SearcharxivSearch

arXiv subjects

Xiaodai Dong

Publications and source records attributed to Xiaodai Dong.

At least 19 recordsLinked to original sources

CRFCAN: A Complex-Valued Cross-Domain Residual Network for Joint Channel and Phase Noise Estimation in Sub-THz OFDM Systems

In sub-terahertz (sub-THz) communications, the coupling of ultra-wide bandwidth and severe phase noise (PN) impairments renders conventional joint channel and PN estimation highly complex and computationally prohibitive. To address this, we propose CRFCAN, a complex-valued residual FFT convolutional attention network designed for joint channel and PN estimation. Unlike existing deep learning schemes that rely on cascaded networks or hybrid frameworks combining neural networks with conventional iterative estimators, CRFCAN performs joint recovery in a truly end-to-end fashion through a physics-inspired cross-domain structure. Specifically, Fast Fourier Transform (FFT) and inverse FFT modules are embedded within residual groups to enable iterative feature interaction across the time and frequency domains, thereby capturing both frequency-selective fading and time-varying phase distortions. In addition, two dedicated residual blocks are introduced for complex feature extraction and multiplicative phase-distortion modeling, respectively. A physics-aware PN output tail with soft normalization is further employed to improve estimation stability while preserving the physical characteristics of the effective PN process. Simulation results demonstrate that CRFCAN significantly outperforms conventional algorithms and state-of-the-art deep learning models in terms of normalized mean square error (NMSE) and bit error rate (BER). Notably, CRFCAN achieves superior performance with single-shot, fixed-complexity inference and generalizes well to unseen PN models without fine-tuning, highlighting its robustness and practicality for sub-THz receivers.

cs.LG

A CNN-LSTM Quantifier for Single Access Point CSI Indoor Localization

This paper proposes a combined network structure between convolutional neural network (CNN) and long-short term memory (LSTM) quantifier for WiFi fingerprinting indoor localization. In contrast to conventional methods that utilize only spatial data with classification models, our CNN-LSTM network extracts both space and time features of the received channel state information (CSI) from a single router. Furthermore, the proposed network builds a quantification model rather than a limited classification model as in most of the literature work, which enables the estimation of testing points that are not identical to the reference points. We analyze the instability of CSI and demonstrate a mitigation solution using a comprehensive filter and normalization scheme. The localization accuracy is investigated through extensive on-site experiments with several mobile devices including mobile phone (Nexus 5) and laptop (Intel 5300 NIC) on hundreds of testing locations. Using only a single WiFi router, our structure achieves an average localization error of 2.5~m with $\mathrm{80\%}$ of the errors under 4~m, which outperforms the other reported algorithms by approximately $\mathrm{50\%}$ under the same test environment.

cs.LG

Passive Indoor Localization with WiFi Fingerprints

This paper proposes passive WiFi indoor localization. Instead of using WiFi signals received by mobile devices as fingerprints, we use signals received by routers to locate the mobile carrier. Consequently, software installation on the mobile device is not required. To resolve the data insufficiency problem, flow control signals such as request to send (RTS) and clear to send (CTS) are utilized. In our model, received signal strength indicator (RSSI) and channel state information (CSI) are used as fingerprints for several algorithms, including deterministic, probabilistic and neural networks localization algorithms. We further investigated localization algorithms performance through extensive on-site experiments with various models of phones at hundreds of testing locations. We demonstrate that our passive scheme achieves an average localization error of 0.8 m when the phone is actively transmitting data frames and 1.5 m when it is not transmitting data frames.

eess.SP

Distributed Reconfigurable Intelligent Surfaces for Energy Efficient Indoor Terahertz Wireless Communications

With the fifth-generation (5G) networks widely commercialized and fast deployed, the sixth-generation (6G) wireless communication is envisioned to provide competitive quality of service (QoS) in multiple aspects to global users. The critical and underlying research of the 6G is, firstly, highly dependent on the precise modeling and characterization of the wireless propagation when the spectrum is believed to expand to the terahertz (THz) domain. Moreover, future networks' power consumption and energy efficiency are critical factors to consider. In this research, based on a review of the fundamental mechanisms of reconfigurable intelligent surface (RIS) assisted wireless communications, we utilize the 3D ray-tracing method to analyze a realistic indoor THz propagation environment with the existence of human blockers. Furthermore, we propose a distributed RISs framework (DRF) to assist the indoor THz wireless communication to achieve overall energy efficiency. The numerical analysis of simulation results based on more than 2,900 indoor THz wireless communication sub-scenarios has demonstrated the significant efficacy of applying distributed RISs to overcome the mobile human blockage issue, improve the THz signal coverage, increase signal-to-noise ratios (SNRs), and QoS. With practical hardware design constraints investigated, we eventually envision how to utilize the existing integrated sensing and communication techniques to deploy and operate such a system in reality. Such a distributed RISs framework can also lay the foundation of efficient THz communications for Internet-of-Things (IoT) networks.

eess.SP

Wi-Fi and Bluetooth Contact Tracing Without User Intervention

Previous contact tracing systems required the users to perform many manual actions, such as installing smartphone applications, joining wireless networks, or carrying custom user devices. This increases the barrier to entry and lowers the user adoption rate. As a result, the contact tracing effectiveness is reduced. Unlike the systems above, we propose a new privacy preserving Wi-Fi and Bluetooth (BLE) contact tracing system that does not require smartphone applications, joining wireless networks, or custom user devices. Our specially built routers seamlessly track smartphones, laptops, smartwatches, BLE headphones, and tablets without any user action, but do not trace user identity. Mapping between devices and users is only carried out for confirmed cases and suspected contacts. Moreover, we can track the absolute positions of user devices within 1.0 m due to using bidirectional long short-term memory neural networks that are trained with data pre-collected by an autonomous robot. This allows public health authorities to track indirect droplet and surface transmissions that other contact tracing systems often overlook.

eess.SP

Joint Time and Power Allocation for 5G NR Unlicensed Systems

The fifth-generation (5G) and beyond networks are designed to efficiently utilize the spectrum resources to meet various quality of service (QoS) requirements. The unlicensed frequency bands used by WiFi are mainly deployed for indoor applications and are not always fully occupied. The cellular industry has been working to enable cellular and WiFi coexistence. In particular, 5G New Radio in unlicensed channel spectrum (NR-U) supports the uplink and downlink transmission on the maximum channel occupation time (MCOT) duration. In this paper, we consider maximizing the total throughput of both downlink and uplink in NR-U by jointly optimizing the time and power allocation during MCOT while ensuring fair coexistence with WiFi. Fairness is guaranteed in two steps: 1) tuning the access related parameters of NR-U to achieve proportional fairness, and 2) including 3GPP fairness from the throughput perspective as a constraint in NR-U throughput maximization. Numerical analysis and simulation have demonstrated the superior performance of the proposed resource allocation algorithm compared to conventional deployment strategies.

eess.SP

Meteorologically Introduced Impacts on Aerial Channels and UAV Communications

As 5G wireless systems and networks are now being globally commercialized and deployed, more diversified application scenarios are emerging, quickly reshaping our societies and paving the road to the beyond 5G (6G) era when terahertz (THz) and unmanned aerial vehicle (UAV) communications may play critical roles. In this paper, aerial channel models under multiple meteorological conditions such as rain, fog and snow, have been investigated at frequencies of interest (from 2 GHz to 900 GHz) for UAV communications. Furthermore, the link budget and the received signal-to-noise ratio (SNR) performance under the existing air-to-ground (A2G) channel models are studied with antenna(s) system considered. The relationship between the 3D coverage radius and UAV altitude under the influence of multiple weather (MW) conditions is simulated. Numerical results show that medium rain has the most effects on the UAV's coverage for UAV communications at millimeter wave (mmWave) bands, while snow has the largest impacts at near THz bands. In addition, when the frequency increases, the corresponding increase in the number of antennas can effectively compensate for the propagation loss introduced by weather factors, while its form factor and weight can be kept to maintain the UAV's payload.

eess.SP

Pose-GNN : Camera Pose Estimation System Using Graph Neural Networks

We propose a novel image based localization system using graph neural networks (GNN). The pretrained ResNet50 convolutional neural network (CNN) architecture is used to extract the important features for each image. Following, the extracted features are input to GNN to find the pose of each image by either using the image features as a node in a graph and formulate the pose estimation problem as node pose regression or modelling the image features themselves as a graph and the problem becomes graph pose regression. We do an extensive comparison between the proposed two approaches and the state of the art single image localization methods and show that using GNN leads to enhanced performance for both indoor and outdoor environments.

cs.CV

Universal Activation Function For Machine Learning

This article proposes a Universal Activation Function (UAF) that achieves near optimal performance in quantification, classification, and reinforcement learning (RL) problems. For any given problem, the optimization algorithms are able to evolve the UAF to a suitable activation function by tuning the UAF's parameters. For the CIFAR-10 classification and VGG-8, the UAF converges to the Mish like activation function, which has near optimal performance $F_{1} = 0.9017\pm0.0040$ when compared to other activation functions. For the quantification of simulated 9-gas mixtures in 30 dB signal-to-noise ratio (SNR) environments, the UAF converges to the identity function, which has near optimal root mean square error of $0.4888 \pm 0.0032$ $μM$. In the BipedalWalker-v2 RL dataset, the UAF achieves the 250 reward in $961 \pm 193$ epochs, which proves that the UAF converges in the lowest number of epochs. Furthermore, the UAF converges to a new activation function in the BipedalWalker-v2 RL dataset.

cs.LG

Channel Estimation and Hybrid Precoding for Distributed Phased Arrays Based MIMO Wireless Communications

Distributed phased arrays based multiple-input multiple-output (DPA-MIMO) is a newly introduced architecture that enables both spatial multiplexing and beamforming while facilitating highly reconfigurable hardware implementation in millimeter-wave (mmWave) frequency bands. With a DPA-MIMO system, we focus on channel state information (CSI) acquisition and hybrid precoding. As benefited from a coordinated and open-loop pilot beam pattern design, all the sub-arrays can perform channel sounding with less training overhead compared with the traditional orthogonal operation of each sub-array. Furthermore, two sparse channel recovery algorithms, known as joint orthogonal matching pursuit (JOMP) and joint sparse Bayesian learning with $\ell_2$ reweighting (JSBL-$\ell_2$), are proposed to exploit the hidden structured sparsity in the beam-domain channel vector. Finally, successive interference cancellation (SIC) based hybrid precoding through sub-array grouping is illustrated for the DPA-MIMO system, which decomposes the joint sub-array RF beamformer design into an interactive per-sub-array-group handle. Simulation results show that the proposed two channel estimators fully take advantage of the partial coupling characteristic of DPA-MIMO channels to perform channel recovery, and the proposed hybrid precoding algorithm is suitable for such array-of-sub-arrays architecture with satisfactory performance and low complexity.

cs.IT

Deep Q-Network Based Dynamic Movement Strategy in a UAV-Assisted Network

Unmanned aerial vehicle (UAV)-assisted communications is a promising solution to improve the performance of future wireless networks, where UAVs are deployed as base stations for enhancing the quality of service (QoS) provided to ground users when traditional terrestrial base stations are unavailable or not sufficient. An effective framework is proposed in this paper to manage the dynamic movement of multiple unmanned aerial vehicles (UAVs) in response to ground user mobility, with the objective to maximize the sum data rate of the ground users. First, we discuss the relationship between the air-to-ground (A2G) path loss (PL) and the location of UAVs. Then a deep Q-network (DQN) based method is proposed to adjust the locations of UAVs to maximize the sum data rate of the user equipment (UE). Finally, simulation results show that the proposed method is capable of adjusting UAV locations in a real-time condition to improve the QoS of the entire network.

eess.SP

QoS-Compliant 3D Deployment Optimization Strategy for UAV Base Stations

Unmanned aerial vehicle (UAV) is being integrated as an active element in 5G and beyond networks. Because of its flexibility and mobility, UAV base stations (UAV-BSs) can be deployed according to the ground user distributions and their quality of service (QoS) requirement. Although there has been quite some prior research on the UAV deployment, no work has studied this problem in a 3 dimensional (3D) setting and taken into account the UAV-BS capacity limit and the quality of service (QoS) requirements of ground users. Therefore, in this paper, we focus on the problem of deploying UAV-BSs to provide satisfactory wireless communication services, with the aim to maximize the total number of covered user equipment (UE) subject to user data rate requirements and UAV-BSs' capacity limit. First, we model the relationship between the air-to-ground (A2G) path loss (PL) and the location of UAV-BSs in both horizontal and vertical dimensions which has not been considered in previous works. Unlike the conventional UAV deployment problem formulation, the 3D deployment problem is decoupled into a 2D horizontal placement and altitude determination connected by path loss requirement and minimization. Then, we propose a novel genetic algorithm (GA) based 2D placement approach in which UAV-BSs are placed to have maximum coverage of the users with consideration of data rate distribution. Finally, numerical and simulation results show that the proposed approach has enabled a better coverage percentage comparing with other schemes.

eess.SP

Multi-cell Edge Coverage Enhancement Using Mobile UAV-Relay

Unmanned aerial vehicle (UAV)-assisted communication is a promising technology in future wireless communication networks. UAVs can not only help offload data traffic from ground base stations (GBSs), but also improve the quality of service of cell-edge users (CEUs). In this paper, we consider the enhancement of cell-edge communications through a mobile relay, i.e., UAV, in multi-cell networks. During each transmission period, GBSs first send data to the UAV, and then the UAV forwards its received data to CEUs according to a certain association strategy. In order to maximize the sum rate of all CEUs, we jointly optimize the UAV mobility management, including trajectory, velocity, and acceleration, and association strategy of CEUs to the UAV, subject to minimum rate requirements of CEUs, mobility constraints of the UAV and causal buffer constraints in practice. To address the mixed-integer nonconvex problem, we transform it into two convex subproblems by applying tight bounds and relaxations. An iterative algorithm was proposed to solve the two subproblems in an alternating manner. Numerical results show that the proposed algorithm achieves higher rates of CEUs as compared with existing benchmark schemes.

cs.NI

Cellular Communications in Ocean Waves for Maritime Internet of Things

The rapid advancement of Internet of Things (IoT) and 5G and beyond technologies are transforming the marine industry and research. Our understanding of the vast sea that covers 71% of the Earth's surface is being enhanced by the various ocean sensor networks equipped with effective communications technologies. In this paper, we begin with a review of the research and development status-quo of maritime IoT (MIoT) enabled by multiple wireless communication technologies. Then we study the impact of sea waves to radio propagation and the communications link quality. Due to the severe attenuation of sea water to radio frequency electromagnetic waves propagation, large ocean waves can easily block the communications link between a buoy sensor and a cell tower near shore. This paper for the first time uses the ocean wave modeling of coastal and oceanic waters to examine the line of sight communications condition. Real wave measurement data parameters are applied in the numerical evaluation of the developed model. Finally, the critical antenna design taking into account the wave impact is numerically studied with implementation solutions proposed, and the system hardware and protocol aspects are discussed.

eess.SP

Semi-Sequential Probabilistic Model For Indoor Localization Enhancement

This paper proposes a semi-sequential probabilistic model (SSP) that applies an additional short term memory to enhance the performance of the probabilistic indoor localization. The conventional probabilistic methods normally treat the locations in the database indiscriminately. In contrast, SSP leverages the information of the previous position to determine the probable location since the user's speed in an indoor environment is bounded and locations near the previous one have higher probability than the other locations. Although the SSP utilizes the previous location information, it does not require the exact moving speed and direction of the user. On-site experiments using the received signal strength indicator (RSSI) and channel state information (CSI) fingerprints for localization demonstrate that SSP reduces the maximum error and boosts the performance of existing probabilistic approaches by 25% - 30%.

eess.SP

Recurrent Neural Networks For Accurate RSSI Indoor Localization

This paper proposes recurrent neuron networks (RNNs) for a fingerprinting indoor localization using WiFi. Instead of locating user's position one at a time as in the cases of conventional algorithms, our RNN solution aims at trajectory positioning and takes into account the relation among the received signal strength indicator (RSSI) measurements in a trajectory. Furthermore, a weighted average filter is proposed for both input RSSI data and sequential output locations to enhance the accuracy among the temporal fluctuations of RSSI. The results using different types of RNN including vanilla RNN, long short-term memory (LSTM), gated recurrent unit (GRU) and bidirectional LSTM (BiLSTM) are presented. On-site experiments demonstrate that the proposed structure achieves an average localization error of $0.75$ m with $80\%$ of the errors under $1$ m, which outperforms the conventional KNN algorithms and probabilistic algorithms by approximately $30\%$ under the same test environment.

eess.SP

Multi-Beam Multi-Stream Communications for 5G and Beyond Mobile User Equipment and UAV Proof of Concept Designs

Millimeter-wave (mmWave), massive multiple-input multiple-output (MIMO), are expected to play a crucial role for 5G and beyond cellular and next-generation wireless local area network (WLAN) communications. Moreover, unmanned aerial vehicles (UAVs) are also considered as an important component of next-generation networks. In this paper, we propose and present a mmWave distributed phased-arrays (DPA) architecture and proof-of-concept (PoC) designs for user equipment (UE) and unmanned aerial vehicles (UAVs) which will be used in 5G/Beyond 5G wireless communication networks. Through enabling a multi-stream multi-beam communication mode, the UE PoC achieves a peak downlink speed of more than 4 Gbps with optimized thermal distribution performance. Furthermore, based on the DPA topology, the UAV aerial base station (ABS) prototype is designed and demonstrates for the first time an aggregated peak downlink data rate of 2.2 Gbps in the real-world field tests supporting multi-user (MU) application scenarios.

eess.SP

A Soft Range Limited K-Nearest Neighbours Algorithm for Indoor Localization Enhancement

This paper proposes a soft range limited K nearest neighbours (SRL-KNN) localization fingerprinting algorithm. The conventional KNN determines the neighbours of a user by calculating and ranking the fingerprint distance measured at the unknown user location and the reference locations in the database. Different from that method, SRL-KNN scales the fingerprint distance by a range factor related to the physical distance between the user's previous position and the reference location in the database to reduce the spatial ambiguity in localization. Although utilizing the prior locations, SRL-KNN does not require knowledge of the exact moving speed and direction of the user. Moreover, to take into account of the temporal fluctuations of the received signal strength indicator (RSSI), RSSI histogram is incorporated into the distance calculation. Actual on-site experiments demonstrate that the new algorithm achieves an average localization error of $0.66$ m with $80\%$ of the errors under $0.89$ m, which outperforms conventional KNN algorithms by $45\%$ under the same test environment.

eess.SP