempt, a long short-term memory (LSTM) network is exploited to either (i) locate the first error bit, or (ii) undo a previous `wrong' flip. In each SC attempt, the sequence of log likelihood ratios (LLRs) derived in the previous SC attempt is exploited to decide which action to take. Accordingly, a two-stage training method of the LSTM network is proposed, i.e., learn to locate first error bits in the first stage, and then to undo `wrong' flips in the second stage. Simulation results show that the proposed approach identifies error bits more accurately and achieves better performance than the state-of-the-art SC flip algorithms.

cs.IT↗

arXiv2019

Short-term Road Traffic Prediction based on Deep Cluster at Large-scale Networks

Short-term road traffic prediction (STTP) is one of the most important modules in Intelligent Transportation Systems (ITS). However, network-level STTP still remains challenging due to the difficulties both in modeling the diverse traffic patterns and tacking high-dimensional time series with low latency. Therefore, a framework combining with a deep clustering (DeepCluster) module is developed for STTP at largescale networks in this paper. The DeepCluster module is proposed to supervise the representation learning in a visualized way from the large unlabeled dataset. More specifically, to fully exploit the traffic periodicity, the raw series is first split into a number of sub-series for triplets generation. The convolutional neural networks (CNNs) with triplet loss are utilized to extract the features of shape by transferring the series into visual images. The shape-based representations are then used for road segments clustering. Thereafter, motivated by the fact that the road segments in a group have similar patterns, a model sharing strategy is further proposed to build recurrent NNs (RNNs)-based predictions through a group-based model (GM), instead of individual-based model (IM) in which one model are built for one road exclusively. Our framework can not only significantly reduce the number of models and cost, but also increase the number of training data and the diversity of samples. In the end, we evaluate the proposed framework over the network of Liuli Bridge in Beijing. Experimental results show that the DeepCluster can effectively cluster the road segments and GM can achieve comparable performance against the IM with less number of models.

cs.LG↗

arXiv2018

Towards Massive Machine Type Communications in Ultra-Dense Cellular IoT Networks: Current Issues and Machine Learning-Assisted Solutions

The ever-increasing number of resource-constrained Machine-Type Communication (MTC) devices is leading to the critical challenge of fulfilling diverse communication requirements in dynamic and ultra-dense wireless environments. Among different application scenarios that the upcoming 5G and beyond cellular networks are expected to support, such as eMBB, mMTC and URLLC, mMTC brings the unique technical challenge of supporting a huge number of MTC devices, which is the main focus of this paper. The related challenges include QoS provisioning, handling highly dynamic and sporadic MTC traffic, huge signalling overhead and Radio Access Network (RAN) congestion. In this regard, this paper aims to identify and analyze the involved technical issues, to review recent advances, to highlight potential solutions and to propose new research directions. First, starting with an overview of mMTC features and QoS provisioning issues, we present the key enablers for mMTC in cellular networks. Along with the highlights on the inefficiency of the legacy Random Access (RA) procedure in the mMTC scenario, we then present the key features and channel access mechanisms in the emerging cellular IoT standards, namely, LTE-M and NB-IoT. Subsequently, we present a framework for the performance analysis of transmission scheduling with the QoS support along with the issues involved in short data packet transmission. Next, we provide a detailed overview of the existing and emerging solutions towards addressing RAN congestion problem, and then identify potential advantages, challenges and use cases for the applications of emerging Machine Learning (ML) techniques in ultra-dense cellular networks. Out of several ML techniques, we focus on the application of low-complexity Q-learning approach in the mMTC scenarios. Finally, we discuss some open research challenges and promising future research directions.

eess.SP↗

arXiv2018

Learning-Aided Physical Layer Authentication as an Intelligent Process

Performance of the existing physical layer authentication schemes could be severely affected by the imperfect estimates and variations of the communication link attributes used. The commonly adopted static hypothesis testing for physical layer authentication faces significant challenges in time-varying communication channels due to the changing propagation and interference conditions, which are typically unknown at the design stage. To circumvent this impediment, we propose an adaptive physical layer authentication scheme based on machine-learning as an intelligent process to learn and utilize the complex and time-varying environment, and hence to improve the reliability and robustness of physical layer authentication. Explicitly, a physical layer attribute fusion model based on a kernel machine is designed for dealing with multiple attributes without requiring the knowledge of their statistical properties. By modeling the physical layer authentication as a linear system, the proposed technique directly reduces the authentication scope from a combined N-dimensional feature space to a single dimensional (scalar) space, hence leading to reduced authentication complexity. By formulating the learning (training) objective of the physical layer authentication as a convex problem, an adaptive algorithm based on kernel least-mean-square is then proposed as an intelligent process to learn and track the variations of multiple attributes, and therefore to enhance the authentication performance. Both the convergence and the authentication performance of the proposed intelligent authentication process are theoretically analyzed. Our simulations demonstrate that our solution significantly improves the authentication performance in time-varying environments.

cs.CR↗

arXiv2018

A Flip-Syndrome-List Polar Decoder Architecture for Ultra-Low-Latency Communications

We consider practical hardware implementation of Polar decoders. To reduce latency due to the serial nature of successive cancellation (SC), existing optimizations improve parallelism with two approaches, i.e., multi-bit decision or reduced path splitting. In this paper, we combine the two procedures into one with an error-pattern-based architecture. It simultaneously generates a set of candidate paths for multiple bits with pre-stored patterns. For rate-1 (R1) or single parity-check (SPC) nodes, we prove that a small number of deterministic patterns are required to guarantee performance preservation. For general nodes, low-weight error patterns are indexed by syndrome in a look-up table and retrieved in O(1) time. The proposed flip-syndrome-list (FSL) decoder fully parallelizes all constituent code blocks without sacrificing performance, thus is suitable for ultra-low-latency applications. Meanwhile, two code construction optimizations are presented to further reduce complexity and improve performance, respectively.

cs.IT↗

arXiv2018

Energy-Efficient Joint Offloading and Wireless Resource Allocation Strategy in Multi-MEC Server Systems

Mobile edge computing (MEC) is an emerging paradigm that mobile devices can offload the computation-intensive or latency-critical tasks to the nearby MEC servers, so as to save energy and extend battery life. Unlike the cloud server, MEC server is a small-scale data center deployed at a wireless access point, thus it is highly sensitive to both radio and computing resource. In this paper, we consider an Orthogonal Frequency-Division Multiplexing Access (OFDMA) based multi-user and multi-MEC-server system, where the task offloading strategies and wireless resources allocation are jointly investigated. Aiming at minimizing the total energy consumption, we propose the joint offloading and resource allocation strategy for latency-critical applications. Through the bi-level optimization approach, the original NP-hard problem is decoupled into the lower-level problem seeking for the allocation of power and subcarrier and the upper-level task offloading problem. Simulation results show that the proposed algorithm achieves excellent performance in energy saving and successful offloading probability (SOP) in comparison with conventional schemes.

cs.IT↗

arXiv2018

Mixed Málaga-$\mathcal{M}$ and Generalized-$\cal K$ Dual-Hop FSO/RF Systems with Interference

This paper investigates the impact of radio frequency (RF) cochannel interference (CCI) on the performance of dual-hop free-space optics (FSO)/RF relay networks. The considered FSO/RF system operates over mixed Málaga-$\mathcal{M}$/composite fading/shadowing generalized-$\cal K$ ($\cal GK$) channels with pointing errors. The {\rm H}-transform theory, wherein integral transforms involve Fox's {\rm H}-functions as kernels, is embodied into a unifying performance analysis framework that encompasses closed-form expressions for the outage probability, the average bit error rate (BER), and the ergodic capacity. By virtue of some {\rm H}-transform asymptotic expansions, the high signal-to-interference-plus-noise ratio (SINR) analysis culminates in easy-to-compute expressions for the outage probability and BER.

eess.SP↗

arXiv2018

Joint CSI Estimation, Beamforming and Scheduling Design for Wideband Massive MIMO System

This paper proposes a novel approach for designing channel estimation, beamforming and scheduling jointly for wideband massive multiple input multiple output (MIMO) systems. With the proposed approach, we first quantify the maximum number of user equipments (UEs) that can send pilots which may or may not be orthogonal. Specifically, when the channel has a maximum of $L$ multipath taps, and we allocate $\tilde{M}$ sub-carriers for the channel state information (CSI) estimation, a maximum of $\tilde{M}$ UEs CSI can be estimated ($L$ times compared to the conventional CSI estimation approach) in a massive MIMO regime. Then, we propose to schedule a subset of these UEs using greedy based scheduling to transmit their data on each sub-carrier with the proposed joint beamforming and scheduling design. We employ the well known maximum ratio combiner (MRC) beamforming approach in the uplink channel data transmission. All the analytical expressions are validated via numerical results, and the superiority of the proposed design over the conventional orthogonal frequency division multiplexing (OFDM) transmission approach is demonstrated using extensive numerical simulations in the long term evolution (LTE) channel environment. The proposed channel estimation and beamforming design is linear and simple to implement.

cs.IT↗

arXiv2018

Machine Intelligence Techniques for Next-Generation Context-Aware Wireless Networks

The next generation wireless networks (i.e. 5G and beyond), which would be extremely dynamic and complex due to the ultra-dense deployment of heterogeneous networks (HetNets), poses many critical challenges for network planning, operation, management and troubleshooting. At the same time, generation and consumption of wireless data are becoming increasingly distributed with ongoing paradigm shift from people-centric to machine-oriented communications, making the operation of future wireless networks even more complex. In mitigating the complexity of future network operation, new approaches of intelligently utilizing distributed computational resources with improved context-awareness becomes extremely important. In this regard, the emerging fog (edge) computing architecture aiming to distribute computing, storage, control, communication, and networking functions closer to end users, have a great potential for enabling efficient operation of future wireless networks. These promising architectures make the adoption of artificial intelligence (AI) principles which incorporate learning, reasoning and decision-making mechanism, as natural choices for designing a tightly integrated network. Towards this end, this article provides a comprehensive survey on the utilization of AI integrating machine learning, data analytics and natural language processing (NLP) techniques for enhancing the efficiency of wireless network operation. In particular, we provide comprehensive discussion on the utilization of these techniques for efficient data acquisition, knowledge discovery, network planning, operation and management of the next generation wireless networks. A brief case study utilizing the AI techniques for this network has also been provided.

cs.IT↗

arXiv2017

Pilot Contamination for Wideband Massive MMO: Number of cells Vs Multipath

This paper proposes a novel joint channel estimation and beamforming approach for multicell wideband massive multiple input multiple output (MIMO) systems. With the proposed channel estimation and beamforming approach, we determine the number of cells $N_c$ that can utilize the same time and frequency resource while mitigating the effect of pilot contamination. The proposed approach exploits the multipath characteristics of wideband channels. Specifically, when the channel has a maximum of $L$ multipath taps, \textcolor{red}{it is shown that $N_c\leq L$ cells can estimate the channels of their user equipments (UEs) and perform beamforming while mitigating the effect of pilot contamination.} In a typical long term evolution (LTE) channel environment having delay spread $T_d=4.69μ$ second and channel bandwidth $B=2.5$MHz, we have found that $L=18$ cells can use this band. In practice, $T_d$ is constant for a particular environment and carrier frequency, and hence $L$ increases as the bandwidth increases. All the analytical expressions have been validated, and the superiority of the proposed design over the existing ones is demonstrated using extensive numerical simulations both for correlated and uncorrelated channels. The proposed channel estimation and beamforming design is linear and simple to implement.

cs.IT↗

arXiv2017

Multipath Multiplexing for Capacity Enhancement in SIMO Wireless Systems

This paper proposes a novel and simple orthogonal faster than Nyquist (OFTN) data transmission and detection approach for a single input multiple output (SIMO) system. It is assumed that the signal having a bandwidth $B$ is transmitted through a wireless channel with $L$ multipath components. Under this assumption, the current paper provides a novel and simple OFTN transmission and symbol-by-symbol detection approach that exploits the multiplexing gain obtained by the multipath characteristic of wideband wireless channels. It is shown that the proposed design can achieve a higher transmission rate than the existing one (i.e., orthogonal frequency division multiplexing (OFDM)). Furthermore, the achievable rate gap between the proposed approach and that of the OFDM increases as the number of receiver antennas increases for a fixed value of $L$. This implies that the performance gain of the proposed approach can be very significant for a large-scale multi-antenna wireless system. The superiority of the proposed approach is shown theoretically and confirmed via numerical simulations. {Specifically, we have found {upper-bound average} rates of 15 bps/Hz and 28 bps/Hz with the OFDM and proposed approaches, respectively, in a Rayleigh fading channel with 32 receive antennas and signal to noise ratio (SNR) of 15.3 dB. The extension of the proposed approach for different system setups and associated research problems is also discussed.

cs.IT↗

arXiv2017

Adaptive Channel Prediction, Beamforming and Scheduling Design for 5G V2I Network

One of the important use-cases of 5G network is the vehicle to infrastructure (V2I) communication which requires accurate understanding about its dynamic propagation environment. As 5G base stations (BSs) tend to have multiple antennas, they will likely employ beamforming to steer their radiation pattern to the desired vehicle equipment (VE). Furthermore, since most wireless standards employ an OFDM system, each VE may use one or more sub-carriers. To this end, this paper proposes a joint design of adaptive channel prediction, beamforming and scheduling for 5G V2I communications. The channel prediction algorithm is designed without the training signal and channel impulse response (CIR) model. In this regard, first we utilize the well known adaptive recursive least squares (RLS) technique for predicting the next block CIR from the past and current block received signals (a block may have one or more OFDM symbols). Then, we jointly design the beamforming and VE scheduling for each sub-carrier to maximize the uplink channel average sum rate by utilizing the predicted CIR. The beamforming problem is formulated as a Rayleigh quotient optimization where its global optimal solution is guaranteed. And, the VE scheduling design is formulated as an integer programming problem which is solved by employing a greedy search. The superiority of the proposed channel prediction and scheduling algorithms over those of the existing ones is demonstrated via numerical simulations.

cs.IT↗

arXiv2017

From D2D to Ds2D: Prolonging the Battery Life of Mobile Devices via Ds2D Communications

Emerging device centric systems (DCS) such as device-to-device (D2D) communications are considered as a standard part of future mobile networks, where operators/consumers involve the devices in direct communication to improve the cellular system throughput, latency, fairness, and energy efficiency. However, battery life of mobile devices involved in such communications is crucial for 5G smartphone users to explore the emerging applications in DCS. It is anticipated that the owners of 5G-enabled smartphones use their devices more extensively to talk, text, email, and surf the Web more often than do customers with 4G smartphones or traditional handsets, which puts a significantly higher demand on the battery life. Smartphones are currently equipped with multiple radio interfaces that enable them to access different types of wireless networks including LTE-direct and Wi-Fi-direct, besides cellular networks. Such a capability is not well explored within the context of DCS. This article proposes a new scheme to support the emerging features in DCS where a D2D-enabled mobile device (sink device or a file/content requester) aggregates the radio resources of multiple mobile devices (source devices or file/content providers) via its multiple radio interfaces such that the scheme is referred to as devices-to-device (Ds2D) communications. Ds2D communication scheme ensures an optimal packet split among the source mobile devices to improve the file/content transfer latency (FTL), energy efficiency, and battery life. Simulation results demonstrate that the proposed optimal packet split scheme among multiple source devices participating in Ds2D communication scheme guarantees an improvement in mobile battery life over wide range of data rate levels in comparison with the random packet split strategy and traditional D2D communication paradigm between the sink and source mobile devices.

cs.NI↗

arXiv2016

Intrusion Alert Prediction Using a Hidden Markov Model

Intrusion detection is only a starting step in securing IT infrastructure. Prediction of intrusions is the next step to provide an active defense against incoming attacks. Current intrusion prediction methods focus mainly on prediction of either intrusion type or intrusion category and do not use or provide contextual information such as source and target IP address. In addition most of them are dependant on domain knowledge and specific scenario knowledge. The proposed algorithm employs a bag-of-words model together with a hidden Markov model which not depend on specific domain knowledge. Since this algorithm depends on a training process it is adaptable to different conditions. A key advantage of the proposed algorithm is the inclusion of contextual data such as source IP address, destination IP range, alert type and alert category in its prediction, which is crucial for an eventual response. Experiments conducted using a public data set generated over 2500 alert predictions and achieved accuracy of 81% and 77% for single step and five step predictions respectively for prediction of the next alert cluster. It also achieved an accuracy of prediction of 95% and 92% for single step and five step predictions respectively for prediction of the next alert category. The proposed methods achieved a prediction accuracy improvement of 5% for alert category over existing variable length Markov chain intrusion prediction methods, while providing more information for a possible defense.

cs.CR↗

arXiv2016

Grant-free Rateless Multiple Access: A Novel Massive Access Scheme for Internet of Things

Rateless Multiple Access (RMA) is a novel non-orthogonal multiple access framework that is promising for massive access in Internet of Things (IoT) due to its high efficiency and low complexity. In the framework, after certain \emph{registration}, each active user respectively transmits to the access point (AP) randomly based on an assigned random access control function (RACf) until receiving an acknowledgement (ACK). In this work, by exploiting the intrinsic access pattern of each user, we propose a grant-free RMA scheme, which no longer needs the registration process as in the original RMA, thus greatly reduces the signalling overhead and system latency. Furthermore, we propose a low-complexity joint iterative detection and decoding algorithm in which the channel estimation, active user detection, and information decoding are done simultaneously. Finally, we propose a method based on density evolution (DE) to evaluate the system performance.

cs.IT↗

arXiv2016

A Survey on Wireless Security: Technical Challenges, Recent Advances and Future Trends

This paper examines the security vulnerabilities and threats imposed by the inherent open nature of wireless communications and to devise efficient defense mechanisms for improving the wireless network security. We first summarize the security requirements of wireless networks, including their authenticity, confidentiality, integrity and availability issues. Next, a comprehensive overview of security attacks encountered in wireless networks is presented in view of the network protocol architecture, where the potential security threats are discussed at each protocol layer. We also provide a survey of the existing security protocols and algorithms that are adopted in the existing wireless network standards, such as the Bluetooth, Wi-Fi, WiMAX, and the long-term evolution (LTE) systems. Then, we discuss the state-of-the-art in physical-layer security, which is an emerging technique of securing the open communications environment against eavesdropping attacks at the physical layer. We also introduce the family of various jamming attacks and their counter-measures, including the constant jammer, intermittent jammer, reactive jammer, adaptive jammer and intelligent jammer. Additionally, we discuss the integration of physical-layer security into existing authentication and cryptography mechanisms for further securing wireless networks. Finally, some technical challenges which remain unresolved at the time of writing are summarized and the future trends in wireless security are discussed.

cs.IT↗