arXiv subjects

Xiaohu Ge

Publications and source records attributed to Xiaohu Ge.

At least 19 recordsLinked to original sources

arXiv2026

Transmit Pinching-Antenna Systems (T-PASS): Connecting Wired to Wireless Communications

A transmit pinching-antenna system (T-PASS) framework is proposed, in which a single pinched waveguide is employed to jointly serve one wired user equipment (UE) and multiple wireless UEs. The signal radiated by the pinching antennas (PAs) is used to serve the wireless UEs, whereas the residual guided signal at the waveguide termination is used to serve the wired UE. To facilitate T-PASS transmission and mitigate inter-user interference, a hybrid non-orthogonal multiple access (NOMA) scheme is introduced. Wireless UEs are scheduled by time-division multiple access (TDMA), and, in each slot, the scheduled wireless UE is paired with the wired UE through power-domain NOMA. Within this framework, the PA positions, PA radiation coefficients, power allocation, and TDMA time-slot allocation are jointly optimized to maximize a weighted sum rate (WSR). i) For the two-user case with one wired UE and one wireless UE, the optimal PA position and successive interference cancellation (SIC) decoding order are derived. Closed-form optimal power allocation is obtained, and a near-optimal PA radiation coefficient is determined through a low-complexity one-dimensional search. ii) For the multiuser case with one wired UE and multiple wireless UEs, four protocols with different PA-position and PA-radiation configurations are proposed. For each protocol, a low-complexity element-wise alternating optimization algorithm is developed to optimize the PA positions and radiation coefficients, while closed-form solutions are derived for the optimal power allocation and time-slot allocation. Numerical results are presented to show that: i) under typical T-PASS configurations, the wired UE is selected as the strong user in the optimal SIC decoding order; ii) the proposed T-PASS framework achieves a significantly higher WSR than conventional wireless-only PASS.

eess.SP↗

arXiv2026

Energy-Based Cell Association in Nonuniform Renewable Energy-Powered Cellular Networks: Analysis and Optimization of Carbon Efficiency

The increasing global push for carbon reduction highlights the importance of integrating renewable energy into the supply chain of cellular networks. However, due to the stochastic nature of renewable energy generation and the uneven load distribution across base stations, the utilization rate of renewable energy remains low. To address these challenges, this paper investigates the trade-off between carbon emissions and downlink throughput in cellular networks, offering insights into optimizing both network performance and sustainability. The renewable energy state of base station batteries and the number of occupied channels are modeled as a quasi-birth-death process. We construct models for the probability of channel blocking, average successful transmission probability for users, downlink throughput, carbon emissions, and carbon efficiency based on stochastic geometry. Based on these analyses, an energy-based cell association scheme is proposed to optimize the carbon efficiency of cellular networks. The results show that, compared to the closest cell association scheme, the energy-based cell association scheme is capable of reducing the carbon emissions of the network by 13.0% and improving the carbon efficiency by 11.3%.

eess.SP↗

arXiv2025

Revealing computation-communication trade-off in Segmented Pinching Antenna System (PASS)

A joint communication and computation (JCC) framework using segmented pinching antenna system (PASS) is proposed, where both the communication bit streams and computation data are simultaneously transmitted via uplink communications. The segmented PASS design is used to yield the tractable uplink transmission, and to mitigate large-scale path loss and in-waveguide loss. Based on three operating protocols, namely segment selection (SS), segment aggregation (SA), and segment multiplexing (SM), the joint transmit and receive beamforming problem is formulated: 1) The mean square error (MSE) minimization problem is formulated for computation-oriented cases. To address this problem, a low-complexity alternating optimization-minimum mean square error (AO-MMSE) algorithm is developed. This problem is decomposed into receiver-side and transmitter-side MSE subproblems that are iteratively optimized by MMSE receivers to obtain the closed-form solutions. It is mathematically proved that the segmented JCC-PASS framework significantly outperforms the conventional PASS for the average in-waveguide propagation gain. 2) The weighted sum rate (WSR) maximization problem is formulated for communication-oriented cases. To solve the decomposed receiver-side and transmitter-side MSE subproblems, the AO-weighted minimum mean square error (AO-WMMSE) algorithm is further developed. An auxiliary weight variable is introduced to linearize the WSR function and is alternatively optimized based on WMMSE to derive the closed-form solutions. Simulation results demonstrate that: i) The proposed JCC-PASS framework achieves up to 70.65% and 45.32% reductions in MSE compared with conventional MIMO and conventional PASS, and ii) it reaches 87.70% and 51.35% improvements in WSR compared with conventional MIMO and conventional PASS, respectively.

eess.SP↗

arXiv2025

Enabling Wireless Power Transfer (WPT) in Pinching Antenna Systems (PASS)

A novel pinching antenna system (PASS) enabled wireless power transfer (WPT) framework is proposed, where energy harvesting receivers (EHRs) and information decoding receivers (IDRs) coexist. By activating pinching antennas (PAs) near both receivers and flexibly adjusting PAs' power radiation ratios, both energy harvesting efficiency and communication quality can be enhanced. A bi-level optimization problem is formulated to overcome the strong coupling between optimization variables. The upper level jointly optimizes transmit beamforming, PA positions, and feasible interval of power radiation ratios for power conversion efficiency (PCE) maximization under rate requirements, while the lower level refines power radiation ratio for the sum rate maximization. Efficient solutions are developed for both two-user and multi-user scenarios. 1) For the two-user case, where an EHR and an IDR coexist, the alternating optimization (AO)-based and weighted minimum mean square error (WMMSE)-based algorithms are developed to achieve the stationary solutions of transmit beamforming, PA positions, and power radiation ratios. 2) For the multi-user case, a quadratic transform-Lagrangian dual transform (QT-LDT) algorithm is proposed to iteratively update PCE and sum rate by optimizing PA positions and power radiation ratios individually. Closed-form solutions are derived for both maximization problems. Numerical simulation results demonstrate that the proposed PASS-WPT framework significantly outperforms conventional MIMO and the baseline PASS with fixed power radiation, which demonstrates that: i) Compared to the conventional MIMO and baseline PASS, the proposed PASS-WPT framework achieves 81.45% and 43.19% improvements in PCE of EHRs, and ii) also increases the sum rate by 77.81% and 31.91% for IDRs.

eess.SP↗

arXiv2025

LLM Enabled Beam Training for Pinching Antenna Systems (PASS)

To enable intelligent beam training, a large language model (LLM)-enabled beam training framework is proposed for the pinching antenna system (PASS) in downlink multi-user multiple-input multiple-output (MIMO) communications. A novel LLM-based beam training supervised learning mechanism is developed, allowing context-aware and environment-adaptive probing for PASS to reduce overheads. Both single-user and multi-user cases are considered. 1) For single-user case, the LLM-based pinching beamforming codebook generation problem is formulated to maximize the beamforming gain. Then, the optimal transmit beamforming is obtained by maximum ratio transmission (MRT). 2) For multi-user case, a joint codebook generation and beam selection problem is formulated based on the system sum rate under the minimum mean square error (MMSE) transmit beamforming. The training labels for pinching beamforming are constructed by selecting the beam combination that maximizes system performance from each user's Top-S candidate beams. Based on pretrained Generative Pre-trained Transformers (GPTs), the LLM is trained in an end-to-end fashion to minimize the cross-entropy loss. Simulation results demonstrate that: i) For single-user case, the proposed LLM-enabled PASS attains over 95% Top-1 accuracy in beam selection and achieves 51.92% improvements in beamforming gains compared to conventional method. ii) For multi-user case, the proposed LLM-enabled PASS framework significantly outperforms both the LLM-based massive MIMO and conventional PASS beam training, achieving up to 57.14% and 33.33% improvements in sum rate, respectively.

eess.SP↗

arXiv2025

Channel-Aware Vector Quantization for Robust Semantic Communication on Discrete Channels

Deep learning-based semantic communication has largely relied on analog or semi-digital transmission, which limits compatibility with modern digital communication infrastructures. Recent studies have employed vector quantization (VQ) to enable discrete semantic transmission, yet existing methods neglect channel state information during codebook optimization, leading to suboptimal robustness. To bridge this gap, we propose a channel-aware vector quantization (CAVQ) algorithm within a joint source-channel coding (JSCC) framework, termed VQJSCC, established on a discrete memoryless channel. In this framework, semantic features are discretized and directly mapped to modulation constellation symbols, while CAVQ integrates channel transition probabilities into the quantization process, aligning easily confused symbols with semantically similar codewords. A multi-codebook alignment mechanism is further introduced to handle mismatches between codebook order and modulation order by decomposing the transmission stream into multiple independently optimized subchannels. Experimental results demonstrate that VQJSCC effectively mitigates the digital cliff effect, achieves superior reconstruction quality across various modulation schemes, and outperforms state-of-the-art digital semantic communication baselines in both robustness and efficiency.

eess.SP↗

arXiv2025

Joint Beamforming for NOMA Assisted Pinching Antenna Systems (PASS)

Pinching antenna system (PASS) configures the positions of pinching antennas (PAs) along dielectric waveguides to change both large-scale fading and small-scale scattering, which is known as pinching beamforming. A novel non-orthogonal multiple access (NOMA) assisted PASS framework is proposed for downlink multi-user multiple-input multiple-output (MIMO) communications. The transmit power minimization problem is formulated to jointly optimize the transmit beamforming, pinching beamforming, and power allocation. To solve this highly nonconvex problem, both gradient-based and swarm-based optimization methods are developed. 1) For gradient-based method, a majorization-minimization and penalty dual decomposition (MM-PDD) algorithm is developed. The Lipschitz gradient surrogate function is constructed based on MM to tackle the nonconvex terms of this problem. Then, the joint optimization problem is decomposed into subproblems that are alternatively optimized based on PDD to obtain stationary closed-form solutions. 2) For swarm-based method, a fast-convergent particle swarm optimization and zero forcing (PSO-ZF) algorithm is proposed. Specifically, the PA position-seeking particles are constructed to explore high-quality pinching beamforming solutions. Moreover, ZF-based transmit beamforming is utilized by each particle for fast fitness function evaluation. Simulation results demonstrate that: i) The proposed NOMA assisted PASS and algorithms outperforms the conventional NOMA assisted massive antenna system. The proposed framework reduces over 95.22% transmit power compared to conventional massive MIMO-NOMA systems. ii) Swarm-based optimization outperforms gradient-based optimization by searching effective solution subspace to avoid stuck in undesirable local optima.

cs.IT↗

arXiv2025

Modeling and Optimization of Transistor Voltage Amplifiers Based on Stochastic Thermodynamics

As transistor sizes reach the mesoscopic scale, the limitations of traditional methods in ensuring thermodynamic consistency have made power dissipation optimization in transistor amplifiers a critical challenge. Based on stochastic thermodynamics, a transistor voltage amplifier model is first proposed as a new insight to investigate nonlinear relationships between the power dissipation and voltage gain for complementary symmetric voltage amplifier circuits (CSVACs). Utilizing the proposed model, the phenomenon, i.e., the power dissipation exponentially increases with the increase of voltage gain in CSVACs, is first clarified by an analytical expression to quantify the impact of voltage gain and input signal amplitude on the power dissipation. Considering the characteristic of power dissipation, a new multistage architecture is proposed to reduce the power dissipation in CSVACs. To optimize the power dissipation by adjusting the number of stages and the voltage gain at each stage, an optimal multistage scheme is proposed for multistage CSVACs. Simulation and experimental results show up to 99.36% and 94.59% power dissipation reduction compared with traditional CSVACs by the proposed optimal multistage scheme, respectively.

eess.SP↗

arXiv2024

Prompt-Assisted Semantic Interference Cancellation on Moderate Interference Channels

The performance of conventional interference management strategies degrades when interference power is comparable to signal power. We consider a new perspective on interference management using semantic communication. Specifically, a multi-user semantic communication system is considered on moderate interference channels (ICs), for which a novel framework of deep learning-based prompt-assisted semantic interference cancellation (DeepPASIC) is proposed. Each transmitted signal is partitioned into common and private parts. The common parts of different users are transmitted simultaneously in a shared medium, resulting in superposition. The private part, on the other hand, serves as a prompt to assist in canceling the interference suffered by the common part at the semantic level. Simulation results demonstrate that the proposed DeepPASIC outperforms conventional interference management strategies under moderate interference conditions.

eess.SP↗

arXiv2023

6G Network AI Architecture for Everyone-Centric Customized Services

Mobile communication standards were developed for enhancing transmission and network performance by using more radio resources and improving spectrum and energy efficiency. How to effectively address diverse user requirements and guarantee everyone's Quality of Experience (QoE) remains an open problem. The Sixth Generation (6G) mobile systems will solve this problem by utilizing heterogenous network resources and pervasive intelligence to support everyone-centric customized services anywhere and anytime. In this article, we first coin the concept of Service Requirement Zone (SRZ) on the user side to characterize and visualize the integrated service requirements and preferences of specific tasks of individual users. On the system side, we further introduce the concept of User Satisfaction Ratio (USR) to evaluate the system's overall service ability of satisfying a variety of tasks with different SRZs. Then, we propose a network Artificial Intelligence (AI) architecture with integrated network resources and pervasive AI capabilities for supporting customized services with guaranteed QoEs. Finally, extensive simulations show that the proposed network AI architecture can consistently offer a higher USR performance than the cloud AI and edge AI architectures with respect to different task scheduling algorithms, random service requirements, and dynamic network conditions.

cs.NI↗

arXiv2023

Towards Net-Zero Carbon Emissions in Network AI for 6G and Beyond

A global effort has been initiated to reduce the worldwide greenhouse gas (GHG) emissions, primarily carbon emissions, by half by 2030 and reach net-zero by 2050. The development of 6G must also be compliant with this goal. Unfortunately, developing a sustainable and net-zero emission systems to meet the users' fast growing demands on mobile services, especially smart services and applications, may be much more challenging than expected. Particularly, despite the energy efficiency improvement in both hardware and software designs, the overall energy consumption and carbon emission of mobile networks are still increasing at a tremendous speed. The growing penetration of resource-demanding AI algorithms and solutions further exacerbate this challenge. In this article, we identify the major emission sources and introduce an evaluation framework for analyzing the lifecycle of network AI implementations. A novel joint dynamic energy trading and task allocation optimization framework, called DETA, has been introduced to reduce the overall carbon emissions. We consider a federated edge intelligence-based network AI system as a case study to verify the effectiveness of our proposed solution. Experimental results based on a hardware prototype suggest that our proposed solution can reduce carbon emissions of network AI systems by up to 74.9%. Finally, open problems and future directions are discussed.

cs.NI↗

arXiv2023

Information Energy Ratio of XOR Logic Gate at Mesoscopic Scale

As the size of transistors approaches the mesoscopic scale, existing energy consumption analysis methods exhibit various limits, especially when being applied to describe the non-equilibrium information processing of transistors at ultra-low voltages. The stochastic thermodynamics offers a theoretic tool to analyze the energy consumption of transistor during the non-equilibrium information processing. Based on this theory, an information energy ratio of XOR gate composed of single-electron transistors is proposed at the mesoscopic scale, which can be used to quantify the exchange between the information and energy at XOR gates. Furthermore, the energy efficiency of the parity check circuit is proposed to analyze the energy consumption of digital signal processing systems. Compared with the energy efficiency of parity check circuit adopting the 7 nm semiconductor process supply voltage, simulation results show that the energy efficiency of the parity check circuit is improved by 266% when the supply voltage is chosen at a specified value.

cs.IT↗

arXiv2023

Entropy-Based Energy Dissipation Analysis of Mobile Communication Systems

Compared with the energy efficiency of conventional mobile communication systems, the energy efficiency of fifth generation (5G) communication systems has been improved more than 30 times. However, the energy consumption of 5G communication systems is 3 times of the energy consumption of fourth generation (4G) communication systems when the wireless traffic is increased more than 100 times in the last decade. It is anticipated that the traffic of future sixth generation (6G) communication systems will keep an exponential growth in the next decade. It is a key issue how much space is left for improving of energy efficiency in mobile communication systems. To answer the question, an entropy-based energy dissipation model based on nonequilibrium thermodynamics is first proposed for mobile communication systems. Moreover, the theoretical minimal energy dissipation limits are derived for typical modulations in mobile communication systems. Simulation results show that the practical energy dissipation of information processing and information transmission is three and seven orders of magnitude away from the theoretical minimal energy dissipation limits in mobile communication systems, respectively. These results provide some guidelines for energy efficiency optimization in future mobile communication systems.

cs.IT↗

arXiv2022

Reliable Distributed Computing for Metaverse: A Hierarchical Game-Theoretic Approach

The metaverse is regarded as a new wave of technological transformation that provides a virtual space for people to interact through digital avatars. To achieve immersive user experiences in the metaverse, real-time rendering is the key technology. However, computing-intensive tasks of real-time rendering from metaverse service providers cannot be processed efficiently on a single resource-limited mobile device. Alternatively, such mobile devices can offload the metaverse rendering tasks to other mobile devices by adopting the collaborative computing paradigm based on Coded Distributed Computing (CDC). Therefore, this paper introduces a hierarchical game-theoretic CDC framework for the metaverse services, especially for the vehicular metaverse. In the framework, idle resources from vehicles, acting as CDC workers, are aggregated to handle intensive computation tasks in the vehicular metaverse. Specifically, in the upper layer, a miner coalition formation game is formulated based on a reputation metric to select reliable workers. To guarantee the reliable management of reputation values, the reputation values calculated based on the subjective logical model are maintained in a blockchain database. In the lower layer, a Stackelberg game-based incentive mechanism is considered to attract reliable workers selected in the upper layer to participate in rendering tasks. The simulation results illustrate that the proposed framework is resistant to malicious workers. Compared with the best-effort worker selection scheme, the proposed scheme can improve the utility of metaverse service provider and the average profit of CDC workers.

cs.NI↗

arXiv2022

Carnot machine-based massive MIMO communication capacity modeling and performance analysis

Similar to the energy flowing process in traditional heat engines, information could be considered to flow in the communication systems with the form of energy and entropy. Combining the thermodynamic Carnot machine and the classical Shannon information theory, a generalized thermodynamic MIMO (multiple input multiple outputs) communication system is established to analyze the channel capacity using forward error correction codes. Based on the concepts of freedom and entropy in the communication system, the generalized channel capacity is proposed under the thermodynamic theory. Furthermore, the relationships between the proposed channel capacity and the noise freedom and coding overhead are derived and simulated. Simulation results verify the proposed channel capacity is coincident with the classical channel capacity.

cs.IT↗

arXiv2022

User-Centric Cooperative Transmissions-enabled Handover for Ultra-Dense Networks

The user-centric cooperative transmission provides a compelling way to alleviate frequent handovers caused by an ever-increasing number of randomly deployed base stations (BSs) in ultra-dense networks (UDNs). This paper proposes a new user-centric cooperative transmissions-based handover scheme, i.e., the group-cell handover (GCHO) scheme, with the aim of reducing the handover rate in UDNs. In the proposed scheme, the boundary of the cooperating cluster depends on the distance among the user equipment (UE) and cooperating BSs. The new scheme captures the dynamicity and irregularity of the cooperating cluster topology resulting from randomly distributed BSs. Based on stochastic-geometry tools where BSs locations are modeled as the Poison point process (PPP), we derive an analytical expression of the handover rate for the UE with an arbitrary movement trajectory. Furthermore, a GCHO skipping (GCHO-S) scheme is proposed to minimize the handover cost, i.e., the percentage of time wasted in handover signaling in user-centric cooperative transmissions scenarios. The numerical results show that the GCHO scheme decreases the handover rate by 42.3% and 72.7% compared with the traditional single BS association and fixed-region cooperative network topology handover approaches, respectively. Moreover, under the same group-cell size and constant velocity, the GCHO-S scheme diminishes the handover cost by 50% against the GCHO scheme.

cs.NI↗

arXiv2021

Modelling and Optimization of OAM-MIMO Communication Systems with Unaligned Antennas

The orbital angular momentum (OAM) wireless communication technique is emerging as one of potential techniques for the Sixth generation (6G) wireless communication system. The most advantage of OAM wireless communication technique is the natural orthogonality among different OAM states. However, one of the most disadvantages is the crosstalk among different OAM states which is widely caused by the atmospheric turbulence and misalignment between transmitting and receiving antennas. Considering the OAM-based multiple-input multiple-output (OAM-MIMO) transmission system with unaligned antennas, a new channel model is proposed for performance analysis. Moreover, a purity model of the OAM-MIMO transmission system with unaligned antennas is derived for the non-Kolmogorov turbulence. Furthermore, error probability and capacity models are derived for OAM-MIMO transmission systems with unaligned antennas. To overcome the disadvantage caused by unaligned antennas and non-Kolmogorov turbulence, a new optimization algorithm of OAM state interval is proposed to improve the capacity of OAM-MIMO transmission system. Numerical results indicate that the capacity of OAM-MIMO transmission system is improved by the optimization algorithm. Specifically, the capacity increment of OAM-MIMO transmission system adopting the optimization algorithm is up to 28.7% and 320.3% when the angle of deflection between transmitting and receiving antennas is -24 dB and -5 dB, respectively.

cs.NI↗

arXiv2020

Effect of Spatial and Temporal Traffic Statistics on the Performance of Wireless Networks

The traffic in wireless networks has become diverse and fluctuating both spatially and temporally due to the emergence of new wireless applications and the complexity of scenarios. The purpose of this paper is to quantitatively analyze the impact of the wireless traffic, which fluctuates both spatially and temporally, on the performance of the wireless networks. Specially, we propose to combine the tools from stochastic geometry and queueing theory to model the spatial and temporal fluctuation of traffic, which to our best knowledge has seldom been evaluated analytically. We derive the spatial and temporal statistics, the total arrival rate, the stability of queues and the delay of users by considering two different spatial properties of traffic, i.e., the uniformly and non-uniformly distributed cases. The numerical results indicate that although the fluctuation of traffic (reflected by the variance of total arrival rate) when the users are clustered is much fiercer than that when the users are uniformly distributed, the unstable probability is smaller. Our work provides a useful reference for the design of wireless networks when the complex spatio-temporal fluctuation of the traffic is considered.

cs.NI↗