arXiv subjects

Xianghao Yu

Publications and source records attributed to Xianghao Yu.

At least 37 records · Page 2Linked to original sources

arXiv2026

Optimal Movable Antenna Placement for Near-Field Wireless Sensing

Movable antennas (MAs) have emerged as a promising technology for wireless sensing by reconfiguring antenna positions to exploit additional spatial degrees of freedom (DoFs). This paper investigates a robust movable antenna placement strategy for near-field wireless sensing to minimize the worst-case squared position error bound (SPEB). By temporarily relaxing the minimum inter-element spacing constraint, we first establish the optimality of centro-symmetric antenna position distribution, which simplifies the identification of the worst-case source, locating it at the array broadside on the Rayleigh boundary. Moreover, by leveraging moment-based analysis with the Richter-Tchakaloff theorem, we derive a closed-form optimal solution with three points supported on the center and two edges of the array. Guided by this structural insight, we finally develop an efficient three-point discrete deployment strategy to ensure the minimum inter-element spacing. Simulations demonstrate that the proposed design consistently outperforms conventional fixed antenna arrays and matches the exhaustive search benchmark at negligible computational complexity.

eess.SP↗

arXiv2026

MIMO Beam Map Reconstruction via Toeplitz-Structured Matrix-Vector Tensor Decomposition

As wireless networks progress toward sixthgeneration (6G), understanding the spatial distribution of directional beam coverage becomes increasingly important for beam management and link optimization. Multiple-input multipleoutput (MIMO) beam map provides such spatial awareness, yet accurate construction under sparse measurements remains difficult due to incomplete spatial coverage and strong angular variations. This paper presents a tensor decomposition approach for reconstructing MIMO beam map from limited measurements. By transforming measurements from a Cartesian coordinate system into a polar coordinate system, we uncover a matrix-vector outer-product structure associated with different propagation conditions. Specifically, we mathematically demonstrate that the matrix factor, representing beam-space gain, exhibits an intrinsic Toeplitz structure due to the shift-invariant nature of array responses, and the vector factor captures distance-dependent attenuation. Leveraging these structural priors, we formulate a regularized tensor decomposition problem to jointly reconstruct line-of-sight (LOS), reflection, and obstruction propagation conditions. Simulation results confirm that the proposed method significantly enhances data efficiency, achieving a normalized mean square error (NMSE) reduction of over 20% compared to state-of-the-art baselines, even under sparse sampling regimes.

eess.SP↗

arXiv2025

Near-Field Communication with Massive Movable Antennas: An Electrostatic Equilibrium Perspective

Recent advancements in large-scale position-reconfigurable antennas have opened up new dimensions to effectively utilize the spatial degrees of freedom (DoFs) of wireless channels. However, the deployment of existing antenna placement schemes is primarily hindered by their limited scalability and frequently overlooked near-field effects in large-scale antenna systems. In this paper, we propose a novel antenna placement approach tailored for near-field massive multiple-input multiple-output systems, which effectively exploits the spatial DoFs to enhance spectral efficiency. For that purpose, we first reformulate the antenna placement problem in the angular domain, resulting in a weighted Fekete problem. We then derive the optimality condition and reveal that the {optimal} antenna placement is in principle an electrostatic equilibrium problem. To further reduce the computational complexity of numerical optimization, we propose an ordinary differential equation (ODE)-based framework to efficiently solve the equilibrium problem. In particular, the optimal antenna positions are characterized by the roots of the polynomial solutions to specific ODEs in the normalized angular domain. By simply adopting a two-step eigenvalue decomposition (EVD) approach, the optimal antenna positions can be efficiently obtained. Furthermore, we perform an asymptotic analysis when the antenna size tends to infinity, which yields a closed-form solution. Simulation results demonstrate that the proposed scheme efficiently harnesses the spatial DoFs of near-field channels with prominent gains in spectral efficiency and maintains robustness against system parameter mismatches. In addition, the derived asymptotic closed-form {solution} closely approaches the theoretical optimum across a wide range of practical scenarios.

cs.IT↗

arXiv2025

VoxelRF: Voxelized Radiance Field for Fast Wireless Channel Modeling

Wireless channel modeling in complex environments is crucial for wireless communication system design and deployment. Traditional channel modeling approaches face challenges in balancing accuracy, efficiency, and scalability, while recent neural approaches such as neural radiance field (NeRF) suffer from long training and slow inference. To tackle these challenges, we propose voxelized radiance field (VoxelRF), a novel neural representation for wireless channel modeling that enables fast and accurate synthesis of spatial spectra. VoxelRF replaces the costly multilayer perception (MLP) used in NeRF-based methods with trilinear interpolation of voxel grid-based representation, and two shallow MLPs to model both propagation and transmitter-dependent effects. To further accelerate training and improve generalization, we introduce progressive learning, empty space skipping, and an additional background entropy loss function. Experimental results demonstrate that VoxelRF achieves competitive accuracy with significantly reduced computation and limited training data, making it more practical for real-time and resource-constrained wireless applications.

eess.SP↗

arXiv2025

Detection in Bistatic ISAC with Deterministic Sensing and Gaussian Information Signals

Integrated sensing and communications (ISAC) is a disruptive technology enabling future sixth-generation (6G) networks. This paper investigates target detection in a bistatic ISAC system, in which the base station (BS) transmits superimposed ISAC signals comprising both Gaussian information-bearing and deterministic sensing components to simultaneously provide communication and sensing functionalities. First, we develop a Neyman-Pearson (NP)-based detector that effectively utilizes both the deterministic sensing and random communication signals. Closed-form analysis reveals that both signal components contribute to improving the overall detection performance. Subsequently, we optimize the BS transmit beamforming to maximize the detection probability, subject to a minimum signal-to-interference-plus-noise ratio (SINR) constraint for the communication user (CU) and a total transmit power budget at the BS. The resulting non-convex beamforming optimization problem is addressed via semi-definite relaxation (SDR) and successive convex approximation (SCA) techniques. Simulation results demonstrate the superiority of the proposed NP-based detector, which leverages both types of signals, over benchmark schemes that treat information signals as interference. They also reveal that a higher communication-rate threshold directs more transmit power to Gaussian information-bearing signals, thereby diminishing deterministic-signal power and weakening detection performance.

eess.SP↗

arXiv2025

Structure-Aware Near-Field Radio Map Recovery via RBF-Assisted Matrix Completion

This paper proposes a novel structure-aware matrix completion framework assisted by radial basis function (RBF) interpolation for near-field radio map construction in extremely large multiple-input multiple-output (XL-MIMO) systems. Unlike the far-field scenario, near-field wavefronts exhibit strong dependencies on both angle and distance due to spherical wave propagation, leading to complicated variations in received signal strength (RSS). To effectively capture the intricate spatial variations structure inherent in near-field environments, a regularized RBF interpolation method is developed to enhance radio map reconstruction accuracy. Leveraging theoretical insights from interpolation error analysis of RBF, an inverse μ-law-inspired nonuniform sampling strategy is introduced to allocate measurements adaptively, emphasizing regions with rapid RSS variations near the transmitter. To further exploit the global low-rank structure in the near-field radio map, we integrate RBF interpolation with nuclear norm minimization (NNM)-based matrix completion. A robust Huberized leave-one-out cross-validation (LOOCV) scheme is then proposed for adaptive selection of the tolerance parameter, facilitating optimal fusion between RBF interpolation and matrix completion. The integration of local variation structure modeling via RBF interpolation and global low-rank structure exploitation via matrix completion yields a structure-aware framework that substantially improves the accuracy of near-field radio map reconstruction. Extensive simulations demonstrate that the proposed approach achieves over 10% improvement in normalized mean squared error (NMSE) compared to standard interpolation and matrix completion methods under varying sampling densities and shadowing conditions.

eess.SP↗

arXiv2025

Flow Matching-Based Active Learning for Radio Map Construction with Low-Altitude UAVs

The employment of unmanned aerial vehicles (UAVs) in the lowaltitude economy necessitates precise and real-time radio maps for reliable communication and safe navigation. However, constructing such maps is hindered by the infeasibility of exhaustive measurements due to UAVs' limited flight endurance. To address this, we propose a novel active learning framework for low-altitude radio map construction based on limited measurements. First, a Plug-and-Play (PnP)-refined flow matching algorithm is introduced, which leverages flow matching as a powerful generative prior within a PnP scheme to reconstruct high-fidelity radio maps. Second, the generative nature of flow matching is exploited to quantify uncertainty by generating an ensemble of radio maps and computing the location-wise variance. The resulting uncertainty map guides a multi-objective candidate selection and then a trajectory is planned via utility-aware path search (UAPS), directing the UAV to the most informative locations while taking travel costs into account. Simulation results demonstrate that our method significantly outperforms the baselines, achieving more than a 70% reduction in normalized mean squared error (NMSE).

eess.SP↗

arXiv2025

Integrated photonic ultrawideband real-time spectrum sensing for 6G wireless networks

The sixth generation (6G) wireless networks require dynamic spectrum management to optimize the utilization of scarce spectral resources and support emerging integrated sensing and communication (ISAC) applications. This necessitates real-time spectrum sensing (RT-SS) capability with ultrawide measurement range, compact size, and low latency. Conventional electronic RT-SS solutions face critical challenges in operating across the millimeter-wave and sub-terahertz bands, which are essential spectra for 6G wireless. While photonic RT-SS has the potential to surpass this limitation, the current implementations feature limited bandwidths below 50 GHz and mostly rely on bulky dispersive fibers with high latency. Here, we address these challenges by developing an integrated photonic RT-SS system capable of ultrabroadband measurement from microwave to sub-terahertz bands, covering the full spectrum for 6G wireless. The photonic RT-SS circuit integrates a broadband electro-optic (EO) modulator for unknown signal loading, an EO tunable microring filter bank for high-speed parallel frequency-to-time mapping, as well as an EO comb for precise channel frequency referencing, all realized on a single thin-film lithium niobate chip. We achieve an unprecedented spectral measurement range beyond 120 GHz at a low latency of less than 100 ns. To validate the effectiveness of our photonic RT-SS system in future 6G scenes, we further propose a heuristic spectro-temporal resource allocation algorithm and conduct a proof-of-concept ISAC demonstration, where a radar adaptively access RT-SS-informed spectrally underutilized regions for high-quality target sensing under dynamic communication interferences. Our work presents a compact and cost-effective solution for efficient spectrum sharing and dynamic management in future 6G ISAC networks.

physics.optics↗

arXiv2025

Near-Field Communication with Massive Movable Antennas: A Functional Perspective

The advent of massive multiple-input multiple-output (MIMO) technology has provided new opportunities for capacity improvement via strategic antenna deployment, especially when the near-field effect is pronounced due to antenna proliferation. In this paper, we investigate the optimal antenna placement for maximizing the achievable rate of a point-to-point near-field channel, where the transmitter is deployed with massive movable antennas. First, we propose a novel design framework to explore the relationship between antenna positions and achievable data rate. By introducing the continuous antenna position function (APF) and antenna density function (ADF), we reformulate the antenna position design problem from the discrete to the continuous domain, which maximizes the achievable rate functional with respect to ADF. Leveraging functional analysis and variational methods, we derive the optimal ADF condition and propose a gradient-based algorithm for numerical solutions under general channel conditions. Furthermore, for the near-field line-of-sight (LoS) scenario, we present a closed-form solution for the optimal ADF, revealing the critical role of edge antenna density in enhancing the achievable rate. Finally, we propose a flexible antenna array-based deployment method that ensures practical implementation while mitigating mutual coupling issues. Simulation results demonstrate the effectiveness of the proposed framework, with uniform circular arrays emerging as a promising geometry for balancing performance and deployment feasibility in near-field communications.

cs.IT↗

arXiv2025

Active IRS-Enabled Integrated Sensing and Communications with Extended Targets

This paper studies the active intelligent reflecting surface (IRS)-enabled integrated sensing and communications (ISAC), in which an active IRS is deployed to assist the base station (BS) in serving multiple communication users (CUs) and simultaneously sensing an \emph{extended} target at the non-line-of-sight (NLoS) area of the BS. The active IRS has the capability of amplifying the reflected signals so as to overcome significant reflection path loss in NLoS communication and sensing. In particular, we derive the sensing Cramér-Rao bound (CRB) for estimating the target response matrix. Accordingly, we jointly optimize the transmit beamforming at the BS and the reflective beamforming at the active IRS to minimize the sensing CRB, subject to the signal-to-interference-plus-noise ratio (SINR) requirements at the CUs, the transmit power budgets at the BS and active IRS, as well as the power amplification gain constraints at the active IRS. The CRB minimization problem is highly non-convex and thus difficult to solve in general. To address this challenge, we first focus on two specified conditions by considering the sensing-only scenario via ignoring the SINR constraints for communications, for which the closed-form optimal transmit beamforming is derived. Then, we propose two efficient alternating optimization (AO)-based algorithms to obtain high-quality solutions for the general ISAC scenarios. Next, we analyze the inherent relationship between the power scaling at the BS and the amplification scaling at the active IRS. It is shown that the active IRS always amplifies the signal using the maximum amplification gain under practical system settings. Finally, numerical results are provided to verify the effectiveness of the proposed AO-based algorithms and the benefits of active IRS-enabled ISAC compared to its passive IRSs counterparts.

cs.IT↗

arXiv2025

CRB-Rate Tradeoff for Bistatic ISAC with Gaussian Information and Deterministic Sensing Signals

In this paper, we investigate a bistatic integrated sensing and communications (ISAC) system, consisting of a multi-antenna base station (BS), a multi-antenna sensing receiver, a single-antenna communication user (CU), and a point target to be sensed. Specifically, the BS transmits a superposition of Gaussian information and deterministic sensing signals. The BS aims to deliver information symbols to the CU, while the sensing receiver aims to estimate the target's direction-of-arrival (DoA) with respect to the sensing receiver by processing the echo signals. For the sensing receiver, we assume that only the sequences of the deterministic sensing signals and the covariance matrix of the information signals are perfectly known, whereas the specific realizations of the information signals remain unavailable. Under this setup, we first derive the corresponding Cramér-Rao bounds (CRBs) for DoA estimation and propose practical estimators to accurately estimate the target's DoA. Subsequently, we formulate the transmit beamforming design as an optimization problem aiming to minimize the CRB, subject to a minimum signal-to-interference-plus-noise ratio (SINR) requirement at the CU and a maximum transmit power constraint at the BS. When the BS employs only Gaussian information signals, the resulting beamforming optimization problem is convex, enabling the derivation of an optimal solution. In contrast, when both Gaussian information and deterministic sensing signals are transmitted, the resulting problem is non-convex and a locally optimal solution is acquired by exploiting successive convex approximation (SCA). Finally, numerical results demonstrate that employing Gaussian information signals leads to a notable performance degradation for target sensing and the proposed transmit beamforming design achieves a superior ISAC performance boundary compared with various benchmark schemes.

eess.SP↗

arXiv2025

Joint Radiation Power, Antenna Position, and Beamforming Optimization for Pinching-Antenna Systems with Motion Power Consumption

Pinching-antenna systems (PASS) have been recently proposed to improve the performance of wireless networks by reconfiguring both the large-scale and small-scale channel conditions. However, existing studies ignore the physical constraints of antenna placement and assume fixed antenna radiation power. To fill this research gap, this paper investigates the design of PASS taking into account the motion power consumption of pinching-antennas (PAs) and the impact of adjustable antenna radiation power. To that end, we minimize the average power consumption for a given quality-of-service (QoS) requirement, by jointly optimizing the antenna positions, antenna radiation power ratios, and transmit beamforming. To the best of the authors' knowledge, this is the first work to consider radiation power optimization in PASS, which provides an additional degree of freedom (DoF) for system design. The cases with both continuous and discrete antenna placement are considered, where the main challenge lies in the fact that the antenna positions affect both the magnitude and phase of the channel coefficients of PASS, making system optimization very challenging. To tackle the resulting unique obstacles, an alternating direction method of multipliers (ADMM)-based framework is proposed to solve the problem for continuous antenna movement, while its discrete counterpart is formulated as a mixed integer nonlinear programming (MINLP) problem and solved by the block coordinate descent (BCD) method. Simulation results validate the performance enhancement achieved by incorporating PA movement power assumption and adjustable radiation power into PASS design, while also demonstrating the efficiency of the proposed optimization framework. The benefits of PASS over conventional multiple-input multiple-output (MIMO) systems in mitigating the large-scale path loss and inter-user interference is also revealed.

eess.SP↗

arXiv2025

Exploiting Both Pilots and Data Payloads for Integrated Sensing and Communications

Integrated sensing and communications (ISAC) is one of the key enabling technologies in future sixth-generation (6G) networks. Current ISAC systems predominantly rely on deterministic pilot signals within the signal frame to accomplish sensing tasks. However, these pilot signals typically occupy only a small portion, e.g., 0.15% to 25%, of the time-frequency resources. To enhance the system utility, a promising solution is to repurpose the extensive random data payload signals for sensing tasks. In this paper, we analyze the ISAC performance of a multi-antenna system where both deterministic pilot and random data symbols are employed for sensing tasks. By capitalizing on random matrix theory (RMT), we first derive a semi-closed-form asymptotic expression of the ergodic linear minimum mean square error (ELMMSE). Then, we formulate an ISAC precoding optimization problem to minimize the ELMMSE, which is solved via a specifically tailored successive convex approximation (SAC) algorithm. To provide system insights, we further derive a closed-form expression for the asymptotic ELMMSE at high signal-to-noise ratios (SNRs). Our analysis reveals that, compared with conventional sensing implemented by deterministic signals, the sensing performance degradation induced by random signals is critically determined by the ratio of the transmit antenna size to the data symbol length. Based on this result, the ISAC precoding optimization problem at high SNRs is transformed into a convex optimization problem that can be efficiently solved. Simulation results validate the accuracy of the derived asymptotic expressions of ELMMSE and the performance of the proposed precoding schemes. Particularly, by leveraging data payload signals for sensing tasks, the sensing error is reduced by up to 5.6 dB compared to conventional pilot-based sensing.

eess.SP↗

arXiv2025

A Support Vector Approach in Segmented Regression for Map-assisted Non-cooperative Source Localization

This paper presents a non-cooperative source localization approach based on received signal strength (RSS) and 2D environment map, considering both line-of-sight (LOS) and non-line-of-sight (NLOS) conditions. Conventional localization methods, e.g., weighted centroid localization (WCL), may perform bad. This paper proposes a segmented regression approach using 2D maps to estimate source location and propagation environment jointly. By leveraging topological information from the 2D maps, a support vector-assisted algorithm is developed to solve the segmented regression problem, separate the LOS and NLOS measurements, and estimate the location of source. The proposed method demonstrates a good localization performance with an improvement of over 30% in localization rooted mean squared error (RMSE) compared to the baseline methods.

eess.SP↗

arXiv2025

Sensing-Enhanced Channel Estimation for Near-Field XL-MIMO Systems

Future sixth-generation (6G) systems are expected to leverage extremely large-scale multiple-input multiple-output (XL-MIMO) technology, which significantly expands the range of the near-field region. The spherical wavefront characteristics in the near field introduce additional degrees of freedom (DoFs), namely distance and angle, into the channel model, which leads to unique challenges in channel estimation (CE). In this paper, we propose a new sensing-enhanced uplink CE scheme for near-field XL-MIMO, which notably reduces the required quantity of baseband samples and the dictionary size. In particular, we first propose a sensing method that can be accomplished in a single time slot. It employs power sensors embedded within the antenna elements to measure the received power pattern rather than baseband samples. A time inversion algorithm is then proposed to precisely estimate the locations of users and scatterers, which offers a substantially lower computational complexity. Based on the estimated locations from sensing, a novel dictionary is then proposed by considering the eigen-problem based on the near-field transmission model, which facilitates efficient near-field CE with less baseband sampling and a more lightweight dictionary. Moreover, we derive the general form of the eigenvectors associated with the near-field channel matrix, revealing their noteworthy connection to the discrete prolate spheroidal sequence (DPSS). Simulation results unveil that the proposed time inversion algorithm achieves accurate localization with power measurements only, and remarkably outperforms various widely-adopted algorithms in terms of computational complexity. Furthermore, the proposed eigen-dictionary considerably improves the accuracy in CE with a compact dictionary size and a drastic reduction in baseband samples by up to 66%.

cs.IT↗

arXiv2025

Millimeter-Wave Energy-Efficient Hybrid Beamforming Architecture and Algorithm

This paper studies energy-efficient hybrid beamforming architectures and its algorithm design in millimeter-wave communication systems, aiming to address the challenges faced by existing hybrid beamforming due to low hardware flexibility and high power consumption. To solve the problems of existing hybrid beamforming, a novel energy-efficient hybrid beamforming architecture is proposed, where radio-frequency (RF) switch networks are introduced at the front and rear ends of the phase shifter network, enabling dynamic connections between the RF chains and the phase shifter array as well as the antenna array. The system model of the proposed architecture is established, including digital precoding and analog precoding processes, and the practical hardware limitations such as quantization errors of the digital-to-analog converter (DAC) and phase shifter resolution. In order to maximize the energy efficiency, this paper derives an energy efficiency model including spectral efficiency and system power consumption, and a hybrid precoding algorithm is proposed based on block coordinate descent to iteratively optimize the digital precoding matrix, analog precoding matrix, and DAC resolution. Simulation results under the NYUSIM-generated millimeter-wave channels show that the proposed hybrid beamforming architecture and precoding algorithm have higher energy efficiency than existing representative architectures and precoding algorithms under complete and partial channel state information, while the loss of spectral efficiency compared to fully connected architecture is less than 20%

eess.SP↗

arXiv2025

Integrated Sensing and Communications for Low-Altitude Economy: A Deep Reinforcement Learning Approach

This paper studies an integrated sensing and communications (ISAC) system for low-altitude economy (LAE), where a ground base station (GBS) provides communication and navigation services for authorized unmanned aerial vehicles (UAVs), while sensing the low-altitude airspace to monitor the unauthorized mobile target. The expected communication sum-rate over a given flight period is maximized by jointly optimizing the beamforming at the GBS and UAVs' trajectories, subject to the constraints on the average signal-to-noise ratio requirement for sensing, the flight mission and collision avoidance of UAVs, as well as the maximum transmit power at the GBS. Typically, this is a sequential decision-making problem with the given flight mission. Thus, we transform it to a specific Markov decision process (MDP) model called episode task. Based on this modeling, we propose a novel LAE-oriented ISAC scheme, referred to as Deep LAE-ISAC (DeepLSC), by leveraging the deep reinforcement learning (DRL) technique. In DeepLSC, a reward function and a new action selection policy termed constrained noise-exploration policy are judiciously designed to fulfill various constraints. To enable efficient learning in episode tasks, we develop a hierarchical experience replay mechanism, where the gist is to employ all experiences generated within each episode to jointly train the neural network. Besides, to enhance the convergence speed of DeepLSC, a symmetric experience augmentation mechanism, which simultaneously permutes the indexes of all variables to enrich available experience sets, is proposed. Simulation results demonstrate that compared with benchmarks, DeepLSC yields a higher sum-rate while meeting the preset constraints, achieves faster convergence, and is more robust against different settings.

cs.NI↗

arXiv2024

Digital Twin Enhanced Deep Reinforcement Learning for Intelligent Omni-Surface Configurations in MU-MIMO Systems

Intelligent omni-surface (IOS) is a promising technique to enhance the capacity of wireless networks, by reflecting and refracting the incident signal simultaneously. Traditional IOS configuration schemes, relying on all sub-channels' channel state information and user equipments' mobility, are difficult to implement in complex realistic systems. Existing works attempt to address this issue employing deep reinforcement learning (DRL), but this method requires a lot of trial-and-error interactions with the external environment for efficient results and thus cannot satisfy the real-time decision-making. To enable model-free and real-time IOS control, this paper puts forth a new framework that integrates DRL and digital twins. DeepIOS, a DRL based IOS configuration scheme with the goal of maximizing the sum data rate, is first developed to jointly optimize the phase-shift and amplitude of IOS in multi-user multiple-input-multiple-output systems. Thereafter, to further reduce the computational complexity, DeepIOS introduces an action branch architecture, which separately decides two optimization variables in parallel. Finally, a digital twin module is constructed through supervised learning as a pre-verification platform for DeepIOS, such that the decision-making's real-time can be guaranteed. The formulated framework is a closed-loop system, in which the physical space provides data to establish and calibrate the digital space, while the digital space generates experience samples for DeepIOS training and sends the trained parameters to the IOS controller for configurations. Numerical results show that compared with random and MAB schemes, the proposed framework attains a higher data rate and is more robust to different settings. Furthermore, the action branch architecture reduces DeepIOS's computational complexity, and the digital twin module improves the convergence speed and run-time.

cs.NI↗