arXiv subjects

Xiangming Sun

Publications and source records attributed to Xiangming Sun.

At least 19 recordsLinked to original sources

arXiv2026

Low-energy Muon-Nucleon scattering experiment: LUNE (White Paper)

The HIAF will provide high-intensity, high-quality muon beams with momenta from 0.5 to 7.5 GeV/c. This energy range is uniquely suited for precision muon scattering, bridging the gap between low-energy electron facilities and future high-energy lepton-ion colliders. In particular, HIAF will enable precision measurements with both positive and negative muon beams over a broad kinematic range, complementing existing electron-scattering facilities such as JLab, EicC and EIC. Based on HIAF muon source, the LUNE Collaboration has been established to address several fundamental questions in nuclear and particle physics, including the proton charge radius puzzle, nucleon electromagnetic structure, and the dynamics of quantum electrodynamics and hadronic interactions. The program proceeds in two phases, from elastic scattering to nucleon structure and beyond-Standard-Model searches. The experiment is expected to determine the proton charge radius with a precision of approximately 1.0\% using elastic muon-proton scattering. It will also perform systematic measurements of the proton electromagnetic form factors with both $\mu^+$ and $\mu^-$ beams, enabling precise studies of two-photon exchange effects and stringent tests of quantum electrodynamics. Beyond elastic scattering, LUNE will investigate TMD, gravitational form factors, and nuclear charge radii, providing new insights into the 3D structure of nucleons and nuclei. The experiment will further address important topics including Coulomb-distortion corrections, nuclear medium effects, and possible signatures of physics beyond the Standard Model. This white paper presents the scientific motivation, detector concept, expected performance, and long-term strategy of LUNE.

hep-ex↗

arXiv2026

A CubeSat Electronics System for Dual-Satellite Coordinated Soft X-Ray Polarimetry

Addressing the unique requirements for a wide field of view and rapid response in soft X-ray polarization measurements of transient sources such as gamma-ray bursts, this paper proposes the design of a high-reliability CubeSat payload electronics system for dual-satellite cooperative observation. The system employs a Gas Microchannel Pixel Detector (GMPD) and a Topmetal-L sensor as its core components, forming a highly integrated, low-noise payload hardware platform. It achieves a field of view of 90$^\circ$ $\times$ 90$^\circ$, a sensitive area of 3.69 cm$^{2}$, and a power consumption of less than 6 W, operating within an energy range of 2--10 keV. The system incorporates autonomous high-voltage (HV) ramp-up/ramp-down control and a dual-protection mechanism based on count rate and discharge events, enabling in-orbit responses to risks such as the South Atlantic Anomaly and solar particle events. It also supports single-event upset detection and recovery, as well as in-orbit firmware upgrades. The communication interface adopts a redundant primary/backup Controller Area Network (CAN) bus design, with measured channel switching times of less than 100 ms, meeting the demands for real-time command interaction in dual-satellite coordination. By utilizing a large-array pixel sensor with region-of-interest readout and integrating an in-orbit track compression algorithm, the system significantly reduces data storage and downlink transmission resource burdens. Ground tests demonstrate an equivalent noise charge of 22.35 e$^{-}$, HV monitoring linearity better than $\pm$0.5\%, and an output range extending to -5 kV. Thermal vacuum cycling tests show no performance degradation after five cycles between -5 $^\circ$C and 40 $^\circ$C. This work demonstrates the system's capability for autonomous observation, intelligent coordination, and reliable operation in complex space environments.

physics.ins-det↗

arXiv2026

Structured generalized sliced Wasserstein distance for keV X-ray polarization analysis with Gas Pixel Detector

Because of the special angular distribution of excited electrons by the photoelectric effect, the Gas Pixel Detector (GPD) is effective in measuring keV X-ray polarization of astrophysical events (e.g. gamma-ray bursts), by capturing ionization tracks of excited electrons as polarized images. Traditionally, the emission angles of photoelectrons are extracted from polarized images first, and statistics are then performed on these angles to infer the polarization direction and intensity. However, observation with the wide field of view requires the incident angle of X-rays not directly attainable through the traditional analysis process. In this paper, we propose using the generalized sliced Wasserstein (GSW) distance, projected by neural networks with random weights, as a completely data-driven approach to analyze X-ray polarization based on two-dimensional polarized images. We find the structures of the randomized neural networks matter when focusing on different aspects of the polarized images, and take advantage of the discrimination abilities by different neural network structures. The proposed method, named the structured GSW distance, successfully distinguishes polarized images with different configurations of incident angles and polarization directions. Furthermore, we build a simplified statistical model based on the von Mises distribution and the circular Wasserstein distance and compare the model against the proposed method, showing their high consistency. The computational method reported in this paper may benefit GPD-based polarimetry in astroparticle experiments and also pattern analysis on raw data from pixel detectors.

physics.data-an↗

arXiv2025

Simulation of radiation environment for the beam monitor of CEE experiment

The cooling storage ring external-target experiment is a large-scale nuclear physics experiment, which aims to study the physics of heavy-ion collisions at low temperatures and high baryon densities. A beam monitor (BM) is placed in the beam line to monitor the beam status and to improve the reconstruction resolution of the primary vertices. The radiation dose and particle fluence stemming from the beam interactions with gases and detector materials affect the performance of the sensors and electronics of BM. This paper uses FLUKA Monte Carlo code to simulate the radiation environment of BM detector. Radiation quantities including the total ionizing dose, 1 MeV neutron equivalent fluence, high-energy hadron flux, thermal neutron flux, and nuclear fragment flux are presented. Results of alternative simulation setups, including adding shielding layers inside the BM, are also investigated.

physics.ins-det↗

arXiv2025

Design and performance of the prototype gaseous beam monitor with GEM and pixel sensors for the CSR external-target experiment

A gaseous beam monitor utilizing gas electron multiplier (GEM) and pixel sensors is being developed for the Cooling Storage Ring (CSR) External-target Experiment (CEE) at Heavy Ion Research Facility in Lanzhou (HIRFL). The beam monitor is mainly used to track each beam particle, providing an accurate reconstruction of the primary vertex of the collision. Two generations of the pixel sensors (named Topmetal-CEE) were produced, with the second generation's performance improving over the first one. The design and performance of the prototype are described in the paper. Characterization of the prototype with heavy-ion beams and laser beams are presented, showing a spatial resolution better than 50 $\mum$ and a time resolution better than 15 ns.

physics.ins-det↗

arXiv2025

Development of a simulation and analysis framework for N{\nu}DEx experiment

N$\nu$DEx aims to search for the neutrinoless double beta decay in $^{82}$Se using a high pressure $^{82}$SeF$_6$ gas time projection chamber (TPC). This paper presents a simulation and analysis framework developed specifically for the N$\nu$DEx experiment. Using density functional theory and two-temperature theory, the reduced mobilities of SeF$_5^-$ and SeF$_6^-$ ions in SeF$_6$ were calculated, yielding values of 0.444 and 0.430 $\mathrm{cm^2V^{-1}s^{-1}}$ respectively, with an estimated uncertainty within 3\%. The TPC geometry, featuring a cathode, focusing plane, and anode structure, was modeled in COMSOL to compute electric fields. Signal and background events were generated using BxDecay0 and Geant4, while Garfield++ was employed to simulate charge transport and signal induction. Three-dimensional tracks were reconstructed from drift-time differences between the two assumed ion species using a breadth-first search algorithm. To demonstrate the framework's analytical capability, topological variables were taken from reconstructed tracks and used to define selection criteria. A boosted decision tree was then implemented to benchmark the signal-background separation. This simulation framework successfully validates the complete experimental workflow, serving as a robust tool for detector design and future sensitivity studies in the N$\nu$DEx experiment.

physics.ins-det↗

arXiv2025

The High Level Trigger and Express Data Production at STAR

To meet the demands of the Beam Energy Scan phase-II (BES-II) program, the STAR experiment at RHIC developed a dual real-time framework consisting of a High Level Trigger (HLT) and an Express Data Production system (xProduction). The HLT operates online within the Data Acquisition (DAQ) chain on a multicore CPU cluster, with optional acceleration using Xeon Phi coprocessors. It employs parallelized algorithms, such as the Cellular Automaton track finder, for fast tracking, vertexing, and event filtering, enabling real-time event selection and detector monitoring. In parallel, xProduction runs independently of the DAQ loop and performs near offline-quality calibration and reconstruction within hours. Using the express data stream, enhanced by HLT selections, and the STAR calibration framework, it enables early physics analysis and provides collaboration-wide access to analysis-ready datasets. Together, HLT and xProduction form a complementary system combining real-time selection with rapid high-quality reconstruction. This framework has enabled prompt reconstruction of the ${}^5_{\Lambda}\mathrm{He}$ hypernucleus and efficient processing of large datasets, demonstrating scalability for future high-luminosity experiments.

physics.ins-det↗

arXiv2025

Simulation of MAPS and a MAPS-based Inner Tracker for the Super Tau-Charm Facility

Monolithic Active Pixel Sensors (MAPS) are a promising detector candidate for the inner tracker of the Super Tau-Charm Facility (STCF). To evaluate the performance of MAPS and the MAPS-based inner tracker, a dedicated simulation workflow has been developed, offering essential insights for detector design and optimization. The intrinsic characteristics of MAPS, designed using several fabrication processes and pixel geometries, were investigated through a combination of Technology Computer Aided Design (TCAD) and Monte Carlo simulations. Simulations were conducted with both minimum ionizing particles and $^{55}$Fe X-rays to assess critical parameters such as detection efficiency, cluster size, spatial resolution, and charge collection efficiency. Based on these evaluations, a MAPS sensor featuring a strip-like pixel and a high-resistivity epitaxial layer is selected as the baseline sensor design for the STCF inner tracker due to its excellent performance. Using this optimized MAPS design, a three-layer MAPS-based inner tracker was modeled and simulated. The simulation demonstrated an average detection efficiency exceeding 99%, spatial resolutions of 44.8$\rm{\mu m}$ in the $z$ direction and 8.2$\rm{\mu m}$ in the $r-\phi$ direction, and an intrinsic sensor time resolution of 5.9ns for 1GeV/c $\mu^-$ particles originating from the interaction point. These promising results suggest that the MAPS-based inner tracker fulfills the performance requirements of the STCF experiment.

physics.ins-det↗

arXiv2025

A Low Power Monolithic Active Pixel Sensor Prototype for the STCF Inner Tracker

The Super Tau-Charm Facility (STCF) is a proposed $e^+e^-$ collider with a peak luminosity 100 times higher than that of the present tau-charm factory. The inner tracker (ITK) of STCF should feature a low material budget and high readout speed. Under these requirements, the monolithic active pixel sensor (MAPS) is considered as a promising candidate for the ITK. To minimize the power consumption of MAPS (for low material budget), larger-size sensors are proposed to reduce the scale of the readout circuitry while preserving the required position resolution. Multiple sensors with varying dimensions and structures were designed and integrated in several prototype chips for performance comparison, fabricated in a 180~nm CIS process. The in-pixel readout circuit can also provide time of arrival (ToA) and time-over-threshold (ToT) of the hit signal, with a least significant bit (LSB) of 50 ns. The peripheral readout circuit performs operations including timestamp correction, data aggregation, caching, framing, 8b/10b encoding, and serialization. According to simulation, the power consumption for a full-scale chip is about 55.7 mW/cm2. Preliminary measurements have been conducted on the prototype chips.

physics.ins-det↗

arXiv2025

Towards energy-insensitive and robust neutron/gamma classification: A learning-based frequency-domain parametric approach

Neutron/gamma discrimination has been intensively researched in recent years, due to its unique scientific value and widespread applications. With the advancement of detection materials and algorithms, nowadays we can achieve fairly good discrimination. However, further improvements rely on better utilization of detector raw signals, especially energy-independent pulse characteristics. We begin by discussing why figure-of-merit (FoM) is not a comprehensive criterion for high-precision neutron/gamma discriminators, and proposing a new evaluation method based on adversarial sampling. Inspired by frequency-domain analysis in existing literature, parametric linear/nonlinear models with minimum complexity are created, upon the discrete spectrum, with tunable parameters just as neural networks. We train the models on an open-source neutron/gamma dataset (CLYC crystals with silicon photomultipliers) preprocessed by charge normalization to discover and exploit energy-independent features. The performance is evaluated on different sampling rates and noise levels, in comparison with the frequency classification index and conventional methods. The frequency-domain parametric models show higher accuracy and better adaptability to variations of data integrity than other discriminators. The proposed method is also promising for online inference on economical hardware and portable devices.

physics.ins-det↗

arXiv2025

A Comprehensive Monte Carlo Simulation Tool on Electron Transport in Noble Gases and Liquids

For the particle detectors based on noble gases or liquids, it is essential to understand the transport dynamic and the properties of the electrons. We report the development of a tool for electron transport in noble gases He, Ne, Ar, Kr, or Xe, and liquids Ar, Kr, or Xe. The simulation, implemented in C++ and MATLAB, is based on electron-atom collisions, including elastic scattering, excitation and ionization. We validate the program through assessing the electron's swarm parameters, specifically the drift velocity and the diffusion coefficient. For electron transport in liquids, two models are discussed and both are used for the construction of the Monte Carlo framework based on the Cohen Leker theory. The results demonstrate the effectiveness and accuracy of the simulation tool, which offers a valuable support for detector design and data analysis.

physics.ins-det↗

arXiv2024

Measurement of gas properties for the ion-TPC of N$\nu$DEx experiment

In the N$\nu$DEx collaboration, a high-pressure gas TPC is being developed to search for the neutrinoless double beta decay. The use of electronegative $\mathrm{^{82}SeF_{6}}$ gas mandates an ion-TPC. The reconstruction of $z$ coordinate is to be realized exploiting the feature of multiple species of charge carriers. As the initial stage of the development, we studied the properties of the $\mathrm{SF_{6}}$ gas, which is non-toxic and has similar molecular structure to $\mathrm{SeF_{6}}$. In the paper we present the measurement of drift velocities and mobilities of the majority and minority negative charge carriers found in $\mathrm{SF_{6}}$ at a pressure of 750 Torr, slightly higher than the local atmospheric pressure. The reduced fields range between 3.0 and 5.5 Td. It was performed using a laser beam to ionize the gas inside a small TPC, with a drift length of 3.7 cm. A customized charge sensitive amplifier was developed to read out the anode signals induced by the slowly drifting ions. The reconstruction of $z$ coordinate using the difference in the velocities of the two carriers was also demonstrated.

physics.ins-det↗

arXiv2024

Scintillation pulse characterization with spectrum-inspired temporal neural networks: case studies on particle detector signals

Particle detectors based on scintillators are widely used in high-energy physics and astroparticle physics experiments, nuclear medicine imaging, industrial and environmental detection, etc. Precisely extracting scintillation signal characteristics at the event level is important for these applications, not only in respect of understanding the scintillator itself, but also kinds and physical property of incident particles. Recent researches demonstrate data-driven neural networks surpass traditional statistical methods, especially when the analytical form of signals is hard to obtain, or noise is significant. However, most densely connected or convolution-based networks fail to fully exploit the spectral and temporal structure of scintillation signals, leaving large space for performance improvement. In this paper, we propose a network architecture specially tailored for scintillation pulse characterization based on previous works on time series analysis. The core insight is that, by directly applying Fast Fourier Transform on original signals and utilizing different frequency components, the proposed network architecture can serve as a lightweight and enhanced representation learning backbone. We prove our idea in two case studies: (a) simulation data generated with the setting of the LUX dark matter detector, and (b) experimental electrical signals with fast electronics to emulate scintillation variations for the NICA/MPD calorimeter. The proposed model achieves significantly better results than the reference model in literature and densely connected models and demonstrates higher cost-efficiency than conventional machine learning methods.

physics.ins-det↗

arXiv2024

Optical Data Transmission ASICs for the High-Luminosity LHC (HL-LHC) Experiments

We present the design and test results of two optical data transmission ASICs for the High-Luminosity LHC (HL-LHC) experiments. These ASICs include a two-channel serializer (LOCs2) and a single-channel Vertical Cavity Surface Emitting Laser (VCSEL) driver (LOCld1V2). Both ASICs are fabricated in a commercial 0.25-um Silicon-on-Sapphire (SoS) CMOS technology and operate at a data rate up to 8 Gbps per channel. The power consumption of LOCs2 and LOCld1V2 are 1.25 W and 0.27 W at 8-Gbps data rate, respectively. LOCld1V2 has been verified meeting the radiation-tolerance requirements for HL-LHC experiments.

physics.ins-det↗

arXiv2023

Label-free timing analysis of SiPM-based modularized detectors with physics-constrained deep learning

Pulse timing is an important topic in nuclear instrumentation, with far-reaching applications from high energy physics to radiation imaging. While high-speed analog-to-digital converters become more and more developed and accessible, their potential uses and merits in nuclear detector signal processing are still uncertain, partially due to associated timing algorithms which are not fully understood and utilized. In this paper, we propose a novel method based on deep learning for timing analysis of modularized detectors without explicit needs of labelling event data. By taking advantage of the intrinsic time correlations, a label-free loss function with a specially designed regularizer is formed to supervise the training of neural networks towards a meaningful and accurate mapping function. We mathematically demonstrate the existence of the optimal function desired by the method, and give a systematic algorithm for training and calibration of the model. The proposed method is validated on two experimental datasets based on silicon photomultipliers (SiPM) as main transducers. In the toy experiment, the neural network model achieves the single-channel time resolution of 8.8 ps and exhibits robustness against concept drift in the dataset. In the electromagnetic calorimeter experiment, several neural network models (FC, CNN and LSTM) are tested to show their conformance to the underlying physical constraint and to judge their performance against traditional methods. In total, the proposed method works well in either ideal or noisy experimental condition and recovers the time information from waveform samples successfully and precisely.

physics.ins-det↗

arXiv2022

CMOS based high-resolution dynamic X-ray imaging with inorganic perovskite

High-resolution dynamic X-ray detector is crucial for time-resolved digital radiography (DR) imaging and fast 3D medical computed tomography (CT) imaging. Recently, perovskites have become promising alternatives to conventional semi-conductor materials, e.g., Si, a-Se and CdTe, for direct X-ray detection. However, the feasibility of their combination with high-speed pixelated complementary metal-oxide-semiconductor (CMOS) arrays remains unknown. This work originally reports an innovative direct-conversion X-ray detector fabricated with 300 micrometer thick inorganic perovskite film printed on a tailored CMOS array. In-house measurements demonstrate that the CsPbBr3 film has excellent optoelectric properties of an electron mobility-lifetime product of 3.40x10$^{-5}$ cm$^2$ V$^{-1}$, and the X-ray detector exhibits high sensitivity of 9341uC Gy$_{\rm air}^{-1}$ cm$^{-2}$, and low detection limit of 588 nGy$_{\rm air}^{-1}$. This CMOS X-ray imaging detector achieves a high spatial resolution up to 5.5 lp/mm (close to the resolution limit of 6.0 lp/mm), and >300 frame per second (fps) readout speed. DR image of a resolution pattern phantom and a anesthesia mice, CT images of a biological specimen are acquired for the first time.

physics.app-ph↗

arXiv2022

Topmetal-M: a novel pixel sensor for compact tracking applications

The Topmetal-M is a large area pixel sensor (18 mm * 23 mm) prototype fabricated in a new 130 nm high-resistivity CMOS process in 2019. It contains 400 rows * 512 columns square pixels with the pitch of 40 {\mu}m. In Topmetal-M, a novel charge collection method combing the Monolithic Active Pixel Sensor (MAPS) and the Topmetal sensor has been proposed for the first time. Both the ionized charge deposited by the particle in the sensor and along the track over the sensor can be collected. The in-pixel circuit mainly consists of a low-noise charge sensitive amplifier to establish the signal for the energy reconstruction, and a discriminator with a Time-to-Amplitude Converter (TAC) for the Time of Arrival (TOA) measurement. With this mechanism, the trajectory, particle hit position, energy and arrival time of the particle can be measured. The analog signal from each pixel is accessible through time-shared multiplexing over the entire pixel array. This paper will discuss the design and preliminary test results of the Topmetal-M sensor.

physics.ins-det↗

arXiv2020

A Low-Power Time-to-Digital Converter for the CMS Endcap Timing Layer (ETL) Upgrade

We present the design and test results of a Time-to-Digital-Converter (TDC). The TDC will be a part of the readout ASIC, called ETROC, to read out Low-Gain Avalanche Detectors (LGADs) for the CMS Endcap Timing Layer (ETL) of High-Luminosity LHC upgrade. One of the challenges of the ETROC design is that the TDC is required to consume less than 200 W for each pixel at the nominal hit occupancy of 1%. To meet the low-power requirement, we use a single delay line for both the Time of Arrival (TOA) and the Time over Threshold (TOT) measurements without delay control. A double-strobe self-calibration scheme is used to compensate for process variation, temperature, and power supply voltage. The TDC is fabricated in a 65 nm CMOS technology. The overall performances of the TDC have been evaluated. The TOA has a bin size of 17.8 ps within its effective dynamic range of 11.6 ns. The effective measurement precision of the TOA is 5.6 ps and 9.9 ps with and without the nonlinearity correction, respectively. The TDC block consumes 97 W at the hit occupancy of 1%. Over a temperature range from 23 C to 78 C and a power supply voltage range from 1.05 V to 1.35 V (the nominal value of 1.20 V), the self-calibrated bin size of the TOA varies within 0.4%. The measured TDC performances meet the requirements except that more tests will be performed in the future to verify that the TDC complies with the radiation-tolerance specifications.

physics.ins-det↗